Paging PAHU and Matt

Guys,
There's a person with a Macbook trying to use hpijs over in the Getting Online area. Thread:
http://discussions.apple.com/thread.jspa?threadID=990792&tstart=0
I could use some help - especially since I don't have an Intel Mac and don't remember whether you have to use Rosetta to use hpijs/ghostscript on a MacBook.
Thanks

Hi Greg,
I did some testing on my MBP. I don't believe it is an Intel issue but I don't have a HP to connect to so I cannot be 100% confident of this. I created a connection to an IPP port like your postee using the ppc versions of hpijs v2.0.2 and the espgs 7.07. I then submitted a print from TextEdit, which if there was a ppc/intel issue then this should have resulted in an error. However the job spooled without the foomatic rip crashing as shown...
I [11/Jun/2007:13:36:29 +1000] Job 150 queued on '10_0_05' by 'pahu'.
I [11/Jun/2007:13:36:29 +1000] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 307) for job 150.
I [11/Jun/2007:13:36:29 +1000] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 308) for job 150.
I [11/Jun/2007:13:36:29 +1000] Started backend /usr/libexec/cups/backend/ipp (PID 309) for job 150.
Of course the job timed out and needed canceling but I don't believe the lack of a destination printer would have changed the result.
So I think it may be more be of an issue with the connection to the wireless Linksys print server. I didn't read the complete post - has he tried connecting the HP directly to the MBP? Might be worth getting it working with a direct connect and then moving it back to the print server?
Good luck,
Paul

Similar Messages

How can I animate colour changes of clips and mattes in fcpx

Can Anyone help me in getting to grips with ficpx.
I want to vary (animate) the colour of titles and mattes over their time periods. Also, i need to correct the variations of colour temperature (castes) which my panasonic camcorder produces sometimes. I notice that there is no animation icon in the inspector panel for colour changes and I am not able to insert animation points on the timeline animation strips above the assets. Any help would be appreciated. Lorenzo F.

Color correction and color masks cannot be animated in FCP. You'd have to do this in Motion or some other app. DaVinci Resolve Lite is free.

I am watching a Creative Live Lightroom Crash Course with Jared Platt and Matt Kloskowski. They mentioned that Lightroom CC was available. I went to your site and clicked on it, but the download was for Lightroom 6. What is going on? I wanted Lightroo

I am watching a Creative Live Lightroom Crash Course with Jared Platt and Matt Kloskowski. They mentioned that Lightroom CC was available. I went to the Adobe site and clicked on it, but the download was for Lightroom 6. What is going on? I wanted Lightroom CC.

Yes, it looks like they've screwed up. Some people have been able to update CC to LR6, some people get half way through the download and it fails, some people (me included don't get any option to upgrade to LR6 in the CC app... It's all very annoying. I tried the help chat, and I got "log out of the CC and try again in 2-3 hours". Well, that was half an hour ago, but I'm not holding my breath for getting LR6 today.

Paging/displaying and selecting records in jsp

Hey,
I needed some info on paging, displaying and selecting records in a jsp. Any direction in terms of which technique is the most efficient(which tags to to use etc). Any online resources which go into some detail would be great. Basically working with a list of objects.
Thanks in advance for your assistance

Here is at least one online resource:
http://www.google.com/search?q=jsp+paging

Quest - The Finishing Touch: Framing and Mattes?

Quest - The Finishing Touch: Framing and Mattes?
A couple of months ago max I acquired PSE 13.
My goal is to make my shots to the point so that they look finished & polished complete with suitable frames or mattes.
I know very little in regards to what the options are and how to get there. This is just for my desktop.
I've seen nice ones online for sale, however at this beginning stage, I'd rather find some at no cost or learn to make them myself.
Especially interested in mattes, how to create and to incorporate them.
What capability does PSE have in this regard?
Any tips, resources, suggestions, thoughts on the matter, pointers, how to proceed or what direction to head is appreciated.
Thanks in advance.

Funny how every other main page on the apple.com site displays perfectly in iPhone portrait mode
Not funny at all. All the other pages are portrait, with more information going down the page than the home page, making them longer. You do understand the difference between portrait and landscape don't you?
the same meticulous attention to detail was missing.
It's not "attention to detail" - it's simply the difference between a short page and a long page. Geez!

