Painting with pse 9

I have just started to use pse 9 to paint. Usually the curser is in the form of a brush head but occasionally the curser becomes a  "crosshead" how do iget back to the brush head?

Switch off CAPS LOCK

Similar Messages

  • Few problems with PSE 11

    Hi everybody,
    I have a problem with my PS Elements 11. I was working on trial and then decided to buy full version, however few things seems to work different than on my trial and I can't find solution.
    1) When I copy one image to another it makes transparent layer on it altho capacity is set on 100% still. On my trial image copied or cuted to another pic was looking exactly as original and after I could lower transparency by lowering capacity.
    2) When I want to use normal brush and make just one spot, or paint with one line not with a lot of points or other symbols. I thought aerograph function is the reason but it paints with it and normal the same (as many symbols)
    3) When I select part of image with square selection tool it makes a circle with it or rounded field but somehow square selected image is finally copied. It seems it finds some borders on img by itself and changes selected square to it.
    I would be very glad if someone could help me to resolve those issues. I will feel free to post others also if I they will come to my mind.
    thanks!

    Thank you for your information about my problem with PSE 11. I have since tried the programme on 2 different computers and it works fine. Seems like the problem is with my computer although my old PSE 10 works okay. I'd appreciate any ideas about what could be wrong with my computer to cause my photos to break up into various segments which don't join together particularly when I move them into 'before and after horizontal' or '......vertical' and even when zooming them. ( HP Pavilion Elite) Vista Ultimate.
    Regards,
    Stervogel.

  • Printing with PSE 8 for Mac

    Hi,
    hope some of you may give me some help.
    Have tried to print with PSE 8 for Mac, but in the printing options there is none where i can choose the type of paper (ie: glossy, premium glossy....).
    My printer is an Epson Stylus Photo 1400.
    It works fine with iPhoto, here i can choose paper type. And prints come out fine.
    Thanks for any advice,
    dangerly

    My printer is a Canon so not entirely sure if this helps but when I print from PSE 8 I do not get to choose the media type until I have clicked on the print button in the PSE dialog box. I am then presented with the dialog box for my printer where I can set the media type amongs other attributes.
    It is normal for the media type to be the job of the printer driver so perhaps it is the same for your printer.
    Jim Graham

  • How can I use some of the image i am working on to paint with? like if I wanted to give someone an extra eye in the forehead, ow could i then paint their own i in the forehead? I know there is a paint tool for that, i just can't find it ... :/

    How can I use some of the image i am working on to paint with? like if I wanted to give someone an extra eye in the forehead, ow could i then paint their own i in the forehead? I know there is a paint tool for that, i just can't find it ... :/

    It sounds like you are talking about the cloning tool?
    Tool looks like this:
    Then when selected you can change the size of the brush and using Alt (windows) and Command (Mac) to select your region you want to copy then start to create you cloned image.
    Hope this helps?

  • Creation of Library and Report in Report Painter with Z tables.

    HI,
    When I am creating library in report painter with Z table it is giving the following error message 'Table ZCO_SEMI_FIN_VAL is not installed in Report Writer'.
    Can u help me how u install Z table in report painter and create the characteristic and key figure of the Z table in the library.
    Regards,
    Partha B

    Hi Partha Pratim Bhar,
    In order to bring / enable a Z table for you to build a library, you will have to set it at transaction GRCT.
    Here you need to configure - table (Z table) , characteristics and Key figures.
    You can refer any other tables by SAP in GRCT for reference.
    Revert if you require additional help.
    Regards,
    Subin John

  • IPhoto 08 with PSE 4.0

    I recently upgraded to Leopard and then also got iLife 08. I am a digital scrapbooker and use Photoshop Elements 4.0 in connection with iPhoto on my MacBook Pro. My question relates to iPhoto closing when I try to copy a picture into PSE . . . not sure why it closes and getting frustrated. Checked the Adobe site and found a PSE updater but can't install it . . . what's a girl to do?

