Pairing Jot Touch with Adobe Ideas...

So, the instructions I found on this board for pairing my Jot Touch 4 stylus with adobe ideas didn't work for me.  I have my stylus on, I open Ideas, open a document, but no pen icon appears.  My stylus' green light is blinking, indicating it is searching for an app with which to pair - but no luck.  Any thoughts on what I'm doing wrong?

The steps suggested did not help.  No green light comes on when pressing that button. The pen is powered on but not paired with iPad, and the pen is not in pairing mode (rapid flashing red/green). iPad Bluetooth is on.
This link http://adonit.net/support/jot-touch/ suggests that older pens will not work anymore:
"We have just learned that due to changes in iOS 7, your Jot Touch will no longer be able to communicate pressure sensitivity and shortcuts to upgraded devices. This only affects the original Jot Touch, the Jot Touch 4 will still work normally. Please contact [email protected] with any questions"
My pen has a plus sign near the adonit name. I think that means it is an earlier version. I got this December 2012.
Now what?

Similar Messages

  • Why doesn't Adobe Draw support Jot Touch with Pixelpoint, yet the FAQ indicates it does?

    Bought an iPad Air 2 & the Jot Touch with Pixel Point a week ago so I could use the mobile apps.  So far I love what I can draw with my finger, but I need the pressure sensitivity and precision of a stylus.
    After troubleshooting for a week with Adonit customer service, I got this response:
    Hello! Thanks for your response. We've actually have seen issues with the new screen bonding on the iPad Air 2s. This seems to have affected almost all styluses and even some apps that don't require a stylus. It has to do with the way the screen bonding interferes with the detection of contact points on the screen. Please refer to our blog post on this issue here:
    http://www.adonit.net/blog/archives/2014/11/19/improvements-underway-ipad-air-2/
    Our development team has been hard at work though on a software fix to help provide some corrections for that issue, and this has been used by a number of app developers already; GoodNotes 4, ZoomNotes, Sketch Club, Penultimate, Procreate, and (Autodesk) SketchBook, so you can try one of those Apps. This does provide a better experience, though some problems may still remain.
    I hope this information helps!
    Regards,
    Debbie
    Adonit Support
    So Adonit is recommending I don't use the Adobe mobile apps?
    The post Debbie refers to is from Nov 19, 2014.  Will Adobe update the mobile apps to address these connectivity issues?
    Since Adonit manufactures the Adobe Ink & Slide, I assume it will have the same issues?

    I've done this multiple times and it produces essentially the same message, but there is a mention that a restart is pending. This is also strange because this is definitely not the case. First time I used CScleaner it took a while and was obviously busy correcting something. However now when I select clean all, it simply dumps anopther massive log file into AppData and says cleaning completed successfully. Now I just ran it again, so would you like me to post the more recent log file?

  • Will ink and slide ever be available to work with Adobe Ideas?

    Or is there a way to make it work, it actually works well with Paper App by 53. I don't understand why it seems impossible to connect it to Adobe Ideas!

    Ink should work with Adobe Ideas as a passive stylus.  In other words, it will allow you to draw and tap, but pressure sensitivity and palm rejection are not currently supported.  If Ideas is not recognizing Ink, make sure Ink is on by holding down the button until the LED turns on and goes through the rainbow sequence. 
    We are continuing to add Ink & Slide functionality to Adobe's mobile apps and will announce support as it becomes available.  Please stay tuned.  Thanks!
    Cathi Kwon
    Principal Product Manager, Adobe Ink & Slide

  • Pairing iPod touch with Bluetooth head set

    I have a Gen2 iPod touch and just bought a bluetooth head set to use with skype but when I turn on Bluetooth it wont discover it and I know the headset works because it pairs with my computer.
    I bought the os upgrade when it came out and just updated the software, I also restarted the iPod. the only thing I haven't done is restore the iPod which I wanted to avoid.
    Anyone had this problem before? Any ideas of how to fix this?

    Assuming Nissan says it will work with an iOS device with iOS 8:
    - Reset the Nissan system
    - Reset network settings on the iPod: Settings>General>Reset>Reset Network Settings. You will have to rejoin wifi networks and re-pair all BT devices
    - Go to Nissan's support site
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    Note that sometimes an iOS update breaks compatibility.

