Pages with lots of images "jam" Firefox
Whenever I try to open a page that has lots of images, it only load partially before Firefox becomes completely unable to load webpages until I restart Firefox. I have already created a clean profile and reinstalled Firefox.
I haven't gotten around to installing antivirus (or anything else, for that matter).
If I watch in Task Manager, Firefox.exe goes to 100% as soon as I load the page.
And no, that guide didn't help much. I don't have any addons or plugins yet, this is a new install.
I got a huge slowdown a bit ago, it's because it was using almost 1.5GB of RAM o_o
Similar Messages
-
Firefox uses all CPU resources when loading pages with lots of images.
I just installed XP, and when I load pages with a ton of images, say, tumblr, Firefox uses ALL CPU time until it finishes loading.
But because of the slowdown, it takes forever to download all the images.
It's not related to my connection, I've got 15mbit downstream.
I have Win7 on a different partition, and I have never had this problem.
As far as I know, all my drivers and XP are up to date.
I could have an old driver lurking, should I be looking at something specific?
I've tried to find something on Google, but I've not found anything really helpful...I haven't gotten around to installing antivirus (or anything else, for that matter).
If I watch in Task Manager, Firefox.exe goes to 100% as soon as I load the page.
And no, that guide didn't help much. I don't have any addons or plugins yet, this is a new install.
I got a huge slowdown a bit ago, it's because it was using almost 1.5GB of RAM o_o -
When loading a page with many hires images, Firefox becomes really slow and scrolling becomes jumpy then eventually becomes completely unresponsive. Unusual high memory usage of up to 2gigs just for firefox when loading these pages. This was never a problem with v3.6.
I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy... -
How to fill an 8x10 page with the same image for making buttons?
How do you make a button template using the grid? How do you import the image onto that, and how do you fill an entire page with the same image ie- 1" circles
I'm trying to do the same thing but I want 1" squares. I just upgraded from Elements 6 and I did this
quite often for pendant necklaces. I used to go and print individual prints, but the previous options are not there. ;(
And the picture package is only showing 20 (2x2) as being the smallest size. I don't see a custom button.
Can anyone tell me how to do this? We're doing these for a fundraiser and I can't even print anymore.
Thanks,
Kimberly -
How do I create photo page with blow up images on click?
I need some help trying to create a web page of photo thumbnails with blow-up larger images:
1) I want to create a contact sheet type of web page of multiple photo thumbnails.
2) When you click the photo it opens into a small window or "blow-up" version of the thumbnail. (Clicking the thumbnail does NOT take you to a new page with the full size image).
3) The blow-up photo has a circle and X that will close the blow-up window.
I've already figured out how create pages of thumbnails that will take you to a new page with the full size image. I'm trying to create the effect where you never leave the main page, the thumbnails just blow-up into small windows that can be closed again.
Apple uses this effect a lot with photos and movie clips on their page. An example of what I am trying to do can be found on the iLife/iPhoto/MobileMeGallery info page at Apple.
If you look to the right just under the main large banner images, there is a grey box titled "iPhoto Showcase." If you click one of the thumbnails there, the picture blows out to a larger size of the image, but doesn't take you to another page. The blow-up image has a little circle and X at the top left to close the window. Main page is still visible behind the blow-up window.
I'm using a fairly new MacBook with OS 10.5, iPhoto and iWeb '08. I also have Aperture 2.0. I don't have a .Mac or MobileMe account yet. I'm a recent convert from the Darkside, so right now I use google's Picasa Web Albums and google's website creator for my site. If I can get this to work, I'll make the switch MobileMe once the early .Mac conversion kinks get worked out.
Thanks,
TDizzle...Cyclosaurus--
That's the effect that I'm looking for. I've read through the instructions on Cabel's website (thanks for the great links!) But I'm afraid I'm still a bit of a novice with website creation and editing. I liked your iWeb examples, so I have a few follow-up questions about how to integrate this with iWeb.
1) Do you use iWeb and .Mac/MobileMe to publish your site? I already own a domain and have been using google's online page creator tools to create some very basic pages. For picture pages, I just put up links to my Picasa web albums. But the google user interface and options (no FTP upload) are even more limited than iWeb and .Mac. With 20GB of storage, plus the other features and ability for integration, MobileMe sounds enticing for the price.
2) At what point do you add the code to the pages in the edit and publish process? What are the exact steps you use to publish? (Create and edit in iWeb, add html code, publish to folder or publish straight to .Mac/MobileMe, etc.)
3) If you make changes to pages in iWeb, do you have to keep adding the code to the pages and repeat the steps from above question?
4) What app do you use to edit the html code? No html edit function in iWeb, so I tried opening the "page.html" files in TextEdit but the page just looked like a web page. No code. How do I get the text of the html code to open in TextEdit or another app?
5) Do the lines of code (2 lines in "head" and 1 line in "body") need to be added to every page that I want to use the effect?
6) How do you upload the two FancyZoom folders to a .Mac/MobileMe account site? And where exactly do they need to be placed?
Thanks,
TDizzle... -
How do I create photo page with blow up images?
I need some help trying to create a web page of photo thumbnails with blow-up larger images:
1) I want to create a contact sheet type of web page of multiple photo thumbnails.
2) When you click the photo it opens into a small window or "blow-up" version of the thumbnail. (Clicking the thumbnail does NOT take you to a new page with the full size image).
3) The blow-up photo has a circle and X that will close the blow-up window.
I've already figured out how create pages of thumbnails that will take you to a new page with the full size image. I'm trying to create the effect where you never leave the main page, the thumbnails just blow-up into small windows that can be closed again.
Apple uses this effect a lot with photos and movie clips on their page. An example of what I am trying to do can be found on the iLife/iPhoto/MobileMe Gallery info page.
http://www.apple.com/ilife/iphoto/#mobilemegallery
If you look to the right just under the main large banner images, there is a grey box titled "iPhoto Showcase." If you click one of the thumbnails there, the picture blows out to a larger size of the image, but doesn't take you to another page. The blow-up image has a little circle and X at the top left to close the window. Main page is still visible behind the blow-up window.
I think this post mentions what I'm trying to do, but they seem to be having problems getting it to work. I need help creating this effect from scratch.
http://discussions.apple.com/thread.jspa?threadID=1609046
I'm using a fairly new MacBook with OS 10.5, iPhoto and iWeb '08. I also have Aperture 2.0. I don't have a .Mac or MobileMe account yet. I'm a recent convert from the Darkside, so right now I use google's Picasa Web Albums and google's website creator for my site. If I can get this to work, I'll make the switch MobileMe once the early .Mac conversion kinks get worked out.
