Pairing with MacBook Pro 13"

My iPhone won't pair with my MacBook Pro 13" via Blutooth. It says that necassary components are not in place but doesnt say if thats on the MacBook or iPhone. Both are up to date software wise and my specs are in my details below.
The MacBook displays a code which the iPhone displays too. I except and they pair for a beief period. Then it drops the ocnnection.
What is the problem here and what can any one else do with theirs?

I assume you've enabled tethering on your phone, correct?
Settings>General>Network>Tethering, on/off
Do you see a message like this on your computer?
"A network interface has been detected" After you've paired your phone.
If so, click on network preferences and select the adapter as displayed in the notice above, and you should see a blue banner on your phone when it becomes active.

Similar Messages

A1255 Wireless keyboard not pairing with macbook pro 10.6.5

Trying to pair my wireless keyboard with macbook pro but it's not pairing.
What i did is :
System Preference -> Keyboard -> set up bluetooth wirless keyboard
my keyboard appears for a moment and the i goes off.
it says 1 keyboard found then keep searching and suddenly no keyboard found.
Any help is appreciated.
Cheers

Hello H:
These forums are not chat rooms, but since you used my name I will address your post.
Do you work for Apple?
No. These are user-to-user forums. The forums are moderated by Apple, but do not represent official responses from the company. If an Apple employee would post here (very rare), they would have either a purple apple (forum host) or a silver apple (employee) under their name.
Every post about this issue, going back to early 2009 you have made the SAME suggestion. It doesn't work.
That statement is inaccurate. If you read the posts carefully, I do not cut/paste the same suggestion to address issues. However, trying to address issues without hands-on access to devices necessarily requires one to suggest solutions that have worked in similar situations. Bluetooth issues are not rocket science and there are only a few things that are available to resolve problems. If you look at the little blue bars next to my name that represent user +"thank yous+" for suggestions that worked, I must have made a few suggestions that did work.
Like everyone else that tries to help others here, we are unpaid volunteers. If you have better sources to obtain information, I certainly recommend that you seek those sources out. If you have issues with Apple, take them up with the company. Ranting here about your particular problem is not helping anyone.
Barry

New Magic mouse just paired with Macbook pro but will not scroll

I have a MacBook Pro that has never been bluetooth paired with anything. The magic mouse and computer pair and it shows everything is ok, but the mouse doesn't scroll. If I physically move it it will click, but otherwise it does not respond. I updated all of the software and have OS 10.6.8. Any suggestions?
Thanks

Look in System Preferences > Universal Access > Mouse Check scrolling.
Regards,
Captfred

Actatel 871 cellphone won't pair with Macbook Pro using system 10.0/4

I have a 3 month old Macbook Pro that came with Maverick on it (10.9.4) and I am unable to pair it successfully with my Actatel 871 phone which works perfectly with my iMac using system 10.6.8. It will look like it's pairing, then when I send a picture from my Actatel 871, it says "unfinished" And when I try to connect with bluetooth, it says "connection failed". Yet I can send a file from my computer to the phone using bluetooth.
My husband's Pantech Swift would not send a photo either but I figured a way around that which does work on the Actatel 871. If I open my bluetooth file exchange, do to the "file" menu, I can pick "Browse device" and that way I can get photos off his phone. When I try doing that with my phone, it says that my device is not set up for that. Using the iMac with system 10.6.8 is so easy to use, you just send the files from both phones and they arrive on my computer.
Does anyone know if the Maverick is not compatible with some phones that were compatible with 10.6.8? Or perhaps I'm doing it incorrectly? Has anyone else had a similar problem?
Thank you, Martha

Hi mflembeck!
Thanks for posting!
I would like for you to check over a few things that will help me determine what is causing this.
What specific version of EOS Utility are you using?
Are you using the old configuration on the camera or have you tried forgetting those settings and starting a completely new setup?
Also, just to be sure, do you have an ethernet connection to the Macbook at the same time as you have the wireless connection?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Pairing with MacBook Pro not working

