Pages won't open any more.

It's Pages version 1.7.2 on a 1st generation iPad, and it used to work fine. When I tap the Pages icon, the app crashes right after the background pops up along with the word "Pages" at the top. I was going to uninstall and reinstall, but I get a warning that uninstalling the app will delete all of its data. My data is not on the cloud. There is 48GB of memory left, but the diagnostics feature records a low memery error when I try to open Pages. Any suggestions?

Before the uninstall/reinstall, try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.
If you do have to resort to the uninstall, activate iCloud first and make sure your files are loaded to it.

Similar Messages

Ipad pages won't open any documents, it lets me create one but won't open it

Basically the title says it all
Ipad pages won't open any documents, it lets me create one but won't open it
I have updated it last night, but the same problem was happening yesterday afternoon
iPad 2 - I bought it March 2012

Check the following settings:
1. Settings>Pages>Use iCloud>On
2. Settings>iCloud>Documents and Data>On

Safari won't open. Message appears: "Safari won't open any more."

Safari won't open. Message appears: "Safari won't open any more." Computer is connected to the internet. Mozilla Firefox works perfectly.

This can happen if adware is installed without your knowledge.
1. Use free AdwareMedic to remove adware
    http://www.adwaremedic.com/index.php
   Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
   Once done, quit AdwareMedic.
             or
   Remove the adware manually by following the “HowTo” from Apple.
   http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
    Turn those off and relaunch Safari.
    Turn those on one by one and test.

Pages won't open ANY file, old or new

Pages '09 won't open previously saved documents (.pages or .doc), or open a new document from template. When attempting to open a previously saved document, I get the error message "The document "document-name.pages" couldn't be opened." Pages, as a program, however, stays open. When attempting to open a new document from a template, the progress indicator simply spins forever and does not open a document.
Keynote and Numbers work just fine, both being able to open old and new documents.
When opening an old document, Pages creates these Console messages:
5/25/09 7:10:01 PM Pages[211] Assertion failure: Method: markerOfType:forRulerView:atLocation:listLevelActive:
Object: <SFWPRulerMarker 0x2d10800>
File: /SourceCache/iWorkShared/iWorkShared-408/sfwordprocessing/SFWPRulerMarker.mm
Line #: 202
we should have had an image or an image resource name
5/25/09 7:10:01 PM Pages[211] Exception opening document: * -[SFWPRulerMarker initWithRulerView:markerLocation:image:imageOrigin:]: no image given. NSRulerMarkers must have an image.
5/25/09 7:10:01 PM Pages[211] Failed to open document, but no unrecoverable error
I have tried deleting user, system, and font caches, deleting iWork preference files, and reinstalling iWork, but none of this has worked.

Well I finally got it to work. I uninstalled and AppTrap grabbed a few preference files that belonged to Pages and I allowed it to delete them all. I rebooted and installed iWork again, but I got the same issue, again. I was attempting to select a blank document style from the Template Chooser, but it wouldn't open any, just spinning the wheel in the template preview in the Template Chooser window. I went into preferences and told it to create new files using the Blank template, and that worked. However, it wouldn't let me use the Template Chooser to open a new document.
I saved the new document, created from the Blank template in Template Chooser, to the desktop. I double-clicked on this document and it said it couldn't be opened? However, I could open it from inside Pages, just not by opening the document and having it use the default application (Pages) to open it with.
Lots of odd stuff going on here. I came to the idea that something residual was sitting on my HD, and decided to try a better cleaning. I opened Clean My Mac and dropped Pages on the Applications window. Clean My Mac did a scan and identified a ton of items pertaining to uninstalling Pages, nearly 900MB of misc documents, caches, and other stuff. At this point I wasn't too worried about deleting the wrong thing, as I am nearly ready to wipe and reinstall, whatever it takes to straighten it out.
After removing everything, I did a reboot just to be safe. Then in reinstalled iWork 09, and attempted to open documents using Template Chooser. SUCCESS! However, I remembered that it worked just fine until I applied the 9.0.2 update to iWork, so I was cautiously doubtful that I would be able to work this time once I applied the update. Well, it seems CleanMyMac pulled something off that was complicating things, possibly from the old iWork '08 version, or the Trial Version? I'm not really sure.
Anyhow, thanks for the help and suggestions. I've got a bunch of errors showing-up in the Console, and slowly, little-by-little, I'm working on trying to research and solve them all. I wish I could find a good source for referencing all of the errors that are showing-up, as this seems like it'll take a long time.
Thanks again!
Pete

Firefox won't open any more and won't reinstall

My Firefox browser suddenly won't open at all. I tried to reinstall but when I clicked the 'run' button, all information disappeared but nothing happened. I went to my 'downloads' to try again but the same thing happened. It will not reinstall. I have an HP Envy laptop with windows 8.

hello christine, since this can sometimes be caused by malware active on a system, please run a scan with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & [http://www.microsoft.com/security/scanner/default.aspx microsoft safety scanner].
[[Troubleshoot Firefox issues caused by malware]]

Pages won't open any documents?