Thanks,
TDizzle...Cyclosaurus--
That's the effect that I'm looking for. I've read through the instructions on Cabel's website (thanks for the great links!) But I'm afraid I'm still a bit of a novice with website creation and editing. I liked your iWeb examples, so I have a few follow-up questions about how to integrate this with iWeb.
1) Do you use iWeb and .Mac/MobileMe to publish your site? I already own a domain and have been using google's online page creator tools to create some very basic pages. For picture pages, I just put up links to my Picasa web albums. But the google user interface and options (no FTP upload) are even more limited than iWeb and .Mac. With 20GB of storage, plus the other features and ability for integration, MobileMe sounds enticing for the price.
2) At what point do you add the code to the pages in the edit and publish process? What are the exact steps you use to publish? (Create and edit in iWeb, add html code, publish to folder or publish straight to .Mac/MobileMe, etc.)
3) If you make changes to pages in iWeb, do you have to keep adding the code to the pages and repeat the steps from above question?
4) What app do you use to edit the html code? No html edit function in iWeb, so I tried opening the "page.html" files in TextEdit but the page just looked like a web page. No code. How do I get the text of the html code to open in TextEdit or another app?
5) Do the lines of code (2 lines in "head" and 1 line in "body") need to be added to every page that I want to use the effect?
6) How do you upload the two FancyZoom folders to a .Mac/MobileMe account site? And where exactly do they need to be placed?
Thanks,
TDizzle... -
Photo Page with lots of pix - any way to jump to the last page?
I have a photo album with 112 pix in it, and it's set to display 21 photos per page w/ 3 columns. This makes for a total of 6 pages.
The way the page navigation shows up, at least in Safari, is as follows:
< 1 2 3 4 >
Oddly, in iWeb it shows:
< 1 2 3 4 5>
I continually am adding photos to this album, but I think that people may not realize that there are more than 4 pages. The only clue is that the right arrow is not grayed out, which is too subtle.
If you click on the "4", and then click the right arrow, it now displays 1-5 like in iWeb. Clicking on it one more time then displays 2-6.
If all of the pages can't be displayed for space reasons, some indication of how many pages total would be helpful, and/or a "last" link to jump to the last page.
On this discussions site, for example, doing a search with multiple pages of results brings up the following:
Pages: 12 *| 1 2 3 4 5 6 7 8 9 10 | Next |*
This makes it obvious how much content there is, and how far you have to go to get to the end. Is there any way to get something similar on an iWeb page? I think people are missing my latest additions because they don't know they're there, and there's no easy way to get to the newest stuff.
Thanks!I couldn't get the other "jump to the last page" script to work at all; it winds up screwing up the display to where it shows two pages at a time slightly offset from one another.
It's more likely that you web host servers take time to serve the page and its element, I ran into similar problem while helping out another person in this forum.
But, while I'm finally seeing the page count directly above the page navigation numbers, it's indicating that there are 7 pages when in fact there are 8, and I'm wondering why it disappears after changing to any other page (it doesn't reappear even on the first page without doing a refresh). I've tried this with the same results in Safari 3.1.2 & Firefox 3.01.
My bad, all these computing have concept of zero , I messed up with that
I also found that the bottom paginate navigation cause problem, so I added more code to handle that.
The result may not be desired but cause the page count flashed when you go from one page to the next, quite annoying. Give this a try:
<script type='text/javascript'>
var headerControlsWidget;
var footerControlsWidget;
function setPageCount() {
try {
headerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-headercontrols')[ 0].widget;
if (headerControlsWidget) {
footerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-footercontrols')[ 0].widget;
entriesPerPage = headerControlsWidget.preferences.entriesPerPage;
entriesCount = headerControlsWidget.preferences.entryCount;
pageCount = parseInt(entriesCount/entriesPerPage) + 1; // adjust to true count, if needed;
newDiv = parent.document.createElement('div');
newDiv.id = 'pageCount';
newDiv.innerHTML = 'Pages: ' + pageCount;
if (!(parent.document.getElementById('pageCount'))) {
paginateDiv = parent.document.getElementById(headerControlsWidget.instanceID + '-pagination_controls')
paginateDiv.insertBefore(newDiv, paginateDiv.firstChild);
} catch(e) {}
function initPageCount() {
setPageCount();
headerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-headercontrols')[ 0].widget;
paginateDiv = parent.document.getElementById(headerControlsWidget.instanceID + '-pagination_controls')
paginateDiv.addEventListener('click', function() {setTimeout('setPageCount()', 250);});
footerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-footercontrols')[ 0].widget;
paginateDiv = parent.document.getElementById(footerControlsWidget.instanceID + '-pagination_controls')
paginateDiv.addEventListener('click', function() {setTimeout('setPageCount()', 250);});
clearInterval(chkHdrCntl);
chkHdrCntl = setInterval('initPageCount()', 500);
</script> -
Creating an HTML page with an embedded image in JAVA
is it possible to have a code in java that creates an HTML page,
reads an image file and embeds this to the HTML page?
can anyone give me a sample code? =)
thank you very much!Just tried this out, and it doesn't do what I was hoping: embed the image into the HTML document as a byte stream, so that the HTML document will display the image, without a seperate file.
When I did:
import java.io.*;
public class EmbeddedImageTest {
public static void writeHTML(String htmlfile) {
File htmf = new File(htmlfile);
FileOutputStream fout;
DataOutput dout;
try {
fout = new FileOutputStream(htmf);
dout = new DataOutputStream(fout);
dout.writeBytes("<html><head></head><body><img src=" +
"file:/C:/image.jpg></body></html>");
catch(IOException ie) {
ie.printStackTrace();
public static void main(String[] args) {
writeHTML("c:/embeddedImage.html");
}I just got an HTML file containing "<html><head></head><body><img src=file:/C:/image.jpg></body></html>".
I've seen images get embedded in MS Outlook HTML e-mails. Does anyone know if this is done in a standard way (ie not through some MS-proprietary way), and if it can be done with an HTML file made by Java? -
This problem is with Firefox 3.6.15 and also in the previous version. I've tried reinstalling but no joy.
