Pai Chart layout and Tool Tip not refreshing

Hi All
We have an application where we displaying data on Pai Chart based on Data-Grid row clicked.
Its an Polling kind of application, where multiple option are there.
When a data grid row clicked, in the Pai chart we displaying polling votes in percentage.
Some question has 2 option and some 4 and out of those few are having votes.
Ex: Question 1 has 2 option ( A, B ) and both got some votes.
Question 2 has 3 options ( X,Y,Z ) and only " X " got all the votes.
So when we clicked on data grid row for Q1 the Pai chart shows all the options ( 2 ) in block dividing manner.
It has also outward tool tip to show the count and percentage.
And when we clicked on Q2 which has 3 options but got votes for only 1, the Pai chart shows perfectly with 100% and one circle without divide, but the tool tip of Q1 not cleared. It shows tool tips of Q1 as well as Q2.
And when adjust the Pai Chart Layout, then only it clears unwanted tool tips, but not automatically.
For better understanding i have attached the screen shot of the problem. please look into that once.
So any one who faced similar kind of problem or know the solution then please help me.
Thanks
Bijaya Kumar

Hi Mitalee,
Would you please check the PAM at https://websmp108.sap-ag.de/~sapidb/012002523100018972812014E
On page 11 it says 64 bit IE11 is not supported; is your IE11 32 bit or 64 bit?

Similar Messages

[svn:fx-4.x] 14985: Add support for mirroring for both error tips and tool tips in positionTip ().

Revision: 14985
Revision: 14985
Author:   [email protected]
Date:     2010-03-24 09:40:24 -0700 (Wed, 24 Mar 2010)
Log Message:
Add support for mirroring for both error tips and tool tips in positionTip(). The layoutDirection of the toolTip will be the same as the component it goes with, or LTR, if the component is not ILayoutDirectionElement.
QE notes:
Doc notes: None
Bugs: SDK-25821
Reviewed By: Jason
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25821
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/framework/src/mx/managers/ToolTipManagerImpl.as
    flex/sdk/branches/4.x/tools/dependencychecker/frameworkSwcExceptionsList.txt

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

CS4 Show tool tips not functioning in adjustment mode

Show Tool Tips function is not functioning(no display) in any adjustment panel. Was working previously. It is checked in preferences and does work on uppermost main tool bar. At times it was slowish to respond but eventually did. Working with PS4 in Design Premium. Checked function box on and off several times as well as opening and closing program and also shutting down computer. Any help or something else I need to look at in preferences? Thanks. Bob
Edit: Tool Tips function works fine in "In Design" and "Illustrator" so it appers it has to be something in Photoshop

Thank you for your reply.
I tried that link several weeks ago and did a reset, I do not want to do delete the preference files if at all possible. I am certain that you know what my problem is but if you don't mind. I would like to clarify what is going on. Previously in the preferences file under the interface label there is a box to turn on or off the tool tips function. It has always been "on". Whenever I wanted to see what an icon's function was related in a panel I placed the cursor on it an it would show it's function. I. e. make a new layer, mask, etc. It no longer does that when I am in the adjustment panel. The function works when I click on it and that is not a problem. All I want is the tip or hint or label as to what the icon's function is to appear and that is what I ubderstand is what the show tool tips function I have CS3 running on another machine and this function it works fine. If I turn it off in the preference fill it no longer works I also have elements 8 on my daughters laptop and that is also fine...on works, off doesn't workI do not have any problems in the tools venue. All function properly and all sub menus work fine.
Any other suggestions will be appreciated. Thanks again for replying

Alt-text 'tool tip' not appearing on some images

We get pdf files created by outside sources that we then need to publish on our webpage. I add tags to the pdf, then add the alt-text to the images via the Touch Up Text tool. As well as I can determine, the tag for the alt-text is present in the pdf. The Read Out Loud function in Acrobat reads the alt-text correctly as does a screen reader. But the 'tool tip' does not appear on all images. It seems that the more complex, mulitple layered dwg type images do not display the text, either from the browser, or from Acrobat itself. Other dwg source images do work, and photgraphic images are ok.
I have gone back through the pdfs to verify the existence of the figure tag, and that the alt-text is there.
I have opened the tags dialog, looked at the properties, and added the text to the Title field as well as the alt-text and Actual Text.
I have converted the images to jpgs, which resolves the issue, but greatly reduces the quality of the image.
I am using Acrobat Pro 8.1.4 on a Windows XP, sp2 system.
I am aware that the ADA requirement do not require the 'tool-tip' to function, but when you have many, many pages of images in a pdf using a screen reader or the read out loud function to test is not feasible for testing. We need to have the tool-tip working, and I have run out of ideas on how to make it work.

