PAL DVD

I live in NY and produce DVDs for a living...
I happen to have a very nice Bang & Olufsen PAL TV and DVD that I would like to setup in my office for DEMOS. will DVDSP convert all NTSC material to PAL for display on this TV?
any artifacting/downside?
thanks
steven
colorsstudios.com

Gary is right - the chances are that your B&O TV will
display the source material quite happily.
If they don't, try the following:
With Compressor transcode your NTSC material (you may have to demux first, depending on your audio format) into Pixlet PAL.
Then transcode into MPEG.
When you compare original and the result, you might be surprised not to see any difference - notwithstanding what the vendors of expensive "pro" material tell you.
G5 2GHz 2CPU & PB 17 & G4 Megabit Mac OS X (10.4.5)

Similar Messages

How do I convert an entire PAL DVD to NTSC, menus and all?

Hello everyone,
I've been given a set of PAL DVD's which need to be converted into NTSC. Now, from my understanding, there is no one program available that can do this, so I've had to rip all the video tracks off, convert them to NTSC mp2's and author the DVD from the ground up in DVDSP, build a VIDEO_TS file, then use Toast to compress to a single layer DVD and burn. If anyone knows a program that can convert an entire PAL DVD to NTSC, that would be greatly appreciated.
The next problem is that when I burn any of the DVD's and put them in a duplication tower (I'm not sure if that's the actual name, but it's one of those machines where you just put the original disc in the top drive and fill the other 8 or so drives under it with blanks), it says that the burn has failed. I have tried another duplication tower and end with the same result. One option I have not tried just yet is to change the brand of media I'm using to burn, but will do so next chance I get.
I'm not sure if the two problems are related or not, but I just thought it would help.
Thanks in advance.

2 options.
1) Best option - only available if you have the source material - Convert source material from PAL to NTSC using the Nattress standards converter.
http://www.nattress.com/Products/standardsconversion/standardsconversion.htm
or the JES deinterlacer:
http://www.xs4all.nl/~jeschot/home.html
It's also possible to do this in Compressor but not as good quality and longer render times.
2) If you don't have the source footage, you'll need to demux the file in MPeg Streamclip:
http://www.squared5.com/
then transcode the file as described here:
http://discussions.apple.com/thread.jspa?messageID=1946985&#1946985

How to create a PAL DVD from a NTSC camera

Hi,
I have a Canon HF10 which I have bought in the US, so it is a NTSC camera. I am living in Europe, so I would like to create a PAL dvd from the footage which I have recorded.
The footage have been shot using 1080/24p and I have imported it into iMovie. Do I need to do something extra or can I just export it and burn an dvd from iDVD?
Best regards
Henrik.

Henrik Skak Pedersen wrote:
.. The frame rate is 30 which is a surprise because I recorded it at 24.
no surprise.. the ccd of you device is read-out 24p, but the camera records upsampled in 30i ..
24p on consumer devices is mostly marketing blabla..
in Europe, a 25p more is more interesting..
you have a NTSC device. full stop.
in iDVD, set prefs to 25fps (=PAL), relaunch iDVD, import iM project..
so, you record in 24p, got 30i on tape, anc convert again in 25i (=PAL) ... happy landing..
aside: better results in standards-conversion with free app JES Deinterlacer ...

How to produce a progressively encoded PAL DVD?

I've been tearing my hair out trying to get a conclusive answer to this. I'm trying to learn how to produce a PAL DVD that is encoded "progressively" and is not interlaced.
First I posted about it here in the Compressor forum, and then over at Ken Stone's forum.
To summarise , here's what I've been doing:
1. Export from FCP using Compressor
2. Apply the DVD preset
3. In the Inspector window, click the Frame Controls tab
4. Set the Resize Filter to Better or Best
5. Set Output fields to Progressive
6. Set Deinterlace to Better or Best
7. Uncheck Adaptive Details
8. Hit Submit and give your job a name
9. Import .m2v and .ac3 to DVD Studio Pro
10. Author and burn DVD
However, this is not producing a proper progressive encode - inspecting the .m2v asset (using VidoSpec) tells me that it is "lower field first."
Can anybody please advise? This is driving me crazy, and each time we issue a DVD reviewers pick up on the fact that it is not "flagged for progressive". Is this something that needs setting up as an option in DVDSP?