This happens a lot. Several times a day. Very irritating. I keep losing work I've typed into a text box or email, or having to go back to the beginning of things (such as audio or video) because it has reloaded in a window.
I have McAfee security which checks the computer every week and removes virus and malware so I'm pretty confident there's no problem with that.
I'm sometimes so plagued by this problem that I have to switch to other browsers (I have Chrome, Safari and IE installed) and have not experienced any similar problem with those.
The problem does not seem to be in conjunction with any plugins. Although I have plugins installed the problem happens when none of the plugins is noticeably in use.This problem is with Firefox 3.6.15 and also in the previous version. I've tried reinstalling but no joy.
This happens a lot. Several times a day. Very irritating. I keep losing work I've typed into a text box or email, or having to go back to the beginning of things (such as audio or video) because it has reloaded in a window.
I have McAfee security which checks the computer every week and removes virus and malware so I'm pretty confident there's no problem with that.
I'm sometimes so plagued by this problem that I have to switch to other browsers (I have Chrome, Safari and IE installed) and have not experienced any similar problem with those.
The problem does not seem to be in conjunction with any plugins. Although I have plugins installed the problem happens when none of the plugins is noticeably in use. -
Converting PDF to EPUB with lots of images
Greetings everyone,
I am rather new to indesign and e-publishing and trying to get a handle on how to do this properly. I am a professional photographer with years of work and have decided to create a few photo e-books. Not actually how to, but beauty, something like a coffe table photo essay, photo story book. You get the idea, mainly photos and very little text. So here I am looking to make a ebook without lots of text. I guess mainly the opposite of what most ebooks are? I have created a few of them in indesign cs6 as a pdf and they look great ! I have tried to convert them to epub and what text I do have and or backgrounds go all over the place! obviously i'm doing something wrong! Looking for some guidence on how to make this work? I have worked with photoshop, premier, after effects since day one of their creation so i do have somewhat of knowledge in adobe but not for this... thanks !!!
sincerely
kevin cableHi laras54426173,
Are you converting via Adobe Reader or the web interface? Do you see the JPEG option when you're logged on to https://cloud.acrobat.com/exportpdf?
Best,
Sara -
Page with MM_editAction wont work in Firefox on form submit..
Hi Guys,
I have a form that adds a record to my database and the user
uses this to apply for membership.. there are some scripts that
check usernames ect... This all works in IE
But In firefox it fails when the Jacascript tries to submit
the form after it checks the fields are OK and it does nothing??
If i fill the form in with errors in my application my
javascript is running and picking up the errorrs and tells the user
and I have alerts in there now and I can see the javascript is fine
right up to the last line and its just the usuall way to submit a
form I guess??
Code:
// My checking function is here....
// If the script gets this far through all of your fields
// without problems, it's ok and you can submit the form
// If all was OK then this fires in the else statment...
else
event.returnValue=true;
alert('All Fields OK'); // alert just for my benifit to see
if im getting to this point.
document.form2.submit();
My script does its checks and the forms action has this to
add the record...
<form method="POST" action="<%=MM_editAction%>"
name="form2" id="form2">
So the user fills in my form and hits submit and nothing
happens unless you use Internet Explorer? In firefox I dont get the
alert box firing the message "'All Fields OK'" even though they are
all filled in OK and no form gets submitted??
If anyone can help me figure this out id be greatfull.
Thank youHi Mick..
My button is just named "Button" could this be a problem as
its of the type button?
Anayway here is my Javascript that checks my forms elements..
<script type="text/javascript">
<!--
function checkForm()
alert('Into Check Function');
TxtName=form2.Name.value;
TxtUserName=form2.Username.value;
TxtPassword=form2.Password.value;
TxtEmail=form2.email.value;
TxtLocation=form2.location.value;
TxtDescription=form2.description.value;
TxtFavFood =form2.FavFood.value;
if (TxtName=='')
alert('Your Name is a required field. Please try again.');
form2.Name.focus();
event.returnValue=false;
else if (TxtUserName=='')
alert('Your Username is a required field. Please try
again.');
form2.Username.focus();
event.returnValue=false;
else if (TxtPassword=='')
alert('Your Password is a required field. Please try
again.');
form2.Password.focus();
event.returnValue=false;
else if (TxtFavFood=='')
alert('You need to answer what your favorite food is for a
later password reminder');
form2.FavFood.focus();
event.returnValue=false;
else if (TxtEmail=='')
alert('Your Email Address is a required field. Please try
again.');
form2.email.focus();
event.returnValue=false;
else if (echeck(TxtEmail)==false)
form2.email.focus();
event.returnValue=false;
else if (TxtLocation=='')
alert('Your Location is a required field. Please try
again.');
form2.location.focus();
event.returnValue=false;
else if (TxtDescription=='')
alert('Your Reason For Joining is a required field. Please
try again.');
form2.description.focus();
event.returnValue=false;
// If the script gets this far through all of your fields
// without problems, it's ok and you can submit the form
else
event.returnValue=true;
alert('All Fields OK'); // This bit never fires in firefox
document.getElementById("form2").submit() // Tried this to
see if it made a change?
//window.document.form2.submit(); // This was my origonal
submit.
// -->
</script>
Thanks again -
Xorg crashes when Firefox loads a lot of images; Intel driver bug?
For some time now I'm seeing a weird error. Basically, when I load a *lot* of images in Firefox, Xorg crashes completely. In Xorg logfile I can see the following error:
[ 2993.177] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption or even a frozen display: No space left on device.
[ 2993.180]
[ 2993.180] Backtrace:
[ 2993.214] 0: /usr/bin/X (xorg_backtrace+0x49) [0x81b6bb9]
[ 2993.214] 1: /usr/bin/X (0x8048000+0x172816) [0x81ba816]
[ 2993.214] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb77b140c]
[ 2993.214] 3: /lib/libc.so.6 (0xb7412000+0x12dd10) [0xb753fd10]
[ 2993.214] 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb71dd000+0xe51c) [0xb71eb51c]
[ 2993.214] 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb71dd000+0x105c4) [0xb71ed5c4]
[ 2993.214] 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb71dd000+0x3248d) [0xb720f48d]
[ 2993.214] 7: /usr/bin/X (0x8048000+0xfb844) [0x8143844]
[ 2993.214] 8: /usr/bin/X (0x8048000+0x2b84f) [0x807384f]
[ 2993.214] 9: /usr/bin/X (0x8048000+0x2f0ad) [0x80770ad]
[ 2993.214] 10: /usr/bin/X (0x8048000+0x1ccd5) [0x8064cd5]
[ 2993.214] 11: /lib/libc.so.6 (__libc_start_main+0xf5) [0xb742b3d5]
[ 2993.214] 12: /usr/bin/X (0x8048000+0x1d019) [0x8065019]
[ 2993.214]
[ 2993.214] Bus error at address 0xb2f8a748
[ 2993.214]
Fatal server error:
[ 2993.214] Caught signal 7 (Bus error). Server aborting
I have an Intel GMA 945 and I'm using x586-video-intel and intel-dri.
