Pairing e71 with Bluetooth Headset

Just got an e71, but I can't pair it with my Sony Ericsson HBH-PV702 Bluetooth headset. I can pair with other mobiles, but it say that it can't find the device. Can anyone help me please.

Hi,
In that case I would recommend trying this method here to reset the BlackBerry smartphone to factory settings
To do this we would need to back up the BlackBerry smartphone. Please open the BlackBerry Desktop Manager and connect your BlackBerry smartphone. Click on the Backup and Restore button and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry smartphone.
Once you have backed up follow this article.
Link: http://www.blackberry.com/btsc/KB18998
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

  • My ipod nano paired twice with my headset and now nothing. The headset states bluetooth profile is A2DP, AVRCP, HSP and HFP whatever this means.

    My iPod nano paired twice with my headset and now nothing. The headset has a bluetooth profile: A2DP, AVRCP, HSP and HFP. I have no idea what this means. My iPod shows the headset ID number but now shows "connection failed"

    Hello zedor6,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/ht1664
    Best of luck,
    Mario

  • Very happy with IMac version 10.4.11 Paired a wireless Bluetooth headset with the intention of using it to listen to radio podcasts. However, cannot connect headset. Any suggestions??

    Very happy with IMac version 10.4.11 Paired a wireless Bluetooth headset with the intention of using it to listen to radio podcasts. However, cannot connect headset. Any suggestions??

    Perhaps this "hint" might resolve your problem:
    http://hints.macworld.com/article.php?story=20050520082617274

  • C2-00 Problem with Bluetooth headset

    I use it for a week and have a problem with bluetooth headset.
    When I finish a call my mobile is stop working.
    The only way to get it back is remove a battery.
    I try to use other bluetooth headset but it have the same problem.
    Please help me to fix this problem.
    Thank you.

    conceivably, yes, that is how its supposed to work
    i was just wondering if there was a way to turn it off somehow, so as to only enable the bluetooth for calls and not for all audio. unpairing and pairing the bluetooth definitely works, but it just seems like overkill everytime i want to anything regarding sounds (asise from calls)
    thanks,
    vasilis

  • How to listen/watch videos on ipad mini with bluetooth headset

    how can I listen/watch videos (e.g You Tube) on ipad mini with bluetooth headset. The headset is paired but the sound comes only from the ipad mini internal speaker

    I was the fan of this feature until ios 6 version. I have two mini ipads @ my home for my kids. It helped my kids a lot to play all the episodes within a tv show. Apple some how decided kill the features linked to someone's patent in ios 7, thereby they can avoid paying royalty fee to the patent holder. Even from the initial days there are lot of such features missed out in ipad, iphone or MAC. You might overlook these features as a consumer.
    I will be surprised if Apple listens to this customer feedback.
    I am seeing the same question being raised in many forums including within apple forums.

  • Nokia6300 compliance with Bluetooth Headset BH-600

    Hi all
    According to the techical description of the Nokia 6300, it should be compliant with bluetooth headset BH-600, but obviously, my cell phone doesn't recognize this periopheral.
    Can someone help me or confirm compliance.
    Much appreciated :-)
    Cleo- France

    it is compliant... are you sure you are following the pairing steps correctly?

  • Does Facetime support with Bluetooth headset

    Did any one try out communicating facetime with Bluetooth headset successfully??

    lllaass wrote:
    Neither the iPod Touch or iPad has the necessary bluetooth profile (HFP (Hands Free Profile)) that support headsets. See:
    http://support.apple.com/kb/HT3647
    Thanks for that info.
    Directions for how to Pair a Bluetooth headset ... with iPod touch are given on Page 40 of the iPod touch User Guide for iOS 4.1 Software:
      http://manuals.info.apple.com/enUS/iPod_touch_iOS4.1_UserGuide.pdf
    Testing will let OP know whether the "Bluetooth headset" is one that can connect.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

  • 3GS doesn't work correctly with Bluetooth headset?

    Why won't my husband's 3GS work correctly with Bluetooth headset? I have a 4S, and I bought a Plantronics 903  Bluetooth headset, and it plays music great out of headset, but when I tried to do that with my husband's 3GS, only one earpiece plays?

