Pairing Iphone 3G with Imac?

How would you go about pairing an Iphone 3G to a Imac ? Also what is (PAN)? In what way would a Iphone be able to interact with the Mac ?

I was messing around with this, curious as well.
I could get my 3g to pair with my mini but not actually connect to do anything.
The thing I would like to be able to figure out is to use the iphone remote app to control the itunes on my mini and stream back through bluetooth to my iphone!
It seems like it should be possible, among other things but I just cant figure it out....

Similar Messages

HT1386 How to pair iPhone 4 with iPadc 3

Inshaa ALLAH I welcome all on board it will be nice to see How to pair iPhone 4 with iPadc 3 .regards nawabdera

Not possibleto make direct connectionother than as personal hotspot
when so configured/supported by your wireless provider. What are you trying to do?
Connect one device with computer and put the information you wish to
share into iTunes; connect the second device to iTunes and choose
what you wish to sync.

HT204387 Cannot pair iPhone 5 with Toyota Camry Bluetooth

I cannot pair iPhone 5 with Toyota Camry Bluetooth. Never had a problem with android

Two things that you need to verify first
1. The first step in troubleshooting any accessory is to determine whether the accessory is compatible with the device. Contact your automotive manufacturer or the manufacturer of your aftermarket head unit to see if your iPhone, iPad, or iPod touch model is compatible.
2. Verify that both your car kit and your iOS device are running the latest software versions. To verify that your car kit is up to date, please contact your automotive manufacturer or the manufacturer of your aftermarket head unit.
Also follow the Link. hope this helps.
http://support.apple.com/kb/TS3581
Regards,
Taz

Cannot pair iphone 6 with mercedes

I used to use iphone 5 in my mercedes but now cannot pair iphone 6 with my car's bluetooth phone system. Any suggestions?

Hi, nalcioglu.
Thank you for visiting Apple Support Communities.
Here are a couple articles that have some helpful troubleshooting steps regarding car stereo connections and an iOS device.
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Cheers,
Jason H.

Pair iphone 5 with jabra BTE2

how to pair IPHONE 5 with JABRA BTE2 tried a lot
but IPHONE4 is CONNECTED with the JABRA BTE2

No, they will not interfere.
I pair my phone with my car, multiple bluetooth headsets, bluetooth speakers, a Wahoo Blue SC speed and cadence sensor, and a Scochse bluetooth heart rate monitor regularly without any issues.
Granted I never have more then two at a time paired.
Having a fuelband will have not affect on the other devices as it uses a seperate profile.

Cant use continuity on iPhone 6 with iMac, can anyone help?

Cant use continuity on iPhone 6 with iMac, can anyone help?
Running iso8 on iPhone 6 space grey 64gb
Running OS X Yosemite on iMac 2010 -12 gb i3 1TB
handoff has been switched on off with restart, but doesn't show on iMac with incoming call
any ideas?

HAve you checked its its a feature supported by older macs ?
if so then it maybe a beta softtware issiue

Can't pair iPhone 5 with Mac mini or iPad

When I try to pair my iPhone 5 with my Mac mini (current model), I'm able to go through all the steps and the Mac shows the iPhone is connected for about 1-2 secs and then drops the connection. I'm trying to pair them so I can use the TokenLock app to automatically lock my Mac when I walk away from it.
I have the exact same issue when trying to tether my iPad to my iPhone via bluetooth to connect my iPad to the internet. A connection is established for only a couple seconds. I'm able to tether via wi-fi though.
What am I doing wrong?

You can't connect two apple devices via bluetooth not supported. Here are the supported profiles http://support.apple.com/kb/ht3647
for hotspot http://support.apple.com/kb/HT4517
troubleshooting http://support.apple.com/kb/TS2756

Pairing iPhone 4 with Jabra BT3030

Does anyone else use a Jabra BT3030 that has been paired successfully to the iPhone 4? I was always able to do it with my previous Verizon phone (Samsung Omnia) but when I try to pair it to the new iPhone 4, I can't get to the screen where the passkey (0000) is entered. The phone recognizes the device and says it is not paired, but then it goes straight to connected status without letting me open the passkey screen. Once it's connected, the only option is "Forget this Device", (which I would rather not since I like it). Even though it shows connected, the phone and Jabra don't communicate. I've followed the steps shown on the Jabra website and the iPhone manual, but to no avail.