It is interesting to see that these crashes happen as soon as the total memory used by Linux approaches/reaches my physical memory size of 2 GB. I should note that I have an SSD - so I do not use swap. With total memory used I mean memory that programs use plus cached memory, so my memory isn't actually "full" since the kernel could just free some cached memory to accommodate the memory Firefox needs. But this is not what happens: as soon as all of the memory is used, Xorg crashes in this scenario. I can prolong the time of crash by manually freeing the cached memory before, but again, as soon as the memory that "free -m" reports as used approaches my physical limit of 2 GB, I get a crash.
Note that this is not an OOM Killer issue. OOM Killer doesn't do anything (and it shouldn't: the cached memory is available to the system, after all).
I'm willing to test out any suggestions. My guess is that there is a bug in the intel driver but I rather be sure beforehand.
Last edited by Natanji (2012-04-30 06:38:45)I dont know if this is something related but here is my Xorg.0.log.old:
See at the end the 'Bus error at address' error:
[ 8.527]
X.Org X Server 1.12.1
Release Date: 2012-04-13
[ 8.527] X Protocol Version 11, Revision 0
[ 8.527] Build Operating System: Linux 3.3.2-1-ARCH x86_64
[ 8.527] Current Operating System: Linux echelon 3.3.6-1-ARCH #1 SMP PREEMPT Sun May 13 10:52:32 CEST 2012 x86_64
[ 8.527] Kernel command line: root=/dev/sda5 ro
[ 8.527] Build Date: 15 April 2012 09:55:35AM
[ 8.527]
[ 8.527] Current version of pixman: 0.24.4
[ 8.527] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 8.527] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 8.527] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 18 09:34:54 2012
[ 8.626] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 8.652] (==) No Layout section. Using the first Screen section.
[ 8.652] (==) No screen section available. Using defaults.
[ 8.652] (**) |-->Screen "Default Screen Section" (0)
[ 8.652] (**) | |-->Monitor "<default monitor>"
[ 8.652] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.652] (==) Automatically adding devices
[ 8.652] (==) Automatically enabling devices
[ 8.721] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.721] Entry deleted from font path.
[ 8.773] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 8.773] Entry deleted from font path.
[ 8.773] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 8.799] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 8.799] Entry deleted from font path.
[ 8.799] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 8.799] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 8.799] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.799] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.800] (II) Loader magic: 0x7c5160
[ 8.800] (II) Module ABI versions:
[ 8.800] X.Org ANSI C Emulation: 0.4
[ 8.800] X.Org Video Driver: 12.0
[ 8.800] X.Org XInput driver : 16.0
[ 8.800] X.Org Server Extension : 6.0
[ 8.800] (--) PCI:*(0:1:0:0) 1002:7142:1462:3000 rev 0, Mem @ 0xe0000000/67108864, 0xe5000000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 8.800] (--) PCI: (0:1:0:1) 1002:7162:1462:3001 rev 0, Mem @ 0xe5010000/65536
[ 8.800] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 8.800] (II) LoadModule: "extmod"
[ 8.868] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 8.891] (II) Module extmod: vendor="X.Org Foundation"
[ 8.891] compiled for 1.12.1, module version = 1.0.0
[ 8.891] Module class: X.Org Server Extension
[ 8.891] ABI class: X.Org Server Extension, version 6.0
[ 8.891] (II) Loading extension MIT-SCREEN-SAVER
[ 8.891] (II) Loading extension XFree86-VidModeExtension
[ 8.891] (II) Loading extension XFree86-DGA
[ 8.891] (II) Loading extension DPMS
[ 8.891] (II) Loading extension XVideo
[ 8.891] (II) Loading extension XVideo-MotionCompensation
[ 8.891] (II) Loading extension X-Resource
[ 8.891] (II) LoadModule: "dbe"
[ 8.892] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 8.913] (II) Module dbe: vendor="X.Org Foundation"
[ 8.913] compiled for 1.12.1, module version = 1.0.0
[ 8.913] Module class: X.Org Server Extension
[ 8.913] ABI class: X.Org Server Extension, version 6.0
[ 8.913] (II) Loading extension DOUBLE-BUFFER
[ 8.913] (II) LoadModule: "glx"
[ 8.913] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.940] (II) Module glx: vendor="X.Org Foundation"
[ 8.942] compiled for 1.12.1, module version = 1.0.0
[ 8.943] ABI class: X.Org Server Extension, version 6.0
[ 8.943] (==) AIGLX enabled
[ 8.943] (II) Loading extension GLX
[ 8.970] (II) LoadModule: "record"
[ 8.970] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 9.003] (II) Module record: vendor="X.Org Foundation"
[ 9.003] compiled for 1.12.1, module version = 1.13.0
[ 9.003] Module class: X.Org Server Extension
[ 9.003] ABI class: X.Org Server Extension, version 6.0
[ 9.003] (II) Loading extension RECORD
[ 9.003] (II) LoadModule: "dri"
[ 9.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 9.038] (II) Module dri: vendor="X.Org Foundation"
[ 9.038] compiled for 1.12.1, module version = 1.0.0
[ 9.038] ABI class: X.Org Server Extension, version 6.0
[ 9.038] (II) Loading extension XFree86-DRI
[ 9.038] (II) LoadModule: "dri2"
[ 9.038] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 9.058] (II) Module dri2: vendor="X.Org Foundation"
[ 9.058] compiled for 1.12.1, module version = 1.2.0
[ 9.058] ABI class: X.Org Server Extension, version 6.0
[ 9.058] (II) Loading extension DRI2
[ 9.058] (==) Matched ati as autoconfigured driver 0
[ 9.058] (==) Matched vesa as autoconfigured driver 1
[ 9.058] (==) Matched fbdev as autoconfigured driver 2
[ 9.058] (==) Assigned the driver to the xf86ConfigLayout
[ 9.058] (II) LoadModule: "ati"
[ 9.087] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 9.091] (II) Module ati: vendor="X.Org Foundation"
[ 9.091] compiled for 1.12.1, module version = 6.14.4
[ 9.091] Module class: X.Org Video Driver
[ 9.091] ABI class: X.Org Video Driver, version 12.0
[ 9.091] (II) LoadModule: "radeon"
[ 9.091] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 9.197] (II) Module radeon: vendor="X.Org Foundation"
[ 9.218] compiled for 1.12.1, module version = 6.14.4
[ 9.218] Module class: X.Org Video Driver
[ 9.218] ABI class: X.Org Video Driver, version 12.0
[ 9.231] (II) LoadModule: "vesa"
[ 9.231] (WW) Warning, couldn't open module vesa
[ 9.231] (II) UnloadModule: "vesa"
[ 9.231] (II) Unloading vesa
[ 9.231] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 9.231] (II) LoadModule: "fbdev"
[ 9.231] (WW) Warning, couldn't open module fbdev
[ 9.231] (II) UnloadModule: "fbdev"
[ 9.231] (II) Unloading fbdev
[ 9.231] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 9.231] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA
[ 9.234] (++) using VT number 7
[ 9.238] (II) [KMS] Kernel modesetting enabled.
