Pages works real slow

Hello, I'm a Computer Science student and I write all my assignments in Pages, I use a lot MathType in my documents to enter equations.
Pages gets really really slow and lagging when typing and moving the cursor after filling about half of the page.
nearly the end of the page it becomes so slow that it i have to wait few seconds for each letter to show up .
when I finish with the current page and move to the next one, it works perfect, again, until about half of the page.
Is there a solution for this?

I met the exactly same problem. I also have to type many math equations in a file. I use mac book pro from 2012, with 16gm ram.
I almost can not edit my old files which contains lots of equations! too slow.
If I create a new file, it works ok only for the first few lines, it getting slower and slower along as the new equations added, which are generated by MathType.
I also turn off the auto check for spelling and grammar, it won't improve. I guess there's problem on the new formate for pictures inserted, since the pages read equations as pictures.
Getting very angry on this damning update!

Similar Messages

  • Pages works really slow.

    Pages works really slow. The document contains 28 pages. Can anybody help?

    Frisimo wrote:
    That explains a lot. Is there any work around? Or do I just need to increase the speed of my computer?
    The way that the iWork apps process Tables is very processor-intensive. There is no good reason that I am aware of so we must assume that there was little attention paid to the efficiency of the code. Tables with Headers and Footers and tables with expressions written in shorthand notation (specifying only row or column rather than full cell addresses) run slower than tables not using these features. Yes, a faster computer will help, but it's an expensive solution and you might still be unhappy with the speed after the upgrade so I wouldn't do it purely for the sake of this problem.
    If possible, divide your document into parts (files) that can be edited separately and only assemble the full document when all the parts are complete.
    Jerry

  • Pages on iPad2 is working extremely slow

    Hi, I updated my iPad to iOS 8.1 but since then my Pages is working extremely slow, first in updating the new docs from iCloud Drive, then in being able to work in them. It takes about ten minutes just to get into one document. Can anybody give me a good suggestion in to solving this problem?

    (Wow, really unethical, Apple took down my last post, so "rewording this more nicely" I guess)
    Agreed. I honestly cannot begin to justify how irresponsible Apple has been over this. I have lost a computer tha may have been damaged by Yosemite, and lost some data through iWork and the apps are totally unusable for the most part. Two classes that require a presentation which I teach were impacted. This is threatening peoples' livelyhoods.
    From what I have seen, this largely stems from problems with iCloud Drive. iWork apps crash CONSTANTLY and don't even function when there is an online connection, but turning off the functionality gives you a slight chance before he apps freeze, slow down, or become unusble again.
    In the meantime, it seems Apple users are just stuck waiting till the next update. I couldn't even type this response without two crashes from Safari.

  • Foxfire is running real slow and and any search I do it says problem loading page.

    when I get on internet it is real, real slow. but it does pull up aol.com my homepage. but then when i try to search even websites i visit regularly it says there is a problem loading the page.

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *http://kb.mozillazine.org/Error_loading_websites
    You can try to reset (power off/on) the router.

  • Help - Firefox is running real slow, loading pages, etc compared to i.e/safari

    hey guys appreciate the help.. firefox is running real slow lately.. like loading pages takes a good 2 minutes compared to i.e or safari loading in under 2 seconds
    i dont have many addons, just an extended status bar and thats pretty much it
    what can i do other then just reinstalling ??

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences'''<Enter> in the address bar
    Select '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • Printing from web pages is excruciatingly slow with most recent upgrades of Firefox .Use an iMac and an HP officejet printer. Printer works fine with Safari and woodprocessed files, but not with Firefox and web pages.

    Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.

