Pair PS3 Dualshock 3 Sixaxis controller with Macbook Pro

I have read many threads with instructions on how to pair a PS3 Dualshock 3 controller with my Macbook Pro
I have stumbled at the same hurdle every time without success in that no matter what variation of connecting the controller with lights flashing quickly or slowly or not at all, having used a paperclip to reset the controller it never shows up in the Bluetooth preferences box it's just blank.
I've tried two different controllers which work on my PS3 so I don't think its the controllers, I can get my iPhone to show up on the Bluetooth preferences box so the bluetooth is working.
I'm running OS Yosemite on a 2014 Macbook Pro retina - can anyone help?

Im having the same issue as the two above. The controller works with steam games, however is completely unresponsive to third part key mapping software, and it can't be found in the bluetooth system preferences, only under the bluetooth dropdown menu. I have not been asked to pair it, and here are the bluetooth settings showing the current state of my device. Hope this helps, and someone can help me solve the mystery as Ive already but alot of time into researching this cause to no avail.
  Apple Bluetooth Software Version: 4.3.0f10 14890
  Hardware, Features, and Settings:
  Name: Dominique’s MacBook Pro (2)
  Address: B8-8D-12-1F-53-11
  Bluetooth Low Energy Supported: No
  Handoff Supported: No
  Instant Hotspot Supported: No
  Manufacturer: Broadcom
  Transport: USB
  Chipset: 2070B0
  Firmware Version: v42 c847
  Bluetooth Power: On
  Discoverable: On
  Connectable: Yes
  Auto Seek Pointing: On
  Remote wake: On
  Vendor ID: 0x05AC
  Product ID: 0x821A
  HCI Version: 0x4
  HCI Revision: 0x34F
  LMP Version: 0x4
  LMP Subversion: 0x422A
  Device Type (Major): Computer
  Device Type (Complete): Mac Portable
  Composite Class Of Device: 0x38010C
  Device Class (Major): 0x01
  Device Class (Minor): 0x03
  Service Class: 0x1C0
  Auto Seek Keyboard: On
  Devices (Paired, Configured, etc.):
  PLAYSTATION(R)3 Controller:
  Address: 00-24-33-3A-43-9E
  Major Type: Peripheral
  Minor Type: Peripheral
  Services: Wireless Controller
  Paired: No
  Configured: Yes
  Connected: Yes
  Manufacturer: Cambridge Silicon Radio (0x3, 0x131F)
  Firmware Version: 0x0100
  Vendor ID: 0x054C
  Product ID: 0x0268
  Class of Device: 0x05 0x02 0x0508
  AFH: On
  AFH Map: 0000F0FFFFFFFF7F
  RSSI: -46
  Role: Master
  Connection Mode: Active Mode
  Interval: 0 ms
  Host Connectable: No
  EDR Supported: Yes
  eSCO Supported: No
  SSP Supported: No

Similar Messages

  • Can't pair wiimote with macbook pro

    Hi all, I'm trying to pair my wiimote (wii controller) with my macbook pro but i'm having problems. Basically i setup the wiimote to be discoverable, goto add new bt device from the mbp, it sees the wiimote, but keeps asking me to enter a passcode on my wiimote! I somehow need to tell the mbp to not need a passcode but cant find where to do that. any ideas?

    sorry ignore me... found it! :P

  • Can't pair iPhone 5s with Macbook Pro via Bluetooth

    I have an iPhone 5s and Macbook Pro with retina display (running on iOS 8.0.2 and Yosemite respectively). For some reason, my iPhone can never see my MBPr but the MBPr can see the iPhone. Pressing the "Pair" button on in the Bluetooth setting panel in OS X will trigger the pairing confirmation to show up on my iPhone. After confirming the pair request, the devices remain connected for no more than 2 seconds. Then they just disconnect. (The status is "Not connected" underneath my iPhone on the Devices list in OS X)
    This has been bugging me for a while, even before I upgraded to iOS 8 and Yosemite. I was hoping the upgrade will solve the issue but apparently not. My iPad  on the other hand has no problem in connecting and remaining connected to my MBPr. That's just baffling.
    Just some context: the reason why I wanted to connect my MBPr and my iPhone via Bluetooth is because I want to use my my iPhone as the hotspot. Yes, I can use the USB cable, but can't blame me for trying the wireless route (And no, connecting via wifi doesn't  work)
    Any help is appreciated!

    Hi ddfaulk,
    Thanks for using Apple Support Communities.  This article has some steps you can try if you're unable to pair your iPhone 5s to your MacBook Pro over Bluetooth:
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/ts2756
    Cheers,
    - Ari

  • Can't pair 5S with MacBook Pro

    When trying to pair the iphone 5S with the MacBook Pro, i'm told MacBook not supprted in this iphone.  Worked fine with previous phone (4S).
    Thanx,
    Boe

    Hi ddfaulk,
    Thanks for using Apple Support Communities.  This article has some steps you can try if you're unable to pair your iPhone 5s to your MacBook Pro over Bluetooth:
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/kb/ts2756
    Cheers,
    - Ari

  • A1255 Wireless keyboard not pairing with macbook pro 10.6.5

    Trying to pair my wireless keyboard with macbook pro but it's not pairing.
    What i did is :
    System Preference -> Keyboard -> set up bluetooth wirless keyboard
    my keyboard appears for a moment and the i goes off.
    it says 1 keyboard found then keep searching and suddenly no keyboard found.
    Any help is appreciated.
    Cheers

