PAL Beta SP / DigiBeta Settings from an HD project

I have a project that is currently 1920x1080 and needs to go onto a PAL BetaSP tape. What are the optimum Compressor settings for this project?
Thanks!

Try kenstone.net

Similar Messages

  • Can I transfer settings from one indesgn project to another?

    I am working on a (full color) newspaper - This is my first issue - taking it over from another design company which could be backing up future issues so I'd like to keep my settings exactly as theirs were (I have the last issue InDesign file) so that when they do have to layout the paper again there'll be no confusion.  Thanks!

    You can probably delete all but the front page, and perhaps one inside spread (depending on how the master pages are set up). I personally would set up a newspaper using a single page master for the front page, and a two page master for a the basic inside pages, possibly some additional masters for alternate column arrangements if there are any in  use, and so forth. Masters should have the page headers and other "static" content (you might, for example, have masters for section pages like Metro, Editorial, Sports, and so on so you don't have to set all of that stuff up each time), but that doesn't really mean much. The way I work and the way others do things can vary widely. I worked for a newspaper once that used the same file week after week, dleting the stories and ads that weren't going to run, then adding the new content. In my opinion that's a workflow that always ends in disaster with the edition melting down at deadline, but it's pretty common.
    One of the best things you could do for yourself is invest in some training. If you like online training, Lynda.com is probably the the best you'll find for ID. Sandee Cohen's Visual Quickstart book is about the best you'll find for a beginner written text. Real World InDesign by David Blatner et al is the best advanced book I've seen (and I 've looked at a lot of texts -- I taught ID at the college level for a bit).

  • How do I move settings from one Airport unit to another?

    I am considering buying one of those new Airport Expresses, the one with dual band. I have a few questions about importing the settings (from my existing Extreme unit):
    - Is it true that it's better to start from scratch when setting up the new unit (vs. importing the settings from the old), because the performance will be better?
    - Assuming I do import: Won't there be a problem where, even for a short time (that is, until I deactivate my old unit), I'll have two Airport units with the same settings running simultaneously? What should I do about that?
    - How do I reset my old unit to its factory settings so I don't have my network name and password still stored in it?

    I always prefer to factory reset. Never bother with importing, and when I do it didn't always work right for me anyway.
    To reset the router to factory defaults, hold in the reset button as you plug it into the outlet. Keep holding the pin down until it flashes amber rapidly.

  • Can I import settings from CS5's Live Trace to CS6's Image Trace?

    I'm loving CS6 Illustrator, except for one thing. Image Trace. Here, Adobe seem to have taken away the two most usefull settings from Live Trace, and replaced all the presets with ones that are pretty much unusable. I almost always used either 'Comic Art' or 'Lettering' to trace hand-drawn images, but they're both gone. None of the new settings are good enough, even if I make a custom one. The main issue is that the sliders in Image Trace are for completely different things to those in Live Trace, so it's difficult to translate one set of settings into the other.
    With Image Trace, I cannot get the same results as with Live Trace, and so far, have found myself having to have Illustrator CS5 open at the same time as CS6, just so I can get workable traces.
    I don't know if it's possible, but is there any way to import the presets from Live Trace, or even the full tool, into CS6, to replace the new Image Trace presets?
    If not, does anyone know how to make the equivelant of Comic Art  in Image Trace's new settings?
    Images, to help define the problem: This is a close up of a file I was trying to trace, showing the major difference in quality between the two CS versions.
    Left: CS5 - Comic Art setting.
    Right: CS6 - This is a custom setting, but is the closest I have come to Comic Art thus far.
    As you can see, the definition of Image Trace is far lower in quality than Live Trace, giving me one large connected blob of colour rather than the distictly separate lines produced in Live Trace.

    I can't show the original as it is a HUGE file, 10000 pixels wide. I scan as high as my scanner will go. And that 10000 is shrunk down already so as not to exhaust my RAM. Below is a smaller version, but yes it is a b/w drawing but on a colour scan. It's been treated using Levels in Photoshop to remove the grey/blue colour of the paper, but nothing else.
    I can see round the edges of the black in Photoshop that there are bits of colour, mainly reds/yellows. What do you think I need to do to it to help it trace better?
    Actually, I'll throw in my Image Trace settings too, so people can see what settings I'm currenty trying... I got the Threshold directly from Comic Art in CS5.5.