What is recommended size of System drive to keep operating system files , paging files and Memory Dump of hyper-v host.

Hi ,
I want to setup hyper-v host with 128 GB RAM , Windows 2012 R2
What is recommended size of System drive to keep operating system files , paging files and Memory Dump?
I tested to using 150 GB , but when the server is crashed, there is no free space to keep memory dump file.
Ramy

Hi Ramy,
For Server 2012R2 the absolute minimum system drive is 32Gb but this assume you have limited RAM or have your Page file located on another drive. It used to be best practice to setup a small page file but MS PFE now suggest leaving windows to manage
the page file size.
Obviously this is not always possible depending on the amount of RAM in the system, but base the system drive around this or offload the Page file to perhaps another drive. On top of this you also need space for the memory dump to be written, potentially
again up to the size of the RAM. Assuming you fire the machine back up after a crash, you need space for the OS, the Page File plus space for the associated dump file.
There is a nice little article here that maybe of assistance: http://social.technet.microsoft.com/wiki/contents/articles/13383.best-practices-for-page-file-and-minimum-drive-size-for-os-partition-on-windows-servers.aspx
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Glossy and Matte Displays Interchangeable?

A friend of mine has a late-2006 MacBook Pro 15" (MA609LL) with a broken glossy screen (B154PW01 V0) and would like to replace it with a matte screen (BP154PW01 V1). Are glossy screens interchangeable with matte screens in this instance?

Ask the folks at http://www.ifixit.com

Setrow with Paged Dataset and Master / Detail containers

Hi,
I am building a photo album.
I am using paged views on the photos as the collection is currently 132 and growing. So I have a paged view of 15 photos at a time, which are in a master container. I want to be able to click a photo thmubnail and for it to update the large photo in the detail region. However with paged views it doesn't seem to update the current row in the detail region. If I used the Spry dataset the pagedview is built on the setrow functionality works fine.
The page is here www.thehmc.co.uk/photo4.html
What are my options to get this working?
Cheers
Phil

Hi Phil,
This is completely out of context and I am probbaly risking a flame, Still I want to share the following piece of code with you.
<p> © 2008
<script language="JavaScript" type="text/javascript">
            var d=new Date();
            yr=d.getFullYear();
            if (yr!=2008)
              document.write("- "+yr);
          </script>
Created / Maintained by Phil Whitehurst</p>
This will automatically update the year.
Ben

Paging: in and outs.

Hello,
I've read a lot of articles about memory management in Mac OS X on this and other forums. But something caught my attention, and I think you could help, if you please.
I've read that paging out is bad, and if its growing constantly, you should add more physical RAM.
However, I couldn't find anything about paging IN.
On my iStat, shows I have 50,000 page in. What does that mean? Should I add more RAM? Is that bad as page out? Don't need to worry?
I have concluded also that swap files are more like a emergency or a last resource utility. Being that said, how could I have paging outs when Activity Monitor shows more than 700Mb of Free RAM?!?
Don't think something is going normal, and I just bought my new MacBook, sad... please help.
I used Leopard Cache Cleaner to optimize ram, among other things, don't think that was helpful either.
Summarizing:
1) Should I worry about 50,000 of pagein?
2) Having 700Mb of Free RAM, is it normal to have pageouts?
ps: Status retrieved when running these applications: Safari(1 tab); iTunes; Microsoft Messenger; Microsoft Word; Transmission; and, uh... Finder.
Thanks,
Danilo.

