Pair Nano with Mercedes--Can It Be Done?

My Mercedes has bluetooth and it works perfectly with my iPhone. I just bought a Nano and it has bluetooth. Can I pair it with my Mercedes to play the music through my system?
When I put my Mercedes in discovery mode, the Nano does not see it nor does the Mercedes see the Nano.
Any help is appreciated.

Are you able to play stereo music through the carkit with the iphone or can you only use it for phone calls? i.e- if the carkit only supports HSP and not A2DP, then it won't work with the Nano.

Similar Messages

HOW TO PAIR IPHONE6 WITH MERCEDES S350

HOW TO PAIR IPHONE6 WITH MERCEDES S350

Try removing the iPhone listing from the vehicle, then remove the vehicle from the phone. Do a reset on the phone, holding the sleep/wake and home button together until you see the Apple logo and then release. After that, put the vehicle back into discovery mode and then turn Bluetooth on for the phone. It should connect. Sometimes when updating iOS on the phone can cause a temporary issue with Bluetooth connections.

Speech recognition with Flash- Can it be done?

is there any way in flash to detect the voice and detect what
user is saying.
eg if user is saying "yes" then run some command and if "no"
then other.

David,
> Flash project can have an interface where
Illustrator/PDF files
> could be opened from within a Flash Projector file
allowing
> users to turn on/off layers of graphics per their needs
and then
> print out the results
Photoshop and Illustrator files are supported for input in
the Flash
authoring tool -- even to the point of turning on/off layers
-- but for
better or worse, Flash Player doesn't support either format
at runtime.
(They're converted to Flash Player-compatible files by the
authoring tool.)
I won't go so far as to say this definitively can't be done
a.viary.com does some amazing Photoshop-like things using
Flash, and recent
ActionScript does allow for manipulation of byte arrays -- so
desktop
control over PSDs and AIs *might* be possible in theory, but
it would be the
sort of custom programming that a only handful of the top
Flash developers
in the world would know how to do.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Pairing iPhone4 with Mercedes S550. iPhone software issue?

Hello. I'm trying to pair my iPhone4 with my '09 Mercedes S550. The two devices can see each other, but when I try to pair them the phone says "VH1 SN 2553 is not supported." Any idea how to fix this?
Thanks.

Hi dphansy,
If you are having an issue with your iPhone being unable to connect to your car stereo, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting car stereo connections
Thanks for using Apple Support Communities.
Best,
Brett L

Pairing Garmin with BT: Can't create connection: Input/output error

I'm learning how to use BT in linux. I have a Garmin and a CE device that has bluetooth capability. Both are in discovery mode.
Running "hcitool cc [macaddr]" to pair the Garmin looks promising, the Garmin receives the, well, transaction (what's this called?), and says the passkey is 1234. However, I press OK on the Garmin, and it shows a second message that the connection failed. Looking at my PC, I see this in the terminal:
Can't create connection: Input/output error
What am I doing wrong?

Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570

Pair nano with bluetooth speaker

Unit: Nano Ipod 7th Generation.
Problem: When I have my Bluetooth activated Nano in my car, all I have to do is choose Bluetooth (rather than Satellite, AM, FM, Disc, etc.) and the car system immediately begins playing the music from the Nano. In short, once I pair the two units (car Bluetooth and Nano Bluetooth) the two work together immediately. HOWEVER, when using an OontZ Angle with my Nano, I have to navigate to the Nano connection (even though I've previously paired the two Bluetooth units) and click on "Connect" on the Nano. I wish to have the Nano and speaker work the same as the Bluetooth system in my car. After jumping through too many hoops ("connection, etc.") the two systems (OontZ and Nano) work great together.
Question: What am I doing wrong? Any suggestions?

It will work. You need to turn off BT on the iPhone then put the speaker in pairing mode. The speaker must also support A2DP.

Using iMac as external display with MBP, can this be done?

I know...
This has been posted before, but I have as of yet not found a straight answer. Mostly peoples recommendation is: "Buy a display".
However, I have an older iMac, 20" and I have a newer MBP 15". The MBP has a faster graphics card, better processor and more RAM. But I still like sitting at the table using my iMac, because the comfort of working is better this way.
Now seeing that I have both, is it possible to connect the two, and use the iMac for a display? Preferably without having to buy a whole lot of expensive cables, applications or do strange hacks risking hurting myself or my computers
Thanks all
Have a nice day

but I have as of yet not found a straight answer.
I think you are getting the straight answer. You need "buy a display" because a display has a video input port. An iMac has a video output port, but NO video input port. Therefore, you cannot use it as an external display, like a regular display.
You could give the iMac a video input using a USB interface device, but the cost of such a device that would provide good quality video into the iMac would cost about the same as (or more than) a low cost LCD display. And it would probably not be ideal in terms of performance.
You could also use this clever program to use a fast network connection and VNC to display the MacBook Pro's second screen on the iMac screen.
http://www.screenrecycler.com/home.html
In your case, the program will create a virtual screen for the MacBook Pro and shares it with the iMac in much the same way as the +screen sharing+ feature. Disadvantages are relatively slow image refresh rate (because the signal is going over the network) and the need to have the iMac turned on and running separately. The speed part will not be that bad in your case, if you use a Cat-5e or better Ethernet cable to connect the two Macs, so that you will have gigabit speed. You can give it a try at no cost to see if it is an acceptable solution (in time-limited demo mode).
I use this program to give my iMac a third display. The +third display+ is an old PC laptop running Linux (Ubuntu).