[ 9.238] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 9.238] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 9.238] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 9.238] (==) RADEON(0): Default visual is TrueColor
[ 9.238] (==) RADEON(0): RGB weight 888
[ 9.238] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 9.238] (--) RADEON(0): Chipset: "ATI Radeon X1300/X1550" (ChipID = 0x7142)
[ 9.238] (II) RADEON(0): PCIE card detected
[ 9.238] drmOpenDevice: node name is /dev/dri/card0
[ 9.238] drmOpenDevice: open result is 8, (OK)
[ 9.238] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 9.238] drmOpenDevice: node name is /dev/dri/card0
[ 9.238] drmOpenDevice: open result is 8, (OK)
[ 9.238] drmOpenByBusid: drmOpenMinor returns 8
[ 9.238] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 9.238] (II) Loading sub module "exa"
[ 9.238] (II) LoadModule: "exa"
[ 9.238] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 9.256] (II) Module exa: vendor="X.Org Foundation"
[ 9.256] compiled for 1.12.1, module version = 2.5.0
[ 9.256] ABI class: X.Org Video Driver, version 12.0
[ 9.256] (II) RADEON(0): KMS Color Tiling: enabled
[ 9.256] (II) RADEON(0): KMS Pageflipping: enabled
[ 9.256] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 9.314] (II) RADEON(0): Output VGA-0 has no monitor section
[ 9.347] (II) RADEON(0): Output S-video has no monitor section
[ 9.405] (II) RADEON(0): Output DVI-0 has no monitor section
[ 9.463] (II) RADEON(0): EDID for output VGA-0
[ 9.463] (II) RADEON(0): Manufacturer: FUS Model: 7c7 Serial#: 1
[ 9.463] (II) RADEON(0): Year: 2009 Week: 53
[ 9.463] (II) RADEON(0): EDID Version: 1.3
[ 9.463] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 9.463] (II) RADEON(0): Sync: Separate
[ 9.463] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 9.463] (II) RADEON(0): Gamma: 2.30
[ 9.463] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[ 9.463] (II) RADEON(0): First detailed timing is preferred mode
[ 9.463] (II) RADEON(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.605
[ 9.463] (II) RADEON(0): blueX: 0.152 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
[ 9.463] (II) RADEON(0): Supported established timings:
[ 9.463] (II) RADEON(0): 720x400@70Hz
[ 9.463] (II) RADEON(0): 640x480@60Hz
[ 9.463] (II) RADEON(0): 640x480@75Hz
[ 9.463] (II) RADEON(0): 800x600@60Hz
[ 9.463] (II) RADEON(0): 800x600@75Hz
[ 9.463] (II) RADEON(0): 1024x768@60Hz
[ 9.463] (II) RADEON(0): 1024x768@75Hz
[ 9.463] (II) RADEON(0): 1280x1024@75Hz
[ 9.463] (II) RADEON(0): Manufacturer's mask: 0
[ 9.463] (II) RADEON(0): Supported standard timings:
[ 9.463] (II) RADEON(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 9.463] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 9.463] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 9.463] (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 9.463] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 9.463] (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 9.463] (II) RADEON(0): #6: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 9.463] (II) RADEON(0): Supported detailed timing:
[ 9.463] (II) RADEON(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 9.463] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 9.463] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 9.463] (II) RADEON(0): Serial No: YV1U055401
[ 9.463] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 9.463] (II) RADEON(0): Monitor name: SL3220W
[ 9.463] (II) RADEON(0): EDID (in hex):
[ 9.463] (II) RADEON(0): 00ffffffffffff001ab3c70701000000
[ 9.463] (II) RADEON(0): 35130103682f1e822ad425a455499b27
[ 9.463] (II) RADEON(0): 135054a54b00950f81808140714f9500
[ 9.463] (II) RADEON(0): b30081c0010121399030621a274068b0
[ 9.463] (II) RADEON(0): 3600da281100001c000000ff00595631
[ 9.463] (II) RADEON(0): 553035353430310a2020000000fd0038
[ 9.463] (II) RADEON(0): 4b1e530f000a202020202020000000fc
[ 9.463] (II) RADEON(0): 00534c33323230570a20202020200014
[ 9.463] (II) RADEON(0): EDID vendor "FUS", prod id 1991
[ 9.559] (II) RADEON(0): Using EDID range info for horizontal sync
[ 9.559] (II) RADEON(0): Using EDID range info for vertical refresh
[ 9.559] (II) RADEON(0): Printing DDC gathered Modelines:
[ 9.559] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 9.560] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.560] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.560] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.560] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.560] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 9.560] (II) RADEON(0): Printing probed modes for output VGA-0
[ 9.560] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 9.560] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 9.560] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 9.560] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.560] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.560] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.560] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.560] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.560] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.593] (II) RADEON(0): EDID for output S-video
[ 9.651] (II) RADEON(0): EDID for output DVI-0
[ 9.651] (II) RADEON(0): Manufacturer: NEC Model: 6692 Serial#: 16843009
[ 9.651] (II) RADEON(0): Year: 2006 Week: 16
[ 9.651] (II) RADEON(0): EDID Version: 1.3