On my iStat, shows I have 50,000 page in. What does that mean? Should I add more RAM? Is that bad as page out?
As already mentioned, page-in is how Mac OS X (and many operating systems) load programs into memory. And yes pages paged-out may end up being paged back in, but that is noise compared to other normal page-in activity.
how could I have paging outs when Activity Monitor shows more than 700Mb of Free RAM?!?!?!
You are trying to compare Grapes and Cranberrys. The 700MB of free RAM is a "Current" amount. The Page-outs is a cumulative from when you booted your system. You can not compare the 2.
If you have installed the Xcode developer tools from your installation DVD, then you will have the vm_stat command line utility. Start an Applications -> Utilities -> Terminal session. Run the command
vm_stat 60
Let this run in the background while you use your Mac normally. It will output paging information once every minute. After an hour or so of normal usage, go back and look at the vm_stat output.
Look at the pageout column (last column). If most of the values are zero or very low numbers, your memory is fine (ignore the values just after the header lines as these are cumulative values).
If you are seeing large numbers for pageout (100's or even 1000's of page-outs) per minute, then you could use more memory.
If mostly you have zero or low page-out numbers, but once in a while when starting up a big application you get a short duration page-out spike, this is not really a problem, and virtual memory is doing what it is suppose to do, namely allow you to run lots of applications without needing to over spend on memory.
If while using your Mac you notice annoying slow downs, especially when switching between applications, and you examine the vm_stat output and see serious page-out activity during that period of time when you were experiencing the slowness, then more memory would be helpful.
If you think you have identified an activity that is running slow because of page-outs, then run vm_stat with a shorter time interval, such as:
vm_stat 5
and then run through your slow activity and look at your vm_stat page-out values to see if there is a direct relationship between your slowness and page-out activity.
Again, a few page-outs per minute with a once in a while page-out spike is not a problem.
But if "Money is No Object", then by all means, buy more memory. The memory vendors will thank you

Paging space and SQL question

Can someone tell me why a SQL statement , ie.
select count(*) from some_table;
Would take up excessive paging space on my server.

thank you for your help rago, but I am afraid I am
more confused from your response.
is important investigate on the minfree/maxfree,
is the amount of the RAM dedicated at procs/file ,on unix
What do you mean here?contact your sysadmin,
this parameter, OS, indicate the amount of the RAM
to dedicate at proc and/or at files !
similar parameter
pghead
minperc/maxperc ...
investigate on the
pagefault/syscall/swap area/pagin/pagout/. . .
top
topas
admintool, ?,
vmtune
>
And are you suggesting I increase my Shared pool to
375MB ?this the limit suggest to increase the sga on your system,
if the system have 1500 MB of RAM ,
then max amount suggest for allocate the SGA is 75%,
1500 * 0.75 = 1125 for the 3 instance, on the machine !
1125 / 3 = 375 MB of RAM suggest to allocate.
I feel like , and my database is showing symptons of
the shared pool using paging space - so indicating
the shared pool is more than the available RAM.the question is:
1- if you have sufficient SGA, 1125 MB
but the OS dedicate to processes only
its 20% of the RAM -> 300 MB of RAM
the remaining is swap, that increase dayly !
2- if you have insufficient sga, the sga
swap continuously , with high page fault.
rago pasquale

Paging key and multicast

Have an issue with SPA525G2 + sidecar, firmware 7.4.9c When setting up a paging key as either page button or speed dial, seeing an issue where every subsequent inbound and outbound call is multicast to all lines in a page group. The problem only manifests itself on a 525G with a sidecar. Problem does not happen if the user manually dials the page code. The trouble only clears after the set is rebooted. Remove the sidecar and the problems goes away. Our customer is looking to have a dedicated button for this so I have him dialing the code manually until we find out what's causing this. Anyone see this before?

Hi every one Thanks for the response. I have a structure which has partner1 to partner10. I have key figures in colums pct1 to pct10. I am using cell editor here to display values like this.
Partner1 pct1
partner2 pct2
partner3 pct3 like wise.
Now when i run the report i can see partner1 30%
                                    Partner2 45%
                                    Parnter3 10%
My requirement is i need to display key and text for partners (partner1 to partner10).
eg: (key)     (text)   Pct
    0000456   stallin 30%
    0000456   peter    45%
    0000537   haider   10%
Thanks
Basava

Flash and matte

In my little silly game I have some small "stars" faling down
from heaven. The stars is made in Flash and rotating. My little
monster should avoid this rotating stars but he always get hurted
by the area round the star. I can´t get it transparent other
with "background transparent" and there´s the prb. How to get
a Flashmovie transparent so I can have "matte" on it?