    Hello and welcome to the Apple Discussions Forum.
    I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
    With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
    Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
    If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
    PaHu

  • MBP working very slow, rarely displays working wheel

    Hi guys,
    My MBP is working very slow.
    I have taken off AVG, and in my user account I've stopped Soundflower from launching automatically. This seemed to help for a few days, then it's back to dragging.
    I used Etre; but don't know the items mean...
    Thanks so much in Advance.
    EtreCheck version: 1.9.12 (48)
    Report generated 16 August 2014 9:28:32 am GMT+7
    Hardware Information:
      MacBook Pro (13-inch, Mid 2010) (Verified)
      MacBook Pro - model: MacBookPro7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
      4 GB RAM
    Video Information:
      NVIDIA GeForce 320M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software:
      OS X 10.9.4 (13E28) - Uptime: 16 days 1:7:35
    Disk Information:
      Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (76.15 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      HL-DT-ST DVDRW  GS23N 
    USB Information:
      Apple Internal Memory Card Reader
      Apple Inc. iPhone
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
    Configuration files:
      /etc/sysctl.conf - Exists
    Gatekeeper:
      Mac App Store and identified developers
    Kernel Extensions:
      [loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
      [not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
      [not loaded] com.sierrawireless.driver.SierraDevSupport (1.0.7) Support
      [not loaded] com.sierrawireless.driver.SierraFSRSupport (1.0.1) Support
      [not loaded] com.sierrawireless.driver.SierraHSRSupport (2.1.1) Support
      [not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.1) Support
    Problem System Launch Daemons:
      [failed] com.apple.AOSNotificationOSX.plist
      [failed] com.apple.wdhelper.plist
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.sierrawireless.SWoCTool.plist Support
      [not loaded] com.teamviewer.teamviewer_service.plist Support
    Launch Agents:
      [not loaded] com.teamviewer.teamviewer.plist Support
      [not loaded] com.teamviewer.teamviewer_desktop.plist Support
    User Launch Agents:
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.spotify.webhelper.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items:
      Dropbox
      Google Chrome
      Notes
      Messages
      Calendar
    Internet Plug-ins:
      Google Earth Web Plug-in: Version: 7.1 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      OfficeLiveBrowserPlugin: Version: 12.3.1 Support
      Silverlight: Version: 3.0.50106.0 Support
      FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
      Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
      AdobePDFViewer: Version: 9.5.5 Support
      EPPEX Plugin: Version: 3.0.5.0 Support
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
      Flash Player  Support
      Flip4Mac WMV  Support
    Time Machine:
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 297.29 GB Disk used: 226.37 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 
      Total number of backups: 77
      Oldest backup: 2011-12-22 20:28:21 +0000
      Last backup: 2014-08-11 11:05:24 +0000
      Size of backup disk: Excellent
      Backup size 2  > (Disk size 297.29 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          4% WindowServer
          2% Image Capture Extension
          1% softwareupdated
          1% systemstatsd
          1% diskimages-helper
    Top Processes by Memory:
      292 MB Image Capture Extension
      98 MB Finder
      90 MB iPhoto
      78 MB WindowServer
      54 MB com.apple.quicklook.satellite
    Virtual Memory Information:
      21 MB Free RAM
      824 MB Active RAM
      798 MB Inactive RAM
      635 MB Wired RAM
      74.58 GB Page-ins
      1.59 GB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path ".+s/Resources" -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press thereturn key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press returnthree times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • ICloud disaster destroyed all my Pages work on the iPad!