  • [Bug] Pasting develop settings from P2010 to P2012 reset sliders

    I may have found a nasty bug.
    I wanted to show how amazing is the new clarity slider between two versions of the same image, one with Process 2010 and another with the new one.
    Realizing that I slightly changed color between the two (white balance for sure and maybe some other color treatment settings), I decided to copy those two settings from the P2012 one and paste on the P2010 one.
    1. Copy settings from the fist image
    2. These are the settings for the P2012 image
    3. These are the settings of the P2010 version BEFORE pasting settings from the newer one
    4. These are the ones AFTER the paste.
    Basic settings have been reset just by pasting White Balance and Treatment (color).
    Process version was set on 2012 without asking to do so.
    You can get the same result even by copying the White Balance alone, which is not a P2012-dependent setting.

    Lr 4 Beta always syncs process version when doing a sync. When syncing a 2010 to 2012 image, the Basic panel settings will be converted. This is the reason why this is happening.
    That said, we're investigating more fine-grained approaches going forward.

  • Importing development settings from JPG

    Hello everyone,
    I have a JPG file that I've created in Lightroom from a RAW file.
    My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
    Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
    Thanks for all of your help in advance,
    Dan

    Hey Dannyboy,
    Dannyboy103 wrote:
    I typed exactly what you wrote when you suggested I use the exiftool.
    Right. I since amended that on Phil Harvey's recommendation, but to be frank, I don't understand it all perfectly, so bear with me.
    Dannyboy103 wrote:
    To your question, if I have the same settings tools - the Temp starts with 0 and can move between -100 to +100.
    This is what's known as "incremental temperature" adjustment, not raw (kelvin), i.e. standard baked rgb file (e.g. tiff, jpeg).
    Dannyboy103 wrote:
    The other profile calibrations are the same.
    I assume you mean sliders. What's on the camera calibration profile drop-down menu?
    Dannyboy103 wrote:
    I noticed that when working on a dng file, there is a slight change in the calibration profiles (no "white or "highlights" and there is a "fill light" option. Maybe other changes, but haven't really taken a real close look at it).
    fill light is for photos utilizing process version 2010 (or 2003), i.e. legacy process versions. whites & highlights are for PV2012 photos (current process version).
    Dannyboy103 wrote:
    Why do you think that having the lens correction option available is a bad thing?
    Using profile-based lens corrections is a bad thing if baked rgb file (e.g. tiff, jpeg) already has lens corrections applied, or is cropped... Such is the reason Adobe does not support profile-based lens corrections for rgb files, only raw files.
    I'm guessing you weren't actually using profile-based lens corrections on your tiff, right? e.g.
    As I said, it is possible to finesse metadata such that raw (profile-based) lens corrections can be applied to rgb files, but one needs to be careful, since it could make things worse instead of better (e.g. applying lens corrections when already applied, or applying them wrongly due to crop). I thought at first this is what was happening to you, but I think now I was wrong - what do you think?
    Rob

  • Forcing cluster objects to inherit precision settings from parent model

    Attached is a picture which explains this. Heres my problem:
    I have a bunch of controls (the ones with the issue are numeric doubles). They are wired into a bundle by name to create a framework for my cluster. When I initialize an array of this type of cluster, the numerics do not receive the precision settings from the original controls that were bundled. Is there a way to specify this? I have tried strict typedeffing the original controls with no luck.
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    clust.JPG ‏48 KB

    Attached is a better example
    Attachments:
    clust2.JPG ‏23 KB

  • How can I migrate my junk-mail settings from one Mac to another?

    I would like to move my junk mail settings from one Mac to another. I found this article (https://kb.siteground.com/how_to_synchronize_the_junk_email_settings_in_mac_mail /), but can't locate the file indicated in the article, so I suspect that the article is out of date (though it's not dated).
    Both machines - MacOS 10.9.5; Mail 7.3.
    Any insights much appreciated!
    Best,
    Doug

    Make your user library visible and see if you can find it.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library.