[ 9.651] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 9.651] (II) RADEON(0): Sync: Separate Composite SyncOnGreen
[ 9.651] (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 9.651] (II) RADEON(0): Gamma: 2.20
[ 9.651] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 9.651] (II) RADEON(0): First detailed timing is preferred mode
[ 9.651] (II) RADEON(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 9.651] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 9.651] (II) RADEON(0): Supported established timings:
[ 9.651] (II) RADEON(0): 720x400@70Hz
[ 9.651] (II) RADEON(0): 640x480@60Hz
[ 9.651] (II) RADEON(0): 640x480@67Hz
[ 9.651] (II) RADEON(0): 640x480@72Hz
[ 9.651] (II) RADEON(0): 640x480@75Hz
[ 9.651] (II) RADEON(0): 800x600@56Hz
[ 9.651] (II) RADEON(0): 800x600@60Hz
[ 9.651] (II) RADEON(0): 800x600@72Hz
[ 9.651] (II) RADEON(0): 800x600@75Hz
[ 9.651] (II) RADEON(0): 832x624@75Hz
[ 9.651] (II) RADEON(0): 1024x768@60Hz
[ 9.651] (II) RADEON(0): 1024x768@70Hz
[ 9.651] (II) RADEON(0): 1024x768@75Hz
[ 9.651] (II) RADEON(0): 1280x1024@75Hz
[ 9.651] (II) RADEON(0): 1152x864@75Hz
[ 9.651] (II) RADEON(0): Manufacturer's mask: 0
[ 9.651] (II) RADEON(0): Supported standard timings:
[ 9.651] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 9.651] (II) RADEON(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 9.651] (II) RADEON(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 9.651] (II) RADEON(0): Supported detailed timing:
[ 9.651] (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 9.651] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 9.651] (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 9.651] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 145 MHz
[ 9.651] (II) RADEON(0): Monitor name: 90GX2
[ 9.651] (II) RADEON(0): Serial No: 64117793GB
[ 9.652] (II) RADEON(0): EDID (in hex):
[ 9.652] (II) RADEON(0): 00ffffffffffff0038a3926601010101
[ 9.652] (II) RADEON(0): 101001030e261e78eade95a3544c9926
[ 9.652] (II) RADEON(0): 0f5054bfef80714f8140818001010101
[ 9.652] (II) RADEON(0): 010101010101302a009851002a403070
[ 9.652] (II) RADEON(0): 1300782d1100001e000000fd00384b1f
[ 9.652] (II) RADEON(0): 510e000a202020202020000000fc0039
[ 9.652] (II) RADEON(0): 304758320a20202020202020000000ff
[ 9.652] (II) RADEON(0): 00363431313737393347420a202000e1
[ 9.652] (II) RADEON(0): Printing probed modes for output DVI-0
[ 9.652] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 9.652] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 9.652] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 9.652] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 9.652] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 9.652] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 9.652] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 9.652] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 9.652] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 9.652] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 9.652] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 9.652] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 9.652] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 9.652] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 9.652] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 9.652] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 9.652] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 9.652] (II) RADEON(0): Output VGA-0 connected
[ 9.652] (II) RADEON(0): Output S-video disconnected
[ 9.652] (II) RADEON(0): Output DVI-0 connected
[ 9.652] (II) RADEON(0): Using exact sizes for initial modes
[ 9.652] (II) RADEON(0): Output VGA-0 using initial mode 1280x1024
[ 9.652] (II) RADEON(0): Output DVI-0 using initial mode 1280x1024
[ 9.652] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 9.652] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:f8d4000
[ 9.652] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 9.652] (**) RADEON(0): Display dimensions: (470, 300) mm
[ 9.652] (**) RADEON(0): DPI set to (69, 86)
[ 9.652] (II) Loading sub module "fb"
[ 9.652] (II) LoadModule: "fb"
[ 9.652] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 9.678] (II) Module fb: vendor="X.Org Foundation"
[ 9.678] compiled for 1.12.1, module version = 1.0.0
[ 9.678] ABI class: X.Org ANSI C Emulation, version 0.4
[ 9.678] (II) Loading sub module "ramdac"
[ 9.678] (II) LoadModule: "ramdac"
[ 9.678] (II) Module "ramdac" already built-in
[ 9.678] (--) Depth 24 pixmap format is 32 bpp
[ 9.687] (II) RADEON(0): [DRI2] Setup complete
[ 9.687] (II) RADEON(0): [DRI2] DRI driver: r300
[ 9.687] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 9.687] (II) RADEON(0): Front buffer size: 5120K
[ 9.688] (II) RADEON(0): VRAM usage limit set to 224712K
[ 9.738] (==) RADEON(0): Backing store disabled
[ 9.738] (II) RADEON(0): Direct rendering enabled
[ 9.770] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 9.770] (II) RADEON(0): Setting EXA maxPitchBytes
[ 9.770] (II) EXA(0): Driver allocated offscreen pixmaps
[ 9.770] (II) EXA(0): Driver registered support for the following operations:
[ 9.770] (II) Solid
[ 9.770] (II) Copy
[ 9.770] (II) Composite (RENDER acceleration)
[ 9.770] (II) UploadToScreen
[ 9.770] (II) DownloadFromScreen
[ 9.783] (II) RADEON(0): Acceleration enabled
[ 9.783] (==) RADEON(0): DPMS enabled
[ 9.783] (==) RADEON(0): Silken mouse enabled
[ 9.789] (II) RADEON(0): Set up textured video
[ 9.789] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 9.789] (II) RADEON(0): [XvMC] Extension initialized.
