Pages won't allow me to create a table with just one row.

I'm trying to create a one row, two colum table in Pages. I have no problem with the columns. But I cannot create the table with just one row. Two rows apppears to be the minimum. Any ideas??

In Pages 5.2, click the equal sign at bottom-left of table and reduce the row count to one.

Similar Messages

  • How to create a table with just its structure in Access 2013?

    I have a front-end and back-end Access 2013 database. I want to send it to an MS Access development company. I cannot send it with any data because it has our members social security numbers and other personal identification data. In MS Access 2003
    I could save a table with just its structure.
    How do I save a table with just its structure? I want to learn how to do this.
    Thanks for the help.
    Robert

    On the Create tab of the ribbon, click Table Design.
    This opens the table design window, in which you can define fields and indexes without entering any data. Don't forget to save the design when you're done.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • RH10 won't allow me to create new topics with TFS

    Hi Everyone,
    Has anyone had a problem with TFS and RH10 where RH will not allow you to create a new topic?

    Haven't seen that before. Do you get an error or something?
    Do you know whether this is an issue stemming from TFS or could something in the RH project be broken? For example, if you make a copy of the project and unlink it from TFS, can you then add topics?
    Is is possible to import a topic into the project?

  • How do I create a track with just controller MIDI data in it?

    How can I create a track with just MIDI controller data in it? 
    For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
    I can then use this setup as a template for future projects.
    How can I do this?
    It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it. 
    Ideas?
    Thanks
    -Mike

    Soniq2 wrote:
    How can I create a track with just MIDI controller data in it? 
    For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
    I can then use this setup as a template for future projects.
    How can I do this?
    Let me qualify, I'm using Logic 9, not upgrading for various reasons.
    Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school)  Here's an example of an external instrument setup in the Environment.
    A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names).  This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan.

  • Help! My iweb app has just completely stopped working. It won't allow me to create a new site or open a previously built site. Please help, my deadline is fast approaching.

    Help! My iweb app has just completely stopped working. It won't allow me to create a new site or open a previously built site. What should I do? Please help, my deadline is fast approaching.

    What system and iWeb versions are you running? What happens when you double click on the iWeb application when trying to launch it?
    OT

  • Pages won't allow me to save document, can't gain permission to documetns

    Pages won't allow me to save documents, as it claims I don't have permission to access Documents or any other folder I try save anything in. I have gone to file info, made sure documents and all other folders are unlocked, and on the file I have permissions to read and write. Yet despite this, Pages keeps insisting I don't have permission. What can I do?

    I have also tried the Disk utility repair function but that did nothing.

  • How do I create a pdf from just one or two pages of an existing pdf?

    I just purchased this product (acrobat online)
    and it is not allowing me to do the things it promised, e.g. saving portions of one pdf to another, combining pages or entire docuements to create, even typing into a document (editing)! I am so frustrated - can someone please help!?

    But I jut paid $89.00 for the adobe pack - if I subscribe to Acrobat Plus, will that be credited?
    Date: Thu, 19 Sep 2013 15:50:14 -0700
    From: [email protected]
    To: [email protected]
    Subject: Files.Acrobat.com How do I create a pdf from just one or two pages of an existing pdf?
        Re: How do I create a pdf from just one or two pages of an existing pdf?
        created by H.Spector in Files.Acrobat.com - View the full discussion
    Hi,
    Thank you for your subscription.  If you are Acrobat Plus subscriber then you can extract the pages from the PDF file using Tools> Pages> Extract pages.
    You can find "Tools" at right top once you open your PDF file in Acroat.
    If you are subscriber to PDF Pack then please download Acrobat XI Plus from www.adobe.com.
    PDF Pack service offers "Convert to PDF", "Export from PDF"(to Word/PowerPoint/Excel/RTF formats so that you can edit the exported files) and "Combine Files" (combine your files into a single PDF file).
    Please let me know if you have any quesitons.
    thank you.
    hisami
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5697921#5697921
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5697921#5697921
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5697921#5697921. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Files.Acrobat.com by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph?

    In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph. 
    I need to make a table of contents for my Mater's Thesis and want to use the automatic table of contents feature.  I want the first sentence of a paragraph to have a different paragraph setting than the rest of the paragraph.  Is this possible?
    Thanks!

