Painfully slow connection with new master socket

Hi forum
Hoping for some advice or perspective on possible issue with my broadband connection. Perhaps unrelated, but I recently had a new master socket fitted (NTE5), however the broadband speed in the house is now painfully slow.
Am using BT Home Hub 4, below are the rest results I'm receiving, however I'm curious as to whether 0.25Mbps really is likely to be the maximum achievable speed, as this renders several services almost unusable.
Grateful if anyone feels there is more that could be done.
Thanks,
Kevin
Results....
The only socket connected is for the router/ phone, which is now connected to the test socket (with a microfilter).
Quiet line test: normal
Speed info from the hub manager (normal socket/ test socket)
Download speed (Mbps): 0.17 / 0.24
Upload (Mbps):                0.03 / 0.02
Ping latency (ms): 326.50 / 0.00
ADSL connection (from home hub)
12:02:59, 29 Jun.
(334146.810000) DSL noise margin: 16.50 dB upstream, 10.60 dB downstream
12:02:58, 29 Jun.
(334145.900000) DSL line rate: 440 Kbps upstream, 284 Kbps downstream
Speed test (from BTW performance test)
1. Best Effort Test:  -provides background information.
Download Speed
0.17 Mbps
0 Mbps
0.25 Mbps
Max Achievable Speed
Download speedachieved during the test was - 0.17 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps.
IP Profile for your line is - 0.25 Mbps
2. Upstream Test:  -provides background information.
Upload Speed
0.03 Mbps
0 Mbps
0.83 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 0.03Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Please visit the FAQ if you are unable to understand the test results.
From kitz.co.uk max speed calculator
Estimation of your maximum rate adaptive adsl speed
Downstream
Attenuation
0 dB
Approx
Line Length
0 km
From BT Diagnostics site:
Broadband Speed Test
We haven't been able to complete the speed test at this time.
This may be due to a problem with the speed tester, or your line may be running very slowly.

Thanks for your quick response, much appreciated. Further results below - suggesting that faster should be possible?
The connection time from 12 was due to a manual reset, the only time it was reset (WAN logs also noted below).
ADSL Checker....
Telephone Number 01562xxxxxx on Exchange WOLVERLEY is served by Cabinet 3
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
WBC ADSL 2+
Up to 13.5
11.5 to 15
Available
WBC ADSL 2+ Annex M
Up to 13.5
Up to 1.5
11.5 to 15
Available
ADSL Max
Up to 8
7 to 8
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Copper Multicast
Available
12:02:59, 29 Jun.
(334146.810000) DSL noise margin: 16.50 dB upstream, 10.60 dB downstream
12:02:58, 29 Jun.
(334145.900000) DSL line rate: 440 Kbps upstream, 284 Kbps downstream
12:01:36, 29 Jun.
(334063.890000) DSL is down after 2226 minutes uptime
12:01:36, 29 Jun.
(334063.890000) ETHoA is down after 2226 minutes uptime
12:01:36, 29 Jun.
(334063.550000) PPPoA is down after 2226 minutes uptime [Waiting for Underlying Connection (WAN DSL - Up)]
12:01:33, 29 Jun.
(334060.470000) PPP LCP Send Termination Request [User request]

Similar Messages

New infinity install with a master socket move - w...

As I understand it, Infinity requires a modem plugged in directly to the master socket & a power point adjacent also. This is of no use to me at all & I would like the master socket moved. Now, from what I read here, BT will do this "officially" for £130, or on an infinity install, the openreach engineer *might/should* do it if it is straightforward.
I plan to run cat 5e cable from the master socket location, up a cable run we have in the property to the new location where I want the master socket to be located, leaving both ends unconnected. Then it should be simple enough for the engineer to connect at each end and then carry on working from the new master socket location. Maybe they could even use the second pair in the cat 5e to reconnect the original set of phone sockets we have around the house that are currently connected from the existing master socket.
Could someone advise please...
1. Is cat 5e cable the correct cable to use?
2. Does my plan sound viable? Is it technically correct?
3. Could the second pair in the cat 5e be used in the way I have described? Thanks in advance.