I just figured out that those photos had been set to a blending mode of Multiply
because an earlier iteration of the design used transparency. But to the eye, they
look like normal photos, so I didn't realize they were set to Multiply.
This solved the problem but it's not heartening news. What if my graphic legitimately
did have a blending mode set? What would my workaround be if I needed to set Alt Text
for those images?

Tool tips not displaying

I am running AI CS3 on Windows Vista and my tool tips do not display. I have the option selected in my preferences and have restarted the system after install to see if that helped. No luck. Thanks in advance for any help.

Is caps lock on? If so, turn it off.

Making Global Activity Heading Bold and Tool Tip over columns in OBPM10GR3

Hi all,
I would like to make my Global Activity Heading in Applications in the workspace BOLD and change the FONT of it.
I also would like to have a Tool Tip explaining what a column in the view means.
How can I do these things in OBPM10GR3?

Thanks for the reply valf - you can see a trial version of the page here http://www.banded.co.uk/festighoul_trial.html
Notice that there is a large empty black div at the top of the pagewhere flash content should be playing... The tool tip trigger is nearer the bottom of the page (a graphic of a '?')
Thanks

Adobe Muse guide tool tip not visible

I can't see the tool tips from the guide. How do I turn these on so they are visible and I can use them? Now the only way to change section sizes is using the page properties.
Thanks

Hi Kiran,
Please go through the below link:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2dbb13d79f3446e10000000a155369/frameset.htm
Here the method to hide the toolbar is given. Try passing ABAP_FALSE in method: lr_method_handler->set_hide_toolbars( abap_false ) if it works.
Regards,
Vaibhav

I have reinstalled CS5.1 extended on my new Lenovo Laptop with Win 8.1 64 bit. No installation problems, but now Image Adjustments and tools do not work any more.

Operating Problem with CS5.1 extended. I replaced my old HP Laptop with a new Lenovo laptop with Win 8.1 and reinstalled CS5.1 64-bit version. The software downloaded and installed correctly and worked for a day, but when I rebooted the next day, the Image Adjustments and tools functions did not respond any more. I have uninstalled and redownloaded/ reinstalled without success.

Notebook Info
1 x Lenovo G710 Notebook, Intel® Core™ i5, 43,9 cm (17,3 "), 1000 GB HD,
Intel Core i5-4210M 2,60 GHz, (Turbo-Boost 2.0 bis 3,20 GHz)
43.9 cm (17.3") 900p (HD+) LED-Display (1600 x 900)
8192 MB DDR3-RAM
Harddisk: 1000GB SATA
NVIDIA N15V-GM mit 1GB DDR3
Prefs
As per download settings, I changed nothing
Image Info
Jpg conv.from RAW Canon, dim. 4746x3567, 6,64 Mb
The software worked on the first day, problems appeared next day. I uninstalled and deleted the exe.file, then redownloaded and reinstalled but same problem persists.
I then downloaded and installed on my PC and everything works.
Regards Roland

Family Mode disabled, Layout and publication mode not visible

Hello Experts,
While working in the data manager, i see that the family mode is diabled. Also, the layout and Publication mode arent visible. What am I missing?
Thanks for your help.
Regards,
Sri

hi,
To view the family mode:
In the console you should have family table set up
For Publication & layout mode:
In the new releases of SAP MDM 5.5 from SP4 and above releases,
you will find MDM publisher: in this you will do the layout and publication. To open publisher you have to install MDM layout server.
hope this may help you,
Regards,
srinivas

PS path/tool cursors not refreshing

Hi everyone
I'm using PS version 12.1x32 (CS 5.1 Extended) and recently i've been getting some erratic behaviour when creating clipping paths/using other tools.
For some reason, as I'm creating a clipping path, the results of my work aren't showing up unless I either change my view setting or changing my zoom level (which leads me to think it's a refresh problem). Even when I'm done with the clipping path and I move it around, it still doesn't update, only showing the last position (see screen grab below). Has anyone come across this behaviour before and is there a solution? Also, when using other tools, such as rectangular marquee (but not limited to it), my cursor dissappears whenever i'm using the tool. It's a bit annoying to be honest...
Thanks
(note position of path outline in preview window vs actual position in path panel thumbnail).

It seems that OpenGL being enabled had something to do with it. It's working now.

