PAL tapes to NTSC format

i have video tapes in PAL version and i need to convert them to NTSC so i can edit..how do i do this.????

Nattress Standards Conversion would be one proven technique.
Maybe MPEG Streamclip. Seems like I used this a few years ago to go from PAL → NTSC.

Similar Messages

Can I convert PAL-Tapes into NTSC in order to import footage into imovie?

I had a question about using PAL-tapes. Can I convert PAL-tapes into NTSC tapes?
I am trying to import my video that I shot with a PAL-tape. Is there a way to import my data into imovie?

I just answered your question where it belongs: In the iMovie discussion.
http://discussions.apple.com/thread.jspa?threadID=235207&tstart=0

Convert PAL-tapes into NTSC tapes

I had a question about using PAL-tapes. Can I convert PAL-tapes into NTSC tapes?
I am trying to import my video that I shot with a PAL-tape. Is there a way to import my data into imovie?

Yes.
Use a PAL camera to import the PAL tape.
Use JES Deinterlacer to convert to NTSC.
Create a new NTSC iMovie project.
Import the converted movie.
Export to NTSC tape using an NTSC camera.
For more info on the use of JES Deinterlacer:
http://www.danslagle.com/mac/iMovie/tips_tricks/6017.shtml
(At the bottom)

PAL tapes in NTSC cameras

I have an NTSC DV camera and a PAL formatted DV tape I'd like to import into either Quicktime or iMovie. Although the camera can't handle PAL, I'm assuming that DV data is just data, and if it's going via a Firewire cable there must be some way to just import the PAL data straight into a PAL DV file. Anybody know any way that this can be done?
Help appreciated!

Nattress Standards Conversion would be one proven technique.
Maybe MPEG Streamclip. Seems like I used this a few years ago to go from PAL → NTSC.

How to convert PAL dvd to NTSC?

Hello I am trying to convert a PAL dvd to NTSC format and was unable to when I tried mac the ripper. Perhaps it wasn't the program for it.
I'm looking for a free program that would allow me to do this.
Thanks.
Dorian

I do not have final cut pro. Is there another option I can use?
No I'm not trying to rip dvd's. I bought this dvd in europe but unfortunately cannot play in on my dvd player (although I have an all format playing dvd player).
Also, do you get an error when logging into the apple forums.
This is the message I get every time:
Error
An error has occurred. We apologize for the inconvenience.
Thanks for your help.
Dorian

Setting PAL/NTSC format with OneStep in iDVD 5

I'm trying to create a DVD from some MiniDV tapes I've recorded, but I need to make sure it's recorded in PAL format as it's being sent overseas. I'm using the OneStep option in iDVD, but the only place I could find to set PAL/NTSC is in the preferences, which is only available when you're using a project. I created a dummy project and set it to PAL, then quit iDVD, restarted and went to the OneStep option to burn the DVD. The problem is I think it still recorded in the NTSC format because the DVD played fine on my home DVD player on my tv, which is NTSC. I checked the settings again on iDVD, and it still says PAL, but I'm not convinced it actually recorded with OneStep in PAL since it plays fine on my home system. Can anyone tell me the definitive answer to recording in PAL/NTSC using the OneStep option in iDVD? Thanks in advance.

I used OneStep once... Don't like it. So I'm not much help there, but...
I just returned from an Italian-based cruise ship and bought their DVD of the cruise. I became acquainted with the videographer since he was on a few excursions we took. When I bought the DVD, he was there and I asked about whether I needed NTSC for back home. He said: "It doesn't matter with DVDs." Apparently, he was right because I went back to my cabin and played it in my PowerBook without any trouble. Same here in the USA.
So maybe it doesn't matter, but I can't tell you that with 100% assurance.

Can I "print to tape" using PAL and Capture from that tape using NTSC?

I need to edit video from a video card in the PAL format somehow onto the FCE Timeline using NTSC.