I need to read up about this topic also. I release Retail DVDs and have always shot in interlaced mode and released that way up until now
Now I am doing my first proper feature. I am advised to shoot progressive scan.
I am assuming from this thread that to produce commercial DVD that will play on all TVs and with all DVD players I will need to encode the final film to DVDStudio pro in Interlaced mode. (in other words in order to be played on all TVs the DVD needs to be interlaced not progressive scan. But to achieve a "Film Look" I need to shoot progressive. (I have not yet considered whether 24 fps or 25)
The film is aimed at a wide film fest, probably using a digital print, but I doubt we will get as far as transferring from High Def video to film (because of the expense) But I imaging the major market for the film internationally will be on DVD.
I am hoping to use a DOP, so hopefully will get more technical help there.
Best
Ian
Corolo Film & Video

NTSC to PAL DVD

I am attempting to make a PAL DVD in DVDSP 3. I changed the disc and encoding settings to PAL and encoded my stand alone movie from media 100 which was 720x480 as PAL.
I watch the DVD on my g4 apple dvd player and it's fine, but when I watched it on my apex dvd player, I saw these lines running across horizontally. Thick lines, mostly on fast motion, but other places too.
When my client watches the same dvd on his computer, (mac 0s 9 i believe) he sees what I see on the apex.
Question: Is this normal, since my monitor is NTSC to see these lines? Normally when I've watched a PAL piece on a PAL player on an NTSC monitor, I see color problems and tracking problems... but not these lines...
Also: What is good for a stand alone program, to convert files from NTSC to PAL?
Thanks in advance to anyone who can help me.

You can't just encode from one standard to another
You need to use a standards converter, or have original PAL footage
What do you mean by "I changed the disc and encoding settings to PAL and encoded my stand alone movie from media 100?"
Just changing to PAL in DVD SP if the original footage is NTSC doesn't change the source footage and creates a PAL DVD.

Burning PAL dvd from NTSC FCP 6 project?

I need to burn a European market PAL dvd sample from a NTSC project. I've done this before for a European film festival, but it was a very hit or miss process.. Basically, back then, I mixed the project down as both PAL and NTSC files, then burned every combination of NTSC and PAL format DVDs (PAL file/PAL dvd format, NTSC file/PAL dvd format, PAL file NTSC format, and NTSC file/NTSC format).. I expected the PAL/PAL to work, but it didn't. In fact, I seem to remember that one of the combos that I least expected to work actually did.. maybe the NTSC/PAL disk (can't remember for sure)
Will someone please advise me as to the correct way to burn the NTSC project, such that it will be playable an European PAL format machines?

If you need a true PAL dvd, you need to convert your ntsc quicktime to a PAL quicktime using either compressor or something like graeme Natrresses standard conversion plug in. You will also need to recreate your dvd menus and reauthor the dvd.

DVD Player has started playing PAL DVD's on external PAL display very badly

I have my Early 2006 iMac connected to an external HDTV (Mini-DVI->HDMI)
Using display options I can switch the external display easily between NTSC and PAL refresh rates.
It used to be that apple's DVD player could play a PAL dvd just fine on the display but now the frame rate drifts in and out of sync as though it no longer understands that the TV is set to 50hz.
Although I used to use DVD player all the time I haven't done so for quite some months so I don't know when this started happening although I have a feeling that it was with a recent OS X update.
I say this because a few months ago all of a sudden the same thing happened with Elgato's EyeTV, but they issued a patch sometime later and it fixed the v-sync issue for their app.
I'm also wondering if it may be a de-interlacing issue rather than a v-sync issue but I'm not sure, I've tried various DVD's.
I have tried deleting ~/Library/Preferences/com.apple.DVDPlayer but this hasn't helped.
If it's relevant, my iMac has an ATI Radeon X1600
Any ideas why DVD player has started having trouble with 50hz displays and how I might fix it?
Failing that, is there a good (hopefully free) dvd player alternative which is better at handing external displays of varying display modes?
p.s this was the most appropriate forum I could find.

I suggest that you create 15-second silent audio slug that you can use to move the audio the same amount you have moved the video.
John Link

Problem with making 16:9 PAL DVD

Hello!
I'm trying to make a 16:9 PAL DVD in Adobe Encore and everything is perfect untill I play the DVD on my TV (it works just fine on my computer). Two videos included in the DVD were made in Adobe Premiere and one of them works without any problems (it is just a slideshow), but part of the other footage isn't shown on the TV - the video is being played on the TV with no black lines around it, but it is like cropped. The video was made in 16:9 and I've also checked the settings on my DVD player, which look just fine to play a 16:9 DVD. I think that this problem had occured while making the DVD in Adobe Encore and I'd like to know how to solve it if anyone of you can tell me how.
Thanks for your help.