8.6.1 HELP and TOOLS- OPTIONS not working

Hi, after installing 8.6.1 I'm not able to access help for any function, except on tookit functions. The context help works, but there is no detailed help (except Toolkit functions). If I access LabVIEW help, the window shows the tree on the right, but when I click on any of the items no help appears in the window on the right.
Also when I click on tools->options it searches for <helpdir>\_launchhelp.vi which it never finds, so I cannot change any of LabVIEW's options either.
I installed using the Developer Suite DVD's, I do not think there was an explicit option to select Help. I installed to D:\program files, would it be an issue if you don't install to C:?
I uninstalled previous versions before installing 8.6.1.
Any ideas?
Message Edited by AnthonV on 05-20-2009 03:00 AM
Solved!
Go to Solution.

Hello,
It seems you're installation in corrupt to some extent.
You can repair you're installation by going to: Control panel->Software->National Instruments. Then you get a dialog in which you can select LabVIEW 8.6.1 and REPAIR.
If it still doesn't work, you can always contact your local sales office for support.
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

Posts to FB are not appearing or refreshing (but are all visible on Chrome); And emails are not refreshing either. What gives?

Fonts were wonky recently too. What's going on?? I prefer Firefox to Chrome, but this is a problem.....

Are your cookies setting "Ask me every time"?
*http://kb.mozillazine.org/Cookies
You can remove the current cookie exception for www.facebook.com and create an exception for facebook.com instead to include all facebook domains.
*[[/questions/934784]]
Can you attach a screenshot of the font problem?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
You can do a check for corrupted and duplicate fonts and other font issues:
*http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
*http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

Once clear Triggers in Tool Tips, now showing white in IE, after newest update?

I had published on catalyst, and tool tips were clear... after newest Muse udpate the tool tips triggers are now showing as solid white in Explorer. They still look and work fine on my Mac in
both Firefox and Safari.
I cannot go in and access the triggers anymore because they are clear - and there is no frame or way to edit!
1. what is going on with the white boxes now showing.
2. how would I make a change/move/add to a trigger in tool tips once they are 'filled clear'?

1. If you can post a link it would make it easier for team/forum to help out.
2. Yes that does suck and we've all done it. The standard workaround when going for a clear/no fill look is to set the opacity to 1% with a color that matches what's beneath it. Doing so ensures that it is editable after the fact using the standard click method. The good news is you can get it back, but it often takes a neurosurgeons touch and patience.
The program is nano sensitive in this state, in my experience. So find the area with your 'missing/non responsive' trigger and very carefully hover the mouse around in micro increments until the trigger is dicovered. Then very carefully click on the dark orange bounding box until you get the blue bounding box. (Note-The cursor must be in the arrowhead state to get this to work. Not the arrow with the tiny black box and not the arrow with the stem. Just the arrowhead). Once you've rediscovered your trigger (blue bounding box) do not click again or else you'll have to start this all over. You will now notice at the top left in your menu that the trigger is selected and you can change the fill from there using the 1% workaround. One other trick to help fascilitate the process-zoom in.
Keep this in mind for all elements in Muse when going for the invisible look.
Hope that helps at least one of your glitches.

Import/Export tools has not been installed

Hello,
I've isntalled client of Designer 6i rel.2 The whole installation has passed correctly up to the moment when the installer for 8i import/export tools has to be invoked (the setup write that install tool will be run to install 8i i/e tools and the java-based instaler should appears). The installer do not wake up and tools are not installed. Cannot import repository from previous installation and moreover (AND MORE IMPORTANT) when running Net8 Conf assistant and Net8 Client configuration it finish with GPF ("Program made an illegal operation and will be terminate")
Any sugestions?
Best regards
VooVoo
null

Hello,
I've isntalled client of Designer 6i rel.2 The whole installation has passed correctly up to the moment when the installer for 8i import/export tools has to be invoked (the setup write that install tool will be run to install 8i i/e tools and the java-based instaler should appears). The installer do not wake up and tools are not installed. Cannot import repository from previous installation and moreover (AND MORE IMPORTANT) when running Net8 Conf assistant and Net8 Client configuration it finish with GPF ("Program made an illegal operation and will be terminate")
Any sugestions?
Best regards
VooVoo
null

Region does not refresh in Address ESS.

Dear all experts,
When updating address of employee who belongs to Kuwait country group on web portal ESS, all regions are Kuwait specific and regions do not refresh if employee chooses a different country to update emergency or permanent addresses.
Can you help on this problem?
Thanks and kind regards,
TramNguyen

You have to create a new address using the NEW button from the overview screen in order to enter a new country within the address screens. You cannot update country within the existing addresses as they screens will not update based on the new country selection. In fact the country should not even be an open field on the screen when in edit mode. If you do not have a NEW button on the overview screen, please check your configuration for subtypes for ESS within the IMG.
Cheers,
Mike

Pai Chart layout and Tool Tip not refreshing

Similar Messages

Maybe you are looking for