Pairing Tour 9630 with Motorola H270 Bluetooth device.

I just purchased a Motorola H270 Bluetooth device and I can not pair it with my Blackberry Tour 9630.  When I try to enable Bluetooth on my phone, it does nothing and Bluetooth does not enable.

Joe_C, I was unable to locate your particular Bluetooth accessory in our pairing guide information. I have also included general steps below to attempt in resolving your issue and also our Bluetooth pairing guide link. 
http://www.verizonwireless.com/b2c/bluetooth
Step 1 - Enable Bluetooth functionality on the Blackberry Tour (9630).
Note: The Bluetooth power must be set to ON position to pair the device.
From the main screen, press Blackberry/Menu Key.
Scroll to and press Manage Connections.
Press Bluetooth (A checkmark in the Bluetooth field represents that Bluetooth is on.)
Step 2 - Put your fully charged Bluetooth headset into pairing mode.
Start with your Bluetooth accessory powered off.
Press/hold the Power button. The indicator light will initially flash
Continue to hold until the indicator light is steadily lit blue.
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset
Step 3 - Pair the Blackberry Tour (9630) with a Bluetooth Accessory.
From the main screen, press Blackberry/Menu Key.
Scroll to Set Up 
Press Set up Bluetooth
Place accessory in pairing mode. See accessory pairing instructions.
Display show Add Device: Press Search to search for devicesl
Phone displays Searching For Devices.
Select XXXAccessory NameXXX, press trackball to select
Phone displays Waiting For XXXAccessory NameXXX.
Phone displays Enter numeric passkey For XXXAccessory NameXXX.
Enter 0000 and press the enter key (See accessory instructions as passcode may vary.)
Phone displays Pairing complete.  Connect to XXXAccessory NameXXX?
Press Yes
Phone displays Waiting For XXXAccessory NameXXX.
Phone displays Connection to XXXAccessory NameXXX succeeded.

Similar Messages

  • I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

    I just bought a new 2013 Honda civic and my iPhone 4S won't pair with the cars Bluetooth device but it did on other people's iPhones; I have no other Bluetooth devices on my phone. Any suggestions?

    I have to ask,
    Are you making sure you are in park before attempting the sync?   The car won't allow you to do it in motion, whether or not you're the passenger.

  • HT204387 Cannot pair iPhone 5 with Toyota Camry Bluetooth

    I cannot pair iPhone 5 with Toyota Camry Bluetooth. Never had a problem with android

    Two things that you need to verify first
    1. The first step in troubleshooting any accessory is to determine whether the accessory is compatible with the device. Contact your automotive manufacturer or the manufacturer of your aftermarket head unit to see if your iPhone, iPad, or iPod touch model is compatible.
    2. Verify that both your car kit and your iOS device are running the latest software versions. To verify that your car kit is up to date, please contact your automotive manufacturer or the manufacturer of your aftermarket head unit.
    Also follow the Link. hope this helps.
    http://support.apple.com/kb/TS3581
    Regards,
    Taz

  • Cannot pair my E51 with my jabra bluetooth ear pie...

    I cannot pair my E51 with my jabra bluetooth ear piece.I have paired my wife's phone with my E51, but cannot pair my E51 with my ear piece. Any help would be much appreciated.

    sorry... the Bluetooth in the iPhone only works with a Hands Free Headset or Car Kit but not to another phone , not even an iPhone ..

  • TS3253 My Iphone 4S version 6.1.1 will not automatically connect to my bluetooth in my car.  It is paired and registered with the car bluetooth, but I have to select the device each time the car is started.

    My IPhone 4S with version 6.1.1 will not stay connected to the bluetooth in my 2012 Subaru Outback.  The phone is paired and registered with the bluetooth in the car, but each time the ignition is turned off the phone loses connection with the bluetooth and I have to select the device again.

    You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • Can i pair my BB8330 with more than one device at a time?

    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    Solved!
    Go to Solution.

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • Iphone 3G Problems with picking up Bluetooth devices

    I've been trying to pair up my Iphone 3G with a bluetooth device and it won't recognise it (or anything else for that matter) even though I've switched this capability on.  Am I doing something wrong and I've not used Bluetooth before?