I have 5 users. 2 Admin (Parents), 3 (Kids).
Pages has stopped working on my (Admin) login, but works fine on the other 4.
How can I fix this? Thanks

SuportID,
Based on what we know, your Pages issue is unique to your admin account on a five-user machine. Attempts to open new blank documents, other templates, or existing documents fail with Pages hung. We have cleaned local and system caches, rebuilt the font database, removed Pages preference(s), and found that Pages acts no differently in Safe Boot Mode as it does under normal boot.
When OS X installs new user accounts, it also sets Access Control Lists on home directories, and the folders within that have an icon on them such as Library, Music, Documents, etc. If these ACL get changed or corrupted, your account access may not work correctly. This can happen when restoring home directories from a backup that may have corrupted these ACL. There is a simple process to reset them to original state.
Reboot into recovery mode holding either of following keys
command+R
option key
Choose Recovery partition
From Utilities menu, run the terminal app
type the followingresetpassword
A panel appears
You will not be resetting any passwords
At the bottom is the option to reset ACL - choose this onlyResets ACL as originally established during account setup
Quit recovery and boot normally
Try Pages again - new or existing files in your home directory
If Pages is still ornery after the above steps, press shift+command+U (opens /Applications/Utilities) and select the Console application. In its left panel under FILES, select system.log. In the bottom panel, lower right, select Now. And in the search window where it says String Matching, type in Pages, using leading capital. Now launch Pages again and attempt to access a local file. See what messages appear regarding this Pages session.

Updated iTunes to the newest version and now iTunes won't open any more.

Yesterday, iTunes was working properly. Ran spy sweeper and PC has no viruses. Opened iTunes today and it asked if I wanted to update to the newest version. I did. Newest version never installed properly. Said a file was missing 2/3 through with installation. Tried to uninstall and reinstall completely and its telling this same file is missing. Any ideas? Using Windows 7. Trying to connect with my iPhone 5.

The error message I am receiving is:
iTunes.exe - System error.
The programs can't start because MSVCR80.dll is missing from your computer.
Try reinstalling the program to fix this problem.
(Which I have done.)
Next error message is:
iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)

Adobe Acrobat 8.0 won't open any more.

I have a registered version of Adobe Acrobat 8.0 Pro (with the Creative Suite) running on a computer with Windows 7. Until today it worked fine and since checking for updates it will no longer work - the program won't even open. The other programs all work fine. I also noticed that 8.0 is not eligible for an upgrade. How can I get Acrobat opening and running again? I've tried everything that I've seen on here including deactivating other programs and reactivating and running the repair.

Hi miss_patrish,
We do not recommend to use to Acrobat 8.0 on windows 7. I would suggest you should upgrade to latest version of Acrobat.
Have you tried to uninstall and reinstall the Acrobat 8.0?
Regards,
Ajlan Huda.

Attachments won't open any more

I used to be able to open email attachments on my 8800, but last week this suddenly stopped working. Mostly I'm trying to open XLS files sent from my gmail or yahoo accounts, but I don't think any attachments are working. Sometimes I get an 'incomplete input data' error, but most of the time it shows the 'viewing document' progress bar but then doesn't actually open it.
On the advice of a few other forums I've tried rebooting the BB, clearing the logs, deleting old emails, verifying that there's enough space on the device, and having the service books resent. No luck so far. Has anyone else run into this?

Hi and welcome to the forums!
Try this in the correct sequence:
Go to options, advanced options, Host Routing Tables, click to enter. DO NOT click on any listing.
Press menu key, and select register now.
You will get a verification email. Then go to email settings and send service books.
Some models like the Curve 8330 and Pearl require logging into the carriers BIS site
via PC. You will get an email per account for activation.
Do a battery pull as listed, then check the attachments.
Thanks,
Bifocals
No data will be lost when doing the following: pull the battery while the device is ON.
Replace after a minute, Let the device reboot 1-3 min, see if the problem is fixed.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

IDVD won't open any more?!

