Pallete Not Showing Controls in Net Beans 7.0

Hi I am New in Javafx . I Installed the Net Beans 7.0 with Javafx Bete 2.0 ,But in Net Beans The Pallete not Showing the Controls.
Please Help me Camp....
Thanks in Advanced.

This has already been discussed here: Re: JavaFX 2.0 with Netbeans 7.0 - Palette not visible
Doesn't sound like JavaFX 2.0 has one yet and remains a work in progress.

Similar Messages

Crystal report Viewer Not Showing Control Bar Button Icons

Hi
I am using Crystal report along with .net 2003 in web application.
While executing, the report its not showing any errors,but the control bar buttons(print, export, next page last page, previous page, first page, etc ) are showing without there icons.
These invisible buttons can be found by placing the mouse over the specified area, then it shows the tool tip like print etc.
Please give me solution.

Would you like to have a look at these:
[1.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303336333633373339%7D.do]
[2.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133383333333933313333%7D.do]
[3.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303332333533323337%7D.do]
[4.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313338333733363334%7D.do]
[5.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333333303335%7D.do]
[6.|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393338333833393338%7D.do]
Hope this helps!
AG.

Quicktime embed not showing controls

I have several embedded quicktime movies on my website, for some reason they do not show the controls even though the embed and object tags specifically say to controller=true.
Is this a factor of the file itself, what is the fix?

Adding a controller requires you add 16 pixels to the actually file height.
e.g. a 320X240 QuickTime file would use 320X256 in the html page code.

Create Data Control not showing in EJB Session Bean context menu

Hi All,
I've been studying the new Oracle Application Development Framework Tutorial for 10g Release 3 (10.1.3). When I get to page 2-16 (page 31 of the PDF doc) it says to create ADF Data Control. Specifically is says " In the Applications Navigator, right-click the SRPublicFacadeBean.java node and choose Create Data Control from the context menu."
But my context menu doesnt have the Create Data Control option. I double checked that I didn't miss a step in the tutorial. I'm sure it's something simple. Can anyone point me in the right direction? Is there another way to create the Data Control for an EJB Session Bean?
Thanks,
Cary

I downloaded "jdevstudio1013.zip " and I still don't have this context menu?
What are the steps to correct this?
Thanks,
--Todd
Figured it out. I was having an extension issue and I had to turn off all of my extensions. Thus, turned on the ADF extension (duh!) and all was well.
Message was edited by:
jtp51

Front panel not showing controls

i have encountered a very strange thing where very often all of my front panel control displays will disappear. Closing and reopening the vi does not really solve the issue either. none of the controls should be hidden....
where the panels should be:
but arent:

vi should be attached
Attachments:
odor controller 8+1.vi ‏76 KB

Color Correction Effect Controls Not Showing Controls

The recent upgrade seemed to work flawlessly until I tried to go back to some color correction I had started earlier. In some cases, when I click on the Video Effects tab in the Color Correction workspace, my controls are there and working. For others, when I click on the Video Effects tab, there's simply nothing there. I have dragged effects back onto the clip and then gone back to the Effects tab, and still see nothing. Has anyone else had this problem? Any thoughts?

I have the same problem. I've tried removing all effects, adding more effects etc, but in the Effect Controls window all I get is the name of the clip highlighted in blue. I've also gone to Window and selected Effect Controls, but all this does is reveal or hide the Effect Controls tab. The Motion, Opacity etc controls are not there when I click on the tab. Anyone have any ideas how to get the Effect Controls back?

Members of Domain Local Groups not showing up through net group command

Hello,
I am trying to get the list of members in a Domain Local Group using "NET GROUP" command, but unable to get the member list.
I get the message "group not found", whereas members of Global Groups are visible.
Thank you in advance !

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.
This is only one forum among the many that are on the TechNet Discussion Forums, and given your post, you likely chose the wrong forum.
This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please don’t ignore it.
The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums
are also here: http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the
MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!
Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem
you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have
a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks
MSDN and TechNet Subscriptions Support
Did Microsoft call you out of the blue about your computer?
No, they didn't.