Thanks for the reply & welcome Michael.
Some subsidiary questions then please.
1. Should I run a different sort of cable other than 5e? If so, what would be the correct type?
2. Your very helpful diagram suggests that BT would surface run up to 30m from the Master Socket to the modem. My cable run would be much less than this. Would I be better to run cable myself (in my cable run) to be used as the connection from the master socket to the modem? If so, what sort of cable should it be please & does it need to have a connecting plug on the end of it (where it plugs into the master socket) or will the OpenReach engineer fit this him/herself. I guess if they surface run cable they will be able to attach the plugs on the end of the cable. What sort of connection is it?
Thanks for you time - and for anyone else's who replies.
I should also say I am not bothered if the Master Socket is moved, AS LONG as the modem & router (home hub) are NOT located adjacent to the current position of the Master Socket. I estimate the direct cable run required if I run the cable will be no,more than 15 metres.

Very slow connection with Mifi 4510L??

I'm hoping someone here can give some guidance. I am having very slow connection with the 4510L we just got. Via test on speedtest.net I'm seeing download speed of .17 MBPS at times it was so slow the test was not completing. I normally have 1 or 2 bars on the mifi unit and have seen up to 3 at times. I drove into town and see the same range (1 to 3 bars). I have yet to see the 4G light come on except for prior to activation (would light solid green at times) since activating I have only seen the violet light for 3G.
Verizon advertises full service both around our city (Richmond, VA) and at my more remote location in Hanover. I have been through the recommended resets and nothing seems to improve the connection speed. Could the unit itself be defective? Also, I've noticed when I go to a location website it thinks I am in Pennsylvania when I am in Virginia. Could the Mifi be trying to connect to a signal in that location for some reason (was refurbished device)
Thanks for any help you can offer,
Brian

I was having problems but upgrading to 2.28 seems to have helped me in addition to a few other changes I made based on this review of the 4510L
http://www.anandtech.com/show/4500/novatel-wireless-mifi-4510l-review-the-best-4g-lte-wifi-hotspot/4
1) "selecting WPA2 Personal/PSK (AES)"
2) "manually selecting a channel (instead of Auto) fixes almost all the instability problems"
(I'm not sure if it actually worked as the diagnostics always shows channel 0 no matter what I picked. I did try a couple before one - or the myriad of other things I tried - seemed to make a difference - at least for now - fingers crossed)
3) "allowing for one to select between each network mode manually, so you can force 4G LTE, EVDO, 1xRTT, or all of the above. This is incredibly useful if you’re right at the cutoff for 4G LTE SINR" (that's WWAN Preferred Mode LTE only for me)
4) I also changed my 802.11 Mode to just one mode that works on both computers at my house
5) I am also careful to turn it off when I am done with it and take it off the charger for the night as well.
It is my only internet service due to my semiremote location (no cable etc) and when I first got it as a replacement for my dependable 2200 I was about to pull all my hair out. I was "forced" into it because due to antenna issues on a local tower that supplies my 3G signal my 2200 wasn't even able to load my gmail account. Verizon very helpful on that - call us if its still an issue in a "few weeks"! However, when I inquired about the antenna's effect on a 4G signal, an intelligent tech was able to tell me that it was not the tower I would be getting a 4G signal off of - odd but I didn't question that possibility.
It runs very very warm but I suspect having it on the charger and using it almost all day is part of that. At first I was wondering if heat was part of the problem - going so far as to have it sitting on an ice pack to test that theory. Of course then I had to wonder if maybe I was freezing it -lol. I am careful to turn it off when I am done with it and take it off the charger for the night as well.
I've been on it most of the day and it seems to be behaving well - so fingers crossed

XIO: fatal IO error connection with a remote socket was reset by socket

dear all ,
i have ebs running on aix 6 server
oracle db : 11.1.0.7.0 - 64bit
ebs version : 12.1.1
the problem is i have report running on cuncurent schedule , but the result with status complete error ,
when i view log , it shawn error below this
Enter Password:
XIO: fatal IO error 73 (A connection with a remote socket was reset by that socket.) on X server "localhost:0.0"
after 498 requests (469 known processed) with 4267 events remaining.
Report Builder: Release 10.1.2.3.0 - Production on Mon Sep 24 20:04:26 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 30072710.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 30072710 on node SMJKT-PRFN02 at 25-SEP-2012 00:05:51.
Post-processing of request 30072710 completed at 25-SEP-2012 00:05:55.
any suggest to solve this error ?
thanks
Imron S
Edited by: Imron Siagian on Sep 24, 2012 8:57 PM
Edited by: Imron Siagian on Sep 25, 2012 2:57 AM

Hi;
XIO: fatal IO error 73 (A connection with a remote socket was reset by that socket.) on X server "localhost:0.0"after 498 requests (469 known processed) with 4267 events remaining
Similar issue mention at below note.Please review:
What Happens When an NMS User Kills Their Exceed onDemand or Exceed Session Via Windows Task Manager [ID 1072528.1]
Regard
Helios

Why is internet so painfully slow on my new Macbook Pro Retina?