    It is not supposed to fit, and murray65 is correct - Apple never made a dual dock for the iPhone 3G, and in fact, early this year they discontinued the Apple Bluetooth Headset. You can either just use the travel cable to charge both devices, or you can use a Dremel (or carton knife, etc.) to widen the opening in the dock for the iPhone to accommodate the slightly larger and more rounded iPhone 3GS. See the last few posts in this thread for some links to pics of the process.

  • 10.4.8 Issues with bluetooth headset

    Hello!
    I have always used a Logitech Bluetooth Headset with the SIP client XMeeting under OS X 10.4.5 without any issues. AfterI updated to 10.4.8, the headset only works when I switched on PRIOR to booting the Mac.
    If I switch it on after booting the Mac, its LED blinks blue with a strange sequence (two short blinks every 2 seconds or so - a headset state that the user's guide does not even mention).
    But even if I switch it on prior to booting the Mac, it will not really connect (i.e. get out of standby mode) when I start XMeeting, instead it will connect with a delay only when I start a call with XMeeting.
    Does anyone else face issues with bluetooth headsets? Or has someone found a fix for that?
    Thanks,
    Erik

    Issue resolved with patches to 10.4.8 and follow-on versions.

  • N8 not pairing with bluetooth headset when connect...

    I have a weird issue!
    My N8 connects to my bluetooth headset and functions flawlessly usually. But whenever I connect my N8 via bluetooth to my PC it stops pairing with the headset. The moment it connects with the PC, the headset icon appears in my N8, despite it not having paired the headset.
    This issue is nagging me for quite some time. Any suggestions please...

    I'm running a bit on thin here but let's see.
    It might be possible that your N8 thinks the PC is acting as an audio device to your N8. Have you tried what happens when you have the connection establised over BT and you start playing music on the N8 or there's an incoming call? If the music is played through the N8 speakers or you can take a call, then audio is not routed through your PC.

  • Not able pair my nokia 5230 with bluetooth headset

    I am trying to pair jabra bluetooh headset with my nokia 5230, but i am not able to pair it..
    Can anyone help me with this please...?

    Hello Jamessm,
    I would try the troubleshooting steps in the following article about Bluetooth and iOS devices.
    iOS: Third-party Bluetooth headsets, headphones, and keyboards
    http://support.apple.com/kb/ht1664
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Speech Recognition not working with bluetooth headset

    I've got speakable items turned on and everything set the way it should, but I can't do spoken commands via a bluetooth headset. I've tried it on two seperate headsets by differing manufacturers, with no luck on either. I tried with a USB headset and it worked fine, but the bluetooth won't acknowledge any commands. They work fine in every other application, and the speakable items bubble thing that comes up shows sound being recognized fromt the set, just no commands acknowledged.

    Problem solved and voice control via bluetooth headset has been restored. Here's how:
    With headset off, go to Settings/General/Bluetooth and turn BT on. When the list of devices comes up showing "not connected," click the blue right arrow and then choose "forget this device." Shut down iPhone by holding top button until red slider shows up and sliding it to the right.
    Remove battery from headset so it will reset. Restart iPhone (hold down top button until apple appears). Go to Settings/General/Bluetooth and make sure BT is "on." Replace battery in headset and turn it on. You should see the PIN entry screen, meaning that your headset is being re-paired with the iPhone. Enter the PIN for your headset.
    At this point, try taping the BT button and see if you get "Voice Control" screen and double beep in headset. If so, you're done. If not, try this sequence again.

  • Can't pair Logitech FreePulse Bluetooth headset

    It refuses point blank to work.
    I can put the headset into "discoverable" mode with the red/blue flashing.
    I can set up the Bluetooth device and pair it with the 0000 passkey.
    It WILL NOT connect.
    I CAN'T choose it from the Sound devices in system preferences.
    How do I fix this?

    A2DP support can be added to Tiger, however, being that it is a "hack" you should backup your data at least twice before attempting. You should do this anyway before installing Leopard. To backup at least twice, follow these directions*:
    http://www.macmaps.com/backup.html
    Once you have the backup complete, see this hack:
    http://blog.david.connolly.name/2007/06/stereo-bluetooth-profile-a2dp-on-mac-os. html
    Note, with hacks, you may encounter difficulty upgrading your operating system.
    Verify the hack works first with upgraded operating system before performing the the hack.
    Also before upgrading your operating system, verify all your software and hardware is known to work with it first.
    - * Links to my pages may give me compensation.

