Palm 130 software needed for new windows vista

smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Hi, and welcome to the Palm Community Forums.
Please visit the Windows Hotsync board, where you will find many threads about synchronizing older Palm devices like the m130 to a Vista computer, including this one which is stickied near the top of that board.
You'll need to use Palm Desktop 6.2.2 and a free utility from www.pimlicosoftware.com called PalmHotsyncSetup. Note, this will only work for 32-bit Vista. There are no 64-bit USB drivers. If your desktop is Vista 64-bit, you will be limited to IR (infrared beam) sync, which will also require an IR adapter for your computer.
While I'm at it, I will relocate this thread to the Windows Hotsync board.
Message Edited by smkranz on 06-29-2009 10:24 PM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Similar Messages

HP Director software needed for new computer with windows 8

I have a Deskjet 5510 and went from Windows XP to a new computer with Windows 8 (64 bit). The driver installed when I plugged the printer in, but I haven't been able to find HP Director to install. I tried to do an install from the website, but it just told me that the driver was already installed correctly. The Director is a pretty important piece of the printer, can I get it back?

Hi, due to the age of the printer HP does not support 5510 in Win8.
Take a look at this link for further info & workarounds.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

I need to download adobe flashplayer 11 for my windows vista so that i can play farmville.

I need to download adobe flash 11 for my windows vista so that i can play farmville, at the present it will not load my game, any suggestions?

Did you try downloading Flash Player from the standard download page http://get.adobe.com/flashplayer/ ?
What happens when you try?
What is your operating system?
Did you check
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html
[topic moved to Flash Player forum]

Which version of Flash Player do I need to download for a Windows Vista 64bit system?

HELP!!!!
I have looked and looked on the webside for which version of Flash Player I should download for my Windows Vista 64 bit system!

Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

HT4759 I tried to download icloud for pc windows vista with 2.1.2. and when download was almost complete it said it belonged to another user unknown to me so I stopped the process how do I start over?

I tried to download icloud for pc windows vista with 2.1.2 and when it was downloading almost finished it said it belonged to an unknown to me user?

You need to explain that, before you finished downloading something said that it belonged to another user ?
What said that, can you post a screenshot?

I-tunes not kompatibel with Windows 8. Every time I want to load my Ipod or Iphone I have to change the compability to, for instance windows vista. Otherwise Itunes refuse to recognize my Ipad/phone. Can I expect that Itunes will "fix" this problem? Carin

I have problems with I-tunes and the compability with windows 8. Every time I whant to load my Ipod/Iphone Itunes doesn´t recognize the pod/phone. If I change the compability to for instance windows vista it works ok.
I guess that I need some update of Itunes?
carin

Hey carin205,
I would run through the troubleshooting steps in the following article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Welcome to Apple Support Communities!
Regards,
Delgadoh

How to link Palm M500 to Outlook 2003 using Windows Vista

Hi! Not computer savvy so need some assistance on how to link Palm M500 to Outlook 2003 using Windows Vista. Not sure if my Palm is too old to work with the others. Any suggestions would be greatly appreciated!
Thank you!
Post relates to: Palm m500

http://kb.palm.com/wps/portal/kb/na/m-series/m500/unlocked/solutions/article/37014_en.html

Which is the software needed for an installation on a production server

Hi,
which is the software needed for an installation on a production server (windows 2008) of Forms/Reports 11g ?
I mean the old 10g stand alone forms and report service but un 11g release ..
Regards

For application deployments (production), you will need the following software. The same is true for a design-time environment.
1. Weblogic Server 10.3.2
2. Fusion Middleware 11.1.1.2
See my update in the following:
Re: Some FORMS quesion...
All products are contained within the Fusion Middleware (Forms, Reports, Portal, Discoverer) distribution. This includes Builders, Runtime components, HTTP Server, Web Cache, etc. During the installation process, you choose which you want to install.

Can I install Photoshop 7 onto my new Windows Vista?