Quicktime does not show controls in Safari

Is it a Safari issue or QuickTime? Any1 had the same problem?
Thks,
Biga

The controller in your example doesn't use the standard QuickTime controller and, instead, uses special javascript code to load its own controller.
The examples work just fine for me:
http://www.apple.com/sg/mac/

Control pannel not showing some installed programs

my os is win 7 and my control pannel is only showing google chrome and microsoft . net framework 4 client and ms office enterprise.but i have installed many programs such as mozila,adobe reader,avast antivirus and so many others but they are not showing
in my control panel programs..but at present they are working properly they are opening i am not having trouble with that..but i want to uninstall some programs and not finding a way i used even c cleaner tools but of no use..i started system scan but of no
use..pls suggest a solution

Hi,
When you launch Control Panel\Programs and Features, aren't you able to find the installed programs there?
All programs icons stored under control panel\Programs and Feature are related with registry keys
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
and
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432node\Microsoft\Windows\CurrentVersion\Uninstall (64 bit system)
If these keys are corrupted or you don't have enough permissions on these keys, then the program icons will not be displayed under Programs and Features.
Yolanda Zhu
TechNet Community Support

Tab control does not show up

Hello, I am still using Labview V8.21 on XP. I know, I know, should be using my 8.6 but do not have a DVD drive.
Anyway, I am trying to do some support on a VI originally written in V6.1 and updated to V7.1 The problem is, there is a tab control on the front panel that will not show up, it is on the block diagram, labview will not really find it, but thinks it is still there, the front panel is just blank and really big. Looked all over, nothing on the front panel. Any ideas why this would happen or how to get around rewritting the whole VI? I doubt a rewrite will occur, as a company we have moved to .NET and the product will probably be either discontinued or redone in .NET if I cannot get a work around here.
thanks.

cannot color the control or the VI to make it show up. Here is a post, this is a big VI and alot of error will show up as I am not posting the whole thing, just the TL vi that has the tab control problem.
This is one thing that made me leave Labview, all eggs are in the VI basket, if it fails, you are done, unlike .NET that you can open the source with a text editor if you have to.
Attachments:
ST_TL.vi ‏2071 KB

Disable remote control IR receiver is not showing up in system pref.

My remote for my iMac is not working. I originally thought it neeeded a new battery but that was not it. I had a power outage the other night and since then have been noticing the problem.
The apple support says;
'To turn on IR reception:
Open System Preferences and click Security.
Deselect "Disable remote control infrared receiver.'
When I go to system preferences and then security, the option to 'disable remote control infrared receiver' does not show up.
Yesterday I restarted and the option came back, this morning after turning my computer on it wasn't there again. Any idea how to resolve this problem for good?
Thank you
Dan

The next time you notice the line gone from the System Preferences, open up your System Profiler (from the /Applications/Utillities/ folder) and check to see if the "IR Receiver" is listed under the USB section in Hardware.
If it doesn't appear there, then perhaps you're having some kind of failure of your receiver? If it does appear there, then it would seem more likely that you're having some kind of preference file or setting problem.
-Doug

On my iphone4s, music control do not show up on the screen and the screen cannot be rotated.

On my iphone4s, music control do not show up on the music screen and the screen cannot be rotated.

Couple of clarifications, the rotation lock is not set. The controls are visible for video and other apps. Only the music screen does not rotate or show the controls.

I have photo sharing turned on, on both my Iphone 5 an my PC Icloud control panel but yet my pictures will not show up on my PC, how do I fix this?

I have photo sharing turned on, on both my Iphone and my PC icloud control panel, however my pictures will not show up on my PC how can i fix this?
I had a previous problem with this with my old iphone 4 and did not realize there was an issue until it was stolen. I would like to get this straightened out just in case anything ever happens with this phone.
Thank you in advance for any help.

Hey LBert7,
I would try the recommended steps in the following article:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Welcome to Apple Support Communities!
Take care,
Delgadoh

My Websites are not showing up on the Creative Cloud Control Panel

Hi guys,
For some reason, just recently, my websites that I have hosted with BC, that I have built for clients, are not showing up on the right control panel? Usually when I load up CC, it shows the Website text as ...loading, then my sites appear... now, nothing.
Help!?
Thanks,
Aaron

This seems to be a bug with Creative Cloud. I am encountering the same issue. We've gone ahead and notified the product team, but for now, you can access your websites by directly logging into Business Catalyst: http://www.businesscatalyst.com/admin/Index.aspx. Use the same log in information that you use for your Creative Cloud memberhsip.
Thank you for bringing this issue to our attention! Hopefully we'll get it sorted out soon.

AirPlay not showing on iPad anywhere. I've tried ation and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

AirPlay not showing on iPad anywhere. I've tried all of the rebooting functions and checked the control centre to no avail. The wifi networks are the same. Please help, thanks.

To use AirPlay, you need the following:
1. iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
2. Apple TV (2nd or 3rd generation)
3. AirPort Express
4. Wi-Fi (802.11a/g/n) network
http://support.apple.com/kb/ht4437

Pallete Not Showing Controls in Net Beans 7.0

Similar Messages

Maybe you are looking for