  • Using Nokia 6680 with Bluetooth Headset BH-601

    Hi all,
    I have Bluetooth headset model BH-601 and need to use it with my 6680 mobile.
    I was able to pair the headset with the mobile but I couldn't listen to music as stereo, I was able to listen to music on the left speaker of the headset with very low quality as I was listening using normal headphone.
    I tried to use the headset with my PC and it worked perfectly.
    Is there a way to configure the mobile to use the BH-601 as stereo headset?
    Is there a compatible music player.
    Thank you,
    Hadi

    The 6680 does not have the bluetooth profile necessary for listening to music in stereo on a bluetooth headset. As far as I am aware there is no way to get this profile onto the phone.
    The only Nokia phones that have this profile is the 8800 and possibly the 7390 which I dont think is even released yet.

  • Google Voice Won't Work With Bluetooth Headset After Jelly Bean

    I am SO frustrated. I had no idea I was installing the Jelly Bean update when I updated the software on my phone. Note to Verizon Communications team: PLEASE do a better job of communicating significant software updates. I would not have installed Jelly Bean. I learned long ago to stick with factory OS on my phones.
    Since the update, I noticed that I could no longer dictate texts and emails. Also, my call recording app no longer worked. I switched to Swype and it would work for a few minutes and then stop.  I could still use my bluetooth headset to make calls and S voice worked (although, like others here, I noticed that it's now worse--it doesn't recognize any contact names I request anymore). After trolling Android forums I found that the problem is with the bluetooth headset. You can still dictate when the phone's bluetooth is on, but when a device is connected, all bets are off.
    I almost did a factory reset, but then I read that a hard reset will not restore ICS, nor did it resolve this bluetooth Google Voice issue for the few people who tried it already. In fact, resetting caused more problems (eg., more battery drain and removal of Adobe Flash, etc.).
    Does anyone know how I can go back to ICS? Bluetooth and Google Voice are the two features I value most in my phones. This is a NIGHTMARE.

    rcschnoor -
    The Bluetooth/Voice Search/Dictation issue is a valid issue for the OP, a valid issue for me and oh yeah, the hundreds of other people affected by the, "Google Voice Search stuck on "Initializing" bug filed here on the Google Android Project page.  Here is yet another reference to the same issue from Android Central.
    The "Google Music freezing after Jelly Bean Update on Galaxy S3" is also a valid and documented bug located here also on the Google Android Project page.
    So I ask, how does sharing with these people that do have these issues, and are affected by them, that you are not experiencing these issues help in any way?  Isn't that the whole purpose of a community forum to help others?

Maybe you are looking for

  • I need to get my iPod touch 4 and iPad 1 in sync from 2 different computers

    I have a very specific situation that I've been unable to find an answer for.  Please help!  Here's my current situation: I've synced my iPad to my iMac G5 PowerPC using my AppleID account that I always use.  I've synced my iPod touch 4th gen to my i

  • Acrobat Cuts Off Bottom Of pdf When Printing

    I'm trying to create a printable form for a web page. I originally created the form in Photoshop 7, then used Acrobat 7 Pro to convert it to a pdf for downloading/printing. The problem is that Acrobat cuts off the bottom of the page when you attempt

  • Running Forecast in the backgrd chooses Forecast  from the INTERACTIVE mode

    Folks When I tried to run forecast through background job, instead of running the forecast based on the Master Profle & Univariate profile I had defined in the Activity, forecast is being run based on the Master Profle & Univariate profiles specified

  • How to restore ipad in recovery mode

    I am trying to restore an iPad Gen 3 on IOS 6 using recovery mode but iTunes cannot find the backup file on my PC while the iPad is in recovery mode. However, on my PC, iTunes shows that a backup exists when I say that I need to do a restore. The res

  • TS2198 iCal keeps crashing on my iPad.

    iCal keeps crashing on my IPad when I page through more than 2 months.  Any idea why and what I can do to stop it?