Pallet Flags for Full Service

I am trying to create pallet flags for a non-palletized mailing. I have used the presort scheme automation letters. I am unable to create pallet flags in the file prep software, which says there are no mother pallets and thus no pallet flags. I need to have pallet flags to go full service.

In addition to what Elector has stated, nowhere does Verizon claim service in all areas. Never has. It is up to you to determine if Verizon's service will provide you the service you need in the areas you require it. If not, you should go with another provider. No provider has the best service in all areas and one persons needs don't necessarily coincide with anyone else's needs.
If you THINK you should be getting service at ALL times and in ALL locations, you should think again what cellular providers are selling. NO provider is selling that service. Simply because you THINK you are paying for an always available service in ALL locations does not mean that IS what you are paying for. IF that is what you want, you need to find another technology because cellular technology cannot do that, at least not at the current time.
In Verizon's coverage maps, it specifically states:
These Coverage Locator maps depict predicted and approximate wireless coverage. The coverage areas shown do not guarantee service availability, and may include locations with limited or no coverage. Even within a coverage area, there are many factors, including customer’s equipment, terrain, proximity to or inside buildings, foliage, and weather that may impact service. Some of the Coverage Areas include networks run by other carriers, the coverage depicted is based on their information and public sources, and we cannot ensure its accuracy.
Nothing in that statement guarantees service in any given location, in fact it points out that locations even in "full coverage" areas may not have service. If that is the case for you and you require service in that area, you should reconsider if Verizon is the provider for you.

Similar Messages

Deletion flag for service activity numbers

Hi all,
How to set the deletion flag for the service acitivity numbers in the AC03/AC06.

If the Service Entry Sheet is to be cancelled then go to ML81N and Select PO / SES and Click on "Change" Mode and Go to Menu Service Entry Sheet --> Set Status --> Revoke Acceptance.
The Procedure is Same for Cancelling the Release.
For Deletion of SES Press Shift F2 or Menu Service Entry Sheet --> Delete & Save.

Full Service and Palletization

We just started running a job as full service and I have a question. One of our business partners says that all full service pieces must be on a pallet. When I run presort palletization, not all the pieces end up on a pallet, because there aren't enough trays to create a pallet. The biggest problem is the pieces that fall to local entry where we may have several thousand pieces in presorted trays, but no pallet.
I tried setting the minimum pallet size to 1 for the local entry point, but that didn't change anything. If I remove the automated and regular letter schemes from the presort (with no palletization) then all those pieces fall to single piece rate with will cost us in postage and not be acceptable to the client.
Any ideas on how I should set this up to deal with non-palletized pieces in trays without losing full service?
Thanks.

I have heard this question more than once, and I keep going back to the Guide to Intelligent Mail Letters and Flats published on the USPS RIBBS website. I have copied some text below describing the requirements of Full-Service IMb mailings. There is nothing in the text which requires pieces to be palletized.
The Full-Service Option
Full-Service option mailings require a unique Intelligent Mail barcode on each mailpiece (see Section 2.4). The
Full-Service option IMb must include the same CASS-certified delivery-point ZIP Code information used to
populate the current POSTNET barcode, a USPS-assigned Mailer ID, the class of mail indicated in a Full-Service
option Service Type Identifier, and the optional endorsement line information in the Barcode Identifier if an
optional endorsement is printed on a flat-sized mailpiece.
The Full-Service IMb's Serial Number field, in conjunction with the mail class and the Mailer ID, is used to make
the IMb unique. Unique, Full-Service IMbs should not be reused for a minimum of 45 days.
Additional Full-Service requirements include the use of an approved electronic method to transmit mailing
documentation to the USPS. This documentation describes, among other things, how mailpieces are linked to
trays or sacks (if mail is prepared using trays or sacks), and to containers (if mail is palletized or placed in other
containers). The electronic documentation must match the preparation of the mail to qualify for the Full-Service
option.
The FAST system will be used, as defined in the Customer/Supplier Agreement (CSA), to create appointments for
origin-entered mail that is transported by the mailer. The FAST system is also used to schedule appointments for
drop shipment mailings (except for mailings entered at a DDU), which typically do not require a CSA.
Full-Service option requirements also include a unique Intelligent Mail tray barcode (IMtb), when mail is prepared
using trays or sacks, on each handling-unit label, and a unique Intelligent Mail container barcode (IMcb) on labels
placed on pallets or other containers when mail is containerized in that manner.
The guide can be found at http://ribbs.usps.gov/intelligentmail_guides/documents/tech_guides/GuidetoIntelligentMailLettersandFlats.pdf
May I ask your source for the "palletization requirement" for Full-Service IMb? We have talked to several people at the USPS and none of them have told us that Full-Service IMb requires palletization.
- Glenn

