PAL D1 preset DV Output issue with CS6

Hello all,
I'm using PPro CS6 and a PAL DV25 D1 preset sequence. When I try to output to a DV device (either Print to tape or directly from the timeline) whole video plays with reverse fields (assets captured with the same preset from a DV device).
All settings were same as with CS5. When i choose to reverse field dominance (upper field) the video plays ok, but this is not normal.
Anyone had the same issue? Any workarounds?

Yeah. I've test CS6 and have the same bugs. Video looks like reverse fields and blurry (like your beach-video, and like in this post http://forums.adobe.com/thread/1019730 ). But after exporting to DV-AVI PAL file and autoring vs Encore CS6 quality is good: correct fields order and cristal clarity (controlled vs CS2). Updating of Premiere to 6.0.2 not correcting these troubles. This bug affects only to preview and export to DV-device through IEEE-1394 (Firewire) and making unable control of video quality on CRT TV-set/monitor and exporting of video to DV-tape. In the Program monitor there is allright and Cuda working good. And not depending wherewith video was capchured: Premiere Pro CS2 on XP or CS6 on W7.
Tested on harware: Phenom II x4 955, 8GB RAM, GTX560 (but vs Mercury Playback - Software only, switching on of Cuda make more troubles to monitor), video camera Panasonic NV-GS500; System - Windows 7 Pro x64 SP1.

Similar Messages

Pen pressure issues with CS6

So, I'm having an odd issue with my tablet and its pressure sensitivity with CS6. I've got a Genius MousePen tablet; M508W model. I can use it on my mac computer with photoshop elements; pen pressure works just fine with it. In CS6, when I do the stroke preview for all of my burshes, it shows the tapering-- as well as in the brush settings. When I go to make an actual rush stroke though, it doesn't apply the pressure settings. I've got the most recent drivers for the tablet downloaded, All of the old driver software was uninstalled, I've made sure that the drivers are for my version of windows, I've tried setting the compatability back to windows 7 and using the windows 7 drivers, but STILL nothing. The only reason I'm lead to believe that this is an issue with CS6 is that the tablet works with PS Elements just fine. If anyone could help shed some light on the situation, I'd greatly appreciate it.

I am having a similar issue.
Working in CS6 on a Cintiq Companion.
Pressure sensitivity disappears while I'm working.
The only way to get it back is to quit out of Photoshop and relaunch.
The pressure sensitivity works fine in Autodesk Sketchbook.

I just had another issue with cs6 locking up.

I just had another issue with cs6 locking up. This time, I was in cs6 beta working on an image, I went to file/open to open another existing file in photoshop, and when the finder window popped up to select a .jpg to open up, the cursor wouldn't respond to the finder window that was opened up, and I couldn't close it out, and I had to force quite cs6.

If I'm reading this correctly, your last kernel panic (that's what these are called) occured six months ago. Is that correct? It probably does not have anything to do with the number of windows you have open; I suspect it has to do with one of the third party kexts or non-apple hardware. My guess would be something with parallels (is the software up to date?), but if you're only getting panics at 6 month intervals it's really hard to diagnose.
Kernel panics aren't fun, but they aren't the end of the world. make sure you keep regular backups, and if you can figure out how to replicate the panic at a more frequent interval we can figure it out.

PS CC running extremely slow... No issues with CS6...

Same system... CS6 runs perfectly fine, close it, then load CC, not even workable. Close CC and reload CS6 and it runs fine...
Is CC really that much more hardware dependent? I feel like the issue is software related and has nothing to do with my machine... My Machine isn't some kind of powerhouse, but it does have 8gb of ram, and again, no real issues with CS6...

I am having this same problem and can't figure out what is going on. CS6 runs excellent, CC is unbearable. two second delay on almost everything. It is unusable.
Windows machine:
-Windows 8
-Intel i7 970 3.2GHz with HyperThreading
-Solid State main drive (C drive)
-12GB RAM
Any suggestions?