    Nice of you to be doing this for your Mother's Thesis.
    There are several issues here:
    1. A Paragraph Style is what it says, the style for the paragraph
    2. You can format text within a paragraph by applying a Character Style
    3. Pages 5.5.1 lets you apply formatting to overall text for the T.O.C. but not parts of it and you can not retain that formatting as a Paragraph style
    So in answer to your question, no.
    You will need to create the T.O.C. manually and unfortunately as Pages 5.5.1 can't create bookmarks (just one of over 100 missing features) you will be unable to link the T.O.C. to the referred pages in the list.
    Peter
    Apple's marketing slogan:
    Pages 5.5.1 - Can't Do That!

  • Rogers is saying that IOS4 won't allow use of the personal hotspot with a plan of less than 1GB data.  I say it's a policy of theirs, not an iOS restriction.  Anyone know the truth?

    Rogers is saying that IOS4 won't allow use of the personal hotspot with a plan of less than 1GB data.  I say it's a policy of theirs, not an iOS restriction. Anyone know the truth?
    I call BS but the tech guy was insistent that the iPhone can detect what plan I have and won't enable the feature and there's nothing they can do about it, short of selling me a larger data plan...

    robfromkelowna wrote:
    Actually it does.  It's wrong to lie to a customer.  By blaming Apple, they shift the blame and make it seem like there is nothing they can do about it.  If they admitted it was their policy, I could complain and try to get it changed or I could move to another carrier.
    If a person killed someone and blamed it on a heart attack, the person is stil dead, does it matter? Either way they're dead, right...  (extreme, I know, but illustrating a point)
    Wow.
    It is certainly Rogers policy and is not unusual at all among carriers.
    Seems like a non-issue to me, but apparently being "lied to" ( perhaps the employee was simply mistaken, it happens) is a major deal to you.

  • How to create a table with editable column values.

    Hi everyone,
    I think this is very simple but i'm not able to find how to do this. This is my requirement. I need to create a table with n columns and 1 row initially. user should be able to enter data into this table and click of a button should insert data into the data base table. Also there should be a button at the bottom of the table to add 1 row to the table.
    I know how to do the insert to database, but can anyone please let me know how to create a table that allows user to enter data and how to create a add 1 row button?
    Thanks in Advance!

    Raghu,
    Go through the ToolBox tutorial Create Page & Advanced table section of OAF Guide.
    Step 1 - You require to create EO & a VO based on this EO. This EO will be of DataBase table where you want to insert the data.
    Step 2 - Create a Advanced table region. (Refer this Adavanced table section for more on this)
    Step 3 - Attach this VO in the BC4J component of Adavanced Table region.
    Regards,
    Gyan

  • Can I create a table with more than 40 columns ?

    Hello,
    I need to organize my work with a table and need about 66 columns. I am not very good with Numbers but I know a little bit of Pages. I cannot find a way to create a table with more than 40 columns... Is it hopeless ? (Pages '08 v. 3.0.3)
    Thank you all

    It's never too late to try to teach users that the Search feature is not only for helpers.
    The number of columns allowed in Numbers is not a relevant value when the question is about Pages '08 tables.
    I tried to copy a 256 columns Numbers table into a Pages '09 document.
    I didn't got a table but values separated by TABs.
    I tried to convert this text range in a table and got this clear message :
    If I remember well, in Pages '08, the limit is 40 columns.
    It seems that you are a specialist of inaccurate responses, but I'm not a moderator so I'm not allowed to urtge you to double check what you wrote before posting.
    Yvan KOENIG (VALLAURIS, France) vendredi 29 avril 2011 14:57:58
    Please :
    Search for questions similar to your own before submitting them to the community

  • How to create a table with more tan 20 columns

    I created a A4 landscape document to make a calendar for the next year.
    To add the date information I need to insert a table with 32 columns (name of month + 31 days). It should be possible to create a table with a over all width of 29.7 cm (consisting of 1 column of 4.9 cm and 31 columns with 0.8 cm)?
    Remark: Yet reduced all indention's (? German: Einzug) and other spacers and the size of used font of the table.

    Hello Till,
    unfortunatly Pages connot create a table with more than 20 columns. This is no question of size or place.
    But you can create two tables, set the most right border of the fist table to "no line" and align the second table (with the other 12 columns) at the right side of the first table. Now you have "one" table with 32 columns.
    I have done this with my driving book (Fahrtenbuch, um es korrekt zu schreiben and it works fine.
    Frank.

  • How to create a table with auto number?