Set Deletion Flag for the Preventive Maintenance Order

Hi,
I need to set the Deletion flag for the Service Order. Deletion flag available in the screen disabled. Please suggest.
also I need know under which I shall be able to set such deletions.
Thank you,
Vijaya

Hi Vijaya,
Pls refer the help.sap.com related to deletion flag for PM/CS Orders. Some of the check criteria mentioned below for your reference.
Before a deletion flag is set, the following requirements must be met:
u2022 Any manually added purchase requisitions or purchase orders for the order must be deleted first.
The balance of the actual costs for the order must be zero. This means that the deletion flag can only be activated if the order has already been settled, or if no actual costs were incurred for the order.
u2022 Commitments relating to the order must be deleted.
u2022 Unprocessed and incorrect goods movements must be processed.
When the deletion flag is activated, all remaining capacity requirements are deleted. A deletion indicator is also set in any open material reservations.
An order that has been flagged for deletion cannot be changed. However, you can cancel the deletion flag.
Thanks
Siva
Edited by: sivakumar kasi on Sep 3, 2009 12:09 PM
Pls set the Order as Techically completed (TECO) and check the deletion flag set.
Thanks
Siva

Hold flag for service po

Hi,
Please let me know for service purchase order hold button is available or not. when Iam creating a purchase order with item category D (services), then immediately disappears the hold bottom, but other item categories hold button is appearing and possible to kept PO in hold mode. Is their any user exit or config. setting to appears the hold flag for service PO.
Thanks & Regards,
Ranjit.

Enjoy PO can't be put on HOLD. see the SAP help
                                                                                Note
Enjoy purchase orders cannot be put on hold if any of the following
criteria apply:
o The PO contains service items
o The PO contains "third-party" items
o Commitment errors are involved
o Subsequent (period-end volume rebate) settlement is involved
Example
You will find an example implementation under Goto -> Code Example.
In this example, the following behavior is defined:
In the case of stock transfers within a company code, the "Hold" function
     is generally inactive. If an application object contains an error of any
     kind, the function is likewise inactive.

Service Accounts for Browser Services and FD Launcher (Full-text Search)

I am setting up SQL Failover Clustering (Version: 2012SP1) on Windows 2012. There are 2 options to configure the service account for Browser Services and FD Launcher :
Option 1) Using separate domain accounts, as what I have done for DB Engine and SQL Agent.
Option 2) accept the default, which is local service for
browser, and virtual account for
FD Launcher. Per documentation URL: http://msdn.microsoft.com/en-us/library/ms143504.aspx
which is the recommended one? is it option 2?
There is security note on above URL as well, but does not clearly mention that option 1 is not recommended.
Security Note: Always run SQL Server services by using the lowest possible user rights. Use a
MSA or
virtual account when possible. When MSA and virtual accounts are not possible, use a specific low-privilege user account or domain account instead of a shared account for SQL Server services. Use separate accounts for different SQL Server services. Do not
grant additional permissions to the SQL Server service account or the service groups. Permissions will be granted through group membership or granted directly to a service SID, where a service SID is supported.

