Palm 505 data recovery

Hope somebody can help me!!  I have old palm 505 that has been working reasonably well.  Recently my laptop crashed, windows XP pro.  All the data from the hard drive was retrieved and new hard drive installed.  I can see the palm data files in the external hard drive where the recovered data is  but cannot get that in the palm desktop software to hotsync with my handheld.  Unfortunately data on the hand held was wiped out due to discharged battery.
thanks
Post relates to: Palm m505

If you data has been lost on both the Palm Desktop and the Palm E2 device there would be no way to recover this data unless you have created a backup of you user folder or exported it to another location.
Message Edited by Terabyte on 05-05-2009 01:51 PM

Similar Messages

  • Data recovery after hard drive crash.

    I've been using Palm Desktop Software 4.1.4 basically as a great Index Card app.  My hard drive died but I recovered my DAT files from backups.  On a new computer (Windows 7 x64) I reinstalled PDF 4.1.4 and added my .DAT files, but the software doesn't recognize them--nor will it allow me to use the User Names from the original installation.  I tried re-installation x3 with no success--I repeated the process with the 6xx version of PDF, again with no success.
    Is there any way I can retrieve my data and avoid having to re-type all of them?
    Thanks.  Haddox Sothoron
    Post relates to: HP TouchPad (WiFi)

    1.
    If you can boot, try using a linux liveCD  like systemrescue.  Use a flash drive to copy everything to the flash drive.
    2.
    If you can't boot, then you can try connecting the drive from another computer - not sure how that works, but it has
    been done before.
    Here's some links from my website,
    http://shengchieh.50webs.com/tuxslinks.html
    http://www.sysresccd.org/ (non-commercial; SystemRescueCd)
    http://www.mondorescue.org/ (non-commercial; Mondo)
    http://www.cgsecurity.org/wiki/TestDisk (non-commercial; TestDisk)
    http://www.cgsecurity.org/wiki/PhotoRec (non-commercial; PhotoRec)
    https://grc.com/ (commercial; SpinRite)
    These links are for linux systems, but some may be applicable for your machine.
    http://www.antrix.net/journal/techtalk/reiserfs_data_recovery_howto.html (ReiserFS)
    http://linuxshellaccount.blogspot.com/2008/08/recovering-deleted-files-by-inode.html (Recovering Deleted Files By Inode Number In Linux And Unix)
    http://www.linux.com/learn/tutorials/397719-repair-a-linux-file-system-and-reclaim-deleted-files (Reclaim Deleted Files and Repair Filesystems on Linux; 1/25/11)
    If you need more, do a search for "data recovery".
    Regardless, look at system rescue link first.  And ask questions in their forum if you still have questions after reading
    their docs, et.al.
    Sheng-Chieh

  • Data recovery after hard reset???

    My Z22 crashed and wouldn't respond to screen taps. Soft resets didn't help, so I had to do a hard reset. The device still does not work. Before I throw it away, does anyone know of a data recovery app that will recover my data? thanks, david
    Post relates to: Palm Z22

    Have you been doing regular HotSyncs as instructed by the documentation included with the device?  If so, just do another HotSync and your data will return!
    If not, then I'm afraid your data is lost.  
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Data Recovery from Partitioned and formatted Bit Locker Encrypted Drive

    Recently because of some issues in windows 7 installation from windows 8 installed OS. it was giving as the disc is dynamic windows can not be installed on it. so at last after struggling hard no other solution i partitioned and formatted my whole
    drive so all data gone included the drive which was encrypted by bit lockers.
    For recovery i used many software such as ontrack easy recover, get data back, recovery my files professional edition but still i couldnt able to recover my data from that drive. then i found some suggestion Using CMD to decrypt my data first 
    http://technet.microsoft.com/en-us/library/ee523219(WS.10).aspx
    where it shows it successfully decrypt my data at that moment my drives were in RAW format excluding on which windows is installed and then in CMD i check Chdsk which also shows no problem found. but now problem is still i coudnt able to recover
    my data then i format the drive D and again tried to recover data using above software after decryption still no result. 
    Now i need assistance how i can recover my encrypted drive as it was partitioned and also formatted but decrypted also as i have its recovery key too. thanks

    Hi ,
    I am afraid that we cannot get the data back if the drive has been formatted even if use the
    BitLocker Repair Tool.
    You’d better contact your local data recovery center to try to get data back.
    Tracy Cai
    TechNet Community Support

