Pagewise Balance C/f and B/f in Report 3

I have two query in my datamodel i.e.
Master Query
Account Number
OpeningBalance
Detail Query
Amount
I just want in print Balance B/f at the
end of page and Balance B/f at top of page.
When I try to put it on my page header or
in my Group Header. It show the frequency
error. So please help me how can I print
running total at the end and top of page.
null

I am not familar with what C/f and B/f stand for, but I would guess you could do what you want with a summary field, in a higher group.

Similar Messages

  • Urgent - "Vendor balances carried forward and line items report."

    Hello,
    Is there any report which will give me the vendor balance carried forward and the line items during that period.
    ==============================================
    Format-
    eg: statement taken from 1.8.2006 to 30.9.2006 is required as
    Bal b/f …………………………… 25000 cr.
    3.8.2006 Purchase Inv XXX ……   3000 cr.
    5.9.2006 Payment Chq XX ……  26000 dr.
    Bal c/f ……………………………  2000 cr.
    ==============================================
    Please advise on this.....
    Regards,
    J

    thanks for the response, but i have already tried those transactions.
    FK10N will give me the periodic bal statements and NOT line items display which will also have balance carried forward.
    F.41 and F.43 again gives the periodic and line items...but i want the vendor balances to  be in the format given above..
    like say, account statement.
    Please advise............
    Regards,
    J

  • Carry forward balance for customet and vendor

    Hi,
    I have a requirement where i need to fetch carry forward balance for customer and vendor account.I am able to get these balances from KNC1 and LFC1 table respectively but these amounts are without special G/L indicator.
    If i check transaction FD10n and FK10n there are two tabs 1.without special G/L indicator 2. With special G/L indicator and in the table KNC1 and LFC1 without special G/L indicator amount is there only.
    Can anyone have idea from where i can get With special G/L indicator carry forward balance.
    thanks in advance.
    Thanks & Regards,
    Swati

    check tables KNC3 and LFC3

  • Difference in the Balance between FS10N and Customer Balances in Local Curr

    Hi,
    When i am trying to match the Balances between FS10N and Customer Balances in Local Currency for the Period 8, we are getting the difference, The reconcilliaton Account was changed on 30.08.2010.
    Please help Us in tracing the differences between FS10N and Customer Balances in Local Currency.
    What could be the possible reasons for the differences..
    Thanks

    Hi Varshani,
    Please use the program/report SAPF070 to compare or reconcile your AR with GL balances. You can use SAPF071 to correct any inconsistencies. Provided below documentation for these programs.
    SAPF070  - Compare Documents and Account Transaction Figures
    Description
    This program compares debit and credit transaction figures in customer, vendor, and G/L accounts with the debit and credit totals from documents posted in the corresponding posting period (accounting reconciliation). The sales totals are also compared for customer and vendor accounts. There is no separate comparison for special G/L transactions.
    A comparison for G/L accounts can be made in company code currency and in parallel currencies (such as group currency). A comparison for customer and vendor accounts can only be made in company code currency.
    After the program has finished, a message is issued to the user that started the program. This message summarizes the results of the reconciliation.
    Output
    The program compares the totals of an account on a periodic basis. If the debit and credit total differs between account and documents, the account is printed with the debit and credit totals and the difference.
    Differences in G/L accounts are shown per transaction currency. The first line shows the amount in local currency, the second line shows the amounts in transaction currency.
    If a document which falls within the selection range is posted during the program run, the program is terminated since a reliable result can no longer be delivered.
    SAPF071 - Adjust Balances after Comparing Documents/Transaction Figures
    Description
    If a financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) shows that there are differences between documents and transaction figures, you can use this program to make an adjustment. The documents form the basis for this adjustment. The program adjusts the (redundant) transaction figures, which are only totals of amounts from documents.
    Requirements
    All of the following listed requirements must be fulfilled:
    1. A financial accounting comparative analysis (SAPF190) or a comparison of documents and transaction figures (SAPF070) must be made, and differences must be found between documents and transaction figures.
    2. There must not be any inconsistent documents found. These are listed in both SAPF070 and SAPF190 as well as in this program.
    3. There cannot be any problems in the other modules. Caution: You have to check this yourself. Financial Accounting may be correct but the other modules may not be, and this will adversely affect the program run.
    4. You can only make the adjustment in the ledgers which are compared by program SAPF070. This is ledger 00 or a user-defined ledger for all parallel local currencies except the group currency. (The program displays these ledgers). You have to adjust any additional ledgers as well as average balance ledgers yourself.
    5. No documents during the period in which you are adjusting transaction figures can be archived. Caution: You must ensure that these documents are not archived by establishing appropriate organizational rules and procedures.
    Only use this program after consulting with SAP or after checking the prerequisites thoroughly.
    You should adjust all differences together for a single company code. By setting the program parameters you can limit the adjustment to G/L currency types or to balances in subledgers.
    It is advisable to execute a test run first, which will list any differences that are found.
    Further notes - Authorizations
    Repair program authorization group (F_005)
    Company code authorization         (F_BKPF_BUK)
    Thanks
    Venkata Ganesh Perumalla
    Edited by: Venkata Ganesh Perumalla on Sep 28, 2010 1:30 PM