  • Cannot send nor receive email on new iMac; migrated settings from MacBook

    I just recently bought a new aluminum iMac. I migrated files & settings, including Mail settings from my MacBook to the iMac. Despite the copied settings, I cannot send nor receive messages on the new iMac. I have always been able to send & receive e-mail on my MacBook, so I would think the same settings should work on the iMac.
    I have tried Connection Doctor, and I am getting successful connections on both the POP Account and SMTP server.
    I have compared settings between the MacBook & iMac, and they are the same. My MacBook uses Tiger and doesn't have the option of default & custom ports. It is set to port 25. I have tried custom ports of 25 & 587 on the new iMac as well as the default port option. None of those seem to work.
    Is there something else that could be wrong or anything else I can try? Thanks ahead of time for any assistance.

    This might work:
    http://support.apple.com/kb/TS2537

  • Why is it so chaotic to Sync Settings between apps of Adobe CC 2014? (and to transfer settings from CC to CC 2014)

    Although, in general I'm a big fan of the Adobe Products and the CC Idea, I think that some parts of it were not ready for launch.
    The part that mostly disturbs me is the settings syncing / Update. (Or "Seamless Update")
    Concerning the updates:
    I had own workspace in all the CC Adobe Apps, the only CC 2014 App that imported the previous settings in the new app at the first start was Photoshop.
    Indesign made it through the Edit => Migrate previous local settings
    Illustrator by copying the settings files manually
    in Dreamweaver and Flash I had to recreate the workspace manually (which finally took less time then trying  to sync settings.)
    So long for the Seamless update that wasn't so seamless.
    Concerning the settings syncing
    Why could'nt adobe have the settings syncing working the same way in all it's CC 2014 applications? ( File Menu on PC / The Name of the App Menu on Mac => Sync Settings, upload or download settigns; done!)
    Instead (on mac) :
    In Photoshop: Photoshop => my account name => upload and download settings ( and no way to import settings from previous version )
    In Illustrator: Illustrator => my account name => Sync Settings ( and I cannot import settings from the previous version, only from the same version )
    in Indesign: Indesign => my account name => Sync Settings ( and the only CC 2014 App where the "Migrate previous local settings" function is working )
    in Dreamweaver => my account name => Sync Settings and a button on the far right of the upper toolbar (and no way to import previous version's local settings)
    in Flash => my account name => Sync Settings and a button on the far right of the upper toolbar (and no way to import previous version's local settings)
    in Premiere Pro => my account name => Sync Settings with the possibility to clear settings and to use settings from a different account
    Appart from that update and syncing chaos, the syncing between two computers simply doesn't seem to work ( at least for me).
    I have a computer at work and a laptop at home and I'd like to have the same workspace in my apps at home as at work for occasional home working.
    I created and configured my custom workspaces on the mac at work and then synced settings (respectively uploaded them in Photoshop). I had cleared all the saved settings from the Creative Cloud online account first.
    I arrived at home, tried to sync settings but no workspace was implemented. (and before you ask, yes i had checked that the workspaces should be synced and that, on the laptop at home, the cloud settings should be applied.)
    After few tryings I gave up and ended up recreating my setings on both machine. Frankly I don't know why the sync settings are for, since they just don't seem to work.
    I really think you should rethink this feature: make it simpler, working THE SAME WAY in all Adobe apps, and, well, just working!
    I'd just like to log into creative cloud an any computer, sync settings, and be able to use my custom created workspace.
    I posted this in the Cloud Forum since, in my opinion, the settings syncing is a cloud matter and not a matter of each app individually.

    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests
    Error: "Unable to sync files"

  • How can I get all the settings from weblogic.properties ?

    Hi, and excuse me for my poor english.....
    I have a T3Client and I want to obtain all the settings from weblogic
    properties...
    With the sentence getT3Services().config().getProperty("......"), I can
    obtain the property, but my problem is that at runtime, I don`t know
    established names....
    I want to obtain something as the AdminProps servlet, but with a non-web
    client.....
    Can anybody help me ?