quote:
I´n not really shure what "Off the top of my head"
means.
Sorry, it means, with little thought.
quote:
I´ve imported via "insert/mediaelement/Flash" and also
checked that it´s not directToStage. Also tried with script,
both movie and behavior variant´s with on
startmovie,enterframe and so on..
Well, this time I have actually pulled in a Flash member and
played a bit with it. I don't often use Flash within Director as an
animated sprite.
Indeed you can not set it to Matte ink. Taking a guess
though, it is most likely because of the sprite format itself.
Understand that what is one Stage is actually an instance of the
Flash Player itself. Setting Background Transparent is likely
sending a call to the Flash Player to turn the background "layer"
off.
Because Director has no control over the Flash sprite itself,
it is unable to Matte, Darken, Lighten, etc. the sprite.
Perhaps look into extracting the frames of your star
animation as a PNG sequence and then building a filmloop or some
such within Director. then you could Matte with no problem.

Scale and Matte

When I shoot using my crappy camcorder or when I used an XL-1 to make my first movie. There were two constants.
1. When I looked in the MOTION section of the VIEWER the clips always started at 100% in SCALE.
2. If I used motion keyframes on a clip and then added a widescreen matte the matte would be on top, so the movement would not change the size of the picture. It would just seem like the camera zoomed in.
The above were used with Final Cut 4.5 and I had no problems.
I've just updated because we're using advanced equipment.
Here's the basic technical info I think might be needed to help figure out the problems.
I have Final Cut 6.0.1 with a G5 PowerPc
Camera being used; Canon 5DMKII HD video
The video codecs is Apple ProRes 422 (LT), Timecode, Interger (Little Endian)
Vid Rate is 23.98
Frame Size 1920 x 1080
When I drag a clip to the timeline it says:
For Best performance your sequence and External Video should be set to the format of the clips your editing. Change sequence setting to match the clip settings? I click YES.
It plays great.
I noticed when I go into MOTION in the VIEWER the scale is at 66.67 or 37.5 %.
The picture in the BROWSER is perfect. When I export it plays perfect on my computer.
While this might not be a problem, if I export a movie and show it on a huge screen, will the scale pose a potential problem? Is there a reason with this new equipment that the scale changes so drastically?
My second problem is using keyframe motion. We're shooting widescreen. So, when I add keyframe motion is destroys the size. I add a widescreen matte over the motion. It doesn't work. The size still changes as the motion takes place. I can't figure out this problem.
However, if I just cut a clip in two and increase the size of the scale, then place a widescreen over the enlarged scale it works perfectly.
Any help with these two items would be greatly appreciated.
Thanks: George

I was given the answer to the matte. I drag a sequence onto a sequence and add a widescreen matte to the new sequence and it works great.
I'm still curious about the scale size. I don't want to edit an entire movie and then find out the scale destroys the image when blown up large. Yes, my first movie made it to a festival and this one will to. It will.

SSD and matte screen

Is it possible to install SSD on the new MacBook Pro with retina display, and does it have a configuration with a matte screen?

http://store.apple.com
Click on the MacBook Pro item, click on the Select... button, pick your base model and click on its Select button, then Configure the extra options. The options shown are the only options available for that particular base model. The total price refreshes in real time. When done, can purchase online and have it shipped to your home address or shipped to your nearest Apple Store for you to pick up.
The biggest, most expensive Retina can have the 768 GB Flash (not SSD) storage option for an extra $500.
The widescreen/antiglare option is available only on the 15" non-Retina MacBookPro's for an extra $100.
The 15" non-Retina MacBookPro's also have the 512 GB SSD option for an extra $900.

Matte magic and matte choker feather not working

I dropped out a green screen using primatte RT. It cuts out nicely, but the edges are hard. I applied matte magic or choker to use the feather feature. It has no effect! I have also tried adjusting the settings in Primatte Rt and still get no feathering of the edges.
Any pther way to feather edges of get the feather feature to work correctly?

Those effects and settings work for me so I'm just going to guess you're applying them incorrectly, viewing the results in the wrong place, or maybe you have them in the wrong order in the filters stack.
bogiesan

Paging PAHU and Matt

Similar Messages

Maybe you are looking for