  • Pairing Ipod touch with Bluetooth in my 14' Nissan Altima

    I tried pairing my ipod touch to my Nissans Bluetooth and it did not work. On my Iphone it would come up as my car, but my ipod did not find "My Car".

    Assuming Nissan says it will work with an iOS device with iOS 8:
    - Reset the Nissan system
    - Reset network settings on the iPod: Settings>General>Reset>Reset Network Settings. You will have to rejoin wifi networks and re-pair all BT devices
    - Go to Nissan's support site
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    Note that sometimes an iOS update breaks compatibility.

  • Pairing iPod touch with BB

    Hi, I want to connect to the internet on my iPod touch 2g iOS 4.1 via my BB curve 8520. Is that possible? My iPod is jailbroken. What would I need to do?
    Any help would be appreciated, thanks

    Assuming Nissan says it will work with an iOS device with iOS 8:
    - Reset the Nissan system
    - Reset network settings on the iPod: Settings>General>Reset>Reset Network Settings. You will have to rejoin wifi networks and re-pair all BT devices
    - Go to Nissan's support site
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    Note that sometimes an iOS update breaks compatibility.

  • Where's my authorization code and how do I actually get in touch with Adobe?

    Right, so I purchased a pre-payment card from PCWorld for the student & teacher version of Lightroom 5. Tried to download Lightroom 5 only to find that it wouldn't work with Mac OS 10.6. So, I have upgraded my OS, but now I can't find anywhere on my account that I've redeemed the card and have had no communications from Adobe regarding my proof of being a student. Trying to contact Adobe is useless, as all I get is going round in circles. It seems impossible to actually contact anyone at Adobe!!

    Kharga if you still need to redeem your redemption code then please see Serial number, Redemption, and Product codes | Student & Teacher Editions. 
    If your code has already been utilized then it is likely the serial number is available under your account at http://www.adobe.com/.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • When will creative cloud sync with adobe ideas work again?

    worked fine a few days ago...

    Not an answer - just support for the questioner! I can't get ideas to sync files to CC anymore either. What's happening?

  • Jot Touch 4

    Does the Adonit Jot Touch 4 sync with Adobe Ideas? If so how do you do this on an iPad?

    Hi!  Adobe Ideas does not currently have support for pressure sensitive stylus, including the Adonit Jot Touch 4, but the engineering team is actively evaluating inclusion of Stylus support in a future release.
    Stay tuned -
    Kim
    Adobe Ideas Team

  • Non NVidia graphics card issues with Adobe and Mountain Lion

    It took me a while to figure it out, but now I am certain. If using a Mac with a non nvidia graphics card there will be issues in Mountain Lion while using Adobe products. I tested this with Illustrator CS6 for over a year on 5 different Mac computers.
    Here is what happens
    As soon as I open Illustrator on a Mac without a NVidia graphics card and I attend to apply an shadow effect, Illustrator crashes. If I do this procedure on a Mac with a NVidia inside, all works well.
    I tested this on the following Macs
    MacBook Pro (Early 2009) with NVidia 9600M GT - it works
    MacBook Pro (Early 2011) with Radeon 6750M - doesn't work
    Mac Pro (Early 2009) with Radeo HD 5770 - doesn't work
    The same Mac Pro (Early 2009) with NVidia GT120 - it works
    MacBook Air (Mid 2012) with Intel HD 4000 - doesn't work
    iMac (Late 2012) with NVidia 680MX - it works
    Since I owned all these Macs, I could test it several times with different kind of software updates. 10.8, 10.8.1, 10.8.2 and 10.8.3 did deliver the same result. Everytime the same result.
    Already got in touch with Adobe
    With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
    What can be done, to resolve this issue? I cannot buy only Macs with NVidia inside, since the small portable front of Macs is only coming with Intel graphics cards. And is there anybody out there, having this issue? I cannot be the only one, using shadows in Illustrator.