HT6030 Sound output issue with Mavericks

There is a sound output issue with Mavericks and Firewire800 Audio devices. I am using a MIO 2882 but now people are having issues with other devices as well. Is this something that will be addressed in an update? If not I will need to downgrade my OS.

maybe the adapter went bad.....fast. try getting one thats made by sony. or apple. i have had bad luck with some cheap products i bought.
or maybe thats the brand you have ad luck with. i remember when i use to get some quantom fireball drives, and they just died on me the next week. im down to two and keeping a good eye on them. especially fujitsu. the only ones i have GREAT LUCK with are Seagate and Western digitals drives.

Issue with CS6 Image in CC

Has anyone come across an issue with opening a CS6 file with luminosity, and other effects applied where when you open it in CC it drops most all the effects? Any solutions to this? I still need to be able to manipulate the artwork in CS6 and CC and allow others to open it but am concerned that the effects are dropping off. When I opened it in CC the artwork was completely changed due to colors changing and effects disappearing.

I don't have a direct answer to your question, as I still run CS6, but I do read this forum daily and I don't remember seeing any other complaints about your problem.As hard as that might make it for you to get substantive help, it might lead to a better understanding of the problem if you restate it with more specific details and better attention to your terminology. Here's what I mean:
Issue with CS6 Image in CC
Thread title says "image," which is a term most commonly applied to raster images as opposed to native Illustrator vector art. Nothing else in the post makes it clear whether your problem pertains to raster images, vector graphics, or both.
..with luminosity, and other effects applied...
Some ambiguity there too. Luminosity is a Blend Mode, whereas Effects are really something different. Again, it's not clear whether your problem pertains to Blend Modes, Effects, or both.
When I opened it in CC the artwork was completely changed due to colors changing and effects disappearing.
This sounds like a particular instance involving a particular file, but it's not clear whether your problem pertains to just one file, or several, or all. It would really help to post a detailed description of one instance, including the file contents, any/all Blend Modes and/or Effects used, and specifically, which ones drop away and exactly how it affects the outcome.

Issues with CS6 and Adobe Application Manager

When trying to open an Adobe CS6 application, a crashing loop begins. The AAM opens and closes once per second in the Dock, along with the application I was attempting to open. Because of the constant open and closing of these apps, it's almost impossible to get the mouse or keyboard to focus for enough time to do a force quit on either application, and a hard reboot is usually required to break out of the cycle. I had the entire suite uninstalled and reinstalled, but several weeks later, the issue resurfaced.

There was an issue with the serialization file created.
Creating a new serilaization file via AAMEE and running it resolved the issue.
Create a serialization file via AAMEE: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v_3_1.pdf
And then run it via command line.
Here are the steps:
AdobeSerialization (serialization file created using AAMEE 3.1) is not a double clickable file. You need to run it via command line to serialize the products. the command line is -
AdobeSerialization --tool=VolumeSerialize --stream --provfile=”Absolute_Path_of_prov.xml”
where
--tool=VolumeSerialize: specifies that the tool needs to process the prov.xml file to serialize.
--provfile” specifies the absolute file path to the prov.xml file,
By default, the tool looks for the prov.xml file in the same directory as the executable file and so
typically you do not need to specify this option. (Specify this option only if the prov.xml file is in some
other location.)
Make sure you invoke command prompt with Admin privileges. Return code of zero means success.
Tiffany can you please confirm the same?
-Pragya