This is not any where nearly as simple as it sounds. You need to standards convert the PAL material to NTSC. I'd recommend using Graeme Nattress' Standards Converter for this. Then you can edit in NTSC and record to NTSC tape.
Just to add, FCE does not accept standard definition material from a video card. It only handles AVCHD media from a video card. The only HD tape format it supports is HDV.
Message was edited by: Tom Wolsky

IDVD-change PAL video to NTSC video format on burning

Hi.
I have families overseas and would like to send them family movie video. But the problem is they have NTSC format or signal system and we have PAL here in Australia. Is it possible for a video made by PAL video camera burn as NTSC to dvd using iDVD?
I have just bought my new Mac Mini Intel Core 2 Duo Leopard. I don't know anything about iDVD and I still have to use and try it.
Can any one help me.
Many thanks.
JVale

Is it possible for a video made by PAL video camera burn as NTSC to dvd using iDVD?
Yes, BUT .......
PAL and NYSC video have different frame rates and image sizes. Quicktime, as used by iDVD can make the conversion, but the results probably won't be great quality.
Make sure you have iDVD's preferences set to NTSC BEFORE you start a new project to send to them.

Converting PAL format DVD to NTSC formats

THis might be a wierd one, but i was wondering if anyone knows hot to convert a DVD with PAL format (which are used in most european countries) into a NTSC format (which is used here in the states). I dont know if there is a software i need, or any of my apps on the computer will change the format for me.
thanks

There is some useful information here:
http://www.danslagle.com/mac/iMovie/tips_tricks/6017.shtml

Output to NTSC format for DVD

Hi,
I am from the UK, I filmed some DVCAM footage in PAL format, but bringing it into FCP to output onto NTSC and onto DVD for a Canadian conference / Broadcast.
Can i simply change my project and capturing settings to
get the footage to run at NTSC (even though it was filmed in PAL?)
And if i want a UK edit of the film do I need to recapture all my clips at PAL settings or can this be done via the DVD output???
cheers
Chris

Sadly no its not that simple not so much because the image sizes differ but more because of the difference in frame rates.
Your options after you input edit and master in PAL
Convert to NTSC using a transfer house
Convert to NTSC using Compressor (can be slow)
Convert to NTSC using Nattress' plug-ins (will cost you money but they work)
http://www.nattress.com/Products/standardsconversion/standardsconversion.htm
Convert to NTSC using JES Deinterlacer (free and works)
http://www.xs4all.nl/~jeschot/home.html#DEI
This will give you an NTSC Master to compress for DVD

Burning PAL dvd from NTSC FCP 6 project?

I need to burn a European market PAL dvd sample from a NTSC project. I've done this before for a European film festival, but it was a very hit or miss process.. Basically, back then, I mixed the project down as both PAL and NTSC files, then burned every combination of NTSC and PAL format DVDs (PAL file/PAL dvd format, NTSC file/PAL dvd format, PAL file NTSC format, and NTSC file/NTSC format).. I expected the PAL/PAL to work, but it didn't. In fact, I seem to remember that one of the combos that I least expected to work actually did.. maybe the NTSC/PAL disk (can't remember for sure)
Will someone please advise me as to the correct way to burn the NTSC project, such that it will be playable an European PAL format machines?

If you need a true PAL dvd, you need to convert your ntsc quicktime to a PAL quicktime using either compressor or something like graeme Natrresses standard conversion plug in. You will also need to recreate your dvd menus and reauthor the dvd.

Workflow for converting PAL DVD to NTSC

Hi,
I have read this thread
"http://discussions.apple.com/message.jspa?messageID=7387015#7387015"
but am a little unclear and would appreciate some help.
I have shot 3 short movies in PAL anamorphic, edited in Final Cut Express HD 3.5, exported using the Quicktime Movie option, altered with QT Pro to put back to anamorphic, then added to an iDVD '08 widescreen project.
Everything is fine, but I have realised that some of the recipients are in the Bahamas and require NTSC.
The project is a paid commission so I want to ensure the conversion is as good as possible, without any re-digitising / editing.
I duplicated my iDVD project and have used the project info pane to change to NTSC format. I deleted the encoded assets and this has set of iDVD to re-encode. Is a re-burn all that is required once encoding is done?
It seems this is the easiest option, but are you suggesting the conversion can be better if i use the free JES deinterlacer product.
To integrate this into my workflow I am assuming I could duplicate my asset folder (that contains the quicktime exports from Final Cut) and convert them using JES.
Modification to these quicktimes (ie. a re-edit and export from Final Cut) would usually result in iDVD updating its content upon open.
Am I on the right track?
I have had a quick look at JES. I have added a file to convert and looked at the projects tab.
Do I just have to choose "Standards conversion" & select "NTSC"? What should I set out of "Blend, Telecine or Minimal Blend" for best quality.
I am using an Intel iMac with 2gb of memory.
Thanks
Eric