Hello,
Thank you for providing the bluetooth accessory that you are trying to pair to your device. Below are the instructions on how to pair specifically to your iPhone. The security code can either be 0000 or 1234.
Step 1 - Enable Bluetooth functionality on the iPhone 4
From the Home screen, select Settings.
Select General
Select Bluetooth
Set Bluetooth to On
Step 2 - Put your fully charged Bluetooth headset into pairing mode.
Press and hold the answer/end button to turn on the headset
Your headset will automatically go into pairing mode when you turn on for the first time
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset
Manual Paring
Press and hold the answer/end button for 5 seconds until the keypad turns solid blue
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset
Step 3 - Pair the iPhone 4 with a Bluetooth Accessory
With Bluetooth power on, from the Home screen, select Settings.
Select General
Select Bluetooth
Place accessory in pairing mode. See accessory pairing instructions
Choose the accessory device on iPhone, and enter its passkey or PIN number, normally 0000 or 1234

Pairing iphone 5 with plantronics M165

I have been using the Plantronics M165 earset with my iPhone 4 (OS 6.12), paired via bluetooth. I disconnected the M165 earset from iPhone 4 and I tried to connect it with my iPhone 5 (using the same procedure that I used when I was connecting it with iphone 4). But when I turn ON bluetooth from my iPhone 5 (OS 6.12), it does not discover the M165 earset. It keeps on searching....but it finds nothing. Though the two iphones (4 & 5) use the same OS, I cannot also pair my two iphones to each other via bluetooth. Now I cannot even pair M165 back with my iphone 4 I need help......
Txs

I've got the same problem but I found the following solution, by pairing again the two dispos.
as far as the plantronics M165:
Turn on your device’s Bluetooth feature.
Turn the headset on.
Press and hold the call control button for about 5-6 seconds until the light on the headset starts flashing red-white. Release the button and set the headset aside.
On your cell phone, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset. It will appear as "PLT_M155" or "PLT_M165" in your list of devices.
If prompted for a passkey, enter 0000 (four zeros). Note: Many phones do not prompt for a passkey.
hope will work for you as well.

Pairing mobil phone with iMac

I would like to send some photos from my Samsung mobil phone to my new iMac using Bluetooth. I can get the devices to pair with no problem but the "Connected" button goes red (not connected) and I can't find a way to change it to green. When I go to the photo screen in the phone and try to send a photo the phone does not recognize the computer at all. I've connected the computer to the phone and then the phone to the computer. Bluetooth sharing in preferences is on. No help. Any ideas?

The connected light only goes green when there is some actual Bluetooth activity going on between the two devices. When they are just paired it will be red. It will turn to green automatically when the phone and computer are actually communicating.
I don't know about your Samsung specifically, but usually when you send a photo by Bluetooth the phone will search for Bluetooth devices and give you a list of ones it finds, then you choose the one you want to send to.
Also, another possibility is to try browsing the device from the Mac via the Bluetooth menu, and pull the photos across that way.

HT204387 Has anyone found a solution to bluetooth pairing iPhone 6 with Toyota Camry volume settings?

When using the iPhone 5 and pairing with 2013 Toyota Camry, the bluetooth settings are normal.
When changing to an IPhone 6, there is a problem.
When the phone goes to bluetooth in the car, the volume setting is triggered to increase to top volume of 60.
When we change the setting via directions of Toyota to change the phone volume, the volume goes down but is not reset.
When the phone is paired upon entering the car, the volume goes right back to 60.
Toyota states they have not tested the new phone yet and do not have any solutions.
Help?
Linda

Hey avparthas,
Thanks for the question. I understand that you are experiencing issues with a bluetooth accessory. The following resources outlines relevant troubleshooting steps that may help to resolve your issue:
If you can’t use a Bluetooth accessory or car kit
http://support.apple.com/kb/ht6473
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thanks,
Matt M.