Fix for WebHelp output issues with IE 11 breaks Search function

I use RoboHelp HTML 9 and have been having issues with generated WebHelp in IE 11. The TOC was totally blank and the Search tab looked fine but did not function. Everything worked fine in Firefox. After much experimenting and online research in these forums and elsewhere, I have been able to get the TOC to display properly in IE 11 (and Firefox) but the fix has caused the Search tab to stop functioning as per this other forum post RH9 Webhelp Search function is not working properly.
I need to have BOTH TOC and Search displayed and functioning properly but in order to get the TOC displayed properly I had to change the Preferred Format setting to "Pure HTML" and, according to the post mentioned above, that is what messes up the Search function. Is there a solution that will allow both TOC and Search to function properly?
Here is a summary of the steps I have taken to get to this point:
Tested WebHelp output from two different projects of my own as well as the Salesbuilder starter project - all would display/function properly in Firefox but not in IE 11 (blank TOC and non-functioning Search).
Found a "patch" for RH10 for the exact problem I was having with RH9 but was not able to find a version for RH9. Since the patch included 2 files (whutils.js and whver.js) only, I backed up these files in the RoboHTML\WebHelp5Ext\template_stock directory and replaced them with the new ones.
Regenerated one of my RoboHelp projects - still didn't work in IE 11 and now didn't work in Firefox either!
Tried turning on Mark of the Web but this did not help and would not allow opening PDF's which is necessary to one of the projects so I turned it off again.
Changed Preferred Format setting to "Pure HTML" instead of "DHTML" and the TOC displayed and functioned properly in IE 11 and Firefox! Hurray!!
Celebrated for 10 seconds until I clicked on Search tab and saw the input box filled with letters of the alphabet with other random letters, words, numbers below. It looks almost like an index but neither of my projects uses an index and I have not generated one in either project.
Found the post mentioned above which states that the solution is to change the Preferred Format setting back to DHTML but when I do that I am back to blank TOC and proper-looking but non-functioning Search!!!
I have now removed the Search tab from the output of one of the projects since it is not really necessary but I need to find a fix for this for my other project.
Both of my projects are run locally - one is release documentation that is distributed on a CD and the other is CSH which is loaded on the local server with the software for which it was created.
Dorothy
Note to Administrators: Sorry, but I originally posted this as a reply to a previous post - Contents, Index, & Search do not display in generated help... - so perhaps it should be removed from that thread to avoid confusion.

The "preliminary" fix provided has worked perfectly! All versions of my WebHelp project now display TOC properly and I was able to change the Preferred Format setting back to DHTML so the Search tab both displays and functions as it should. I am very grateful to William for providing this fix which works in both IE 11 and Firefox. Someday I will pursue the fixes to make it work in Chrome as well.

Known issues with CS6

Does anyone have a list or a url of known issues for CS6 - specifically - Illustrator, InDesign, Photoshop and Acrobat.
Work in OSX Lion
I am up to 50 views with no response - so I'll change the question.
Is anyone using CS6 on OSX Lion experieincing any issues?

Jeff has provided the generic artcle of the issue of the Adobe product with the Mac Lion
However find the link below for the Indesign and Illustrator sepcific known issues.
Indesign
Illustrator
If you want to find the Known issue of other application look for the Release Notes , Ex:- Indesign CS6 Release Note , Illustrator CS6 Release Note etc

Saving issues with CS6

Is there an issue with saving in InDesign CS6? I keep trying to want to "Save" after I make a slight change and the software keeps trying to "Save As" and create a new file. I will not allow me to save over the old file and it's annoying the hell out of me.

No 3rd party plug-ins. I don't have any utilities running in the background.
The read only issue I think is the reason. I'll check on it and get back to you on what I find.
If this is the cause, then would this be a bug with ID? Why would a file I created on an accessible drive on my desktop or server open up as a "Read Only"?

How to fix issues with cs6

I bought the master collection of CS6 and its been great on my mac OS X Lion but recently I had to download the new OS X Yosemite and ever since then I've been having issues with my programs. I use Photoshop CS6 the most and now its been so hard to even work because hot key commands don't work half the time and other little things have made working on the program almost impossible. I don't know if I need to re-download the programs or what.

Did you install the WhiteWindowWorkaround plugin to work around several known MacOS issues?

CUDA Issues with CS6 Mac

All,
I'm currently having a really big problem with my Mercury Playback Engine and CUDA support.
I'm running 10.6.8 with a GTX285 graphics card.
After a long time getting the card to initially start working with CS6, I came across the current problem. I have to switch CUDA drivers every day. Basically, if the computer is restarted, I have to load the CUDA drivers from NVIDIA back onto the machine.
I've been flip flopping between 4.1.29 and the most current version. I can't seem to find anyone having this problem and the computer is starting to have performance/rendering problems after a week of doing this trick.
Any help would be appreciated.
Ryan

This sounds like a problem within OSX rather than Premiere Pro. It's hard to know what the problem is without more information, which I guess you don't really have.
When you go to System Preferences and click on the CUDA button (usually bottom row) what driver version and GPU driver versions does it say?
Have you tried completely uninstaling the drivers from your system and installing them from scratch?
We're runing with a GTX285 and not seeing these problems, so it almost has to be a system configuration problem.

