Paint brush does not paint where I am pointing.
I am using the new snow lepord 10.6 and CS4. When I go to paint, I place the circle and click but it starts painting about 3/8" lower that where I am pointing, any ideas?
Al
This has nothing to do with SL.
You created a new doc in full screen mode. cycle through full screen mode using the F key. everything will be back to normal.
Similar Messages
-
PHOTOSHOP C6 OIL PAINT FILTER DOES NOT WORKING
PHOTOSHOP C6 OIL PAINT FILTER DOES NOT WORKING
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2095 MHz
Built-in memory: 3003 MB
Free memory: 1578 MB
Memory available to Photoshop: 1666 MB
Memory used by Photoshop: 100 %
Image tile size: 128K
Image cache levels: 4
The GPU Sniffer crashed on 9/7/2014 at 11:15:55 AM
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Mobile Intel(R) 4 Series Express Chipset Family v2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 768, right: 1366
Video Card Number: 2
Video Card: Mobile Intel(R) 4 Series Express Chipset Family v2
OpenCL Unavailable
Driver Version: 8.15.10.2869
Driver Date: 20121004000000.000000-000
Video Card Driver: igdumdx32.dll,igd10umd32.dll
Video Mode:
Video Card Caption: Mobile Intel(R) 4 Series Express Chipset Family v2
Video Card Memory: 1310 MB
Video Rect Texture Size: 4096
Video Card Number: 1
Video Card: Mobile Intel(R) 4 Series Express Chipset Family v2
OpenCL Unavailable
Driver Version: 8.15.10.2869
Driver Date: 20121004000000.000000-000
Video Card Driver: igdumdx32.dll,igd10umd32.dll
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Mobile Intel(R) 4 Series Express Chipset Family v2
Video Card Memory: 1310 MB
Video Rect Texture Size: 4096
Serial number: 92628701192123445467
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
Temporary file path: C:\Users\ShAmRy\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 80.1G, 40.6G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/06/26-12:17:19 4.0.95 66.510504
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Collada 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Picture Package Filter 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Pinch 13.0
Pixar 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0.1
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
Wind 13.0
Wireless Bitmap 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEI am getting the same error, also when starting CS6 I receive a message that my graphic device driver is not officially supported. I have updated the drivers and have never had any issues with any other programs. It appears to be a bug in the program.
-
Hello I have only just recently purchased adobe captivate 7.
I am currently recording some footage in Photoshop and when ever I change the photoshop's brush size it does not correctly record it in Captivate but rather a giant pixelated version of it. or the brush does not match the size of the brush it is painting.
It looks like something like this, http://imgur.com/a/Ko6Wg
I was wondering if it is possible to record the cursor as it displays on my screen.
below you can clearly see it is recording the brush size at the wrong size to what is been drawn. its kinda random in how it does it.
Thanks ahead for anyone who has a soultion.Hi! I have the same problem and I was wondering if you ever figured how to fix it.
-
If I drag and drop an address from address book to the desktop, the address file does not go where my mouse is positioned. It winds up somewhere in the middle of my screen. Any way to have the address file land and stay where my mouse pointer is?
You have to assign the favicon yourself to the desktop shortcut (right-click the shortcut: Properties) after you have dragged the link to the desktop.
You can usually find the favicon in Tools >Page Info > Media and save the icon there.
Otherwise use the main domain of the website and add favicon.ico (e.g. mozilla.com/favicon.ico ) to display the favicon in a tab and save that image to a folder. -
Report painter report does not exist after applying support pack
Hi,
I have created report with the help of report painter for FI.
Also created transaction code for the same.
After applying the support pack, while testing I got the error that
program in the transaction code does not exists.
How to search that program and where or I need to create the same program again?
Thanx in advance.
-UmeshThe reason could be having (1) invalid characteristics value or (2) have not properly defined the General Data Section, most likely (1) in this case.
Either way, go to t-code GRR2 to change the report.
In the report row or column, is there an Element (the labels in red color) that does not make sense?
It could still have the correct label names, but double-click and go into "Record Types (from your error message)". Be sure to have the correctly define values attached to each Characteristics.
If all above seems okay, try (From top bar, select) Edit --> General Data Section. Think of this section as the "header data" of the report.