  • Time Machine Recovery (after data recovery)

    Several months ago, Disk2 and Disk3 in my 2007 MacPro 1,1 (OSX 10.7.5) became unreadable by the computer. To make matters worse, the Time Machine external backup became equally as unreadable. All at the same time! Drive 1, with the operating system, seems to be unaffected. The two unreadable drives showed up as "media" in disk utility, but didn't show up in Disk Warrior or any other similar programs (partition repairing) using the "terminal." I sent the Time Machine drive (WD Mybook Essential 3Tb) to DataRecovery.com and they found no phyical issues with the drive. There was, however,"Data Corruption in the file tables and data area" (according to the evaluation report). This was corrected and the TM drive was supposedly completely recovered.
    Upon receiving the external drive (now replaced by a newer 3Tb Mybook), I replaced disk2 and disk3 with new 1TB drives (formatted with a single partition) and tried to perform a restore for these two drives. No such luck.....The drive was readable by the computer but would not actually enter into "Time Machine." I examined the actual drive and found an inordinate amount of Unix executable files, especially when going into the individual backups. The drive does show that they recovered 870Gb of information, but nothing seems to be readable much less recoverable.
    I'm wondering if there is a workaround for any of this or whether I should contact the data recovery people to resolve this. I appreciate any help on this as it's become expensive and a bit deflating.......I still hold out some hope, though. Thanks. The drives were most likely corrupted by a generator that kicks on once a week (automatic maintenance) and temporarily cuts power long enough to turn the computer off...I've since gotten a UPS.

    A general look at backup files......

  • Using Bitlocker Data Recovery Agent (DRA) on Surface Pro 3

    We currently have the Data Recovery Agent (DRA) configured in our Bitlocker Policy for our Windows 7 Systems, and it works fine. In situations where the Recovery Key for the computer object was not backed up to AD correctly for whatever reason or the computer
    object was deleted, our HelpDesk can connect the encrypted drive to another system, and then use the certificate for the DRA to unlock the drive.
    I'm wondering if the BitLocker DRA Certificate unlock method will work for Surface Pro 3 devices, in the case that that their computer object and normal BitLocker recovery key is deleted or missing in AD for whatever reason. Seeing as how our helpdesk can't
    easily remove the internal HD from a Surface Pro 3 (I think only MS can do this?), I'm wondering if this BitLocker recovery option is still an option for Surface Pro 3's and if it is not then if there is another recommended option for Surface Pro 3's and/or
    other Windows 8.1 Tablets used in an enterprise environment.

    noctlos wrote:
    Using linux-3.18 and -3.19 kernels, with wayland/weston v. 1.7. In its own tty, i try to run weston, and I get the following stderr:
    Could anyone help me to figure this out? Thanks.
    Seems that the problem lies in libinput. Maybe you can report that upstream. I suggest you recompile libinput with debug info and do not strip the binaries to obtain better backtraces.
    Edit:
    I have also tried running `swc-launch -- velox`, and get the following error:
    Running on /dev/tty2
    velox: error while loading shared libraries: libinput.so.5: cannot open shared object file: No such file or directory
    Server exited with status 127
    Restoring VT to original state
    So, perhaps I am having some libinput trouble. Does this seem correct?
    Well, that's a different problem. libinput has several soname bumps because of API and ABI incompatibility. You have to rebuild swc against the newest libinput. (Although I'm not sure if swc developer updated the code to new API)
    Edit 2:
    Just to tack this on here for `gnome-session --session=gnome-wayland --debug`
    I'm not expert on this, it may be related to libinput problem. If you don't include GDK_BACKEND=wayland environment variable when launching gnome-wayland.
    Last edited by jdbrown (2015-03-01 08:04:39)

  • Macbook - Dead Hard Drive? Data Recovery?

    A friend has asked for my help - his Macbook (1st generation - about 4 years old) suddenly refuses to start but displays a grey screen, sometimes with a question mark. You can also (sometimes) hear a few clicks from the hard drive. I'm assuming the drive has died - is that most likely?
    The machine will not start in target disc mode (my laptop cannot see it and there's no firewire icon on the screen) but it will start quite happily from an install DVD, Disk Warrior DVD (DW could not see the internal drive at all) and an external firewire drive. Can it be anything other than the internal drive itself - any other tests I can try?
    Now, I have to whisper this bit - he has no backup! I'm comfortable with fitting a new drive for him but is there any way I can try to retrieve data other than a specialist company who are talking around £600.