Output issue with Matrox MXO2 Mini

Hi folks,
We have just installed AE CS5 working on a new PC at work. it has an output to a PAL or HD broadcvast monitor via the Matrox MXO2 Mini.
If there are transparent parts of the image it shows an unexpected result.
For instance, if you have the comps BGND set to red then have a white solid with a star shaped mask on it you see a rectangular white shape on the monitor with odd black pixels around the star shape. This white rectangle is not the solid as it doesn't fill the screen. It seems to be a bounding rectangle that contains the mask.
Perhaps it is outputting the straight RGB rather than a Premultiplied image? Or it needs to involve the alpha channel somewhere?
Our old system of a mac CS3 and a Black Magic Card would show the comps BGND colour in the same way that AE did.
It seems that I have to turn on a dummy solid on the bottom of the comp to see things properly.
Could this be a setting of AE? I couldn't find anything in the MXO2' s config.
Thanks

Ok, it's definately outputting straight RGB rather than premultiplied.
Where is this kind of thing set? Has anyone have any experience with other video output cards?
Cheers

Cache issue with CS6 Bridge

I'm getting an annoying issue when I open Bridge in CS6. I am informed that there is a problem with the cache and that I have to go to preferences, purge the cache. I've done this, but get same error message every time I open Bridge subsequent times. It is really slowing down my workflow. Am using latest version. Any ideas please?
Many thanks
Baxter

2. Reset preferences, reset the default workspace, and purge the cache.
Damaged preferences or workspaces can cause unexpected behavior in Adobe Bridge. Purging the cache can fix display issues for thumbnail previews.
Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears.
Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
You can also purge the cache by doing the following:
Choose Edit > Preferences (Windows) or Bridge > Preferences (Mac OS).
Select the Cache panel.
Click Purge Cache.
Or, you can manually purge the cache by doing the following:
Choose Edit > Preferences (Windows) or Bridge > Preferences (Mac OS).
Select the Cache panel.
Look at Location and note the path for the Cache folder.
In the Explorer (Windows) or Finder, navigate to the Cache folder.
Drag the Cache folder to the Recycling Bin (Windows) or Trash (Mac OS).

Issues with CS6. Signing in, Rendering, Disk Cache, No response from Bug Report.

Hi,
I submitted these issues some time ago to ae bugs <[email protected]> and did not hear back. I am a long time AE user and usually have a good Adobe experience, but CS6 does not work smoothly for me, and I have not found much help with my issues including emailing support and posting to the site. I find the current website not very effective for tech support.
- Every time I open CS6 it asks me if I want to continue the Trial and I have to go through the steps to sign in. This is frustrating since I have paid for Creative Cloud and this slows me down.
- In several projects I have had to turn off "Enable Disk Caching" or it renders text in the upper left corner, no matter where it is actually placed.
- General slowness, especially using Trapcode Form 2.0. In those cases the playback head in the timeline will not update for many seconds. Also, dragging keyframes around gets very exaggerated. If I drag a keyframe a few frames it will move way off the timeline.
- 3D text layer render times are so long as to be unusable. (I realize this could be related to my system, but still very disappointing for a Quad Core machine).
(I have an Nvidia GTE 120 graphics card. 2.93 Quad Core, AE CS 11.0.1.12, OS 10.6.8)
Any help/suggestions appreciated...
Thanks,
Paul

Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual
The rest - yeah, CS6 sucks. We've heard all of it before and there are endless threads on the raytracing stuff as well as the flakey fast previews and cache.
http://myleniumblog.com/2012/05/15/make-cs6-work-for-you/
Mylenium

PAL D1 preset DV Output issue with CS6

Similar Messages

Maybe you are looking for