  • Trial Balance, P&L and Balance sheet at plant level and profit center Level

    HI Expert,
    My Client has multiple plants under same company code, hence need the Trial balance, P&L and Balance sheet at plant level
    Is it possible in sap to have the Plant level financial report without using the Business area concept.
    Secondly  each product is identified as profit center and in every transactions each transaction is corectly mapped to profit center, without using the F.5d (Transfer the BS items to Profit center) will it be possible to have the Trial balance, P&L a/c
    and Balance sheet at profit center level. If possible what is the T-code which will give such reports.
    Thanks & Regards
    Veda Pandit
    9844769403

    plant is not an FI concept, you need Business Area's
    any PC report should show revenue, COGS. BS items need to be transferred.

  • HT5312 Hey I forgot about the questions and answers, and when the balance of $ 15 and I want to buy software from iTunes for regrettably I could not and I were sent to you many not thrown a response, or retrieve answers frankly tired or help me and send E

    hey i forgot about the question and answers and when the balance of 15d and i want to buy software form i tunse for regettably i could

    The page that you posted from has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should give you a reset link.
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset (these are user-to-user forums).
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • GL trial balance and All inventory value reports

    Hi,
    in oracle applications 11i the inventory super user claims that the results of the following two reports:
    GL trial balance
    and
    All inventory value report
    for the period MAY-09 DO NOT match.
    How can i investigate this issue?

    I haven't worked on PPAC but I assume its only a cost method to build the cost. Once costs are build GL entry happens in the same way.
    You said that you first freeze the cost and then run subledger update report.
    Once you freeze the cost, what cost do you see for product x?
    Once you produce 20 TONS output; subledger update should generate entry as follows:
    Cr WIP: cost*20
    Dr INV: cost*20
    Now you mentioned about title ALC (GL Allocation). I haven't seen that title.
    Also at the period end we need to run revaluation of inventory for STND method, I am not sure if the same is required for PPAC. Try performing that in test instance to see accounting entries generated.
    I am sorry if I confused you or didn't understand your question. I have used mostly worked with STND method and just trying to extend my experience with PPAC.

  • I lost the little white balance dropper thingy and the option to change exposure and cannot figure out how to get them back! Help! Thank you!

    I lost the little white balance dropper thingy and the option to change exposure and cannot figure out how to get them back! Help! Thank you!

    Are you saying you've lost the "Basic" tool tab?
    If yes, just right-click on one of the other tabs and select "Basic" from the context menu that's presented.

  • Why GL balance  is splitting and displaying Bus. Area wise in F.01

    Why GL balance  is splitting and displaying Bus. Area wise in F.01, eventhough I have selected Bus. Area summarization 3 under output control tab.

    Hi Paul,
    Even after selecting 3 in output control under BA summarization it is dispalying same as earlier.  Even i have tried by selecting for both Company code summarization and BA summarization as 3, it is not displaying correct.

