Paint brush tool doesn't work with my Wacom tablet

My new pen tablet works well except when I try to use the paint brush tool. I was using NIK Color effects pro plug in and when I select the paint brush mode it didn't work. So I just tied the paint brush tool without going thru NIK and it still didn't work with the pen tablet. There must be something I haven't set correctly but can't figure it out.
Other tools work just fine such as the patch tool, etc. Any ideas?

try reseting the paint brush and download the newest driver from Wacom

Similar Messages

  • Photoshope Elements when selecting an action, the paint brush tool doesn't work and system keeps freezing, then catching up every 30-45 seconds

    I have been having this problem with elements ever since the last OS upgrade, but it wasn't all the time and it wasn't very bad. Now, I have upgraded my macbook again, and I cannot even edit a photo!! I open the photo, choose an action, say "smooth skin", then choose the paint brush, I start to "paint" over their face and it won't paint a line, I have to keep clicking it, click - it paints, move brush, click again - it paints. Plus, every time I choose a tool or an action, it freezes for about 10 seconds, then catches up to what I am doing, 30 seconds later, it freezes again. HELP!! I have 8 sessions to finish editing by this weekend!! I just want to cry!!

    Try deleting the prefs and the saved application state:
    A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

  • In photoshop CS5, Brush tool doesn't work on an adjustment layer

    In photoshop CS5, Brush tool doesn't work on an adjustment layer

    I Created an adjustment (Curves) layer and did the curves adjustment.  Then I did an Edit Fill (Normal Mode, 100% Opacity and Use: Black).
    I then try to use the brush tool, but it doesn't work.  I've done this hundreds of times before and suddenly it's not working.  Rebooted the system, but that didn't help.
    I know how to do a screen shot, but it doesn't paste onto this screen.  How do I get that to you?
    thanks for your help

  • CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

    CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

    At one time tool  recording was not possible and if you install Adobe Scriptlistener Plug-in Adobe will disable tool recording its never an option.
    I use and record actions all the time and was looking forward to tool recording when Adobe announced it.  However I found what they delivered was  of very limited value because of the restrictions. I do not care that Adobe disables tool recording on my machine.
    The amount of data that gets reordered seems also vary between machines.  I found that Action recorded on fast machine are not usable on slow machine.  Fast machine recorder too much data.
    Documents you use such action on must also have the same size and resolution as the document you recorded the action on. Quite a restriction.
    You problem may also be foxed in CC 2014 sett here Photoshop CS6 - Recording the clone tool in an action gives incorrect results on replay.

  • Brush Tool is not working with Layer Mask

    Working with Windows platform, using Photoshop CS4, Brush Tool is not working with Layer Mask, how can I resolve this challenge?

    Also, do you have any Selections active - maybe hidden?
    When you have your Layer Mask's Channel active, do your Colors change to black and white?
    Good luck,
    Hunt

  • The DB tools doesn't work with Microsoft SQL

    I am tring to write series of waveforms to a database. The DB tools doesn't work with Microsoft SQL, but when i replace the SQL with Access, it works fine. I have to use SQL in the application.
    Any advice pls?
    longing for your reply.
    Attachments:
    test.vi ‏47 KB

    Right off hand I would say the problem is that you are connecting through ODBC. Try the native SQL Server driver, your connect string should define the provider as "SQLOLEDB.1".
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Brush tool doesn't work

    I have just downloaded Photoshop Touch to my Samsung Galaxy Tab 10.1 which is running Android 4.0.4. The brush tool doesn't seem to work. I was wondering if this software is supported on this tablet.

    Hi. I'm sorry to hear that you have problems using the brush tool. Unfortunately I'm not able to reproduce – see my attached screenshot.
    When you compare the attached screenshot with the result on your device what difference are you seeing?
    Guido
    cid:262493F6-3657-4A44-9C4B-B38FD6E8C0D9

  • Extractions, refine edge, using the brush tool doesn't work on iMac but does on MacBookPro

    When in the refine edge interface the brush tool will not work on my iMac but will on the MacBookPro. I haven't reloaded the program yet as I don't want to loose my plugins. Will they stay in tacked? Does anyone know how to fix this? Frustrated that Adobe won't help because I haven't the latest and greatest!!

    After reading support articles I found and an answer in the iTunes Support pages.
    How to recreate your iTunes Library
    http://docs.info.apple.com/article.html?artnum=93313
    Only took a few minutes.
    iMac 700 Ghz G4   Mac OS X (10.3.9)  
    iMac 700 Ghz G4   Mac OS X (10.3.9)  

  • Gradient tool doesn't work with gradients on strokes?!