    With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
    A typical response.  IMO it's most likely a combination of Adobe's reluctance to fix the issue combined with Apple's desire for advancement and change.  I've personally experienced several things that've become broken owing to Apple changing fundamental aspects of the OS, and the developers of the third-party software in question have either never fixed their software, or are taking their sweet time.  WireTap Studio and Snapz Pro from Ambrosia are a case in point, though they eventually fixed Snapz Pro.  Eventually…
    Frankly, good luck getting either side to do anything about this.  Your best bet is probably getting in touch with AppleCare and seeing if you can get this escalated to Engineering, but I wouldn't hold your breath for a fix from either party.  Or perhaps one of the Apple mailing lists will prove useful.

  • Can't download DW5.5. Error with Adobe Download Assistant

    I am getting error 100 with the Adobe Download Assistant (ADA). The log is below. IE can connect to https://www.adobe.com/cfusion/flex2gateway so why is ADA having problem? I wish Adobe didn't take away the direct download links. Searching the forums it seems lots of people are having problems with iADA and it must be causing support headache for Adobe.
    My suggestion is for people who know what they're doing, provide the direct links. For people who don't know what to do after the download or have slow connection, they can use ADA.
    6/27/2011 12:09:52.332 [ERROR] handleLoginFault - (mx.rpc::Fault)#0
      content = (Object)#1
      errorID = 0
      faultCode = "Client.Error.MessageSend"
      faultDetail = "Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'https://www.adobe.com/cfusion/flex2gateway/'"
      faultString = "Send failed"
      message = "faultCode:Client.Error.MessageSend faultString:'Send failed' faultDetail:'Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Failed: url: 'https://www.adobe.com/cfusion/flex2gateway/''"
      name = "Error"
      rootCause = (mx.messaging.events::ChannelFaultEvent)#2
        bubbles = false
        cancelable = false
        channel = (mx.messaging.channels::SecureAMFChannel)#3
          authenticated = false
          channelSets = (Array)#4
          connected = false
          connectTimeout = -1
          enableSmallMessages = true
          endpoint = "https://www.adobe.com/cfusion/flex2gateway/"
          failoverURIs = (Array)#5
          id = (null)
          mpiEnabled = false
          netConnection = (flash.net::NetConnection)#6
            client = (mx.messaging.channels::SecureAMFChannel)#3
            connected = false
            maxPeerConnections = 8
            objectEncoding = 3
            proxyType = "none"
            uri = "https://www.adobe.com/cfusion/flex2gateway/"
          piggybackingEnabled = false
          polling = false
          pollingEnabled = true
          pollingInterval = 3000
          protocol = "https"
          reconnecting = false
          recordMessageSizes = false
          recordMessageTimes = false
          requestTimeout = -1
          uri = "https://www.adobe.com/cfusion/flex2gateway/"
          url = "https://www.adobe.com/cfusion/flex2gateway/"
          useSmallMessages = false
        channelId = (null)
        connected = false
        currentTarget = (mx.messaging.channels::SecureAMFChannel)#3
        eventPhase = 2
        faultCode = "Channel.Connect.Failed"
        faultDetail = "NetConnection.Call.Failed: HTTP: Failed: url: 'https://www.adobe.com/cfusion/flex2gateway/'"
        faultString = "error"
        reconnecting = false
        rejected = false
        rootCause = (Object)#7
          code = "NetConnection.Call.Failed"
          description = "HTTP: Failed"
          details = "https://www.adobe.com/cfusion/flex2gateway/"
          level = "error"
        target = (mx.messaging.channels::SecureAMFChannel)#3
        type = "channelFault"

    abdu wrote:
    The Assistant is a Windows application which I expect it will download and install DW for me.  How is a browser involved in this scenario?
    i don't have any of the CS products installed and the cleaner didn't have any work to do.
    Sorry, I thought the Cleaner would do it.  Did another search and found these instructions to remove the download manager:
    http://kb2.adobe.com/cps/400/kb400533.html
    The browser is involved because it runs as a plugin of the browser.  Plugins are different for the browsers.  IE typically runs through ActiveX whereas other browsers run through a java enabled version.  By trying the download in another browser you can rule out where the problem lies.  Otherwise, I feel your only solution is to get in touch with Adobe support because this is a user-to-user community and there won't be much more help than KB articles.  Also with Adobe email support you can email them log files to look at.  It's along the process and will explain as you go.