Hi Luo Donghua,
In SQL Server Brower, the default logon account is NT Authority\Local service and cannot be changed during SQL Server setup.SQL Server Browser is not a clustered resource and does
not support failover from one cluster node to the other. SQL Server Browser should be installed and
turned on for each node of the cluster. SQL Server Browser should be run in the security context of a low privileged user to minimize exposure to a malicious attack.
You can change the account after the setup has been completed; For more information, see:http://msdn.microsoft.com/en-us/library/hh510203.aspx.
In SQL Server full text filter daemon launcher, on Windows Vista and Windows Server 2008, the FDHOST Launcher service account also defaults to LOCAL SERVICE. If you provide a domain account in which to run the FDHOST Launcher service, we highly recommend
that you use a low privilege account. On Windows 7 and Windows Server 2008R2 , we use Virtual Account or Managed Service account(MSA) in FD Launcher . We also need to note the account you used for
FD Launcher should be different from the account that you use for the SQL Server service. For more information, see:
http://msdn.microsoft.com/en-us/library/cc281953(v=sql.100).aspx
So I recommend you use the option 2 to configure the service account for Browser Services and FD Launcher.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

HT4993 I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the mo

I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the moment???

Settings > General > Reset > Reset Network Settings

How long does it take for the phone to get full service after you insert the sim card???

I got my Droid Incredible in the mail today, and inserted the sim card and somehow online I think I deactivated my old phone, and I've been waiting for my new phone to receive full service for maybe over an hour now. I cannot call customer service or anything because both my old and new phone cannot make any calls because neither of them are activated. Please help!

I had a similar issue activating by HTC DNA. The activation instructions Verizon sends are horrible since they explicitly mention that you do not need to call in to activate your phone. I left my SIM activation running overnight and it just didn't work. I finally called Verizon from my work phone the next day and the agent informed me that you do need to call to activate your SIM card. You will need to have your SIM card ready when you call (to provide the long string of numbers on the back of the card). Hope this helps!

My Iphone 4 at random times, just wont send messages for around an hour even if i have full service, its always up to date so its not that but any help on what this could be?

My Iphone 4 at random times, just wont send messages for around an hour even if i have full service, its always up to date so its not that but any help on what this could be? It could just be my network being a pain in the *** but im not sure, help me out here people !

never had that problem or heard about it so my bet is a network issue

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

Display All Marked / Flagged for Follow Up Emails Separately

Display All Marked / Flagged for Follow Up Emails Separately
I was wondering, is there actually a way to display flagged emails in some sort of folder or separate view at least, as it is common within desktop mail applications and any other user interfaces from free email providers like Gmail, Yahoo!, or AOL and the likes?
It's very complicated and not very user friendly to mark an email for follow up, because you need to decide at what point in the future you want to be reminded. When that day arrives and you're not ready to reply yet, you will have to go through each follow up email again and repeat those steps to re-mark them for a later date. And that is really annoying. Or am I missing something here?
Can't I just simply mark my emails, like, star them in order to review them later and to be able to have a look at them from time to time, just like it is possible in other applications or in your browser?
I have noticed that there is an option to star an email within a Gmail account, but I'm not quite convinced that they sync both ways properly anyway. Also, that feature doesn't come with all email services. For example, how would I star an email in my AOL account?
I understand that BlackBerry is not based on IMAP and therefore has its limitations, however, it would be nice if there was another solution for this, or an explanation at least. It's simply impossible to go through hundreds and thousands of emails in order to find a flagged email.
It's already a pain that the emails themselves won't sync (read/unread) with your desktop and other devices, but do you have any advice or workaround to improve the synchronization of flagging or starring?
I have been using BlackBerrys for many years now, and I really still enjoy them, but the fact that it isn't based on IMAP is a big downside and no longer up to date. Times really have changed.
Another thing: When I mark as follow up, the default time always seems to be 5 p.m. -- probably because the calendar day starts at 9 AM and ends at 5 PM by default. I thought changing the "day ends" option would do the trick and also change the default time for the reminder, unfortunately it isn't. Is there another way to change that, or will I have to set the time manually every time?
Your help is very much appreciated.