    Okay, so one of the new flagship features of Illustrator CS6 is gradients on strokes, but you can't use the Gradient Tool with them? I just get a crosshairs pointer with a "no" sign next to it. What's up with that?? I can see why this wouldn't work with shapeburst mode, but linear and even angular gradients (to set the center point) should be no problem.
    In addition to this, here is another bug I discovered:
    In earlier versions of Illustrator, you were allowed to use the Gradient Tool to adjust the direction of a shape's gradient even when the shape's stroke was in the foreground. Now that Illustrator can apply gradients to strokes, it is understandable that, if a shape has a transparent stroke, Illustrator will prevent you from using the Gradient Tool on the shape if the stroke is in the foreground.
    But the opposite should also be true: if you have a shape with a gradient stroke and a transparent fill, Illustrator should prevent you from using the Gradient Tool if the fill is in the foreground. But it doesn't. Illustrator will happily respond to the new gradient direction, but the gradient of the stroke will not change, and the fill stays transparent.

    Adobe tends to introduce half a feature, then abandon it and never develop it further.
    Or charge for the fix in CS7!
    Couldn't have said it better myself. I get so sick of half-baked "glorious new features" in this program that--as you two state--either never get fleshed out, or require hundreds of dollars spent to get something that feels finished years later--and then start the whole cycle all over again on something else.
    I haven't even been able to order CS6 yet, because Adobe's "upgrade" policy is as convoluted as Illustrator itself. First mistake was buying into the Master Collection collection when it was first offered (something I've increasingly regretted since).
    Like doubtless thousands of others, I did not upgrade to the much-ado-about-nothing half-baked CS5.5 middle version, because it offered next to nothing (and absolutely nothing in regards to Illustrator). So Master Collection CS5 owners are penalized for this a niggling $25 over and above what the same "upgrade" costs those who bought the CS5.5 non-version--but have to jump through the ridiculous, unnecessary hoop of first "upgrading" to the already defunct CS5.5, and then wait for permission from Adobe to "upgrade" from that to CS6.--AND you have to do all this before a couple-week's deadline.
    So I'm sitting here with an utterly useless CS5.5 DVD, which I am dreading to install. I have absolutely no use at all for this version. But I have to install it (and you know how that can go) anyway, because Adobe says you can't install the CS6 upgrade version without having CS5.5 installed. This is an utterly stupid practice that NEEDS TO STOP. It is no small burden to run Adobe's bloated installers on a large bundle package like this. Having to do it twice for my $600 "upgrade" to CS6--just to get AI to run as a 64-bit application--just adds insult to injury.
    All this stupid tedium just because Adobe couldn't bring itself to allow the regular upgrade purchase to apply to a mere one full-version back!
    And, of course, the also-stupid disparity between Acrobat and the CS bundles continues. To stay current with with Acrobat, you have to "upgrade" to new versions which are released midway between the CS versions. So much for the "all inclusiveness" of the so-called Master Collection.
    Each release has two or three half-baked "new" features which, in practice, simply do not justify the inflated upgrade pricing. Rather than being excited about new functionality, I grit my teeth each time this happens.
    Meanwhile, Corel's no-nonsense upgrade to its CorelDRAW Graphics Suite X6 (also 64-bit) is $200, and is available to users of two full versions back--without a penalty for having skipped a version they didn't find worthwhile, and without a must-do-it-now time limit.
    And of course Illustrator's text handling remains attrocious. It still can't do ordinary brain-dead simple live shape primitives. It's snaps are pathetic. It has no dimension tools, connector lines, callouts. In other words, the decades-old long list of missing ordinary basic functionality remains. And we pay hundreds of dollars for yet another re-do of its never-get-it-right window dressing.
    What a mess! Adobe needs some serious competition.
    JET

  • Greasemonkey koc tools doesn't work with FF5, I want FF4 back so to run my power tools.

    When I updated to FF5 my kingdoms of camelot (koc) greasemonkey tools does not work. The "tools' tab was removed which disabled many attack, search, training features. Many of my friends have the same problem and we are very upset about this. Are you going to fix these problems? Is greasemonkey going to be updated so it works with FF5. We don't like being forced to update something we don't want. So, please provide link so we can go back to FF4 until the problems are fixed. Thank you

    This is an easy fix :) you should just need to edit your firewall rules to allow Firefox. [[Firefox can't load websites but other browsers can]]

  • Paint Brush Tool

    I have Photoshop CS3.  My paint brush tool has stopped working.  I can not find the  "preset picker tool" to reset it.

    start PS first, and while it's starting to open, press CTRL-ALT-SHIFT.  You should see the below warning:
    To instert an image as these, make a screen shot by pressing "Print Screen."  Then open a new document in Photoshop.  Press Ctrl-V to paste the screen shot into the document and save as jpg.  Click on the little camera icon in the forum "Post a new answer" dialog box as shown in the attached image.