Hello,
My new Windows Vista is a 64 bit. Can I safely install my old Photoshop 7, which is probably 32 bit, onto my new Windows Vista? What kind of problems could there be?

>Is CS3 terribly different than Photoshop 7?
nope. just has some new features. everything you used to do, you still can.
> I guess I just want to keep on doing the same things that I used to do on my Photoshop 7. I'm not a professional and am just scanning and touching up my old photographs and negatives.
well i can say it does offer lots of improvements for that. i'm not a pro either and i use it for pretty much what you do, plus making things like invitations and thank you cards and the like. things like smart sharpen and the hilight/shadow adjustment setting and photo filters and the healing tools really make working with your old photos so much easier than with 7! i'd say the upgrade is worth it just for the hilight/shadow stuff. you'd be amazed at how much detail there is in many pictures that look almost totally black to the eye!
and like we said, if you want a feature later, you're going to wind up paying full price again instead of just the upgrade price because when cs3 came out, they instituded a no upgrades prior to 3 versions back. right now that's 7. when cs4 comes out, people with 7 lose their ability to buy at upgrade price.

Software needed for the USB device, "USB Interface Controller TEST2.0"

My mother recently acquired a digital camera. She acquired it from a second-hand store, which did not include an interface cable or software. The manual (and the USB port on the camera) indicates that a male-male USB cable is necessary for photos to be copied to the hard drive.
I was not successful in locating such a cable at any local electronics store (I assume such a cable is now out-of-date). I purchased one from a seller on eBay. The brand is "e circuit electronics".
Upon powering up the camera with the cable connected to it and the computer, the following message appeared:
"Software needed for the USB device "USB Interface Controller TEST2.0" is not available. Would you like to look for the software on the Internet?"
I clicked "Yes". After an approximate two-minute wait, another message appeared stating:
"Software Update is not able to connect to the Internet. Please check your configuration and try again."
I deleted, "Software Update Preferences" in the Preferences folder inside the System Folder, without solving the problem. How do I solve the issue of allowing Software Update to connect to the Internet?

Thank you for your continued assistance, BDAqua. Unfortunately, the driver you linked to does not seem to be compatible with the camera. It is a driver for the V20 model, whereas my model would correspond to be a V2755, as referenced from a list of other Vivicam models when during a search at the Open Drivers web site.
From the system requirement about the card reader you gave me, it will not work, as this system is running 9.1. I am hesistant to upgrade this computer to 9.2, as I have experienced system unstability with that version, with even the 9.2.2 update applied.
In the mean time, I have e-mailed Vivitar regarding this issue, but have as of yet received a reply.
I am not certain as to other specifics to give you, in order to solve the Software Update problem. Please elaborate.
Yes eww, the computer in question is able to fully connect to the Internet for all that I need. I am fully aware of the difference between a computer connecting to the Internet, and a computer connecting to a digital camera. I have 15 years of Macintosh experience.

Cairo-compmgr-git and shadows for new windows

Hi, I'm using stand-alone Openbox and installed cairo-compmgr-git from AUR. Everything seems to work fine except for one thing, shadows don't get drawn for new windows, just for the ones I have already open when I run "cairo-compmgr -n". This doesn't happen with cairo-compmgr from the community repository, but with this version, conky windows have shadows. Xcompmgr-dana works fine also, but the entire screen flickers when dragging things around. Any ideas? Thanks in advance.

I got the same problem today after a normal update, now the cairo-compmgr from the community repo is having the same issue. I deleted the config file from ~/.config/cairo-compmgr and nothing.
Some help will be appreaciated

Palm Treo 700p Cannot install. Windows Vista looking for Drivers

Installed Palm software and synced on my Dell with no issues.
Went to install on 2nd PC with Windows Vista Home. Issues. Got new download for Vista 32 and downloaded off site.
Same error puts me in a circle. System finds new hardware. Looks to install driver. Can't find Drive on CD or Hardrive and so keeps in loop. Cannot finish 1st "sync" without driver so install does not complete.
Please advise:
Can I use the Palm device on two seperate PC's (One on NT running fine..now adding Vista Home).
How do I get the drive installed?
How do I be sure NOT to overwrite the data on the Palm when I sync the 1st time on the 2nd pc.
Thanks
Post relates to: Treo 700p (Verizon)