Why is internet so painfully slow on my new Macbook Pro Retina?

Symptom: The Wi-Fi network seems slow
Troubleshooting Wi-Fi issues

How to control tcp connection with java tcp socket programing ??

Hi,
I am connecting a server as using java socket programming.
When server close the connection (socket object) as using close() method ,
I can not detect this and My program continue sending data as if there is a connection with server.
How to catch the closing connection ( socket ) with java socket programming.
My Client program is as following :
import java.io.PrintWriter;
import java.net.Socket;
public class client
public client()
   * @param args
public static void main(String[] args)
    Socket socket=null;
    PrintWriter pw=null;
    try
                      socket = new Socket("localhost",5555);
                      pw = new PrintWriter(socket.getOutputStream(),true);
                      int i=0;
                      while (true)
                        i++;
                        pw.println(i+". message is being send.");
                        Thread.sleep(5000);
    } catch (Exception ex)
                      ex.printStackTrace();
    } finally
                      try
                        if(pw!=null)pw.close();
                        if(socket!=null)socket.close();
                      } catch (Exception ex)
                        ex.printStackTrace();
                      } finally
}

I changed the code as following. But I couldn't catch the EOFException when I read from the socket. How can I catch this exception ?
import java.io.BufferedReader;
import java.io.EOFException;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.PrintWriter;
import java.net.Socket;
import java.net.UnknownHostException;
public class client
public client()
   * @param args
public static void main(String[] args)
    Socket socket=null;
    PrintWriter pw=null;
    BufferedReader bufIn=null;
    InputStreamReader inRead=null;
    InputStream in=null;
    try
                      socket = new Socket("localhost",5555);
                      in = socket.getInputStream();
                      inRead = new InputStreamReader(in);
                      bufIn = new BufferedReader(inRead);
                      pw = new PrintWriter(socket.getOutputStream(),true);
                      int i=0;
                      while (true)
                        i++;
                        try
                          bufIn.readLine();
                          pw.println(i+". message is being send.");
                          System.out.println(i+". message has been send");
                        } catch (Exception ex2)
                          System.out.println(ex2.toString());
                          System.out.println(i+". message could not be send");
                        } finally
                        Thread.sleep(5000);
    } catch (EOFException ex)
                      ex.printStackTrace();
    } catch (InterruptedException ex)
                      ex.printStackTrace();
    } catch (IOException ex)
                      ex.printStackTrace();
    } finally
                      try
                        if(pw!=null)pw.close();
                        if(socket!=null)socket.close();
                      } catch (Exception ex)
                        ex.printStackTrace();
                      } finally
}

DO I need to connect to my Master Socket?

In short, my question is ... does my home hub have to be connected to the master phone socket?
I am looking to take on BT phone, broadband and TV package but my master socket is in my kitchen. The house is 10 years old and from that master socket the builder installed other BT phone points throughout the house. Can I have the home hub connected to my livingroom socket which is obviously not the master socket but a "spur" from the master socket?
I don't fancy having the hub in my kitchen.
Thanks.

You can have the master socket moved - so Openreach engineer will do some "messing about" with your cabling and make a different socket your master.
Or you can have a data cable run from the existing master socket to a more suitable location - this is a handy option if you're unsure of the quality of your internal wiring.