Hi there,
My mac has stopped opening iDVD. It opens and the dock icons jumps as per usual and I am presented with the splash screen. From there, if I open a project or create a new one, the program either freezes and I have to force quit it or it just closes all together without any warning. I can create a new Magic iDVD however, when I click on "Create Project", the same happens as above.
My mac has 2 hard drives in it, one of which I recently changed. Originally I had a 200GB HD however I have recently changed it to a 40GB HD. The 200GB drive had nothing on it at all and so I am fairly sure that hasn't had anything to do with iDVD not working. Since then however, I have filled up the 40GB drive and so I am wondering if it could be due to a lack of memory that iDVD isn't opening. (I could however be totally wrong as I don't know if iDVD would use the second drive at all.)
My question is could the lack of memory be responsible for the program not opening and if not, is there anything else I could try?
Thanks

Since then however, I have filled up the 40GB drive and so I am wondering if it could be due to a lack of memory that iDVD isn't opening.
You got it. iDvd needs working room on the boot volume (your main HD). I recommend 20-25 GB and above.
You could do what I have done in the past and take that 200 GB and use CCC or SuperDuper to clone the 40 GB to the 200 GB. Once you know it's fully operational and you can successfully boot to the newly created mac volume, then reformat and use the 40 GB as a scratch disc for iMovie or other apps like FCP, DVDSP, etc.
Hope this solves the issue but if not just come on back ....
Message was edited by: SDMacuser

I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and shuts down.

I've tried uninstall/reinstalling it, disabling bonjour and the icuuc40 swap out to the older version but nothing has worked, yesterday I upgraded to 10.2.2 and still nothing. I haven't been able to open itunes for about a month now without it crashing.

Ok perfect I did what you asked, there are 2 different ones that seem to be occurring but the most recent one is:
roblem signature
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.2.2.12
Application Timestamp:          4da738b4
Fault Module Name:          WebKit.dll
Fault Module Version:          5.33.21.1
Fault Module Timestamp:          4d87e897
Exception Code:          c000008e
Exception Offset:          00522669
OS Version:          6.0.6002.2.2.0.768.3
Locale ID:          4105
Additional Information 1:          fd00
Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
Additional Information 3:          fd00
Additional Information 4:          ea6f5fe8924aaa756324d57f87834160
the other on is:
Problem signature
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.2.2.12
Application Timestamp:          4da738b4
Fault Module Name:          JavaScriptCore.dll
Fault Module Version:          5.33.20.20
Fault Module Timestamp:          4d4d9843
Exception Code:          c000008e
Exception Offset:          0008b25a
OS Version:          6.0.6002.2.2.0.768.3
Locale ID:          4105
Additional Information 1:          5613
Additional Information 2:          e12041d64bc8903760edd87f9e2a0ba2
Additional Information 3:          ddc6
Additional Information 4:          73b34ca1bae9f308beb22e994982729c

CS3 Won't Open Any More

I have had CS3 on my computer for about 1 month now and I was using it just fine. I went to start the program and now it cycles through with the intro screen when the program is starting, then the top bar shows up at the top of the screen and then it shuts down unexpectedly. (It show up in the task bar and then disappears when it closes right away.)
I tried uninstalling/reinstalling. I tried running the 3.1.1 update patch and it still won't work. Please help! I have a time sensitive project I am working on.
Thanks!

Some troubleshooting tips.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 300 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Iphoto won't open any more after software update

Hi,
I just had an automatic software update on my computer (Macbookpro OSX 10.6.8), and when I attempt to open iphoto, the following message window opens...
Help!
Many thanks
Process:
iPhoto [431]
Path:
/Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:
com.apple.iPhoto
Version:
Build Info:
iPhotoProject-628000000000000~3
Code Type:
X86 (Native)
Parent Process: launchd [150]
Date/Time:
2012-03-19 16:20:27.492 +0800
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:
815 sec
Crashes Since Last Report:
4
Per-App Crashes Since Last Report:   4
Anonymous UUID:
6AE2F8B5-8B4A-4D61-B565-DE3D850BDDC0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifePageLayout.framework/Versions/A/iLifePageLayout
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500325ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 8
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 4
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3

and whoohoo for little me as i have solved the issue by downloading iphoto9.2.2Update.dmg
It fixed my issue!

My final cut pro 7 won't open any more

it jumps up and down on the bar at the bottom then a window pops up saying that it had to close unexpectedly. All the other features work(Compressor, dvd pro, cinema, soundtrack) and i would love to have the program back.

You should probably ask about this in the Final Cut Studio forum not in the Final Cut Pro X forum.

Pages cycles through documents and won't open any of them - what do I do?

Pages cycles through documents and won't open any of them - what do I do?

Thanks for replying -
my operating system is OS X Lion 10.7.5
Pages version 4.3
What I mean by 'cycles through documents" is that when I attempt to either open a document or just open the application - it looks like the application begins to start - I see the first page of a bunch of documents very quickly going from left to right on my screen but then I see a bar in the middle of the screen (I'm not sure what its called but its the one that tells you to wait while the computer does something) - and then it just stays there, never opening the documents.
My version of pages has always had the "cycling" effect at the beginning but it always ended quickly and I could begin working on my documents - now.... I can't begin working on anything and the only option I have is to force quit.
Thanks for any advice you can give me!

Pages won't open any more.

Similar Messages

Maybe you are looking for