Palatino superscript doesn't work right

Palatino is my favorite font. But since installing Mavericks, superscripting doesn't work right in Microsoft Word. When Palatino type that is 14 points or smaller is superscripted, instead of being reduced a couple of points it is made extremely tiny. Also, instead of being raised to the top of the line, it appears in the middle (vertically) of the line. Since I use endnotes a lot, this effectively destroys the Palatino font for me.
According to Get Info, this particular font is Copyright © 1991-99, 2006 Apple Computer, Inc. Copyright © 1991-92 Type Solutions, Inc., so I've had it for a long time. Is there an updated version that will fix this problem? I don't have this problem in other programs, including PowerPoint. I use Office 2011.
Here is an enlarged image of the superscript (st):
<img src="http://ti.org/images/Superscript.png">

I think folks are looking for a solution.
And I have given one. The Palatino font supplied with Mavericks is no good. The only fix is to replace it with an older version. If you don't have one, you can't fix it.
Do you agree that Restore Standard Fonts...works ... Yes? No?
No. That option only attempts to remove fonts from the System and root Library folders that are included with OS X. It doesn't give you an option to restore OS X supplied fonts that are missing.
I have to presume you installed Mavericks over Mountain Lion. In Mavericks, Palatino is installed to the /System/Library/Fonts/ folder. In ML, that same (correctly working) font is installed to the /Library/Fonts/ folder.
Presuming this scenario is correct, the working version of Palatino in the /Library/Fonts/ folder was already active. When resolving conflicts in Font Book, the active font is always the one left active. Which would mean it removed the broken, Mavericks installed version.
As noted above, I fully tested and have proven the Mavericks version of Palatino is bad. I have multiple versions of this font. They are from:
OS 9
MS Office 2011
Lion
Mountain Lion
Mavericks
Adobe Type 1 PostScript
Adobe OpenType PostScript
I used Suitcase Fusion to activate one version at a time. Testing in Word, InDesign and other apps, they all behaved as expected until using the Mavericks supplied version.

Similar Messages

Power Nap doesn't work right in my MBA mid 2011. Anyone knows why?

I just boght a MBA middle 2011 and power nap doesn't work right on it, specially in Mail app, where it downloads only a few mails and the rest of them are downloaded as usual, when recativate my laptop. Does anyone knows why?... i also tried to download the SMC update, but when i try to install it i get the message that my system is not compatible with the update.
Please somebody help me!!
Thanks in adevence!

http://support.apple.com/kb/HT5394

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

I have a MacBook Pro Retina (2,3 GHz Intel Core i7 - 8 GB 1600 MHz DDR3 - Intel HD Graphics 4000 1024 MB). I use KompoZer for my website, but after installing OS X Yosemite it doesn't work right (I cannot see images in the website).

It's beta open source software so I'm not surprised. It does't look to be too active a project, so I don't know if it will help or not but you might be maybe better off posting a bug report on their Sourceforge page here: http://sourceforge.net/projects/kompozer/

DVD menu doesn't work right in DVD players

I've created a DVD in Encore for Mac. It plays fine on my Mac and on Windows. However, once it is inserted into a stand alone DVD player, the menu doesn't work right. I have four text menus. In the DVD player, none of those are navigable. Arrowing up or down doesn't work. You have to click a number on the remote keypad and then play. This also causes "Channel 1" or "Channel 2" and so on to display. Any ideas how I can get the arrow keys to work? I don't have a stand alone dvd player to test against.
Also, in Windows, I have someone that wants to duplicate the dvd. They're using Movie Maker. It gives an error that the codec is not installed but doesn't say which codec. Any ideas on that?

The only time I recall similar problems was the issue Jeff was asking about above (Mac, Encore CS3, certain OS). If you don't solve this otherwise, I'd experiment with that.
You appear to have confirmed that there is button navigation. (In button routing, each button points to another.) Where does it break down?
On the Mac/PC, are you using the mouse? In the computer DVD software player, there should be a "remote" that you can use to see if the button navigation is working. Does the computer "remote" option work? If so, it makes it not working in a standalone player even odder.
If not, then look at whether the project works before you burn to disk. Does the "remote" work in the Encore preview? Or build to a folder, then play the DVD from the folder. (I don't know how on Mac; on PC, I find the first .ifo in the VIDEO_TS folder, and play that.)

When trying to read emails on hotmail on firefox, the "back" button on my mouse doesn't work right. It works fine if I use internet explorer. This started about three days ago.

Also doesn't work right when I try to click on the inbox. I sometimes just get a blank screen. Seems to work fine on every other site except Hotmail.

Nothing changed after clearing cashe and cookies and restarting in safe mode.

Media player doesn't work right , code# cood1197

Why won't any of my music play on windows media player and rip any music to my ipod recovered august since then player doesn't work right now. product bv545aa#aba serial# 4ce1031lws ,model # p6754y & getting code # cood1197 & are there any free updates for player ? thank you.