Hello jpmill2 and welcome to the Palm forums.
1. Please make sure that your Windows Vista account is a member of the Administrators group. I would also be sure to check that antivirus software is disabled during the install process.
2. You can use the Treo 700p with more than one computer. I sync my Treo with my office PC running Windows XP SP2 and my Vista Business SP1 machine at home. (And a Mac, just for good measure.)
3. The USB driver for the Treo 700p is obtained by installing Palm Desktop 4.2 (bundled on the Treo 700p software disc) or by installing Palm Desktop 6.2 by ACCESS for Windows [Vista]. You should install the software first, and then connect the Treo after the install is complete. If prompted to HotSync during the install, I aways Skip it.
4. If you Skip the HotSync during the Palm Desktop isntall, you can create a new HotSync ID on the computer with the same name as the HotSync ID on your Treo. Then set the conduits to Handheld overwrites Desktop and then sync.
Hope that helps,
Alan G
Post relates to: Treo 755p (Sprint)

Storage capacity needed for installing window OS and lots of educational software in window OS

I going to buy 13" MacbookPro with Retina Display with 2.6ghz i5 dual core processor and 8GB RAM.
I need to install Window 8.1 Pro and mutiple(a lot) of educational software inside Window OS.
128GB or 256GB PCle-based flash storage should I choose to make sure enough capacity and smooth performance to me?
Thanks.

You may want to inquire in the Boot Camp forum here:
Boot Camp
to see if Windows can play well with the Retina display.
If those wise people say it does not, consider the entry level non-Retina 13-inch MBP. It comes with a 500GB conventional hard drive with the option of a 1TB drive, still has a DVD drive, and you can upgrade RAM yourself--it's a ten-minute job. Another plus is that model seems to have very few reports of mechanical trouble in these forums.
However, if all you want to run is Win, I cast my vote with Esquared: consider a Windows laptop. You can get a 17-ich i7 for much less than any Mac notebook.

Qosmio G20 Vista drivers? Not needed to install Windows Vista

Hello,
I am new at this forum. My name is Francisco and I live in Brazil. I own a Toshiba Qosmio g20_105 and it is running Windows Vista Ultimate EN RTM 6000 without problems.
To do this, you must perform a fresh install of Windows Vista. The drivers for network (Intel PRO100),for audio (Soundmax), for TV (Toshiba PCI Tuner), modem (toshiba modem), Alps pointing device are installed directly from microsoft. You must install Toshiba nvidia display driver, Toshiba Bluetooth (monitor and stack), Toshiba texas flash media driver, toshiba RAID (driver and utilities), toshiba remote control manager and ConfigFree for Windows Vista.
You must have the Toshiba RAID drivers to install from the windows Vista DVD. Otherway, Windows does not recognize Toshiba RAID 0 and RAID 1.
Below some pictures of my G20 Desktop screen:
http://www.rabayjr.com/vista/myqosmiog20screen1.jpg
http://www.rabayjr.com/vista/myqosmiog20screen2.jpg
http://www.rabayjr.com/vista/myqosmiog20screen3.jpg
And here is an example of using deskscapes animated backgrounds with Windows Vista, called dreamscene.
It is in paused mode
http://www.rabayjr.com/vista/myqosmiog20screen4.jpg
To perform a fresh install of windows Vista:
Please, download the Toshiba RAID drivers from here:
http://www.rabayjr.com/vista/drivers/raid.rar
1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
2. Insert your Microsoft Windows Vista Edition Bootable DVD.
3. Power on your computer and press F12 to display the boot menu.
4. Choose the option to boot from the CD/DVD drive.
5. On the first setup screen, choose your language options then press "Next".
6. Press "Install Now".
7. Type in your Product Key then press "Next".
8. Accept the license terms by checking the box then press "Next".
9. When asked "What type of installation do you want", press "Custom (advanced)".
10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
11. Browse to the location you have copied the RAID drivers to then press "OK".
12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
13. Make sure the TOSHIBA RAID driver is selected then press "Next".
14. Continue the installation of Windows Vista as normal.
Now you will need the Toshiba drivers for your Qosmio G20:
See the Device manager info:
http://www.rabayjr.com/vista/qosmiodrivers1.jpg
Drivers:
1. SD memory controller
http://www.rabayjr.com/vista/drivers/SD_memory.rar
2. Bluetooth monitor and stack
http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
3. Nvidia display driver GeForce Go 6600
http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
4. Texas FlashMedia controller
http://www.rabayjr.com/vista/drivers/flasmedia.rar
And finally the Toshiba utilities:
Toshiba Configfree
Toshiba Assist
RAID utilities
Remote control manager
Toshiba SD Memory utilities
That's it...
So I must tell to you that Toshiba Qosmio G20 is Windows Vista Ultimate capable, indeed.
Hope this helps people who need and want to install Windows Vista Aero on their Qosmio G20 machines.
Message was edited by: FranciscoJr