    Hello H:
    These forums are not chat rooms, but since you used my name I will address your post.
    Do you work for Apple?
    No. These are user-to-user forums. The forums are moderated by Apple, but do not represent official responses from the company. If an Apple employee would post here (very rare), they would have either a purple apple (forum host) or a silver apple (employee) under their name.
    Every post about this issue, going back to early 2009 you have made the SAME suggestion. It doesn't work.
    That statement is inaccurate. If you read the posts carefully, I do not cut/paste the same suggestion to address issues. However, trying to address issues without hands-on access to devices necessarily requires one to suggest solutions that have worked in similar situations. Bluetooth issues are not rocket science and there are only a few things that are available to resolve problems. If you look at the little blue bars next to my name that represent user +"thank yous+" for suggestions that worked, I must have made a few suggestions that did work.
    Like everyone else that tries to help others here, we are unpaid volunteers. If you have better sources to obtain information, I certainly recommend that you seek those sources out. If you have issues with Apple, take them up with the company. Ranting here about your particular problem is not helping anyone.
    Barry

  • Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?

    Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?
    Thanks!

    It should. First, turn on BlueTooth on the computer. In BT preferences be sure to check the option to look for all devices. Your remote should be picked up and a notice asking if you want to Pair it with the computer. Select Yes. Once it is paired it can be used to control your computer.

  • Unable to pair plantronics backbeat go 2 to macbook pro. Any solution pls?

    Unable to pair plantronics backbeat go 2 to macbook pro. Any solution pls? thanks!

    HI!
    I just synced my earbuds to my macbook pro.  Try:
    1) Setting
    2) Bluetooth Settings (Clicked "on" and "discoverable").  I also selected for the bluetooth setting to show Bluetooth in menu bar.
    Under settings go to "Sound" and "output".  My earbuds are in there twice but one does not work and the other has a "stereo" option. That does work.
    Now, iTunes automatically starts and I can hear my music on my earbuds.  I think itunes will override whatever you are trying to listen to.  The earbuds also worked with my online lectures for school.  So far the earbuds do not work for YouTube.
    Hope it helps.... good luck!

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • How can I restore data from my iPhone after sync with macbook pro?

    I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

    Welcome to Apple Support Communities
    You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
    After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

  • External hard drive compatible with macbook pro 10.5.8

    external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

    You can buy just about any USB2.0 hard drive and use it with your MacBook Pro.  Many older external drives come pre-partitioned and formatted FAT32 for use on Windows.  Your Mac can use that file system as well, but it has limitations on file sizes.  You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine.  One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices?  recent problem starting March 1, 2015.

    I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise.  As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600. 
    On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's.  Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date!  but sadly stays on LTE.
    Have tried resetting, replugging etc...
    Also, tried checking on updates.  Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
    A mystery...

    Reset the TC to factory and redo the setup. see details below.
    Here is the typical list of things you should try.. and if this doesn't help post again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
    If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
    How is the TC connected into the network? What function does it have? Router or bridge for example.
    Post a few screenshots of the setup.

  • I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

    i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read.  the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

    Hello chrispyw,
    If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
    OS X Yosemite: Adjust your display’s resolution
    If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Reset the system
    You can reset the Mac's parameter RAM and SMC.Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • What is the best external hard drive with MacBook Pro

    What is the best external hard drive with MacBook Pro?

    I agree with Allan, and that link is also called OWC, their hard drives are great.  Have three of their Mercury Pro Elite 2 TB quad interface drives.  They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options.  Drives seem to come Mac HFS formatted, but I always reformat and partition the drives.  Service and quarantees are top notch.
    They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

  • Is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

    Read through this:
    http://clients.websavers.ca/whmcs/knowledgebase/115/Keeping-your-Sent-folder-in- sync-across-devices.html

Maybe you are looking for

  • Error message trying to burn keynote presentation in idvd

    I know this has been posted before - but I can't seem to find an answer to fix my problem. I am trying to export a 30 slide presentation from Keynote 3 to iDVD 6 - the presentation is using slides which should be the optimum slide size for iDVD (acco

  • How to set password in JMS adapter

    Hi All, I have put a JMS adpater partner link into a BPEL process, and everything seems to work fine, except that it wants to authenticate to the App Server using oc4jadmin/welcome1 and I used a different password. Can anyone tell me where to set the

  • Why index is not used by this table

    Dear all, Currently I'm facing problem with tuning one sql statement. It shows that full table scan in ZTLTBC_FILTER cost 15:19. But in table ZTLTBC_FILTER, it have index with field index 1    MANDT INT_NAME FNAME VALUE index 2    MANDT EXEC_ID COUNT

  • Problems with Installing New Harddrive on SL510

    Could really use some help trying to diagnose the problem and a best way to try to resolve: I have a Thinkpad SL510 that was beginning to have blue screen issues and diagnostics indicated HD needed replacement. Purchased a 500GB SATA HD to replace my

  • Collaborative tools (wiki + forum)  : will we be able to use our own

    Hi, When collaborative tools will be included in Webcenter, will I be able to use my own instead ? My company uses Confluence as a wiki. any possibility to plug confluence to webcenter and any other choices we would have made (forum ...). Thanks.