OK, the PrPro Project/Sequences are set to 16:9 PAL and Exported as that, into an Encore 16:9 PAL Project, right, or did you use Adobe DL for transferring the Assets over?
On a computer, the DVD plays fine, but part of one of the Timelines is black, when the DVD is run on a set-top player, hooked to a TV. The other Timeline is shown much smaller, with black bars around it. Is that correct?
Can you test the DVD on another set-top player, and another TV? Maybe stop by your local electronics store and ask them to play it for you. What happens there?
As there are differences in the setting of both players and TV's regarding wide-screen, it could be as simple as those settings. However, that would not explain why half of one Timeline is black. Now, poor choice of media, or too high a burn rate could account for some of that.
What media did you use, and what was the burn rate?
Good luck,
Hunt

Flash - SD Widescreen PAL DVD

Hey everyone, I did post this one level back as another topic, but then started reading around and figured this may be a better place to post. I apologize for the double post, won't happen again - I'm new to the user forums here and I admit that this is a bit of a desperate plea for help. I apologize in advance.
So, I've been working on a project recently that's been kind of difficult for me to test since I don't have access to the platform I'm trying to develop for. I was hoping somebody might be able to help guide me to the information I need, or let me know outright if I'm on the right track or completely out to lunch with my thinking here.
Anyway, shorthand version of what I'm trying to accomplish: I'm trying to design a 16:9 wide screen video animation. I built the animation using Flash CS3. Originally it was built for NTSC but now needs to be burnt to DVD in a PAL format. I re-sized my animation to be 1024 x 576 (square pixels) at 25 FPS and exported it from Flash as a .mov using the Animation Codec. (Exported with 16:9 PAL settings at 720x576 with a pixel aspect ratio of 1.422.) I brought the new rendered file into Adobe Encore and set up my chapters etc. All footage has been interpreted as SD PAL Widescreen 1.422 PAR.
When I view the Movies I export from flash (off my desktop) they are 1024 x 576 square pixels ... they appear distorted and aliased. After burning the videos to DVD with the footage interpreted as previously mentioned, I tried viewing them on my computer. The screen capture resolution is 720 x 404 ... which is kind of odd to me. I would expect 720 x 480 or even 720 x 576. Overall though the quality is pretty nice and doesn't look greatly distorted.
I guess what I'm trying to ask is: Is that normal? Is that right? wrong? Ultimately though, does anyone know what a Widescreen PAL DVD would look like viewed on a windows XP machine? (In Windows Media Player with a DVD Codec?)
Any guidance or help on this would be greatly appreciated. If there is any other information I can provide you with to help with understanding my plight, please let me know.
I'm a web designer backed into a corner here and really don't have a whole lot of video experience. I'm also living in Canada and don't have access to a PAL system to watch the final product on ... so I'm just trying to get my settings as accurate as I can on my end.
Thanks in advance.

>The screen capture resolution is 720 x 404 ... which is kind of odd to me.
On playback the movie is displayed with square pixels. If the DVD plays 720 pixels wide then the corresponding height will be 405 for a 16:9 movie.

NTSC project - PAL DVD

Hello,
I'm editing a project in NTSC (since I shot in NTSC), but my client is European and wants the final project on a PAL DVD. How can I output the project to PAL?
Do I convert it first in Final Cut (how is this done?) or does transfering the project to iDVD in PAL do the trick? It needs to be highest possible quality.
Thank you for suggestions and helpful 'how tos.'

on the basis of your need for highest quality, two options:
1- send a tape to a facility house who will standards convert the mataerial to a PAL tape which you can then import in a PAL sequence
2- purchase Nattress which is a software standards converter and a FCP plug-in,
it costs $100 and worth every cent
you could use Compressor, but for quality use Natress as it is a very high quality dedicated Standards Converter
once you have edited in a PAL sequence, compress to m2v and AC3 and import into DVDSP and author the DVD
all you need to know is on the web site:
http://www.nattress.com/Products/standardsconversion/standardsconversion.htm

Will my Superdrive play a PAL DVD ?

I have the opportunity to purchase a DVD that I haven't been able to find anywhere for quite some time. The problem is that, according to the description, it is only available in this form: "Region Encoding: ALL, TV system: PAL" .
Since my TV is NTSC (and so is my LG DVD player), I figured I was out of luck. I then thought of my iMac G5 - Will this DVD play on my iMac ?
Walt
20" iMacG5 Mac OS X (10.4.8) 160gbHD, 1.25gbRAM

As Niel mentions, your iMac will play that PAL DVD, but keep in mind that it will be listed as a different region code. Your DVD drive can be switched up to 5 times before it gets locked into that last region. That could be a bad thing.
I bought a PAL concert DVD for a friend and took a different route. I used Handbrake to extract the image, then used iMovie to edit it with transitions and such, then used iDVD to create a disk with menus and everything. It looked very nice if I do not say so myself.