Thanks for responding. I am currently trying a few options in JES but I was wondering if you have any idea of the best options to select.
I have tried the Export radio button option to DV Stream and Quicktime, but the resulting output is quite a bit smaller than the Final Cut Express Movie File that is the source. I am concerned the quality is reducing.
I am now using the Direct / DV-NTSC output option to see the file size of that.
With regards to iDVD, that process took a hour or so for the automatic re-encode of the project assets and then a burn. It seems to play fine on my MacBook, and there appears to be no detectable degradation. The process seems fine. Has Apple caught up with JES Deinterlacer, or is the benefit not appreciable when not using HD footage or better?
Thanks
Eric

Pixel Aspect & Compressor for PAL going to NTSC

hi.
I have PAL clips which be part of an NTSC iDVD project. do I need to export the QT movies in NTSC format? i.e.,
do I need to change the sequence compressor and pixel aspects to NTSC?
do I need to change the PAL clips within the NTSC timelines to NTSC compressor and pixel aspect?
or... (and I would really prefer not to have to do this because the same sequences are being exported to MP4 really well as they stand)
do I transcode my PAL DVD MPEG files into DV-NTSC format via MPEG Streamclip?
cheers,
Gregory

You need to get good standards conversion software like Graeme Nattress' Standards Converter. You won't get good results doing it in FCE.

Convert PAL DVD to NTSC?

Hi. I recently got an imac G5 and tried playing my 1st DVD. The message came up saying that I have to choose a region code and will only be able to set the region code 5 times before its permanently set. I find this very inconvienent as I have some of both NTSC (region 1) and PAL (region 2) DVDs that I would like to be able to play on my Mac. As a worksround....I'm wondering if its possible for me to convert my PAL DVDs to NTSC using imovie and perhaps some other software.......perhaps importing the info on the PAL DVD into imovie ......and burning a NTSC (region 1) copy? If possible .....how would I go about doing this? Thanks.

I have my computer set to read region 2 DVD . Is this a problem when trying to convert a DVD to region free or 1?
When I run MTR, I get 2 folders, Audio_TS (which is empty) and VIDEO_TS.
VIDEO_TS has many files, example; VIDEO_TS.BUP, VIDEO_TSIFO, VIDEO_VOB, VTS010.BUP, VTS010.IFO, VTS010.VOB....... etc.
When I open JES 2.7.6 to convert from PAL > NTSC... the JES input pane doesn't see the files (they won't hi-lite, double click or anything) (could it be because I have my computer set to read region 2?)
Toast see the MTR files. If I try importing those same MTR files or the DVD files to Toast 6>video tab, I get "files are in a unsupported format and cannot be imported"
If I try and simply take the Pal DVD and "Toast it" from the desktop, I get "Disk could not be mounted. All open files and programs on this volume must be closed first"
When I tried DVDxDV>OTMovie, the playback was jittery on any thing that was moving with-in the picture frame. completely un-watchable. (well maybe with the right drugs....)
I looked at both links send by Matti (btw thank you very much) but I am a novice and don't understand all of the technical jargon....
All I'm trying to do is get a DVD that will play on my stand alone DVD/TV....
KnuckleHead

Burn a PAL dvd from ntsc project

I have an NTSC project with all ntsc media and would like to burn a PAL dvd. what is the easiest way to do so. I converted the media to pal and was hoping to do a 'save as' on the dvdsp project and just change it to PAL but it won't except the media.
thanks
andy
dvdsp 4, 2.7 dual g5.

It makes sense that a PAL DVD project wouldn't accept media that's already compressed to MPEG2 in NTSC format. When the DVD is built, all it does is multiplex the audio/video. It doesn't change the compression or frame rate or size.
You'd probably need to recompress the original edited source video in Compressor to PAL format. Once you select a preset in Compressor, you need to change the Video Format from Automatic to PAL. Select the preset and in the Inspector, click the Encoder section, then the Video Format tab. Then you'll see the Video Format popup menu where you can change it to PAL.
One other thing to keep in mind: It might be a waste of time to convert it to PAL since most PAL DVD players can convert NTSC format DVDs on the fly during playback. I send NTSC DVDs to Hungary all the time and they have no trouble playing them with typical consumer PAL DVD players.

PAL tapes to NTSC format

Similar Messages

Maybe you are looking for