    AnnaRobyn:
    Welcome to the Apple Discussions. How are you opening the photos with PSE?
    For what it's worth:
    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
    What version of PSE are you running and what happened when you tried to run the Adobe Photoshop Elements Updater application?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Opening an image with PSE 11

    When i try to open an image in PSE 11 from Windows explorer by choosing "right click" - "open with Pse 11" the editor starts but does not open any file.  This was not the case in previous versions of Photshop Elements.  Any idea why this behaviour?  
    ..Bjorn

    Solved.
    After PSE11 installation the image files would open automatically with "Adobe Photoshop Elements 11.exe" and not
    "PhotoshopElementsEdtor.exe"  I changed file association to the correct program and it works fine.
    I have been running PSE sins since version 06 but first time i can reon. having to do this change.
    (Raw files however open correctly even pointing to the  "Adobe Photoshop Elements 11.exe" no change necessary)
    Thanks for Your help

  • Problems with PSE 10 when saving for the web.

    I'm having problems saving for web with PSE 10. I edit in RAW, edit in PSE 10, save as Jpeg, resize and save for the web.  Results are muddled and not sharp (looks cartoonish). Also, there is no metadata when you look at the image properties.  I uninstalled the program and installed again. No change.

    Are you resizing the photo before save for web?
    What settings are you using in the save for web dialog for the jpeg quality?
    If you compress the jpeg too much (low quality settings below 60), that can make your photos look bad.
    And save for the web in pse 10 automatically strips any metadata in order to keep the file sizes smaller.
    Also, the save for web in pse 10 has a bad habit of not remembering your last used settings, so it's good to verify that your actually set to jpeg instead of the default GIF setting.
    Message was edited by: R_Kelly

  • ACR 5.7 not compatible with PSE 6 or 7

    Though the recently released ACR 5.7 works with PSE 8, it is not compatible with PSE 6 or 7.  A number of people (including me) have observed that if you try to open a raw file in 6 or 7 you get:
    Unable to use the Camera Raw plug-in. It is not compatible with this version of Photoshop Elements.
    The accompanying documentation is an inconsistent mess about which versions are supported, variously implying that it works with 6 or later, 7 or later, or just 8:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4685
    This new version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Adobe® Creative Suite® 4, Adobe Photoshop® CS4, Adobe Photoshop Elements 8 and Premiere® Elements 8 software.
    The Camera Raw 5.7 plug-in is not compatible with versions of Photoshop earlier than Photoshop CS4, versions of Photoshop Elements earlier than Photoshop Elements 6.0, or versions of Premiere Elements earlier than 4.0.
    The latest version of the Camera Raw plug-in available for Photoshop Elements 6.0 (Windows) is Camera Raw 5.5.
    This new version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Adobe Creative Suite 4, Photoshop CS4, Photoshop Elements 7.0 or 8 and Premiere Elements 7.0 or 8.
    5. Navigate to the location designated by your version of Photoshop Elements: (Please read directory carefully)
    a. Photoshop Elements 7.0: Program Files\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats
    http://www.adobe.com/special/photoshop/camera_raw/Camera_Raw_5.7_ReadMe.pdf
    This new version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Photoshop CS4, Photoshop Elements 8.0 and Premiere Elements 8.0.
    The Camera Raw 5.7 plug-in is not compatible with versions of Photoshop earlier than Photoshop CS4 or versions of Photoshop Elements earlier than Photoshop Elements 7.0 for Windows and Photoshop Elements 6 for Mac.
    Navigate to location designated by your version of Photoshop Elements:
    a. Program Files\Common Files\Adobe\Plug-ins\Elements 8\ File Formats
    b. Program Files\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats

    I agree with John,  there is certainly a mess and confusion
    over the use of ACR 5.7 with PSE 7.  I have tried to upgrade and got various error messages including the version incompatibility one. I did try both the 32 and 64 bit versions since I am running Windows 7 64 bit.  However I have now reached a slightly different opinion since I am still able to open Raw files from my Canon G10 (which previously worked with 5.6) but cannot open my EOS 550D Raw files which suggests a specific code problem rather than a version incompatibility.  Any comments or help Adobe?

  • Problems with PSE 11 and Filter Forge

    Is anyone else having problems launching Filter Forge from PSE 11?  It used to work, but now freezes after a very partial load.  FF still works with PSE 9, and yes, I have the latest version of PSE 11 installed on a 64-bit version of Win 7 Pro.