[ 9.789] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 9.795] (--) RandR disabled
[ 9.795] (II) Initializing built-in extension Generic Event Extension
[ 9.795] (II) Initializing built-in extension SHAPE
[ 9.795] (II) Initializing built-in extension MIT-SHM
[ 9.795] (II) Initializing built-in extension XInputExtension
[ 9.795] (II) Initializing built-in extension XTEST
[ 9.795] (II) Initializing built-in extension BIG-REQUESTS
[ 9.795] (II) Initializing built-in extension SYNC
[ 9.795] (II) Initializing built-in extension XKEYBOARD
[ 9.795] (II) Initializing built-in extension XC-MISC
[ 9.795] (II) Initializing built-in extension SECURITY
[ 9.795] (II) Initializing built-in extension XINERAMA
[ 9.795] (II) Initializing built-in extension XFIXES
[ 9.795] (II) Initializing built-in extension RENDER
[ 9.795] (II) Initializing built-in extension RANDR
[ 9.795] (II) Initializing built-in extension COMPOSITE
[ 9.795] (II) Initializing built-in extension DAMAGE
[ 10.154] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 10.154] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 10.154] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 10.154] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 10.154] (II) AIGLX: Loaded and initialized r300
[ 10.154] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 10.195] (II) RADEON(0): Setting screen physical size to 338 x 270
[ 10.437] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 10.437] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.437] (II) LoadModule: "evdev"
[ 10.437] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.453] (II) Module evdev: vendor="X.Org Foundation"
[ 10.453] compiled for 1.12.0, module version = 2.7.0
[ 10.453] Module class: X.Org XInput Driver
[ 10.453] ABI class: X.Org XInput driver, version 16.0
[ 10.453] (II) Using input driver 'evdev' for 'Power Button'
[ 10.453] (**) Power Button: always reports core events
[ 10.453] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 10.453] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.453] (--) evdev: Power Button: Found keys
[ 10.453] (II) evdev: Power Button: Configuring as keyboard
[ 10.453] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 10.453] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.453] (**) Option "xkb_rules" "evdev"
[ 10.453] (**) Option "xkb_model" "evdev"
[ 10.453] (**) Option "xkb_layout" "us"
[ 10.476] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 10.476] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.476] (II) Using input driver 'evdev' for 'Power Button'
[ 10.476] (**) Power Button: always reports core events
[ 10.476] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 10.476] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.476] (--) evdev: Power Button: Found keys
[ 10.476] (II) evdev: Power Button: Configuring as keyboard
[ 10.476] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 10.476] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10.476] (**) Option "xkb_rules" "evdev"
[ 10.476] (**) Option "xkb_model" "evdev"
[ 10.476] (**) Option "xkb_layout" "us"
[ 10.477] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event3)
[ 10.477] (II) No input driver specified, ignoring this device.
[ 10.477] (II) This device may have been added with another device file.
[ 10.477] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event4)
[ 10.477] (II) No input driver specified, ignoring this device.
[ 10.477] (II) This device may have been added with another device file.
[ 10.477] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 10.477] (II) No input driver specified, ignoring this device.
[ 10.477] (II) This device may have been added with another device file.
[ 10.478] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event6)
[ 10.478] (II) No input driver specified, ignoring this device.
[ 10.478] (II) This device may have been added with another device file.
[ 10.478] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event7)
[ 10.478] (II) No input driver specified, ignoring this device.
[ 10.478] (II) This device may have been added with another device file.
[ 10.478] (II) config/udev: Adding input device zc3xx (/dev/input/event10)
[ 10.478] (**) zc3xx: Applying InputClass "evdev keyboard catchall"
[ 10.478] (II) Using input driver 'evdev' for 'zc3xx'
[ 10.478] (**) zc3xx: always reports core events
[ 10.478] (**) evdev: zc3xx: Device: "/dev/input/event10"
[ 10.478] (--) evdev: zc3xx: Vendor 0x41e Product 0x403a
[ 10.478] (--) evdev: zc3xx: Found keys
[ 10.478] (II) evdev: zc3xx: Configuring as keyboard
[ 10.478] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/input/input10/event10"
[ 10.478] (II) XINPUT: Adding extended input device "zc3xx" (type: KEYBOARD, id 8)
[ 10.478] (**) Option "xkb_rules" "evdev"
[ 10.478] (**) Option "xkb_model" "evdev"
[ 10.478] (**) Option "xkb_layout" "us"
[ 10.479] (II) config/udev: Adding input device LITEON Technology USB Multimedia Keyboard (/dev/input/event8)
[ 10.479] (**) LITEON Technology USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.479] (II) Using input driver 'evdev' for 'LITEON Technology USB Multimedia Keyboard'
[ 10.479] (**) LITEON Technology USB Multimedia Keyboard: always reports core events
[ 10.479] (**) evdev: LITEON Technology USB Multimedia Keyboard: Device: "/dev/input/event8"
[ 10.479] (--) evdev: LITEON Technology USB Multimedia Keyboard: Vendor 0x46d Product 0xc312
[ 10.479] (--) evdev: LITEON Technology USB Multimedia Keyboard: Found keys
[ 10.479] (II) evdev: LITEON Technology USB Multimedia Keyboard: Configuring as keyboard
[ 10.479] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input8/event8"
[ 10.479] (II) XINPUT: Adding extended input device "LITEON Technology USB Multimedia Keyboard" (type: KEYBOARD, id 9)
[ 10.479] (**) Option "xkb_rules" "evdev"
[ 10.479] (**) Option "xkb_model" "evdev"
[ 10.479] (**) Option "xkb_layout" "us"
[ 10.479] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event9)
[ 10.479] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 10.479] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
[ 10.479] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 10.479] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event9"
[ 10.479] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
[ 10.479] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[ 10.479] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
[ 10.479] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
[ 10.479] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
[ 10.479] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
[ 10.479] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
[ 10.479] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 10.479] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.479] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 10.479] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 10)
[ 10.479] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
[ 10.480] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[ 10.480] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[ 10.480] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 10.480] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 10.480] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 10.480] (II) No input driver specified, ignoring this device.
[ 10.480] (II) This device may have been added with another device file.
[ 10.480] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 10.480] (II) No input driver specified, ignoring this device.
[ 10.480] (II) This device may have been added with another device file.