Loosing and slow connection with Airport Extreme

Hi. Before I start, I hope there are some who suffer the same problem as me.
First of all, I have a problem with my MacBook and Airport Extreme. The Network I created with Airport is getting really slow or unconnected with my MacBook. So I tried to reset both the modem and Airport. Actually, it kinda works, however this problem occurs later.
First time I thought it was the problem with uTorrent that I didn't use uTorrent anymore but it still has a problem.
Because of this **** problem, I have to reset my modem and Airport Extreme several times a day and it really stressed me out. Embarrasingly, I don't even know what the problem is. is ti the problem with My macBook? AirPort Extreme? Modem? No idea..
I need a help...
P.S. Modem seems working fine since the ethernet is working fine. maybe problem of Airport or MacBook. I think I should go to the Genius Bar but I am afraid that 'Genius' is going to just check once and say 'It has no problem.'

zdawg77 wrote:
I too am having very slow connection speed issues with two of my white macbooks, both running 10.6.2, same airport extreme wireless adapter (built in). The strange thing is, these two macbooks came in a macbook 5-pack, and the 3 other laptops all have excellent speed. Nothing different has been done with these 2 laptops - all were updated (albeit the 2 were much slower to download the update), with nothing new installed otherwise...
There were some Macbooks that had an issue with the screws holding their internal AirPort cards in place loosening, resulting in noise and lower signal levels from the antennas.
You may want to try taking one of the affected Macbooks to a local Apple Store and see if you experience the same issues on their in-store network.

Cant connect with new modem

Im currently using the Versalink 327W modem and it works fine but it disconnects randomly lately. I tried replacing the ethernet cable but it only recognizes the one I was using for some reason. I decided to purchase the Westell 6100 on Ebay but I cant connect. When I try opening internet explorer I get a log in page asking me to enter my isp email adress and phone number.
I also tried using the GT704WG modem but I cant connect to it either. All lights are fine except for the Internet light which turns Red. Is there a reason I cant connect with a new modem, when my old modem works fine?

Try this.

Very slow connection with db2 ver 9.1 client on win2000

I have been having difficulty in diagnosing why when after installing db2 9.1 fp5 client on our wind2000 box which has Crystal Embedded 10 RAS ( service pack 6 ) running, the reports that i am invoking using the Java SDK ( we have an online J2ee web application ) are very slow. I have narrowed the problem area down to where the java sdk is trying to set the table location.
Using the db2 7.1 client since 2005, we have not had this issue. We must upgrade to ver 9.1 db2 since this is being done at an enterprise level. I upgraded our test server to 9.1 and noticed this slowness. With the 7.1 db2 client and the same RAS server, the reports take about 2 or 3 seconds but with the 9.1 client the reports take about 40+ seconds each and this is always as the setTableLocation method. Once is goes through this, the rest runs fine.
I have tested this with a local db2 datbase on windows, a remote db2 database 3000 miles away ( same as with what the 71 client runs against) and it is consistently the same response time.
I did notice that if I ran my java online on the same server as the RAS server, the response time is great. This only seems to be happenning when the java app is not on the same server as the RAS server.
I also have a java stub that does not run in a web container. in this case, with the same code and the same databases, whether i am local or remote from the crystal server, the response time is 40+ seconds to connect.
The .rpt files are developed via Crystal Reports 10 and we develop on a local database and we modify the database credentials throught the SDK as we deploy upto production. I have also tried this with the same database we developed with and the same 40+ seconds connect time.
All of these scenarios work fine with the 7.1 client.
so it seems there is some connection issue with the 9.1 client only.
Need help urgently.

I have exactly the same issue.

Very slow connection with WRT54GS.

It appeared out of nowhere 2 days ago... slow connection for websites, very high latency for online games to a point where it's unplayable... i tried to reset my router, change channel(i'm usually at channel 6), moving the antennas... nothing. when i reset, the speed is fine for a few minutes, but after a while it's back to slow connection. My router isn't even 1 year old yet and it's already broken? I can't believe that, there must be some solution. Anyone can help please?

The latest firmware is 1.02.0 if you have wrt54gs v6 & V5 if yout got v7 the latest firmware is 7.50.0
First step you need to check is your direct connection from the modem.
1. hardwire your computer straight to the modem using a cat 5 ethernet cable, if your download speed and your internet connection is slow, the problem is with the modem or with your ISP so you need to call your ISP and double check your connection.
If your speed if fine straight to the modem then its with the router.
2.Hardwire your computer straight to the router if your speed is fine when its hardwired through the router, then the problem is with your wireless card or the wireless settings of the router.
In US the standard channel is 11,6 and 1. So play around with the channel. If its still doesnt work then access the setup page of your router click on the WIRELESS tab click on ADVANCE WIRELESS SETTINGS sub tab. set beacon interval to 50, RTS and Fragmentation Threshold to 2304.
After that turn off the modem the router and your computer for 1min. After a minute turn on the modem first after lights of your modem are steady, turn on the router and lastly turn on your computer, check your connection if its fine then its fixed if not call linksys tech support.
I hope this would help. Good Luck!