UPDATED POST: On March 08, 2007
This is a step by step guide for those of you with problems to get Windows Vista functional on your G20 Qosmios
Use a Windows Vista English Version RTM Ultimate 6000 DVD for installation.
1 Backup your personal files and important data to a removable device, CD, DVD, flashmedia, pendrive, etc...
2.Check your Qosmio player installation. if nedeed, reinstall it with the latest version (multilanguage), posted on Toshibas site (download drivers section).
3.Download and copy the Toshiba RAID drivers to a removable media
Please, download the Toshiba RAID drivers from here:
http://www.rabayjr.com/vista/drivers/raid.rar
4.To perform a fresh install of Windows Vista, Follow the steps below
-1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
-2. Insert your Microsoft Windows Vista Edition Bootable DVD.
-3. Power on your computer and press F12 to display the boot menu.
-4. Choose the option to boot from the CD/DVD drive.
-5. On the first setup screen, choose your language options then press "Next".
-6. Press "Install Now".
-7. Type in your Product Key then press "Next".
-8. Accept the license terms by checking the box then press "Next".
-9. When asked "What type of installation do you want", press "Custom (advanced)".
-10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
-11. Browse to the location you have copied the RAID drivers to then press "OK".
-12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
-13. Make sure the TOSHIBA RAID driver is selected then press "Next".
-14. Continue the installation of Windows Vista as normal.
5. Go to Microsoft update and download all important updates available. If you wish you can install your native language, if other than English, from the Microsoft site.
let Windows install all the drivers found for your Qosmio G20.
6. Reboot your machine and follow with the steps below.
DRIVERS YOU MUST INSTALL:
1. Alps pointing device driver (This is from Alps and working fine with your Qosmio G20)
http://www.rabayjr.com/vista/drivers/alpsdriver.rar
http://www.rabayjr.com/vista/qosmioalps.jpg
During the installation, Windows will complain that you are installing an early device driver. Do not attempt to this, Install it anyway.
This is because the Windows driver for this device is originally installed with a more recent date and version from that you are trying to install.
But the driver posting here is the correct from the Alps for your Qosmio g20.
2. Bluetooth monitor and stack
http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
3. Nvidia display driver GeForce Go 6600
http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
To install the nvidia 97.52, you must do it manually:
open the Device manager
look for the Video adapter/nvidia Gforce go6600
Driver update options
Look for a driver in computer
Choose a list of device drivers in computer
With disc...
Lool for the place you've extracted the nvidia 97.52.rar
Find the nvts.inf and open it
You will come to the following screen:
http://www.rabayjr.com/vista/qosmionvidiainstall.jpg
From a list choose your video card (go6600) and install it.
If you think it is difficult, please see the VIDEO Nvidiainstall.avi:
http://www.rabayjr.com/vista/drivers/nvidiainstall.rar
After the extraction, play it with Windows media Player
4. Texas FlashMedia controller
http://www.rabayjr.com/vista/drivers/flasmedia.rar
5.SoundMAX integrated digital audio. Driver 5.12.1.5410
http://www.rabayjr.com/vista/drivers/soundmax5.12.1.5410.rar
run the setup.exe and at first remove the driver you have installed on your Qosmio G20.