Good luck
AY -
If I use "Windows 7 Basic" theme on my laptop (Fujitsu Lifebook A532), the Firefox window is not painted.
I see only the border of the window, the content not. As soon as I switch back to the "Windows 7" theme,
it works again.
It could be related to the graphics driver (from Intel) of my new laptop.
Before I had a desktop computer, and did not have this problem.
Update: the problem occurs only if I use my port replicator (Fujitsu USB Port Replicator PR07).
If I unplug the replicator, and use only the monitor of my laptop, everything is fine.''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem. -
Paint bucket tool not painting color on canvas
Ok - I'm new to photoshop (I just got cs4) and can't seem to get the paint bucket tool to paint the background. I've started out with a new canvas, selected paint bucket and color from color menu on right side. Foreground is selected and the paint bucket tool is showing on my cursor - when I click on it over my canvas I expected it to change to the color I selected and it does nothing. Help??
I am having the same problem and have checked the mode. Normal. Still not working- I have tried eve
rything includig unlocking the layer- checking the opacity and tolerance.
using it with other photos and still nothing. -
Local Adjustment Brush does not work in Windows 7, 64-bit
All other tools and functions work OK. My issue is just with the Adjustment Brush; The Adjustment Panel opens when the brush is selected and the brush moves, but none of the adjustments are applied to the image. The problem is clearly related to the new operating system. This was just confirmed, by removing the hard drive with the Windows 7, 64-bit OS, and inserting an old hard drive with Windows Vista, 32-bit installed. The adjustment brush works fine with the old OS and the same version of PS.
My normal monitor resolution is 1920 x 1200 with a DPI of 151; however, this DPI is not compatible with PS, so I reset it to 149 evey time I use PS. Lower screen resolutions and DPI settings don't resolve the problem. I mention this only because of a previous cursor problem that was resolved by changing the DPI.
I'm using CS4 with Camera Raw version 5.6. Version 5.5 also does not work.
Can anyone offer suggestions?Problem solved. One of the recent upgrades to Camera Raw reset the flow rate to zero, which I did not notice until after posting the message.
Sorry for the error. -
1. I go to Firefox
2. I go to hotmail
3. I sign in BUT
4. Firefox will not let me sign in shows '''sign in''' at top left hand corner only& will not go any futher therefore section where I normally sign in & put password does not appear
5. Tried all day/nightClear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
IPod does not continue where it was pause
Hi all
Does anyone know why when I pause a song, and if I go and do something else like surfing the web or if my phone gets lock, when I get back to iPod, it does not let me continue the song where I left off. It returns to the iPod main screen
Is there anyway to always return to where I pause the song?
Thanksforever_be wrote:
Hi all
Does anyone know why when I pause a song, and if I go and do something else like surfing the web or if my phone gets lock, when I get back to iPod, it does not let me continue the song where I left off. It returns to the iPod main screen
When you browse the web, use native apps, do they crash at all?
There is a discussion in another thread (http://discussions.apple.com/thread.jspa?threadID=1534241) that seems to have correlated play list changes (play count, date last played, ratings, etc.) being lost due to other application crashes.
Let's gather a bit more data and see if that is the cause, and if so, if we can get enough information to Apple to have them fix it. (I have not tried the 2.0.2 software yet, so I don't know if that does fix anything.)
~d -
OSD: prestaged image does not distribute to remote distribution point
Hi,
We have an SCCM 2012 with 2 distribution points: a virtual (the sccm server) and a physical (a pure distribution point). Once and a while we have issues with deploying packages to the physical dp but clearing it and redistirbuting solves the issue.
Now we have a big OS image (15 GB) which does not want to deploy to the physical distribution point at all.
The status stays "in progress" since this morning 11 AM (+/- 8 hours ago). Other packages distribute also slowly but fine.
Distmgr.log shows only logs from end of March this year and then stopped logging anything so I don't have a clue what is going wrong.
Please advise.
J.
Jan HoedtHi,
Please go to the properties of the OS image, make sure "Manually copy this content to the distribution point" on the "Distribution Settings" tab is checked.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
When I use the healing brush, I see the white paint, but when I click and let go, nothing happens. I am on a Mac.
the tool appears in some parts of the image, in other parts it is a little hand, or a little microscope.