    I have an IPad 2 with Pages that I have used for months to write business articles and research papers for publication. I have been using iCloud to synch it through a single user account.
    Last week, I was forced to upgrade my iMac to Lion because corrupted account permissions locked me out of all my home folders as well as my two different external drives and even my Time Capsule and Time Machine --- something supposedly impossible. But it all inexplicably happened. It took over a week for assorted sympathetic Apple care specialists and engineers to try to sort it out. The original problem was still never diagnosed or solved. Instead, my hard drive was erased, OSX 10.6 reinstalled, a date back up restored, and then Lion loaded as new. 
    As per Apple care instruction, iCloud in Lion was immediately activated on the iMac -- but no document files were ever shared.
    Four days later, after synching my iPad to iCloud, when I next opened Pages I watched in horror as in a mere second more than 30 documents vanished en masse right before my eyes.
    Somehow all these files never got backed up in my iTunes even though I had made several recent saves to the hard drive as well as an iCloud back up!
    And as for the files or even the mobile documents library folder being save in my recent Time Machine back ups, they never were. The back ups contain no iOS Pages text nor any deleted folder files to restore. 
    Despite all the Time Machine and iTunes back ups, and despite all the free space on the iPad where I actually did all the work without an internet connection, as soon as I synched they were mysteriously deleted by iCloud. 
    Pages on iPad was left empty and blank. Replacing the mobile documents folder on my iMac from a back up did at least managed to provide Pages file some icons with names dates, but they are ghost documents, mere skeleton files that can’t be opened. All my actual text content is now apparently nowhere; lost in Apple’s iCloud ether!
    This is an iPad which for months I used for Pages work without any internet connection, 3G or WiFi, and yet in an instant the iCloud on its own disintegrated everything it contained!  Apple essentially reached down into my device, into my personal property that I own, and without warning, notice, or permission and simply erased all my work; all my personal labor and effort that belonged to me. They essentially committed sabotage and theft.
    I have nothing saved anywhere despite being told how the iCloud was a trustworthy safety net, that Time Machine provided worry free back up, and that saving through iTunes could restore iPad content. Garbage. I did everything right and still got screwed.
    Further…
    In just the past two weeks alone I have suffered: my second iPhone -- a month old replacement for a previous defective iPhone itself only a month old -- experience a “software corruption” that caused it to continuously shut down if unplugged; my iMac and Time Capsule failing; and now this catastrophic iPad disaster.
    If this is not resolved with my fiels returned to me I simply will never use iCloud and I will never trust Apple again.
    I am disgusted and furious beyond words.
    JC
    Atlanta

    Hi JC,
    My iPad is in a similar state, although I arrived in the bizarro state by a different path.  I am also waiting for the apple experts to get back with me.  I have an iPad 1 with ios 5.1.1 and Pages 1.7.1.
    In the mean time, while I was waiting, I found a way to extract the TEXT from a large Pages document I did not want to lose;  it was the result of many years of notes.  This might save you some time instead of sifting through the raw index.db. 
    The index.db file is a sqlite3 file.  If you are on mac you can open it from a terminal with the command:
    sqlite3 index.db.
    I suggest you move the file out of the iTunes directory before you start working with it, just in case something unexpected happens, you don't want to lose the only copy of the data you are trying to recover. 
    1) Once the file is open via 'sqlite3 index.db' from a terminal command line, type ".tables" at the 'sqlite>" prompt and press enter.  It should show five tables:
    cullingState
    dataStates
    document
    objects
    relationships
    2) The file with your data is named dataStates, but it has many records in it.  I found my data by looking for the "largest" record.  Let me explain.  There are two fields in the dataStates table:
    identifier
    state
    Your data is stored in the 'state' field and it's data type is 'blob'. (I know that sounds stupid, but stick with me.)
    3) I found the largest record by typing  this query at the 'sqlite>' prompt:
    select identifier, length(state) from dataStates order by length(state) asc;
    My 'dataStates' table had 599 records, so many lines fly by, but the largest state field is at the bottom of the list with it's identifier.  Mine was:
    3|173212
    That identified a dataStates record with identifier '3' and 173,212 bytes of data in the 'state' field. Most of the bytes where printable ascii.  It WAS the text of my original Pages document.
    DISCLAIMER:  This method does not retrieve ANY formatting, pagination, tables bullets or numbering, images or other document rendering information.  It is just the TEXT.
    4)  Type this SQL command at the 'sqlite>' prompt to pull out the blob data:
    select hex(state) from dataStates where identifier=X;
    In my case the identifier was 3 so MY command was:
    select hex(state) from dataStates where identifier=3;
    5) Now is when the funs begins.   The large block of gibberish is 'ascii encoded binary' brought to you courtesy of the hex function. 
    To store it in a file, use the the sqlite3 '.output' command and type the preceding sql select.  Like the following:
    .output binacii.txt
    select hex(state) from dataStates where identifier=3;
    .output stdout
    This takes the large block of 'binary encoded ascii' and writes it to file named 'binascii.txt' rather than displaying it in the terminal window.  After the select statement ends, the output is switched back to the terminal window (stdout).    The 'binascii.txt' file is located in the same folder/directory that was the current directory when you launched the sqlite3 command.
    6) I moved my 'binascii.txt' file to a windows computer at this point and wrote a simple conversion routine to decode the 'ascii coded binary' into something usable with a work processor.  In "ascii coded binary", each 8-bit byte of data is encoded as two ascii characters, it enables sending binary data via the internet, etc, similar to uuencode, but NOT the same.
    7) Here is a small python program to convert the 'binascii.txt' file to the text from your Pages document on a Mac:
    import sys
    p = sys.stdin.read()
    s = []
    for location in range(0, len(p), 2):
       value = int(p[location:location+2], 16)
       if value >=32 and value <=126 or value==10:
           s.append(chr(value))
    sys.stdout.write(''.join(s))
    8) (NOTE: The last line has two single quotes (') not a double quote (")). I am assuming at this point that you know how to create a text file using a terminal window.   Add the python script to a text file, make sure you honor the indentations!  I named my python file 'convert.py'.  To use the python script, type the following command:
    cat binascii.txt | python convert.py > your.txt
    This method also assumes that the files 'binascii.txt', 'convert.py' and 'your.txt' are all in the same folder/directory.
    9) The resulting file, 'your.txt' can be opened by Word or Pages (you can name the file 'your.txt' to whatever you want).  In my case, I opened the file 'your.txt' with MS Word.  It had some rudimentary formatting in the form of paragraph breaks, single lines, some headings etc.  I did lose the data stored in tables, although I expect the text is still lurking somewhere in the index.db file.
    There were some ascii characters that were not part of my original document, but they were pretty easy to find and remove.  In my case the errant ascii characters were outside my document's large text block.   Also numbered and bulleted blocks run together.  Again the formatting information is still buried within the index.db file.
    The iOS Pages file format is more cryptic than the simple zip/XML format from the desktop OS X version of Pages.  
    Hope this helps a little, although you seem to be OK with the approach of sifting through the raw index.db file.  The Pages document  I wanted to recover was 63 pages long and manually sifting through all the crap in the index.db  drove me on a quest to find the real text within the index.db file, which i found.
    Sorry for the length of this post,
    Cheers