  • Quantity in Balance Sheet/Profit and Loss statement

    Hello guys,
    in the output of the balance Sheet/Profit and Loss statement, we have total amount of the reconciliation accounts in a period
    Is there any statement which can tell us also how many movements (lines) were in each reconciliation accounts? Like hoe many movements composed the total amount?
    this would be needed for reporting period and also for comparison period
    thanks in advance for letting me know
    hana

    Dear:
                 To check recon a/c movement for vendors and customers please use FBL5N & FBL1N.
                  Regards

  • Question about load balancing between Portal and ABAP

    Hi,
    I have the problem whit load balancing between Portal and ECC (ERC) ABAP
    Exist two system:
    1) ECC (ERP) ABAP = Backend     Module = HR
    2) EP (JAVA) = Frontend
    The users (9000 users) logon in the EP and run query (data personal) in the ECC.  The problem to all user connect in Central Instance and not in the Dialog Instance.
    How can balancing the conecction HTTP (EP) to ECC (ABAP)??
    I need balancing in the ECC to Dialog Instance

    Jco -> right. Another possibility is that you use iviews that point to the backend in this case you will need to use a load balanced entry for the backend system in the [system landscape|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/8c1e438d7017fce10000000a42189c/frameset.htm] -> SAP_R3_LoadBalancing
    If you have ESS deployed on your portal, you will most probably need to do both.
    Cheers Michael

  • In Module, the Basic panel (white balance, color saturation and tonal scale) disappeared.  How can I restore these tools?

    In Develop Module, the Basic Panel (white balance, color saturation and tonal scale) disappeared.  How can I restore these tools?

    When you say the Basic panel has disappeared, do you mean the whole right side panel or individual tools such as the White Balance tool is gone? If it is the whole right side panel that is missing, you may have hidden it. Using the Tab key, you can cycle between hiding and showing the side panels. You can also move your mouse over to the far right side of your screen to get the panel restored but it will disappear when you move your mouse off the panel. There is also a small triangle on the left edge of the right panel that you can right click on in order to determine the show/hide behavior (I personally use the manual mode).
    Regarding the individual windows contained in the left/right panels, they can be opened and closed by clicking of the triangle that is displayed next to name of the tool in its header bar. While you can elect what modules will be shown on the LR Top panel, I am not aware of any mechanism to completely hide individual tools in the left/right panels. If all else failes, you can hit the Shift/Tab key combo a few times to restore all of your windows the the default behavior.

  • How do I "fill down" a formula in a spreadsheet to get a running balance  of payments and deposits

    How do I FILL DOWN a formula in a spreadsheet to get a running balance of payments and deposits?

    using what spreadsheet program?

  • HT201304 Hi my account has balance $0.06 and i want it to be Zero balance my email: ******please response Asap.

    Hi my account has balance $0.06 and i want it to be Zero balance my email: ******* please response Asap.
    <Personal Information Edited by Host>

    Please do not post personal information on a Public Forum.
    I have requested the Hosts remove it for you.
    IamCriisChan wrote:
    Hi my account has balance $0.06 and i want it to be Zero balance...
    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

    Does anyone have a recommended network, hardware and software configuration guide for a Portal installation running with multiple gateways load balanced (ie one URL) that talk to multiple servers?

    David,
    We've used Resonate (software) to load balance the gateways. It allows
    you to group all the gateways under 1 virtual URL and load balance the
    incoming connections over each gateway depending on the rules that you
    define in Resonate. Look in the SUN portal whitepapers there is one that
    talks about it specifically.
    As far as load balancing the calls to the portals, the gateways will
    automatically load balance across all the portals that they know about
    using a simple round-robin rotation. You may be able to use Resonate in
    front of the portals but you may need to activate persistance within
    Resonate to ensure that the user always ends up on the portal that he
    established his initial connection on (if you want that), check with Sun
    on this one.
    David Broeren wrote:
    Recommended configuration for load balanced Portal with load balancer,
    multiple gateways and multiple servers.
    Does anyone have a recommended network, hardware and software
    configuration guide for a Portal installation running with multiple
    gateways load balanced (ie one URL) that talk to multiple servers?
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

Maybe you are looking for