reboot the computer
Run the setup.exe again and install the new driver. At some install point, Windows Vista will need a confirmation, if you trust Analog devices incorporated to goes on..
http://www.rabayjr.com/vista/qosmiosoundmaxinstall.jpg
Continue with the installation and after finishing the process, test the functionallity of the new driver
OR
If your G20 model is using the Sigmatel HD audio chipset, so you must install other driver than the Soundmax integrated digital audio
It is the SigmaTel HD Audio Driver for Windows Vista Version: 6.10.0.5324
link:
http://www.rabayjr.com/vista/drivers/sigmatelhd.rar
6.Intel PRO Wireless 2200BG Vista version 9.1.0.115, including the Intel chipset identification utility.
http://www.rabayjr.com/vista/drivers/intel_wireless.rar
And for the Utilities you can download them from here:
1.Toshiba Configfree
http://www.rabayjr.com/vista/drivers/configFree.rar
2.Toshiba assist
http://www.rabayjr.com/vista/drivers/assist.rar
3.Raid utilities
http://www.rabayjr.com/vista/drivers/raidutil.rar
4.Remote control manager
http://www.rabayjr.com/vista/drivers/rcm.rar
5.Toshiba disk creator.
http://www.rabayjr.com/vista/drivers/disccreator.rar
6.Picture enhancement utilily.
http://www.rabayjr.com/vista/drivers/picenhan.rar
You can select your desired screen brightness and the monitor input settings:
monitor-in (rca normal or S-VHS plug in) when using your Qosmio as a monitor in for your VCR, DVD, Playstation, etc.
For using TV as monitor-in you also can switch from NTSC to PAL video system.
For screen brightness: This adjust affects the image of your DVD player software or when watching your DVD via media Center 2005
http://www.rabayjr.com/vista/qosmiopicenh.jpg
After installation this utility appears into the Toshiba Assist Window, on Optimize category as shown in the picture above.
As the Toshiba Media (Top) buttons are not working by now, you can use the HotKey (Fn+4) which is working 100% , to toggle from Normal screen input(4:3 aspect)
to wide screen input (16:9 aspect).
Press the Fn+4 once and your monitor video in is 4:3 mode, press again and the monitor video in is 16:9 mode, press once more and the image returns to your lcd normal. screen.
7. SRS Audio Sandbox utility (enhancement) for you soundmax audio experience
The sandbox will allow you to process any audio in your system with one of three SRS technologies:
WOW HD: Provides enhanced width, bass and definition for music sources.
TruSurround XT: Virtualizes multichannel content for listening on two speakers,
with post-processing enhancements.
CX Xtract: Provides enhanced multichannel virtualization by combining TruSurround XT
with Circle Surround II.
link to download:
http://www.rabayjr.com/vista/drivers/srs.rar
8.Toshiba value added package:
About the Toshiba Value added package for the G30, you can install it on the G20, but only some of the items, otherwise you will have conflicts with Windows mobility center.
Do not install the Toshiba energy control. Designed only for the G30 model.
It Maintains the Windows mobility center funcionality and the Toshiba Buttons (FN + F1, F2, F3, etc...)will be OK.
9.Toshiba extended Tiles for Windows mobility Center.
http://www.rabayjr.com/vista/drivers/tileswmc.rar
10.Microsoft photo info.
http://www.rabayjr.com/vista/drivers/photoinfo.rar
OBS: All the downloads are directly from my FTP server. 100% secure. No Virus. No spywares
Francisco

Palm 130 software needed for new windows vista

Similar Messages

Maybe you are looking for