  • Why is Adobe Ideas FREE?

    Hej,
    Just simple question
    This is amazing app... not AMAZING!!!! app and I would like to see a lot of new cool features...
    Having small payment, or pay for plug-in will support this project and maybe make it more wider (ex: recreate Android version)
    I compared a lot of other apps with Adobe Ideas, but nothing was so cool as Adobe Ideas.
    Do you have open backlog and roadmap of the features? just to see the new exciting improvements...
    Best Regards,
    Denis Miller

    There is no subscription needed to read PDF files. You may be trying to use one of the conversion functions in Adobe Reader, which are an add-on. This can also happen if you try to do something like open a Word document in Adobe Reader.

  • Adobe Ideas – Sync Process: Awaiting Connection

    I've seen many issues with Adobe Ideas and it having syncing problems, but I can't find an actual answer other than "servers were messing up, better now," and people saying that helped.
    I'm running Adobe Ideas on an iPad 2 Wi-Fi, running iOS 7.1.2.
    When I open Adobe Ideas, the Cloud icon and the left and right arrows are white. less than a second later, the arrows gray out. When I click it, it says "Sync Process: Awaiting Connection."
    If I turn the Wi-Fi off and back on and then revisit the app, it tells me that the sync process is complete.
    I've tried to send to Illustrator, but I don't actually know what that means. I thought that might mean that it would send it to my CC files, but that didn't happen.
    I downloaded Adobe Draw in hopes that I could import the files, but apparently the files have to be on Creative Cloud to begin with—kind of a ridiculous situation when one would assume that if you have both apps on one device, you could move files between them.
    Any help on getting this to sync to CC would be appreciated.

    It's a shame you haven't had a reply to your post. I am in exactly the same situation. I suspect support for Adobe Ideas might have been withdrawn to the point where Adobe would prefer not to acknowledge its continued existence. I can no longer find the app in the store, and am eternally thankful to still have the version prior to the most recent update, which apparently includes a reminder, each time it is opened, to migrate to Draw.
    I think synching between Ideas and CC must have been disabled at source, sometime earlier this year. The last time it worked for me was in February.
    I find Draw clunky and awkward, with a file system that is so untidy and badly organised it beggars belief. It's also impossible to export pdf files other than via a stiff monthly payment for Adobe software.
    At the moment, although I can't synch to my creative cloud account, I can export  PDFs of my Ideas files by email, which is what I do. I keep all my files duplicated outside Ideas. Unfortunately, the folders I created on CC for my existing files, which were synched to my Ideas app, cannot now be added to, or even deleted, though they can be renamed.
    I just wish I could somehow safeguard my version of Ideas so that I could transfer it to any future iPad I might buy.  It is so perfect for my needs I would pay for it ten times over if I had to rather than have to adapt to using the 'free' Draw.
    I bought idraw  as I thought it might be a good alternative to Ideas. It has great file storage, and the priceless ability to import and export vector files, but I found it insanely complicated. I haven't mastered enough to do a simple line drawing yet.

  • I keep crashing with Adobe Bridge. The data for the crashed thread has this line in it: CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION

    CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION
    That's in the crashed thread text. Does anyone know what this is about? I actuallly get this same error on three of the four Mac in my staff. It happens consistently when we use Adobe Bridge to browse to a particular folder on my external hard drive. I've copied the contents of that folder to my desktop and I get the same crash.
    Thanks,
    Peter

    Yes, I've been in touch with Adobe for the past two weeks. They only take it so far, then they just ignore me. The Bridge program is not a separate piece of software. It gets loaded when you install either Adobe InDesign or Adobe Illustrator.
    Thanks.

  • Adobe ideas crashing on iPhone6 plus?

    Having same problem with Adobe ideas not getting past opening screen!  Have important sketches to work on!

    Please see the thread Adobe Ideas IOS 8.1 Crashes
    Frank
    Ideas Engineering

Maybe you are looking for