    I want to create a table with a column default to increasing integer. The first thought came up to me is to use sequence. I find in google the following create statement create table etl_stats1 (run_time date,arr_rows int,lid int default nextval('etl_req'));get ORA-04044: procedure, function, package, or type is not allowed here.
    There are threads metioned using trigger to do the job. But does what not support default to a sequence, it appears such a nature way.

    You need to create a sequence and a trigger:
    SQL> create table etl_stats1 (run_time date,arr_rows int,lid int)
      2  /
    Table created.
    SQL> create sequence etl_seq;
    Sequence created.
    SQL> create or replace
      2    trigger etl_stats1_bir
      3    before insert
      4    on etl_stats1
      5    for each row
      6    begin
      7        select etl_seq.nextval into :new.lid from dual;
      8  end;
      9  /
    Trigger created.
    SQL> insert into etl_stats1 (run_time,arr_rows) values(sysdate,99)
      2  /
    1 row created.
    SQL> select * from etl_stats1
      2  /
    RUN_TIME   ARR_ROWS        LID
    15:38:41         99          1
    SQL> SY.

  • How to create a table with multiple select on???

    Hi all,
            I am  new to webdynpro and my requirement is to create a  table with multiple selection on.I have to add abt 10 rows in the table but only 5 rows should be visible and moreover a verticalscroll should be available to view other rows.Can anybody explain me in detail how to do that.Please reply as if you are explaining  to a newcomer.Reply ASAP as i have to do it today.
                                                                           Thanxs

    Hi,
    1. Create a value node in your context name Table and set its cardinality to 0:n
    2. Create 2 value attributes within the Table node name value1 and value2
    3. Goto Outline view> Right click on TransparentUIContainer>Apply Template> Select Table>mark the node Table and it's attributes.
    you have created a table and binded its value to context
    Table UI properties
    4.Set Selection Mode to Multi
    5.Set Visible Row Count to 5
    6.ScrollableColCount to 5
    In your implemetaion, you can add values to table as follow:
    IPrivate<viewname>.ITableElement ele = wdContext.nodeTable().createTableElement();
    ele.setValue1(<value>);
    ele.setValue2(<value>);
    wdContext.nodeTable().addElement(ele);
    The above code will allow you to add elements to your table node.
    Regards,
    Murtuza

  • How to create a table with table maintanence

    Hi Friends,
    I want to create a table with the following fields.
    1. MANDT
    2. BUDAT
    3. WAERS
    4. KURSF
    And i need to maintain the table (User will maintain the table... like they'll add items to it)
    What are all the steps i should follow ???
    Thanks in advance.
    Cheers
    R.Kripa.

    I have solved the problem ..
    Sailatha thanks anyway
    The problem i faced was;
    I created the table ...... with all the fields as keys ..
    When i executed TCODE SM30 (Maintain Table) it said ... "View/table can be only maintained with  resrictions " and hence then it dint allow  me to maintain ... ;-(
    So then i changed the "Maintanence"  status to "Display/Maintance" allowed.
    thats how my problem of maintaining the table solved!!!
    Thanks
    Cheers
    R.Kripa.

Maybe you are looking for

  • OTL -What happens to the rejected time card?

    Hi All, Can u pls clarify me this question on OTL? We have 2 buckets on time card. One is 1) On time bucket (Element) 2) Late hours bucket.(Element) We r using entry level approver where only the time entries with Late hours will be sent for apprval.

  • PC Suite 6.86.9.3 - Music Manager shuts down.

    I just bought the nokia n73 ME, and I downloaded the PC suite 6.86.9.3 from the net. However when I try to use the Music Manager to transfer music, after I select the songs and choose copy to the phone, my music manager shuts down. Please advise if t

  • ZEN 4 GB + SDHC APACER 16 GB (needed to be inserted when the ZEN is turned on)

    Hi there, after using the Cowon D2 i am quite shocked with the ZEN player, but have to solve some issues.... Some cannot be solves, like the copying via internal and external memory, "expension" of SD without player funcionality, some other bugs The?

  • Recalling Previous commands

    Respected brothers.......... I am working on Linux base Oracle, i have heard that there is a way of recalling previous command in SQL prompt, but i do not know can you tell me. Also as we can edit commands with ed in windows, can we have this type of

  • SLM2048 Scripting Possibilities ?

    Hi everyone, i do have 3 SLM2048 Switches installed and configured as a single Stack. The switches are running fine. My problem is, that the Web interface is quite slow and also in some cases not that flexible ( if i want to configure VLANs i have to