    So tonight I successfully updated my iphone 3gs to ios4. Trying to be nice, I was going to update my dad's 3g after he went to sleep so he could wake up to the new update. no good deed goes unpunished.
    So I plugged in his phone and it told me there was an update available, so I sat and waited while it downloaded. Once done, it was automatically starting the update. It first said it was backing up the iphone (which took forever). Then, to my surprise, it said it was restoring the iphone software and firmware. I was scared but then it said it was restoring the music and apps, so i figured it was restoring everything it had just taken so long to back up.
    I waited and once it was done, the phone was updated with the new features but was back to it's factory settings. It had no contacts, no calendar events, no email was set up, no notes.
    However, it did have the latest photos if I am remembering correctly.
    So I frantically restored the phone to the latest back up, which I assumed would be from a couple of hours ago, but it turned out to be from January 17, 2010. I didn't sync the phone before starting the update because I didn't while updating my 3gs earlier, and all went well then.
    So now the phone has lost anything that was added to it after January 17, 2010. Including the recent pictures that were still on the phone when it was restored to its factory settings earlier.
    WHAT HAPPENED? CAN I FIX IT?
    if the phone spent so long backing up before the update then why isn't there a back up file for it?
    I am very desperate. my dad is a businessman who had a lot of important contacts and events stored in his phone. He wakes in 15 minutes at 5:00 am and I am just awaiting his anger when he finds a chunk of his data missing.
    please help me.

  • Warning: Z3c doesn't seem to work with many common bluetooth devices. No fix immenent?

    Hello. I just bought the Z3c as a replacement for the far-too-large Samsung Galaxy S5. 
    However, unlike the Samsung phone, the Sony fails to detect almost all bluetooth devices I've tried. In particular it fails to connect with my Jaybird Bluebuds X sports headphones, and a Bose speaker dock, both of which use an older bluetooth implementation.
    I believe this is a Bluetooth stack issue with Sony's 4.0 implementation, though please correct me if i'm wrong,
    Sony, any plans to fix this? Please address this for new or would-be buyers, many of whom have existing bluetooth devices and quite reasonably expect to use them when buying your smartphones.

    You might have a defective device or it needs a software repair because all I use for my music needs is Bluetooth and I regularly use the following without any issue:
    - Plantronics BackBeat Go2 (headphones)
    - Altec Lansing InMotion SoundBlade (portable speakers)
    - Bose SoundDock 10 (home speakers)
    - Sony XSP-N1BT (car stereo)
    - Sony MEX-BT2500 (car stereo)
    Additionally I have paired and tested the following devices:
    - Logitech K810 Bluetooth Keyboard
    - ASUS U47A (notebook)
    - a chinese Monopod (selfie stick with bluetooth)
    And the Z3C has been flawless so far regarding bluetooth connections... not even one dropout. My older Acro S used to have an issue that prevents the BT from turning on, and the switch inside settings would become grayed out until a reboot.

  • Activating BlackBerry Tour 9630 With Starhub

    I just bought blackberry tour 9630 but I cannot activate my set with starhub. Anyone in singapore using the set that manage to activate the set? Help is appreciated. Thanks.

    Is the device unlocked for use on all carriers?
    To determine if your BlackBerry is "unlocked" for use on carriers other than for which it is branded:
    1. On your BlackBerry, go to Options > Advanced Options > Sim Card.
    2. At that screen type MEPD (see note below) on your keyboard. A new menu will pop up.
    * If your BlackBerry has a SureType keyboard (71xx and 81xx devices) you will need to double-tap the P, so the actual keys entered become M E P P D.
    3. Look for Network in the list.
    4. If your device is "unlocked", it should say Disabled or Inactive. If it says Active, it's still locked to that carrier.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Trying to use the Tour 9630 with Outlook 2003 Calendar, Memo/Notes & Tasks. Can't Config & Complete....

    I would like to use my Outlook 2003 with my Blackberry Tour 9630 to use the Calendar, Memo & Task features instead of entering everything on the BB. I use my Outlook Express 6 for my email input and output. The Outlook 2003 is not connected to the internet for use but on my computer as a free standing application. Everytime I attempt to config the Desktop with Calendar, Memo & Tasks I get a "Option Values is unacceptable. Pls check options properties". I do pick MS Outlook as the application to connect but continuely get that message above when I am at the end of the config process at selecting NEXT. I would like to use Outlook 2003 if it is ok to use and connect. Or is there any other application that I can easily purchase for an easier connect and config too. Pls assist me. Ed

    Hello BklynBoy273 and welcome to the BlackBerry Support Community Forums.
    Have you entered any information into Outlook yet? 
    The BlackBerry communicates with the Outlook data folder, called a pst.
    KB02362 may offer you some help trying to get the sync configured.
    Let me know how you make out.
    Thanks! And have a great day
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HT204387 what is the bluetooth pairing default code to connect to bluetooth device (car).