    Hi, and excuse me for my poor english.....
    I have a T3Client and I want to obtain all the settings from weblogic
    properties...
    With the sentence getT3Services().config().getProperty("......"), I can
    obtain the property, but my problem is that at runtime, I don`t know
    established names....
    I want to obtain something as the AdminProps servlet, but with a non-web
    client.....
    Can anybody help me ?

  • How to retrieve print settings from .rpt file?

    I have crystal reports 10 report file, in which I edited the printer settings... collate and number of copies(2) and saved it.
    now i want to print it from VB6. I am using a customized print dialog form (not using the common dialog control)
    I want to get the collate and number of copies settings from the rpt file. how can I get those details. any API available?

    Hi Samkar,
    It will look something like this:
    crReport.SelectPrinter "pscript5.dll", "HP LaserJet 8150 Series PS", "LPT1"
    crReport.PaperOrientation = crPO
    crReport.PaperSize = crPSS
    crReport.PaperSource = crPSR
    crReport.PrinterDuplex = crPRDPDefault
    crReport.PaperSource = crPRBinEnvelope
    Depending on the version you have depends on if the function is available. It may be that 10 did not h ave the Papersource member.
    Thanks again
    Don

  • How to transfer user settings from one account to another (on the same Mac)

    I'd like to create separate user accounts for "work" and "play" (so that I can do things like have separate address books, etc...). However, I already have LOTS of personalized settings (trackpad behavior, login items, etc) that I'd like to keep the same between the two accounts.
    Is there a way to transfer all of the user settings from one account to another?

    You'll need to copy your /Home/Library folder. Make sure you back up first before doing the following. Log out of both your Work and Play accounts. Log in to a third account with administrator privileges. Assuming you are copying from the account called "work" to the account called "play", enter the following in Terminal:
    sudo rm -rf ~play/Library (this deletes Play's Library folder.)
    sudo cp -R ~work/Library ~play/Library (this copies Work's Library folder to Play's folder.)
    sudo chown -R play ~play/Library (this fixes permissions of Play's new Library folder.)

  • How do I use Migration Assistant to get my Mail and Keychain settings from

    How do I use Migration Assistant to get my Mail and Keychain settings from my Power Mac G5 2.3Ghz? I just purchased a new 2.5 MacBook Pro which will be delivered tomorrow, and I want to to know how to transfer Mail and Keychain?
    Thank You in advance for your reading and replying.
    Kindest Regards,
    Sebastian

    Rather than using Migration Assistant, which can cause trouble with the PPC to Intel change, simply boot the G5 in FireWire target disk mode and manually transfer the following:
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/com.apple.mail.plist
    You might want to look over Kappy's helpful guide for migrating, which covers the full process for a manual migration (including the above files).
    Hope this helps...

  • How do you move Compressor 3.05 settings from one Mac to another?

    How do you move settings from one Mac to another?
    I have Compressor 3.05 installed on two Intel Macs: a MacPro tower and a MacBook Aluminum. I created a new setting on the MacBook, and can see it in Library -> App Support -> Compressor as "<name>.setting" Then I moved to the Mac Pro for speed and created a few more settings. I copied these settings from the Mac Pro libary and put them in the MacBook library; restarted Compressor on the MacBook but still cannot see those presets from within Compressor. I hate to re-create all those settings, but I do move between both computers depending on what I am doing.
    What am I missing? Thanks.

    To copy single settings.
    1. Drag & Drop your setting from the Compressor Settings window to i.e. the desktop
    2. Copy .setting file to an other Mac
    3. Drag & Drop the .setting file(s) over to the Settings window in Compressor
    To copy settings groups (folders)
    1. Go to */Users/yourusername/Library/Application Support/Compressor*
    2. Copy the settings group folder you want to your i.e. the desktop
    3. Make sure Compressor is not open on the other Mac
    4. Copy the settings group folder to the same location on the other Mac
    5. Open Compressor
    Hope this helps
    Message was edited by: jeffd55

Maybe you are looking for