    The only other thing I would try is physically removing the drive from the Macbook and, if you have one, installing it in an external FW enclosure, connecting it to a Mac using a raw SATA cable, or using a (preferably read-only) SATA drive dock.
    If that doesn't do the trick, I would say you've tried everything that a non-data recovery specialist should try, so at that point my professional advice for him would be to judge the value of what's on the drive, and, if appropriate, seek the help of the data specialists.
    Matt

  • Data recovery - HELP!

    Hi there
    I have done the stupidest thing EVER! I back up my entire MacBook on an external hard drive - so far, so sensible. Only I've updated what I've backed up by replacing folders with newer versions and I've only just realised. I've lost four years' worth of digital photos and I'm praying there's some way of recovering them. Please help me! I'll name my future children after you and put you in my will!
    Here's what I've done in full:
    - I upload all my photos to iPhoto, edit them and then save them into a folder within a folder on my desktop
    - I started getting very low on operating memory so I got an external hard drive with a fire wire and began backing everything up. I took all my photos in the Photos folder off my desktop altogether and trashed them, so I had more operating memory.
    - I did this in May/June
    - I also had photos from 2004/2005/2006 on there which were from before I had a Mac and uploaded to iPhoto
    - I've since overwritten this folder with a new (thus virtually empty with only a few recent photos) version and I think I've done it twice since I originally backed everything up, but I've only just realised I've been overwriting everything.
    - I've looked in that iPhoto library in Pictures that I have and I can recover some photos, but there appears to be a lot missing and because I'm a keen photographer who is anal about editing and organising (the irony!) my photos, they're all mixed up - which is why I had them in separate folders in the first place
    Is there ANYTHING I can do?
    Can they be recovered from the hard drive itself?
    Is there software that can be downloaded free or paid for to do this?
    I've googled it a bit and it looks like there's stuff you can download for a PC. I have access to a PC, so I can have a go on that if that's what it takes.
    If they can't be salvaged from the hard drive, will I perhaps be able to find them in a secret place on my MacBook from the time I trashed the original folders a couple of months ago? 'Secret place' is about as technical as I get!
    I can't get an appointment at the Genius Bar for a while. Any help on this would be much appreciated. I know I'm an idiot - but I was half way to being a non-idiot by backing up in the first place...so small victories...!
    Thanks,
    Rachael

    Basics of File Recovery
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.
    Since it sounds like you overwrote files and folders then the data that were overwritten are gone for good and can not be recovered.
    In the future you should make multiple backups including an archival backup on DVD media that can be stored away safely. It's good that you have some backups, but your backup plan is obviously inadequate.

  • Data recovery

    First off I want to apologize because I am not computer literate so I will try to explaine my problem and hope someone can help me. The motherboard died on an older Compac with Vista 32 bit. I have tried to connect the hard drive as a second drive in
    a newer Compac Windows 7 64 bit. I cannot get the system to give me access to this drive so I can transfer all my financial data off. I even tried to use the BlacX device to hook the drive up through the USB port. I can find the drive under Devices and printers
    and it says it is working properly and I can also see it under Disk Management (Drivers are up to date) but it will not create a drive letter so I can access it. How can I recover the data from the old Compac drive??

    Thank you for the articles. I am in practicality doing the opposite. I am trying to transfer data from a 2nd drive from an old computer to the primary drive on a newer computer. Am I to assume that I have a partition damage or missing if Disk Manager
    shows the disk space as "Unallocated"? It is a 160 GB hard drive but it shows 149.05 GB Unallocated.
    Hi,
    Contact the professional in Data recovery service would be better if the data is very important.
    Kate Li
    TechNet Community Support

