Pair iphone 4S and audio at the same time in 2011 Corolla.

My car bluetooth will only pair my phone OR my music not both.  When I try to pair both I get a message on my phone:  Make sure 'car multi-media' is turned on.  It looks like either the car or the phone's bluetooth cannot find the other.  It just keeps searching.  Is this message for my phone?  Toyota says I need to have the navigation system in my car to be able to pair both at the same time.  I got the feeling they just said this because they couldn't answer my questions.  The dealer thinks I should be able to pair both simultaneously.

If what Toyota told you, then their system is IMO, junk. Works just fine in my Kia without a nav system. Of course, there are many reports of compatibility issues with Toyota and Lexus audio systems and a number of phones. You may just need an update.

Similar Messages

  • How do i start video and audio at the same time in ios

    How do i start video and audio at the same time in ios?
    I have tried a lot of different ways but i cant figure it out?
    I can get the sound and animation (timeline) to start playing.
    There is no problem to start the video and the animation at the same time.
    But i cant get both the video and the audio to start playing when i press a button.
    It works great in OSX and on windows?
    Here is an example:
    // insert code for mouse click here
    // Play an audio track
    sym.$("_1")[0].play();
    // Play a video track
    sym.$("host")[0].play();
    // Play the timeline at a label or specific time. For example:
    // sym.play(500); or sym.play("myLabel");
    sym.play("marker1");

    If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

  • Can't recording  Midi  and Audio at the same time

    I'm in GREAT need of help. I can't record midi and audio at the same time. I'm using an M AUDIO project mix I/O. I know this is VERY basic stuff but I can't seem to get it to work.I can record multiple audio at once. ANd I can record midi but not at the same time. PLEASE help . Is there a setting somewhere I need to change ? Thanks
    Tracy

    Hi!
    Enable all audio tracks (R) you wish to record. Then make sure you select the audio instrument you are using on the left of the arrange page (track list). If you here your input, hold shift, then highlight (gray) the mentioned audio tracks you wish to record on. When R is red, and the proper tracks are grey, you can record. Hope that made sense!

  • How do i delete email from my iPhone,ipad and computer at the same time?

    How do i delete email from my iPhone,ipad and computer at the same time?

    Go to http://support.google.com/mail/bin/answer.py?hl=en&answer=77702. It tells you how to set up gmail on iPhone.  Then go to gmail settings then "accounts and imports" and add your AT&T POP email account  to import mail from AT&T to gmail

  • How to record midi and audio at the same time?

    Hello,
    I have a Roland sh-201 synth and Logic 9. When I use patches from the sh-201, it will record it via audio. What if I wanted to record the audio but also have the midi information as well? How would I be able to accomplish this? My synth is connected via USB which carries both midi and audio. Sorry for my poor english, but any help would be greatly appreciated.
    Thank You.

    Hi
    Logic will record both audio and MIDI at the same time, but you *MUST* have the Software Instrument/MIDI track selected in the Arrange Track List.
    The audio track must be 'Record Ready':
    HTH
    CCT

  • Edit video and audio at the same time

    Is it possible when I remove some of the audio to also remove the same amount of that time from the video?

    Lilybiri,
    We did record both the audio and video at the same time in Captivate 8.
    The question is: how do we edit the audio and video at the same time?
    If I want to cut out 5 seconds of audio can I or will the software cut out that same portion of the video and if so how do we do it?
    Do we need to create a Demo or Software Simulation to be able to take advantage of this tool for cutting both together.
    Your assistance is very much appreciated.
    <http://www.eaglemetal.com/>
    Mark Wyatt Customer Support specialist
    Eagle Metal Products | 12300 Ford Road, Suite 110 | Dallas, TX 75234
    [email protected]<mailto:[email protected]>
    Toll free: 800.521.3245
    Direct Line: 972.350.9898

  • Recording MIDI and Audio at the same time....

    I am having an issue recording a simple piano softsynth along with a guide vocal. Whenever I punch in, the audio punches fine but the MIDI/softsynth track hiccups, causing a lag in sound even though the MIDI info seems to record fine. Also, this does not happen when recording MIDI alone-everything punches in fine. Is there some setting I'm missing somewhere or is Logic not able to do this smoothly? Any help would be greatly appreciated. Thanks.
    Message was edited by: dbboy

    Hi Fred,
    I bring you my wisdom...Yes there is hope.
    What you need to do is set the part you want to bounce into cycle mode. Dont worry, it will not cycle, it just knows now where to start and stop.
    Audio and Midi can be recorded at the same time, as long as the midi is from an AU within the mac and not from an external source.
    Good luck,
    Joe
    There is always hope

  • Bouncing, recording MIDI and Audio at the same time

    This is 2 questions. Thanks.
    1. Each time I go to bounce a song, I have to enter the start and end again. I wish it would just remember form the last bounce. Is there hope?
    2. Can I record an audio track and a MIDI track at the same time?
    thanks,
    fred in San Rafael, CA

    Hi Fred,
    I bring you my wisdom...Yes there is hope.
    What you need to do is set the part you want to bounce into cycle mode. Dont worry, it will not cycle, it just knows now where to start and stop.
    Audio and Midi can be recorded at the same time, as long as the midi is from an AU within the mac and not from an external source.
    Good luck,
    Joe
    There is always hope

  • Recording Video and Audio at the same time

    Hi!
    I just want to know whether there are video recording options within Sountrack? I'd like to record (hopefully funny) videos (via the in-built camera) and add layers of sound immediately afterwards. Is this possible?