I haven't had a problem with either. I have switched to using MixZing as my player because it also allows me to work with the contents of my SD card and has a nice equalizer function that really works well with a quality pair of headphones or when plugged into my home stereo. It's available on the Marketplace.
I do know that with Youtube, I get much less buffering if I pull videos through the WiFi function when attached to my home network.

I upgraded to IOS 5.1 and the phone doesn't work right

I upgraded my phone to IOS 5.1 and the phone functionality doesn't work right. If I make a call, once connected I go back to the main menu and can't get to the phone controls (including the ones to hang up). If I receive a call, the wheel comes up, the phone does not ring and I can't answer it. I tried restoring the phone, but that did not work. Does anyone have any ideas?

Press the camera icon and slide it up.

Audio output doesn't work right. How to fix it?

I plugged my earphones in and noticed that the left side was much louder than the right. I tried different earphones and and it works fine on my iphone so it definately is the plug in of my mac that now doesn't work properly anymore

What did you do, before this happened? Did you install new software? Update the system?
Have you tried to restart the iPhoneor to reset the iPhone? See: reset your device
http://support.apple.com/kb/TS3281
If that does not help, restore the device: restoring iOS software

Java 1.4.1 doesn't work right with Win98se and IE6SP1

I have installed the 1.4.1 runtime on two computers. On the WinXP one (with IE 6 SP1) everything works 100%. When applets are loading the Java icon is showing in the placeholder, and in the system tray. I can open the console from IE, and all applets work (also the "hot java" on download page that does not work with the Microsoft buildt in Java :-)
BUT, on the Win98se machine not everything is working. First there is no Java icon either in the applet windows nor in the system tray on most applets (like my homepage http://home.chello.no/~larse/ or my worsk page http://datafangst.ergogroup.no), I cannot open the Java console from Internet Explorer either. So I suspect it's still using the Microsoft Java. BUT even stranger, the "hot java" animation on the Sun download pages IS showing, and THEN the Java icon shows in the tray. Why is it only using the Sun Java for some applets - not all ?

I experimented some more today, trying to find out why IE is not using SunJava.
I search the registry, and found that all references to Java (even the "Sun Java Console" menu) pointed to "c:\windows\system\msjava.dll". But there was a key "Treat as" that pointed on to the SunJava plug-in object (could the problem be that Win98 doesn't understand this and still use the default MS Java).
Also tried using "Norton Registry Tracker" to track what happened when I turned on/off SunJava for IE in the Control Panel and in IE. No changes anywhere. Isn't that a bit strange too...
Finally I just took a shot and renamed "c:\windows\system\msjava.dll" just to try to get rid of the MS Java AND THEN suddenly the SunJava works everywhere, and the "Sun Java Console" menu works too...
And no matter what I configure (turn on/off Sun Java in IE, turn on/off support for IE in the Sun Java control panel...) it always use SunJava.
Haven't noticed any side-effect so far, so it works for me, but I'm quite sure this is NOT the way it is supposed to work - right ?

Adobe Premiere Elements 8.0 doesn't work right!

The program keeps shutting down and then when I play back a video I'm making it plays it all skippy-like! What am I doing wrong? I just got a new computer and it's got a dual-core AMD processor and it still doesn't work. I NEED HELP DESPERATELY!!! Please reply quickly!

I would get your brother to help with that info - you'll owe him, so watch out!!!
Without that info, it's almost like saying "my car won't start. What's wrong?"
And then when people begin to ask, "is there gas in the tank? Is the battery charged? Do you have the right key for that car?" and you say, "I don't know," it leaves them in a lurch.
Don't tell your brother that he's helping you learn about both computers and video-editing, or he'll demand higher payment. Just tell him that some guy on the PrE forum asked for some info to help you. Act like it's homework, or something, or he'll get smug, and you will not be able to live with him, if he knows how much he helped. Brothers are like that.
Good luck, and just go down the list. If you run into some spots, where you can't get the info easily, someone here will be glad to help. Might take a few posts, but we'll get this done, and your PrE working, as well as it can. Be patient, and we'll help.
Hunt

FaceTime doesn't work right after updating IOS 8.1.1

I updated my iPad with IOS 8.1.1 and now my FaceTime app doesn't work. Will there be a fix for this soon?