    I did not use the trial version of PSE 7 but installed directly from a purchased CD.  The "registration" option under the help menu of the editor is not highlighted and there is no option to deactivate the serial number under help in either the editor or the organizer.  Therefore I must assume that Ankush is correct that there is nothing that I need to do prior to uninstalling PSE 7.
    Also, am I correct to assume that since this original post was marked as a discussion and not a question, I do not need to close it in any way?
    Thanks to all who have responded and offered assistance.

  • Can you create report using report painter with Tcodes:FAGLL03,FCHN

    Hi Experts,
    1.I want to create report using report painter by using tcodes FAGLL03,FCHN.Can i create with report painter?
    2.i never used report painter can anyone provide report painter pdf for ecc6.0
    3.can any oneguide me how to develop report in report painter by using this tcodes.
    4.If not possible can i do with report writer?
    Regards,
    naresh.
    Moderator: Don't mix report painter with the TCodes wyou mentioned; there is no link between them. Regarding Report Painter - search SDN. Respect the rules and don't cross-post: you asked the same unclear question in several forums!

    cross posted
    Edited by: nareshvarma on Jul 19, 2010 9:11 AM

  • Certificate with PSE type SystemPSE has been invalid for 9 days

    Hi,
    I am seeing the above message in my ERP system transaction SM21 along with Validity of certificate from list with PSE type >SystemPSE< ends in 5 days message.
    I have seen several notes and SDN threads on this and have replaced the PSE etc.  However, when I download a new verify.der file from the Portal, it still shows a valid to date of September 29, 2007.
    How do I change the valid to date to something other than what has already expired?
    Any help is greatly appreciated.
    Regards,
    Rick

    Hi
    check this note 685306
    and also look into this blog 
    Seamless SSO in spite of certificate expiration
    hope this helps you
    Regards
    Krishna.

  • Consistently size employee photos with PSE 9

    I have PSE 9 and would like to use it to consistently size all employee photos for ID badges.  For example, after taking the employee’s picture, it would be uploaded/dragged into PSE and cropped appropriately, then saved at the ideal size.  Overtime, this would involve hundreds of photos so it’s important that all photos be consistently sized for importation to the ID badge application and to use with Outlook email active directory.  Years ago this was accomplished by creating a template in Photoshop, which I do not have. Can this be done with PSE and if so, can someone provide instructions. I’m new to this…  Thanks

    Thank you.  I'm looking more at bringing in the raw image and crop accordingly.  I want each photo when all is said and done to be the same size.  For example, I take photos of a new employee today for ID badge purposes.  I import the raw image into PSE, crop, save as a jpeg, and upload into the ID badge program.  Tomorrow, I take another photo of a new hire employee and repeat the steps.  Next week we get new employees and repeat the process.  I would like to develop a process that would consistently make the cropped employee photos uniform each and every-time.  

  • Unable to open RAW files with Samsung TL350 with PSE 8.0

    I have tried downloading camera raw 6.3 which seems to be the right upgrade, but I have trouble opening it. I even installed the adobe download manager 1.5. I have windows XP with service pack 3 and 1GB RAM,Intel Core (TM)2 CPU [email protected] processor.
    Any suggestions?
    Thank you

    Unfortunately, you can't use 6.3 with PSE 8, only with PSE 9. 6.2 is the last update that's compatible with PSE 8. If that doesn't support your camera, you can try downloading the standalone DNG converter part of the 6.3 update and see if PSE 8 will recognize the DNG files from your camera, or else use the Samsung conversion software and then open the converted file in PSE for further editing.

  • How Do I Free-hand Cut an Object Out of a Pic With PSE 8?

    I want to completely free-hand cut a horse out of one pic and then save it into another pic with a different background. I can't figure out how to do this with PSE 8. It is my first time using this program. The only picture editing program I have used before was Microsoft Picture It (v.7 from 2003 I believe), and it had a cool multi-selection cutout tool that included free-hand cutting. It worked perfectly for my needs, so I'm pretty frusterated that I can't seem to figure out how to do the same thing now that I have PSE 8. Can anyone advise me on this please? I'd sure appreciate the help. Thanks!

    You need to select the horse. Use one of the selection tools. In PEv.8 there is the magic extractor (Image>magic extractor), and also the selection brush, which I find works very well. The lasso tools should also work well for you. Once you have selected the horse, you can copy/paste it to your new background.
    If you post the picture, either here, or at www.pixentral.com (provide the URL so that we can access it), we can provide detailed step-by-step guidance.

Maybe you are looking for