[ 26.618] (II) RADEON(0): EDID vendor "NEC", prod id 26258
[ 26.618] (II) RADEON(0): Using hsync ranges from config file
[ 26.618] (II) RADEON(0): Using vrefresh ranges from config file
[ 26.618] (II) RADEON(0): Printing DDC gathered Modelines:
[ 26.618] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 26.618] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.618] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 26.618] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 26.618] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 26.618] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 26.618] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.618] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 26.618] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 26.618] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 26.618] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 26.618] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.618] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 26.618] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 26.618] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 26.618] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 26.618] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 26.622] (II) RADEON(0): Allocate new frame buffer 2960x1056 stride 3008
[ 26.631] (II) RADEON(0): VRAM usage limit set to 218152K
[ 36.615] (II) RADEON(0): EDID vendor "NEC", prod id 26258
[ 36.615] (II) RADEON(0): Using hsync ranges from config file
[ 36.615] (II) RADEON(0): Using vrefresh ranges from config file
[ 36.615] (II) RADEON(0): Printing DDC gathered Modelines:
[ 36.615] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 36.615] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 36.615] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 36.615] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 36.615] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 36.615] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 36.615] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 36.615] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 36.615] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 36.615] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 36.615] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 36.615] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 36.615] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 36.615] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 36.615] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 36.615] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 36.615] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16635.501]
[ 16635.517] Backtrace:
[ 16635.517] 0: /usr/bin/X (xorg_backtrace+0x36) [0x55d276]
[ 16635.517] 1: /usr/bin/X (0x400000+0x160ca9) [0x560ca9]
[ 16635.517] 2: /lib/libpthread.so.0 (0x7fd85ca81000+0xf140) [0x7fd85ca90140]
[ 16635.517] 3: /lib/libc.so.6 (0x7fd85b915000+0x125731) [0x7fd85ba3a731]
[ 16635.517] 4: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x7fd859878000+0xa5e51) [0x7fd85991de51]
[ 16635.517] 5: /usr/lib/xorg/modules/libexa.so (0x7fd859458000+0x9346) [0x7fd859461346]
[ 16635.517] 6: /usr/bin/X (0x400000+0xf3aa2) [0x4f3aa2]
[ 16635.517] 7: /usr/bin/X (0x400000+0x30bd3) [0x430bd3]
[ 16635.517] 8: /usr/bin/X (0x400000+0x33f52) [0x433f52]
[ 16635.517] 9: /usr/bin/X (0x400000+0x23165) [0x423165]
[ 16635.517] 10: /lib/libc.so.6 (__libc_start_main+0xf5) [0x7fd85b936455]
[ 16635.517] 11: /usr/bin/X (0x400000+0x2343d) [0x42343d]
[ 16635.517]
[ 16635.517] Bus error at address 0x7fd8504bf010
[ 16635.517]
Fatal server error:
[ 16635.517] Caught signal 7 (Bus error). Server aborting
[ 16635.517]
[ 16635.517]
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 16635.517] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 16635.517]
[ 16635.542] (II) evdev: Power Button: Close
[ 16635.542] (II) UnloadModule: "evdev"
[ 16635.555] (II) evdev: Power Button: Close
[ 16635.555] (II) UnloadModule: "evdev"
[ 16635.569] (II) evdev: zc3xx: Close
[ 16635.569] (II) UnloadModule: "evdev"
[ 16635.582] (II) evdev: LITEON Technology USB Multimedia Keyboard: Close
[ 16635.582] (II) UnloadModule: "evdev"
[ 16635.597] (II) evdev: ImPS/2 Logitech Wheel Mouse: Close
[ 16635.597] (II) UnloadModule: "evdev"
[ 16635.597] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 16635.650] Server terminated with error (1). Closing log file.
This happened when I tried to open a large image file in Firefox.
This is frustrating ...
Last edited by gigitek (2012-05-18 11:28:31) -
How to upload a HTML page with Flash image viewer?
I´ve got a html page with a flash image viewer file inn it. Preview in a browser is ok, but I don´t get it right on the server. Is it something spesial with the swf file?
This is what i have done: I just upload html -page, viewer swf file and the pictures to the same folder. Is this wrong?
Sorry, I really don´t have a clue... Thanks!Sorry to say, but that is not a webpage -
There is no doctype, no head section, no body section .
etc. etc.
Nothing would work in that document.
Please generate a properly formed HTML page, and place the scripts and script calls in the proper section and the rest in the body, and let's see what you get -
Rendering a JSF page with a choice from CoreSelectOneChoice!
Hi,
I have a jsp page with lots of ADF and JSF components. I have a CoreTable component that gets it values from a DB thru Toplink. On this page I have a CoreSelectOneChoice component with a ValueChangedListener. When the user makes a selection from the CoreSelectOneChoice component I want the CoreTable to update its value based on code in the ValueChangeListener.
My problem is that when the user makes its selection on the CoreSelectOneChoice component my CoreTable dont renders out from the new values I set in the ValueChangedListener.
So how can I render (re-post) my CoreTable component or my whole page after the code in my ValueChangedListener has run? Or what code should I put in the ValueChangedListener to get the wanted behavior.
Hope that sombody can help a stuck developer :-)
EskildHi,
set autosubmit = true on the core selet one component and define an ID value. On the table component, set the PatrialTriggers property to the ID value
Frank -
Hello, I am writing as I am experiencing some issues with my favorite web browser after updating to Windows 8.1. Here are some details. I updated from Windows 8.0 to Windows 8.1 and ever since Firefox has run somewhat strangely. In particular when on sites with a lot of images like Facebook. It is like there is some kind of Flikr effect between the desktop and the images and between the images and the browser (almost like old 16 bit video games flikering). It is not too bad but it is an issue. I have tried resetting firefox and restarting the computer. I haven't tried a repair, and I haven't done an uninstall yet.
thank you for helping, the issue seems to have been caused by the hardware accelerator
Maybe you are looking for
-
Exported JPEGs Distorted in Shadow Areas
I own a Nikon D7000 and I shoot 14bit RAW. In Lightroom 3.3 the preview images were distorted, only in development mode the images were fine. I reported to Adobe on this and they seem to have fixed this issue. In Lightroom 3.3 -- and still in 3.4 --
-
How can I play videos on my Mac using my iPad?
I have videos on my Mac mini that I want to watch on my iPad. All devices are on the same network.
-
Mail may open but show no message viewer window Mac OS X v10.9.5
Mail may open but show no message viewer window
-
Please Help! Process: iBooks [794] Path: /Applications/iBooks.app/Contents/MacOS/iBooks Identifier: com.apple.iBooksX Version: 1.0.1 (281) Build Info: iBooks-281000000000000~1 Code Type: X86-64 (Native) Pare
-
MBST - Update Delivery completion indicator
Hi, In tcode MBST. I want to select Delivery completion indicator check box and save it . There is any BAPI for it. I tried BAPI_GOODSMVT_CANCEL is not working for this requirement. I also tried MB_CHANGE_DOCUMENT, its not working. I wrote BDC / call