Hello craigfrommarion,
The article linked below details a number of troubleshooting steps that can help get FaceTime working correctly on your iPad.
iOS: Troubleshooting FaceTime
http://support.apple.com/en-us/TS3367
Cheers,
Allen

My Lexmark X2670 printer doesn't work right since I reinstalled the Firefox 3,6 version. I keep getting the alignment page to print over and over. Is there a problem between the two? Do I need a new printer driver? What?Daisynew66

I had to change my hrowser to Firefox because Internet Explorer 9 doesn't work with my ancestry.com program. I can't uninstall Internet Explorer 9. I got Firefox 4 and it didn't work either. I started having problems with my printer working at all then. l was told to go to Firefox 3.x. I looked and there is no 3.x it is 3.5 or 3.6. I downloaded 3.6. Now I keep getting a alignment page and end up having to shut off my printer. I'm using way too much ink. I'm almost out with no hope of getting more ink until I get paid. I can't find anyplace that says to update a driver or that I need a plug-in or what might be I've done everything I know to do.wrong. It has new port cables. Do you have any idea what could be wrong? Do I need to uninstall the printer and reinstall it again? daisy

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

Flash doesn't work right under IE7 !

For some reason, the Flash's ActionScript command
ExternalInterface.call("window.location.href.toString") to get the
URL of the current active page doesn't work under Internet Explorer
7. (Adding an id doesn't seam to do the trick... although i am not
sure what value to give to this id) See code ...
I posted my problem in the flash forum but nobody answered...
Maybe someone here had the problem and was able to find some work
around !
I created a simple swf file with a simple actionscript on the
first frame to demonstrate the problem. Using the html code i also
paste below, you can reproduce the problem in less than 1 min.
Thanks for any help !

Thank you! I'm new to posting on forums. Browser Lab was all that was
listed.
Annie Oakley
President/Creative Director
Point Blank Studio, Inc.
705 Town Boulevard, NE, #700
Atlanta, GA 30319
404-963-2483 (office)
301-455-8018 (cell)
[email protected] (email)
www.pointblankstudio.com

I use GMail, says I do not have current version of FireFox, have 8.0.1 installed, now GMail doesn't work right, Fix?

I have FireFox 8.0.1 installed on my computer. I use GMail for my email. My GMail program keeps telling me I do not have the latest version of FireFox installed and that I am using an older version. My GMail program is not working right since my last update of FireFox. Is there a fix for this problem?

Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.2) Gecko/20090729 Firefox/'''3.5.2''' (.NET CLR 3.5.30729) '''FBSMTWB'''
Your user agent is stuck at Firefox 3.5.2 due to a extension during when you had 3.5.2 and it tacked on FBSMTWB' on end and kept it from updating the version number. This was due to the "Fast Browser Search toolbar" extension (FBSMTWB). This issue is not a problem with Firefox 4.0 and newer.
See this on how to reset it to normal. https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent

Timed sequence doesn't work right with external timing source

I'll describe first what I want to accomplish and
then maybe someone can read further and suggest why the attached VI
doesn't work. I have a SMU (PXI 4130) that takes differing amounts of
time to set a current depending on if the setting spans a range
boundary. I want to be able to make that SMU setting and then wait a
specific amount of time (sometimes 1 msec). If the SMU takes a little
longer to return then I want that extra time to come out of the wait
time. To do this I figured I would need an external time source to
control a timed sequence to give better than the normal 1 msec
resolution. So now onto the problems I'm having.
I've
got two problems here that I would really appreciate some insight on.
The attached VI is the subject of both problems (as is the VI is
worthless, but it illustrates the problem). Note that you need some
type of DAQ board with a counter on it to run it.
I can't
figure out why this timed sequence doesn't work with an external timing
source. It works mostly as expected (see next problem) with the
internal source, but fails miserably with the external source. Run the
VI as is to get a baseline. Then connect the DAQmx Create Timing Source
VI to the Source Name input of the timed structure. It seems like it
should run exactly the same both ways.
Problem 2 (run with the
internal timing source). The VI should take the same amount of time to
execute regardless of the input to the Wait VI (within reason of
course). That's actually the main impetus for this whole exercise. But
according to the Actual End indicator it runs faster with a longer wait
time.
George
Attachments:
test timed sequence.vi ‏144 KB

Hi George, I have been playing with the code that you have posted and I think I am seeing what your concern is with regards to the first problem that you stated. Without running the code I would expect both internal and external timing to cause the VI to run in the exact same manner, however obviously that is not the case. I am currently looking into this behavior and I will post you a response as soon as I have an answer for you.
As for the second problem, If you look at the manner in which you have coded this VI, a 1ms wait in the first frame will lead to a calculation of 1999ms wait in the second frame, and thus 5 iterations of 1999ms or about 99,995ms total running time. If you increase the wait in the first frame to say 50ms, then an overall all wait of 1950ms is calculated in the second frame so not the overall iteration time is now 1950 which, over 5 iteration leads to 99,750ms thus as you increase the wait in the first loop the overall loop duration will be less. This is expected behavior.
Again I will post back once I have a clarification on the internal vs external timing.
Chris_K
National Instruments
Applications Engineer

Palatino superscript doesn't work right

Similar Messages

Maybe you are looking for