Hi
I was able to pair my iPhone with my MacBook Pro months ago (for tethering purposes), *but now it stopped working*.
Each time I try to pair it, Bluetooth Setup Assistant asks me to insert the pairing number in my iPhone, but I never get to see the alert on my iPhone asking me that number, so, minutes later Bluetooth Setup Assistant shows me an error message: "The pairing attempt was unsuccessful(...)"
Screenshot: http://dl.dropbox.com/u/400002/bluetooth.png
Info:
- iPhone 3G with OS 3.1.2
- MacBook Pro (early 2008) with OS X 10.5.8.
- Tried resetting iPhone, switched on/off Bluetooth, switched Tethering on/off too.
- Tethering by USB doesn't work either. (Doesn't show any new network device)
- Successfully paired my iPhone with a Renault Space, so it's not a hardware error (i think).
Any suggestions here?
Thanks!

check to see if the iphone thinks it's already paired to the computer. if so, delete the pairing from the iphone and try again. If no change try rebooting the iphone. make sure the iphone is close as possible to the display hinge of your computer. The iphone should display an alert saying your computer want to pair, confirm that and then click continue in setup assistant on your computer.

Thunderbolt has stopped working with macbook pro

Thunderbolt display paired to macbook pro and working fine.
Turned off Macbook to go portable. When returned home plugged n Thunderbolt to Mac - there is no activity at all on Thunderbolt display. No changes to set up were made.
Any suggestions?

I've the same set-up as you have and I'm not having the problem that you describe... 90% of the time I'm at my desk with the Thunderbolt Display plugged in and 10% of the time I'm running on battery.
The only thing that I can think of is that - possibly - you're plugging in the Thunderbolt cable before you plug in the power supply cable? If it's not that then I would contact Apple Support.
Good luck,
Clinton

Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?

Does the Apple remote control work with MacBook Pro with retina? If yes, how can I sync it?
Thanks!

It should. First, turn on BlueTooth on the computer. In BT preferences be sure to check the option to look for all devices. Your remote should be picked up and a notice asking if you want to Pair it with the computer. Select Yes. Once it is paired it can be used to control your computer.

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

How can I restore data from my iPhone after sync with macbook pro?

I accidentally syncronized my Iphone with MacBook Pro on iTunes and lost all data from my phone (calendar, contacts, photos, etc.). Is there a way to recover that information? Thank you!

Welcome to Apple Support Communities
You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

External hard drive compatible with macbook pro 10.5.8

external hard drive compatible with macbook pro 10.5.8, i need a hard drive that will work with 10.5.8 to back everything up before upgrading to 10.6. a hard drive that is compatable with 10.5.8 has been impossible to find, a hard drive that works with both opperating systems is what i am looking for, any information that can help is appreciated

You can buy just about any USB2.0 hard drive and use it with your MacBook Pro. Many older external drives come pre-partitioned and formatted FAT32 for use on Windows. Your Mac can use that file system as well, but it has limitations on file sizes. You can always re-partition your external drive and re-format it as HFS+ (MacOS Extended Journaled) then your old Mac OS version and your new one should both be able to access it just fine. One thing to keep in mind is that many older OSes don't really handle drives larger than 2TB well, so you would probably want to try to keep your external drive to something smaller than 2TB...

Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
Have searched Adobe website for answer - most recent is 2013 answer, saying no.
Contradicted by a staff ember who only referred to Photoshop, not Elements.
Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
Help, please...

Hello Smis,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices? recent problem starting March 1, 2015.

I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise. As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600.
On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's. Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date! but sadly stays on LTE.
Have tried resetting, replugging etc...
Also, tried checking on updates. Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
A mystery...

Reset the TC to factory and redo the setup. see details below.
Here is the typical list of things you should try.. and if this doesn't help post again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
How is the TC connected into the network? What function does it have? Router or bridge for example.
Post a few screenshots of the setup.

I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling

What is the best external hard drive with MacBook Pro

What is the best external hard drive with MacBook Pro?

I agree with Allan, and that link is also called OWC, their hard drives are great. Have three of their Mercury Pro Elite 2 TB quad interface drives. They will connect eSATA, Firewire 800 & 400, USB2, so broad reange of options. Drives seem to come Mac HFS formatted, but I always reformat and partition the drives. Service and quarantees are top notch.
They offer a wide range of drives/drive systems so like Allan said, spend some time seeing what the have.

Is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

is it easily possible to synchronize mails sent from iphone 3GS with MacBook Pro retina

Read through this:
http://clients.websavers.ca/whmcs/knowledgebase/115/Keeping-your-Sent-folder-in- sync-across-devices.html

Pairing with MacBook Pro 13"

Similar Messages

Maybe you are looking for