  • Fire fox locks up and is real slow when using windows 7 64bit

    I am using windows 7, 64bit
    when you click on a "go to link" phrase/word the program either locks up or takes a real long time to to go to the link site.
    program loads real slow (it take 3 to 4 times longer than in windows xp.
    I am using fire fox 4.0.1, this problem is the same with earlier versions as well

    I have followed the troubleshooting solutions, reset, no add-ons etc.. even full uninstall & reinstall. Nothing has worked to resolve the issue.
    FF hangs with Not Responding is frequent, while this is hung, it locks up my entire PC and I cannot do anything including opening Task Manager.
    My Workstation Specs:
    OS: Microsoft Windows 8 Pro 64-bit
    CPU: AMD FX-8350 Vishera 32nm Technology
    RAM: 32.0GB Dual-Channel DDR3 @ 669MHz (9-9-9-24)
    MB: ASUSTeK COMPUTER INC. M5A99X EVO R2.0 (Socket 942)
    Graphics: 47LV4400 (1920x1080@60Hz) 2048MB GeForce GTX 660 (ASUStek Computer Inc)
    HDD: 224GB TOSHIBA MKNSSDCR240GB ATA Device (SSD)
    699GB Seagate ST750LX003-1AC154 ATA Device (SATA)
    BluRay: PIONEER BD-RW BDR-208D ATA Device
    Audio: Realtek High Definition Audio

  • UIX page run very slow on Jboss

    hi.. i am using Jdeveloper 10.1.2 to develop my application and my application containing JSP and UIX pages.At last i deploy it onto Jboss 3.2.7.
    It work properly, but i found that each time user access/open a page, which never open before, that page(either UIX or JSP page) show very slow. After that when user open it again, it show out as normal.
    Now, the problem is, when user close the browser, open it and access that page again, for JSP, it show out fast, but for UIX, it still take time to show out. I dont know what cause this happen. And i wondering that is that any way to configure ADF UIX in order to increase its performance?
    Please give me some suggestions and guides. Thanks in advance.

    Hi... is there anybody can help me? thanks..

  • Pages is incredibly slow.

    Pages is incredibly slow.  Everytime I click or type the pinwheel appears.  How can I fix this?  I have a document with some pictures on it, but I can't even move the image a few degrees without the pinwheel appearing.