Display All Marked / Flagged for Follow Up Emails Separately
I was wondering, is there actually a way to display flagged emails in some sort of folder or separate view at least, as it is common within desktop mail applications and any other user interfaces from free email providers like Gmail, Yahoo!, or AOL and the likes?
It's very complicated and not very user friendly to mark an email for follow up, because you need to decide at what point in the future you want to be reminded. When that day arrives and you're not ready to reply yet, you will have to go through each follow up email again and repeat those steps to re-mark them for a later date. And that is really annoying. Or am I missing something here?
Can't I just simply mark my emails, like, star them in order to review them later and to be able to have a look at them from time to time, just like it is possible in other applications or in your browser?
I have noticed that there is an option to star an email within a Gmail account, but I'm not quite convinced that they sync both ways properly anyway. Also, that feature doesn't come with all email services. For example, how would I star an email in my AOL account?
I understand that BlackBerry is not based on IMAP and therefore has its limitations, however, it would be nice if there was another solution for this, or an explanation at least. It's simply impossible to go through hundreds and thousands of emails in order to find a flagged email.
It's already a pain that the emails themselves won't sync (read/unread) with your desktop and other devices, but do you have any advice or workaround to improve the synchronization of flagging or starring?
I have been using BlackBerrys for many years now, and I really still enjoy them, but the fact that it isn't based on IMAP is a big downside and no longer up to date. Times really have changed.
Another thing: When I mark as follow up, the default time always seems to be 5 p.m. -- probably because the calendar day starts at 9 AM and ends at 5 PM by default. I thought changing the "day ends" option would do the trick and also change the default time for the reminder, unfortunately it isn't. Is there another way to change that, or will I have to set the time manually every time?
Your help is very much appreciated.

Confirmation of 2 Services for a Service PO

Hi All,
We are using SRM 3.0, EBP 4.0 ECS.
We create a Service PO in SRM and have 2 Services (items) for the Service PO. While doing confirmation in SRM both the services are available. If we confirm one Service (item) for the full quantity and then go back to the same PO and try to confirm the other Service (item) - it states "PO 35xxxxxxxx contains no items for confirmation". i.e it does not allow us to confirm another service if any of the service (item) has been confirmed for the full quantity.
Note that there is no issue in case of a Goods PO. Also there is no problem if we confirm the full quantity for both the services at one time or have confirmed partial quantity for one service (item). Problem arises only when one service has been confirmed for the full PO quantity.
Any pointers on this will be highly appreicated.
Thanks in advance,
Francis

Hi Muthu,
We have checked and found that these notes have already been implemented. But still the problem persists.
Let me know if there are any other suggestions.
Regards,
Francis

Limit PO Err Combination of GR/IR control not allowed for external services

Hi,
I am having a problem while replicating free text Limit PO's to R/3 in SRM 4.0 SP 13. The issue is while creating Free Text Limit SC with the "Confirmation and Invoice" option checked in, the PO's get created in SRM but fails while replicating to R/3 and in RZ20 errors as "Combination of GR/IR control not allowed for external services" although in vendor master i don't have check for the field "GR-Based Invoice Verification".
On the contrary while creating SC with the "Invoice Only" the PO is successfully replicated to R/3 with item category as B for limit orders.
Now i have noticed if i make changes in the vendor master data i.e. check the flag "GR-Based Invoice Verification" then the PO in my first scenario gets replicated successfully and also with respect to the second scenario but it gets replicated in both the scenarios as item category "D".
As far as SRM standard it should have ideally behave like the below:
Limit SC with GR AND Invoice -> item category D
Limit SC with invoice only -> item category B.
Now my question is why do my PO's fail in R/3 in the first scenario and also if i check the flag in vendor master for GR-Based Invoice verification then in the second scenario the item category is "D" instead of "B".
Thanks in Advance.
Best Regards
Anirban

Hi Georg,
We don't have any active implementation for the BADI BBP_PO_INBOUND_BADI.
Best Regards,
Anirban

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

Timed out waiting for ccmexec service to be fully operational

We are deploying Windows 7 in an SCCM 2007 R3 SP2 environment. Some of the clients we target fail the task sequence with the error, "Timed out waiting for ccmexec service to be fully operational". Below is the relevant part of the SMSTS.LOG
file:
Succeeded loading resource DLL 'C:\Windows\system32\CCM\1033\TSRES.DLL'
Failed to create an instance of COM progress UI object. Error code 0x80040154
Timed out waiting for ccmexec service to be fully operational
0, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\utils.cpp,4192)
Failed to wait for Ccmexec service to be fully operational (0x80004005)
I have seen several posts with this error that say to create the "ConfigMgr Remote Control Users" group.
Here is an example. We have created this group locally AND on the domain, but we still see this failure on about 10% of clients that we target. Any other ideas what might be creating this issue?
Thanks,
FP