Itunes slow connection with internet

HELP please someone!
I recently purchased an iphone 4 and so had to get itunes!
I never had the need for it before but I'm quite impressed with it, sorts my music well and works quicker than I thought it would on Windows.
There is 1 issue though, the connection with the internet seem terrible!
I can't stream the 30sec clips of songs in the itunes store! If I download a song it takes at least half an hour! =(
My connection works fine for everything else, normally around 3Mb/sec download speed, often more though! So don't have any issues with anything else!
If I download a song from another source, often takes a matter of a few mins, if not seconds. But itunes seems so slow on the internet!
Really quick to use, just slow as **** on the net!
Any solutions you can suggest?
I've got a Comodo firewall and Mcafee anti-virus and I've added itunes to their safe lists! I can't see what's slowing it up!
HELP PLEASE!
Thanks in advance folks!

How about the built-in Windows firewall - is that also active?
As a test if this was my PC, I'd turn off all firewalls and security to see if it made any difference. You can always turn it back on after the test.
Also I'd try closing itunes in the main account, logging into the windows guest account and see if it is slow there, too.

Slow connection with wireless, normal when wired

I've looked at the previous posts regarding this problem but I don't know how to do any of the recommended procedures. I can connect to the internet wirelessly with no problem but my wireless connection has become very slow all of a sudden (speakeasy speed test is 150-300 kbps). If I connect with a cable instead (wired connection) I get my great Comcast digital cable download speed on Speakeasy which is 15-16 Mbps! Previous posts mention looking at what the "RWIN" is set at and changing it but I'm not comfortable messing around with such basic Windows XP settings when I don't know how to reset back to the default if it doesn't work. Is there any patch from Linksys for fixing this or another easy way to fix it? Thanks! Kenshu

First thing is download firmware from www.linksys.com/download, and update it to latest version. Now follow this from a wired computer : Open setup page of router by typing http://192.168.1.1 in browser's address bar, and typing password as "admin" and no user name. Here enable MTU and set size to 1350. Go to security tab, and disable block anonymous internet requests. Change channel to 11. Go to advanced wireless settings and here change beacon interval to 50, fragmentation threshold to 2306, and RTS threshold to 2307, DTIM to 2. Now reboot modem and router.

Slow connection with build in WiFi card

I have a wanadoo family adsl internet 20 mbit connection with a live box. The live box is also a wireless router.
When i connect to the livebox wiht my toshiba mx40-231 the connection is very slow. The connection is constantly switching between 1mbps and 54 mbps and speeds between.This is also the problem. One moment a internet page is send in 1/10 of a seccond and 1 minute later a page is loading in 20 secconds! the strang thing is that the signal strength is constant high!
With the live box i got also a USB wireless stick. when i use this stick i get a constant 54 mbps very very fast connection.
It seems to me the build in wireless card is the problem. I have already the latest wireless driver and tried a few channels on the router.
Anyone got a idea to solve this problem so i can throw this wireless stick away :-) Very clumpsy thing this wireless stich on such a beautifull laptop!

Hi
If you check wireless board you will find many topics about this theme. It is known that Intel wireless card 2200 B/G make troubles and connection is not constant. We can just speculate why this happen but the fact is that this card has problems with different routers.
For example: Satellite M40 has the same card and work fantastic with Netgear router. Even with Belkin it works well with full speed.
I recommend you to install latest Intel driver
Good luck

Slow connection with WRT160Nv2 model router

someone help please...I am having slow to intermittent connection when router is hooked up...when hooked directly to modem speed and connection is fine..no problems when changing websites or pages...but with router hooked up, I sometimes get a very slow connection or the computer doesn't detect internet connection & goes into the diagnose connection program...which somtimes doesn't detect any connection issue when run and the computer connects to internet then or tell me to power cycle modem and router then try to connect which works...and the connection will be good for a bit then does this all over again...very frustrating...is their a setting in the router or what do I need to do to fix this issue?

Check this link to upgade or reflash the router's firmware.

Painfully slow connection with new master socket

Similar Messages

Maybe you are looking for