    Was having the same problem yesterday. This worked for me
    In View menu, uncheck Page Thumbnails

  • Anyone notice that Firefox downloads and load a page a lot slower then Dolphin HD?

    Anyone notice that Firefox downloads and load a page a lot slower then Dolphin HD? That has been my experience all morning. I'm on Verizon Droid 2.
    I been testing various web pages using Dolphin & Firefox Mobile, and I have noticed that in general, web pages takes longer to download and slower to render in Firefox Mobile then in Dolphin HD. It is not a cache issue as I clear my cache between tries.
    Firefox Mobile 4 (downloaded 3/21/2011)?
    Dolphin HD 4.5.0

    I have the same problem on my website. It only happens in Firefox. IE, Chrome and Safari are working fine.
    Very strange behaviour. Check this page: http://1stlook.nl/webdesign-eindhoven.html
    You have to push the orange button twice. First time it only drops. Only if you click in the right corner it works???

  • My ipad is working very slow touch screen is not wokring perfectly and apps keep switching off when i play

    IPad Mini, 64GB, IOS 8.1.
    My IPad is working very slow.
    The touch screen is not working as good.
    Many problems when i play a game ( Real Racing 3) keeps on turning off when i play.
    Camera is also blurry.
    Screen sometimes goes blank.

    Try these basic troubleshooting steps.
    Go to Settings>Safari>Clear History and Website Data
    Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
    If all of that fails, restore the iOS software. Backup your iPad before you restore, then restore the backup when you are done. If that still doesn't help, restore your iPad as new and start all over again. Most purchased content can be downloaded again at no charge as long as you use the same Apple ID and as long as the content is still available in the store.
    Restore iPad to Factory Settings
    http://support.apple.com/kb/ht1414
    Download Past Purchases
    http://support.apple.com/kb/ht2519

  • My computer is working very slow?

    My computer is working very slow? Since Yesterday all the operations and programs are very solw can someone help me?

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Otherwise, take the steps below when you notice the slowdown.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Iphone 5 working VERY SLOW

    My iphone 5 is working VERY slow.  Web pages are taking forever to open if they ever open at all. Also my Personal Hotspot tethering isn't working properly.  Already have tried a hard reset and it didn't work. APPS also aren't working good.  This has all happened all of a sudden a week ago.   Please advise.  Thank you.

    First try going to settings, then Safari, go down to "Clear History" and tap, then "clear Cookies and Data" and tap. Also I would also try to "double click" the home button and bring up the latest apps that are running, 4 will appear at a time. Press and hold on one app, the apps will "shake" and a minus sign will appear. Hit the minus sign on the apps one at a time and slide to the right to get the other apps and hit the minus sign on each to close out. Then try your iPhone and see if problem is solved. 

Maybe you are looking for

  • How do I set new windows to open my homepage, but new tabs to open blank?

    I have my browser set to restore the previous session when I open Firefox, and new tabs to open blank. With these settings, I used to be able to open new windows and have my homepage load, while keeping the behaviors previously mentioned intact, but

  • For each loop and modification of a LinkedList

    When going thourhg my LinkedList with a for each loop, I want to do a modification. I just saw that it cast a ConcurrentModification Exception, so it seems I can't do that. How should I do then? I don't want to go through all the list each time an ob

  • ALL Albums disappeared after update to 3.4.4!!!!

    Hi everybody! I have serions problem wiht Aperture 3.4.4 on ALL OF MY MACS!!! After I updated to 3.4.4 every single Album has disappeared from my liblary!!!!! My liblary structure is FOLDER > PROJECT > ALBUM/S. Everything is gone! However all picture

  • Airport Extreme - streaming apps error

    Hello, In last two weeks I have problems with one streaming application in my country. It uses mostly port 554. It works cca. 2h30m and then starts to drop connection until I restart router. Everything else works without any problems. Application Dev

  • Setting Contrast and Brightness while capturing.

    Hi, I have see in JMStudio that setting the contrast and the brightness during video capture is possible. For those who don't know how to do:      -> Open JMStudio...      -> Capture a video source      -> Click on the pause button      -> Menu Playe