After a restart in the task sequence (not the same restart every time) the ccmexec process doesn´t seem to want to start again. The problem is intermittent and does not occure on every installation, though quite frequently.
In the smsts.log you get "waiting for the ccmexec process to start" and "Waiting for CcmExec service to be fully operational", eventually it times out and the installation fails. If we start a command prompt and start the service manually
the installation continues though.
The strange thing is, this only seems to happen on a specific computer model. We have tried updating BIOS and drivers to the latest version, but no success.
Last lines of smsts.log
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
End TS policy compilation TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Get Install Directory for SMS Client TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Updating settings in \\.\root\ccm\policy\machine\actualconfig
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 437 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:GAV successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:GAV") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:GAV successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 0 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 9 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
RequestedConfig policy instance(s) : 34 TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Total RequestedConfig policy instance(s) : 480
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
New/Changed ActualConfig policy instance(s) : 0
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Policy evaluation initiated TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_RebootSettings.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_RebootSettings.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Query = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"'
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Verified policy for instance path 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Policy verification done TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Config policies compiled successfully TSManager
2014-09-15 09:53:19 2244 (0x08C4)
_SMSTSReturnToGINA variable set to true TSManager
2014-09-15 09:53:19 2244 (0x08C4)
Waiting for CcmExec service to be fully operational
TSManager 2014-09-15 09:53:19
2244 (0x08C4)
Succeeded loading resource DLL 'C:\Windows\CCM\1033\TSRES.DLL'
TSManager 2014-09-15 09:53:20
2244 (0x08C4)
Launching command shell. OSDSetupHook
2014-09-15 09:54:28 2212 (0x08A4)
Windows station: WinSta0 OSDSetupHook
2014-09-15 09:54:28 2212 (0x08A4)
Desk"Apple-tab-span" style="white-space:pre;"> OSDSetupHook
2014-09-15 09:54:28 2212 (0x08A4)
executing command: C:\Windows\system32\cmd.exe /k
OSDSetupHook 2014-09-15 09:54:28
2212 (0x08A4)
executed command: C:\Windows\system32\cmd.exe /k
OSDSetupHook 2014-09-15 09:54:28
2212 (0x08A4)
Also some errors in the ccmexec.log, if they have anything to do with it:
Messaging::Initialize(), HRESULT=80080005 (e:\nts_sccm_release\sms\framework\messaging\ccmexec\init.cpp,951)
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
Error initializing messaging subsystem (0x80080005).
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
Released system busy flag after ccmexec initialization.
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
Phase 1 initialization failed (0x80080005).
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
*** System is now free to go to sleep CcmExec
2014-09-15 09:54:04 2376 (0x0948)
Init_Phase1(), HRESULT=80080005 (e:\nts_sccm_release\sms\framework\messaging\ccmexec\entrypoint.cpp,2528)
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
Phase 1 initialization failed (0x80080005).
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
pTask->Execute(pService, pState, ulFlags), HRESULT=80080005 (e:\nts_sccm_release\sms\framework\ccmtask\taskexec.cpp,108)
CcmExec 2014-09-15 09:54:04
2380 (0x094C)
ExecuteTask() failed with HR = 0x80080005 CcmExec
2014-09-15 09:54:04 2380 (0x094C)
SERVICE_CONTROL_POWEREVENT(Event=PBT_POWERSETTINGCHANGE)
CCMEXEC 2014-09-15 09:55:48
1900 (0x076C)
SystemTaskProcessor::QueueEvent(PowerChanged, 0)
CCMEXEC 2014-09-15 09:55:48
1900 (0x076C)
SystemTaskProcessor::QueueEvent(PowerChangedEx, 0)
CCMEXEC 2014-09-15 09:55:48
1900 (0x076C)
//Fredrik

Pallet Flags for Full Service

Similar Messages

Maybe you are looking for