Can Encore make a Pal DVD from NTSC source?

Can Encore make a Pal DVD from NTSC source?

Convert NTSC <--> PAL http://forums.adobe.com/thread/995779
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042

Will PAL dvd player play my NTSC DVD-r?

I'm trying to figure out if I need to convert several NTSC dvd's into PAL format to send to a friend's mom in Israel (she's very sick and would like to see these soon).
Since I've never converted between these formats, I've been doing lots of research and keep getting more confused. I downloaded JES Deinterlacer (i think thats what its called) but I'm not sure I need it since I read the following on an imovie FAQ website:
"I have an NTSC project and want a PAL DVD.
The good news is: You can just send an NTSC disc. Any PAL set top DVD player capable of playing DVD-R discs can also play NTSC discs. All that is needed is a fairly new TV, built in the last 8-10 years or so."
Could this be true? Can I really just send the NTSC dvd's to her? I hate to waste time here...please help...
Thanks so much in advance.
Jenny

That´s right; NTSC DVDs will always work on PAL players when the player is compliant to the DVD specs. Those players do give out the regular NTSC signal and/or convert to PAL60. Some players can even convert to PAL50. The problem is the TV set.
My German TV is 14 years old and cannot handle PAL60 or NTSC; I would need one of those rare players that convert to PAL50 (usually with poor results).
But NTSC DVDs will always work on a PC (when it is an all-region DVD).

Will a multi-region (Region 0) PAL DVD play on my MBP?

I have a 2009 unibody MBP (15", 2.66GHz model). Purchased in the USA, located in the USA.
The MBP has a Matsushita DVD-R drive, model UJ-868, rev KB19. System Profiler does not show any region code for the drive, and I do not recall ever having to enter a preferred region code. It plays NTSC DVDs just fine.
Will it play a PAL DVD, coded as multi-region (Region 0)?
Any tips on how I could verify this (that is, without purchasing a PAL DVD just to find out)?

There is no real 'Region 0' - Region 0 is not an official setting; discs that bear the region 0 symbol either have no flag set or have region 1–6 flags set.
So, yes, it should play (either NTCS or PAL).

PAL DVD Issues

I'm not sure if this question is for this forum but I'll give it a shot.
My original FCP Project was an PAL HDV Project. Once I finished editing, I put the sequence in a DV PAL sequence, rendered it and outputted as a FCP file. I put that file in compressor to make a m2v PAL file. I took the file into DVD SP as a PAL project and burned it as a SD DVD on the G5.
The DVD tested fine on a several DVD players.
My problem is that I sent the DVD to Europe and they are experiencing major 'strobing' issues. I know there is some jitterness with HDV on motion scenes, but they are seeing constant strobing on their PAL DVD players. Am I doing something wrong. I took the DVD to a post house in Los Angeles, and it plays fine in their PAL systems. It actually play fine in my NTSC DVD player as well.
There isn't much motion in the film, mostly interviews.
Any clues of why this would happen?

It was originally shot in PAL 1080i50 on a Sony Zu1. I am assuming that is true PAL.
I made a DV PAL sequence first because the rendering time and conversion time to m2v files is much less.
Is the DVD burner that are installed on G5's capable of burning true PAL DVD's? I have one of the original G5's.

FYI Playing PAL DVD on US MBP

I am not sure if this has been brought up before, but my MBP (late 2007), and I am sure many other similar boxes play PAL DVDs perfectly. No conversion necessary.
I normally use VLC, but I checked with the Leopard DVD player and both work normally.
I thought I would just pass this along for anyone who was not sure.
Enjoy.

If your movie is encoded in the right format (such as MP4) and to specs that the Apple TV is happy with, it doesn't matter if the original movie was PAL or NTSC.
The difference between the two is the refresh rate. NTSC is approx 60Hz and PAL is 50Hz. The Apple TV will happily convert 50Hz to 60Hz and vice versa. It will output to whatever refresh rate is set in the Audio/Video settings on your Apple TV - which if you are in the US will most likely already be 60Hz. There should be no need to change these settings.
However, you may notice that motion (such as scrolling titles and slow pans) will not be as smooth due to the conversion.
But, in practice this is not a problem.
In short, the answer is YES.
Message was edited by: Easybourne

PAL DVD

Similar Messages

Maybe you are looking for