Pairing iPhone 3GS with iPad 2

I thank all of you for the post related to Iphone and Ipad tethering.
But, I'm wondering why the iPhone cannot be paired with the iPad using Bluetooth without turning on the Personal Hotspot? If this is possible, please, help me doing it, if not Apple should think about that ASAP.

Bluetooth on the iPad is aimed at devices such as headphones and keyboards
If you want to leave feedback to Apple then you can do so here http://www.apple.com/feedback/ipad.html

Can't pair iPhone 5 with 2005 Acura TL or 2009 Lexus RX350 after IOS 7 upgrade!

Ever since I upgraded to IOS7, I have not been able to connect my iPhone 5 to the bluetooth in my car (2005 Acura TL). I tried to delete the pairing and re-pair, but the phone can no longer find the bluetooth device! I also tried to pair to my wife's car (2009 Lexus RX350), but that won't work either!! Just to note, bluetooth worked fine before with IOS6. My wife's phone (4S IOS6) also connects fine to the Lexus. I have an iPhone 5S on order for her, but I might just return it and switch my whole family to Android for good!
Please fix this issue ASAP. This is a major issue as people rely on bluetooth for safety while driving.
Details: I tried both patches (7.01 & 7.02) and neither one resolved the issue. My phone is currently on 7.0.2 (11A501).

I'm having the very same problem with my 2005 Acura TL. Ever since the last iOS update.

Can't pair iPhone 5s with Macbook Pro via Bluetooth

I have an iPhone 5s and Macbook Pro with retina display (running on iOS 8.0.2 and Yosemite respectively). For some reason, my iPhone can never see my MBPr but the MBPr can see the iPhone. Pressing the "Pair" button on in the Bluetooth setting panel in OS X will trigger the pairing confirmation to show up on my iPhone. After confirming the pair request, the devices remain connected for no more than 2 seconds. Then they just disconnect. (The status is "Not connected" underneath my iPhone on the Devices list in OS X)
This has been bugging me for a while, even before I upgraded to iOS 8 and Yosemite. I was hoping the upgrade will solve the issue but apparently not. My iPad on the other hand has no problem in connecting and remaining connected to my MBPr. That's just baffling.
Just some context: the reason why I wanted to connect my MBPr and my iPhone via Bluetooth is because I want to use my my iPhone as the hotspot. Yes, I can use the USB cable, but can't blame me for trying the wireless route (And no, connecting via wifi doesn't work)
Any help is appreciated!

Hi ddfaulk,
Thanks for using Apple Support Communities. This article has some steps you can try if you're unable to pair your iPhone 5s to your MacBook Pro over Bluetooth:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
Cheers,
- Ari

Cant pair IR remote with iMac

I have the latest 27" iMac and can't pair my apple IR remote, I haveread a lot of the other posts regarding this "problem", I have no option to "pair" in the security settings that has been mentioned in other posts. I tried the IR remote i have for the Apple TV and that doesnt work either. I dont really want to install CandelAir, what else can i do?
Cheers - the frustrated remote girl!!

If you own an iPhone, iPod Touch or iPad.
Here's an app
http://regularrateandrhythm.com/apps/rowmote-pro/
or this
http://www.amazon.com/Satechi-MediaRemote-Bluetooth-Multi-Media-Control/dp/B0082 4948U/ref=sr_1_10?ie=UTF8&qid=1364328484&sr=8-10&keywords=Satechi
http://www.amazon.com/Satechi-Bluetooth-Pointer-Presenter-Control/dp/B00A3WRM5G/ ref=sr_1_1?ie=UTF8&qid=1364328551&sr=8-1&keywords=Satechi+Remotes

Pairing Iphone 3G with Imac?

Similar Messages

Maybe you are looking for