    The way I tried doing this yesterday was by starting to record from my isight in iMovie 08 and then recording the audio in garage band at the same time.
    That's a good idea! And will be much more "natural" than a later lip-sync.
    After I finished I exported the audio iMovie and played around with the timing for about 10 minutes until I could sync up the audio to the video of what I was playing.
    I would export the GB project to an audio file and then import the resulting AIFF into iMovie to finish the movie.
    In my experience, syncing shouldn't be so hard - in iMovie, you get a kind of reverb effect if you're 1 or 2 frames off and listen to both audio tracks. This reverb vanishes once you're right on time.
    For easier syncing, it could be helpful to do what they do in movies with a clapboard: Have a visual/optical clue with and impulse character, like clapping your hands, and use that to align video and sound. Fine tune by aligning the two audio tracks.

  • Cannot pair bluetooth keyboard and mouse at the same time

    I cannot seem to use my bluetooth keyboard (offbrand) and microsoft bluetooth mouse at the same time on Mountain Lion.  Whenever I switch over to using the mouse, the keyboard stops working even though under the bluetooth menu it says it is still connected.  I either have to switch off the mouse or turn off and on the keyboard to start typing again. I have tried resetting the PRAM but that didn't make a difference.  I also updated the aluminum keyboard firmware update 1.1 and it doesn't seem to do anything either.  I know it probably isn't interference because they both work flawless on the same machine in a windows bootcamp partition.  Is there anyfix for this?

    Sorry, but after doing some research, it appears you can only use one at a time. 

  • How do i delete sections of video and audio at the same time

    hello, i made a video with sound and overlapping voiceover i want to know how do i delete a section of the video and the voice over without having to resynch everything again?

    In Final Cut Pro X, this is easy. You drag to select all these clips. Then use the Blade Tool.
    However, in iMovie, it is not as straightforward. You can edit the camcorder clip and its audio, but any music tracks, voiceover tracks, etc. will not be edited with it.
    A workaround is to use the SHARE menu to SHARE/EXPORT TO QUICKTIME using Apple Intermediate Codec to retain as much quality as possible. Then import this new movie into an Event. New all the audio is married to the video and you can edit everything together.

  • Tap to play slideshow and audio at the same time?

    I have an image sequence of people dancing that I've turned into a 12 state MSO. You currently tap to play the sequence. I'd also like a 15 sec. clip of some music to accompany it. Is there any way to get the audio to start playing when the user taps to start the slideshow?
    Thanks.

    Thanks Bob, yes...that's what I'm running into as well. I'll continue to experiment as well. For reference I'm attaching the first and last screens that have user actions tied to them. The slideshow plays fine, but again I can't get the audio to start when the user taps that first screen.

  • Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

    Hi all, 
    thanks in advance for your advices.
    I have a problem with my notebook (HP pavilion g6 2305 sl).
    The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
    I tried to install again the latest driver audio, but nothing was changed.
    I tried to use another pair of earphones, but nothing.
    I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
    I read a lot of forum on the web but I'm not able to find a solution for my problem.
    (ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

    Right click on speaker icon, lower right screen.
    Choose playback devices.
    Select "speakers and headphones" as your default.
    Disable "communications headphones".

  • HT201210 could not back up iphone to this computer.  I have bought a new phone iphone 4 and it says the same thing. though I have another iphone 3 that backs up perfectly to this computer every time. why?

    I had 2 iPhone 3G's, one of them screwed up and wouldn't recieve service. Up until then when I backed them up to my computer all was good, then one of them would update and all but a screen would pop up and tell me it couldn't back up to my computer.  Recently I replaced the bad tele with an iPhone 4 and it does the same thing while the other iPhone 3G still backs up fine.......What up!!!  Help please.   Don't wanna lose my info..

    I banged my head on the wall with the same problem for two days.  Tried everything mentioned, and this worked, finally.  The problem is that the backup files are not where you think they are.
    You need to delete the MobilSync backup folder.  I have a Mac.  Went to /Library/Application Support/MobileSync/Backup and deleted the Backup folder. 
    Fixed the problem.  Give it a try and good luck!

  • Recording Audio and Midi at the same time in Logic 7 Express Can it be done

    I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

Maybe you are looking for