The tool should be the spot tool no matter were you are at on the image. The hand and the magnifying glass should only appear on the image during use of the spot tool when you hold the space bar down so you can zoom in and out and move the zoomed image around. I have seen comments of this problem of the cursor only being correct on a part of the image but I don't know what the solution is. Sorry!! -
LR 2 Healing Brush Does Not Work?
I see no difference when using the clone brush and the heal brush in LR2. The heal brush sets a clone source just like the clone brush. I was watching Julieanne Kost's tutorial on the LR2 Develop module and when she uses the heal brush, it appears to work more like the healing brush in PS (no source is set).
I am wondering if this is a bug in LR2 or whether I am doing something wrong or I just don't understand what the heal brush is suppose to do. I am running LR2 under Windows Vista.
Thanks for your help
KenThe two brushes work almost exactly the same, except one has a hard edge and the other a soft edge, and one is a clone while the other acts like a heal (matching tone in the area). So both need a source. However, both can auto-select that source.
-
Image does not appear where it was placed
I have inserted an image to appear in the body tag (i.e. it should be within the cream colored section. It looks great in DreamWeaver Design and in Live Modes. But when I upload to the server it is placed in the left tag. What am I doing wrong?
I did validate the page - no obvious issues.
http://02cada7.netsolhost.com/Stasik_Family_Website/index.html
Thanks in advance for the help!Hans-G dzień dobry
Thanks Hans for taking the time to look things over and for the suggestions. The page that you were looking at was filled with errors - I could not validate the page. Murray suggested that I stay away from AP Divs/Layers until I get more comfortable with html and css. So I've redone the entire page.....I still have more work to do, but you can see the improvements at the following link:
http://02cada7.netsolhost.com/Stasik_Family_Website/index.html
I haven't entered in the text yet - but should be able to do that later today. I am hoping the special characters work. BTW is there a trick to getting the special characters? I am simply copying and pasting from my existing site (I used free software from my isp a few years back). I tried typing the paragraph in word inserting special characters and then cutting and pasting into DW....but they all disappeared. Yet another thing for me to figure out....but I am enjoying the learning experience. -
Equals does not work where it should......
This runs in a while next from mysql DB, gets 5 rows back.
If a real date is in the field I want to print out the date in the else.
otherwise I want to display nothing if the date field in MysQL DB has 0000-00-00 inside (default value).
if (rs.getString(4).equals("0000-00-00")) {
out.println("0000-00-00");
} else {
out.println("real date");
Why does this not work???Hi
Have you checked that the value coming from database is 0000-00-00 only for the results?
If correct,
Do the following :
Put the rs.getString(4) value into a string. now compare the string. using the code
String strDate = rs.getString(4);
if (strDate.equalsIgnoreCase("0000-00-00")) {
out.println("0000-00-00");
else {
out.println("real date");
Try it
Thanks
Swaraj
Maybe you are looking for
-
Error while executing query ORA-00932
Hi I have the following query and its giving error please resolve..... SELECT DISTINCT acthed,rcptno,depdate,matdate,depamt,intrate,intaccd,intpaid,intpble,paytfreq,instalamt,autrenfg, curbalnc,curbdrcr,clrbalnc,clrbdrcr,acstatus,lnachd,lnacno,siflag
-
How to convert MIBs to snmpwalk output?
Hi, I need to develop a monitoring module, but have no access to the actual device I need to develop for. If I had the device's snmpwalk output - I could simulate the device (e.g., with snmposter) and start the development. Is there a way to convert
-
JNDI lookup of stand alone Entity Bean?
Hi, I am attempting to lookup an Entity EJB from within a web app that was deployed as a separate EJB Module. (As far as I understand, multiple web applications should be able to reference EJB's that are deployed independantly within their own EJB mo
-
How to install Portal Examples in Weblogic Portal 10.3.5
I downloaded installation file portal103_win32.exe from Oracle site which is for Weblogic Portal 10.3.5. During the installation process I could not find anywhere I can choose to install Portal Examples. Did I miss anything when I did the installatio
-
Hi, DP PDS is created. I want to fetch components list from this DP BOM (PDS). I have tried BAPI_PDSSRVAPS_GETLIST. But it is giving only SNP and PPDS PDS in the output. Is there any other BAPI to fetch DP PDS data ? Regards, RS