  • Elements 11.  Resize image tool doesn't work.  Tried online chat with Adobe  - no help.

    I recently got a new computer (pc) and decided to download Elements 11 instead of the old version that was on my old computer.   I've discovered that the image resizing tool doesn't work, although the other functions seem to be working fine.
    I tried an online chat with Adobe.  Their suggestion was to buy another photo service from them for $10./month !!

    Do you have Resample Image and Constrain Proportions checked?

  • Alt Key Doesn't Work With Tools

    Suddenly the Alt key doesn't work with Clone and other Tools. When it's pressed, it shows a double arrow (black/white)cursor and a selection is not defined.
    I did a forum search and found this
    Q: My Alt key doesn´t work when using the Clone, Lasso, Magnifyer.. Tool.
    A:
    Some programs and utilities takes control of the Alt key when installed.
    GuruNet (Atomica) and FlySwat are two of these applications. Uninstall them and re-claim the Alt-key, and all should be fine.
    ...but these programs are not on my PC. Plus, the Alt key works fine in other programs. I'm using CS.
    I'm desperate to fix this. Any help is greatly appreciated.
    - CJ

    Dear Awe,
    >Crumbs in the board?
    Thank you!!! My first thought on reading your msg was "You gotta be kidding". Then, "well, why not". So I did it and it worked. Amazing. Learn something new every day. In 18+ years of computer use I never had this problem (I've had lots of dirty keyboards, but never this problem). Must have been a big crumb. The only mystery though is why the key worked ok in another program. Anyway, a thousand thanks.
    John, thank you for your reply too. I looked in the Regional Settings but couldn't find anything re keyboard mapping. I'm using XP.
    Best Regards,
    CJ

  • (PSE 11)After installing Mac OS X Yosemite, the brush tool doesn't allow me to "paint."  It just puts a dot there.  Please help.

    After installing Mac OS X Yosemite, the brush tool doesn't allow me to "paint."  It just puts a dot there.  I am using Adobe Photoshop Elements 11.   Please help.

    Please see:
    http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
    Thanks,
    Anwesha

  • Brush tool is not working.

    For some reason, my brush tool randomly stops working, even the preview thumbnail won't show a brush stroke. Also, my eraser has been acting up, first only adding black, then erasing layer and I can't set it to white. I have PS Elements 10.

    For some reason, my brush tool randomly stops working, even the preview thumbnail won't show a brush stroke
    - I think that you have a non-zero fade value in the brush settings dialog box. This causes the brush stroke to fade away after some strokes. Click the brush settings button in the option bar of brush tool and make the fade value as zero.Er
    Also, my eraser has been acting up, first only adding black, then erasing layer and I can't set it to white
    -Eraser tool eraser the color to transparency if you are on a non-background layer. Otherwise if you are on a background layer it paints with the background color. Press shortcut "D" to set the default background color to white and now use eraser tool. It will erase layer if  you are on a non-background layer and it will paint with white if you are on a background layer.
    Please tell if this helps.

Maybe you are looking for

  • SOAP Adapter:  Content Type Issue in WebServices via HTTP

    Hi, I have configured a Receiver SOAP adapter. When i had to test the message i had an HTTP 415 error. i found that the sender SOAP adpater that received this message is not capable of handling Content-Type: Application/XML i.e. which is being transm

  • Static noise in imported songs

    Pretty new at this.  Have been importing personal CD's was going fine.  Recently the songs I import into ITunes have a very annoying scratching/static sound in them.  Does anyone know how to fix this?  Is it my hardware, or an issue in ITunes itself?

  • Excel in pdf

    Excel in pde? in

  • Problem with a design when open in firefox like

    problem with a design when open in firefox like http://3a6aayer.com/Default.aspx

  • MSDAORA,IIS,ORA-12154: TNS:could not resolve service name

    Hi All, I have a Web Service that coded in VS2008, using ORACLE DB(9i). At a time the application working fine and I can access and do everything with database. Some other time database server is down for scheduled maintenance. If I try to run the ap