Nano with windows can't mount ipod

My ipod nano says "use itunes to restore. when I try to use the latest insataller i get an error message "can't mount ipod. windows sees the ipod but itunes doesnt. i tried reload itune ver 6.5 and still no success. any help would be greatly appreciated.

Please read this first
http://docs.info.apple.com/article.html?artnum=93426
If it does not work, it could be the problem of your USB port, please try others

HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out. what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

I can't pair my nano with my 2013 honda accord

When I try to pair my nano with my 2013 Honda Accord, they don't even recognize each other.

As far as I know, that is not supported via Bluetooth.
Barry

I can't pair my nano with my macbook air, it keeps saying pairing failed on the iPod

How do I pair my nano with my macbook air, it keeps saying pairing failed on the nano?

As far as I know, that is not supported via Bluetooth.
Barry

Can no longer charge Nano with the USB cable

My iPod Nano (1st gen) won't charge via the USB cable any more. It will sync if there is enough battery life when I hook it up to the USB cable. However, if I leave it hooked up, it gets drained of all it's battery life. Fortunately I have a wall charger and a car charger and both of them will charge the Nano. It's a lot more convenient for me to charge it via my computer, but that's not possible any more. Is my Nano dying or is it possible the USB cable is damaged? If it's damaged, how can it sync but not charge? Why can I charge with other power sources but not the cable? Unfortunately, I don't have another iPod cable to test if the cable is damaged. If my Nano is dying, can you give me a rough estimate as to how long it will be before it stops charging all together. (I need to prepare my spouse for the upcoming iPod Touch purchase that will appear on credit card.)
Thanks.........Julie

Here's my own trial and error analysis of my problem. I hooked my iPod up to my old G4 PowerBook and tried to charge it from there. It didn't charge but it also didn't lose any more power that I could tell. I then hooked it up to my MacBook's first USB slot. I heard that the first slot has more power than the 2nd slot due to the way the 2 USB ports are configured. Unfortunately, the iPod appeared to have lost some power, i.e. the USB port drained some of the power from the iPod.
I'm guessing I need to take it in to have my USB ports checked out. I prefer to take it to an Apple store with a Genius bar that is 3 hours away instead of to our "local" Apple repair shop that is an hour away. I have Apple Care and I believe my local shop will still charge me for time.
Thanks for the suggestions. Until I find a day when I can take the long drive, I'll just charge my iPod from with a wall charger. I'm grateful the iPod syncs and I have an alternate way to charge.

Can you give me some reasons about why I need to buy an iPod touch 5.Although I have the iPhone ,iPod nano, iPad ,MacBook pro,I think the iPod touch 5 is so attractive that I can't help buying it at once.If I have it,what I can do with it,can you tell me?

can you give me some reasons about why I need to buy an iPod touch 5.Although I have the iPhone ,iPod nano, iPad ,MacBook pro,I think the iPod touch 5 is so attractive that I can't help buying it at once.If I have it,what I can do with it,can you tell me?

All I can say is that I REALLY like my Touch 4th gen because I have all sorts of capabilities in a small form: e-mail, web browsing, news, weather, books, magazines, etc. etc. Plus lots and lots of apps out there, including so many free ones. I use the Cloud a lot so it's great to have everything sync'd to my MacBookPro (e-mail, Evernote, Pocket, etc.)
It would be easier, though, to do some of this, especially magazines, on the iPad mini, but, again, I love the small size of the Touch.
As for the 5th gen instead of the 4th, the fifth has Siri and the 3D feature in maps, which are great. And I'm sure it's a lot faster in iOS 6 than the 4th gen. And cool colors!
Don't know if this helps . . .

Can I sync my ipod nano with my second computer/ netbook while travelling?

Looking for some advice on how to connect my IPod nano with my second computer while travelling. That's what happened: I have my iTunes library on my computer at home and can sync my IPod nano (6 th generation, replaced onyl recently) with that library. While I was travelling and wanted to use my IPod I received an error message asking me to connect the IPod with iTunes in order to recover/restore (sorry, the message apeared in German, so I do not know the exact wording in English) . As I only had my second computer - a small netbook - with me, I downloaded iTunes and connected the iPod - only to receive the message that this Ipod would sync with another computer (sure!) and would I want to sync it with this iTunes library instead now? (Of course not, I did not dare because that library was empty!). So there I was with my computer with iTunes library at home and an iPod stuck in recovery mode and not doing a thing during my vacation. Any suggestions? If I have to take my great big workstation with me to get the iPod running again, I might just as well leave the iPod immobile at home. (;-)

On your home computer connect your Nano, click on the name in iTunes, move right to the Summary tab then tick the box that says Manually Manage Music. You will now have to er, manually drag your music to your iPod, and manually eject it when done, but you will be able to add music from two different computers.

The buttons to my old iPod nano 1st or 2nd gen (I don't remember) do not respond/work. Can this be fixed??

The buttons to my old iPod nano 1st or 2nd gen (I don't remember) do not respond/work. Can this be fixed??

The Sad face icon is usually a very good indication of a hardware malfunction or failure usually with the iPod's Hard Drive, which would also explain the loud clicking noise you are hearing.
I assume you have seen this article yet?
iPod display's a sad iPod icon
If you are up for the challenge, you can also try all of the troubleshooting mentioned described by another forum member Mitch 751.
https://discussions.apple.com/thread/1193481?start=0&tstart=0
B-rock

Pair Nano with Mercedes--Can It Be Done?

Similar Messages

Maybe you are looking for