    What is the bluetooth pairing code to connect to bluetooth device (car) for iphone 4 w 7.os

    first you must put your iphone in the discover mode by going to bluetooth on your phone which places it in discovery mode. Them you must go to your car's bluetooth discovery mode and place it in discovery mode. If the phone sees the car and visa versa, the car will give you a code to place into your phone. Once you put the code into the phone the two will be linked. Make sure that your car has "automatic" link set so that your phone will link every time you turn on the ignition. Refer to your car's manual for more help or go to your dealer, they should be able to help you or even do it for you, but you need to know how to be able to discover and then link bluetooth devices yourself because every bluetooth device uses the same discovery formula especially if you want to use your IOS devices to play music through your system using bluetooth.

  • How to communicate with third party bluetooth device using LAbVIEW

    Hi
          I am trying to communicate with a third party bluetooth device using LabVIEW, I am using a bluetooth dongle. I am able to discover the device and able to open the connection by specifying the service as serial port. But after that when I am trying to read and write data between LabVIEW and the bluetooth device (using Bluetooth Read & Bluetooth Write functions) its not happening.
    Dose anybody faced same kind of issue if so kindly guide me, this is first time I am using Blutooth protocol.
    Regards
    Visuman 

    Hi,
    I am able to talk with bluetooth / serial devices by using Labview protocol (not Wii dll). These are steps:
          Discover the bluetooth device in range (Bluetooth dicover.vi)
          Get the address of the device
          Pass device address to Bluetooth RFCOMM Service Discovery.vi to get service list
          Pass channel and uuid to Bluetooth open connection
          After that do write and read (Bluetooth Write / Bluetooth read).
      I hope it works for you.
    Take care
    tp
     

  • I was trying to pair my notebook with iphone3gs and i had problems with my internet connectivity,so the iphone gave an error message that should it ignore my pc, not thinking clearly i clicked ok.since then i couldnt pair my iphone with mypc via bluetooth

    Trying to pair my phone with my pc via bluetooth , had internet connection error .my iphone asked to forget about my pc and i clicked yes thinking i can redo the connection later but ever since, my iphone as refused to discover my pc .i have tried every thing i know but to no avail . can you pls help
    thanks

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Will isync work with a blackberry (bluetooth device)

    wondering if the isync will work with a blackberry that has a bluetooth device to transfer a word document from my powerbook G4 to the blackberry? I am also using OS Tiger...

    Pocketmac does not support syncing via Bluetooth.
    It also does not support file transfer. Blackberry devices do not have this functionality.
    Your solution does not address the problem faced by the OP.
    "if the isync will work with a blackberry that has a bluetooth device to transfer a word document from my powerbook G4 to the blackberry?"

  • UNlocked Blackberry tour 9630 with poor internet

    i just bought an  Verizon Unlocked bb tour 9630 off ebay and i  activated it online for Verizon wireless but the internet is very poor and on the top right of the screen it says 1XEV  shouldn't I have like 3G?
    Also on the top of the screen in the banner it says insert SIM card.
     What should to get better internet ? And do I need a SIM card?

    naseebraipur wrote:
    please provided unlock code PIN {REMOVED} MADE IN MAXICO
    BLACK BERRY 9630
    ETA 0090/2009/WRLD
    naseebraipur, you need to purchase your unlock code. See my link below, the Guide to Unlocking.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Newbie needs help with multiple devices?

    Hi and best wishes to all. I could really use some advice on the following. I purchased an iPhone and set it up on my PC in the normal way. A few months later, my Creative Vision battery died, and Creative's only advice was "buy a new one!". No chanc

  • Issue with Goods Issue.....

    Hi gurus, I am working on an interface where I need to do goods Issue and for this I have written the following code, but my return statement is returning this error" Goods movement not possible with mvmt type 201" data: begin of it_input_file occurs

  • Installing more RAM in Macbook Pro

    I know this question has been asked a thousand times before, but I want to know if my specific MacBook Pro model, bought in October 2007 can take 4GB of RAM? I know that some of the older MacBook Pros can only take 3GB, but I'm unclear as to whether

  • What's the problem in the this XML?

    Hi!! I changed only first line cleo.xml It is used DOMSample(XML parser for C v2) <?xml version="1.0" encoding="iso-8859-1"?> In line 1 of cleo.xml: LPX-00201: Message 201 not found; No message file for product=ORACORE, facility=LPX Parse failed, err

  • Easiest way: installing leopard on ibook

    hi, i got a ibook g4 (1.33ghz,1.25gb,cd-r/w) from a friend and im looking for the easiest way to upgrade the os to leopard. i found several ways in the inet, but none of them sounds quite easy or cheap (e.g. runninga tftp server, changing the interna