  • Data Recovery On an iBook G3

    I had an iBook G3 in college (2002, exact model @ http://bit.ly/VGVpSh), and when it died I purchased a new Mac and shoved the iBook in a box (About 7 years ago). It died from the logic board/display issues that all those dual-USB iBooks had. I actually had one, or maybe even two, logic board(s) replaced under warranty, but it eventually went out again, and I just bought a whole new laptop. I know I have a ton of photos from college on there, and that's really the data I'm now after! I can get the screen to work most of the time by placing a clamp under the 'Option' key on the left half of the keyboard. New problem though, as fired it up to take a stab at finding my data; I'm getting a flashing question mark when it boots up, which a little research shows is indicative of hard drive failure... My photos!!! So I've messed around with the computer for an hour or so, and haven't had any luck.
    First and foremost, does the flashing question mark mean that data's dead and gone for good, period? Or could the drive itself be fine, but the controller/cables be bad? Sadly, ten years later I don't have the install CD, so that's not an option. I used a random OS9 disc I found online, but it wouldn't boot off that either; I'm guessing because it's not the original OS CD for this model... I also can't get the 'Firewire target' to work. The oldest computer I have in the house is an Intel 2ghz core duo 2 (exact machine @ http://bit.ly/LqDkzw) running 10.6. I'm guessing the new machine/OS won't do the Firewire target mode, as I've been unsuccessful when I've tried. I just read there are different Firewire 400 vs Firewire 800 cables, so I guess I could just be using the wrong cable as well..? I found an old Firewire cable to even try this in the first place, but I have no idea if it's 400 vs 800. Or would a bad hard drive preclude the Firewire target mode anyway?
    I've also tried random things like Ethernet connections, but no luck. I'm guessing the probably-wide OS gap won't allow them to communicate anyway.
    I found a bunch of these laptops on ebay for $45, So I guess I could just buy one used, and swap the hard drives? That way, if the HD it self’s ok, moving it to a new home might help (plus it'd fix the logic board issue). Downside is that the hard drive swap doesn't look easy at all, and I could end up messing up the HD even more.
    I've never used a data recovery business, but is that possibly my best bet? I have no idea how much they cost, but I think a friend said his data recovery cost like $250. In all honestly I think I'd pay $250 for my old memories, I'm just not sure where to go from here. If anyone has suggestions on fixing it, or ANY suggestions on who’s a good merchant to handle this, I'd greatly appreciate any advice. Thanks all!

    I use the external caddy as edex67 has suggested you try. This is probably the cheapest and easiest way to recover the pics providing that the hard drive is working. The only catch is you must remove the drive in order to attach to the adapter. Since you are not trying to resurect the iBook, the drive removal would be easier as disassembly would not have to be as cautious. Below links to disassembly and a source for an adapter.
    http://www.ifixit.com/Device/iBook_G3_12%22
    http://eshop.macsales.com/item/NewerTech/U3NVSPATA/

  • Data Recovery - External Hard Drive

    Hi,
    I have recently copied over a folder on my iOmega (Prestige Portable) External Hard Drive with a folder from my Power Book Hard Drive, with the replace all.
    What I need to know is there a way to step back to the point before I copied over this folder?
    Ok so here comes the Dumb bit, I have never set up Time Machine! Yes I know, very stupid!
    So I'm now in the process of seeing if it is possible to step back with data recovery software and if this is possible what do people reccomend! I have tried SanDisk RescuePro but It comes up with a message saying that the drive is too big, I think it is meant for Flash Drives!
    Have I posted this in the right Discussion thread? If not were do you think I would be best to post this?
    Thanks

    Johno11111 wrote:
    Ok so here comes the Dumb bit, I have never set up Time Machine! Yes I know, very stupid!
    Us mere mortals do tend to learn things the hard way, don't we?
    So I'm now in the process of seeing if it is possible to step back with data recovery software and if this is possible what do people reccomend!
    FIrst, stop using the drive immediately. If the files haven't been overwritten already, the more you use it, the more likely that is.
    There are several Data Recovery apps for Macs; +Data Rescue II+ seems to be the one mentioned here most often, but others get good reviews, too. I've not used any, so can't say one is better than another.
    I understand you'll need another external disk to receive the recovered files. (But you'll probably need one anyway for Time Machine or other backup app that you'll be using regularly from now on, right? You can use a second internal HD, Time Capsule, or in some cases back-up over your network.)
    I also understand that some of these apps have a trial version that will tell you whether there's anything to be recovered, and perhaps recover a single file, so you don't spend the $$ for nothing.
    Look for +Data Recovery+ via Google, VersionTracker.com or MacUpdate.com. The last two have user reviews. Just be certain whatever you use is compatible with Leopard.
    And/or, search for +Data Recovery+ in the Using Leopard forum.
    Once this is sorted out (or to explore Time Machine options), you might want to review these:
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine
    and perhaps browse the Time Machine - Frequently Asked Questions *User Tip* at the top of this forum.

  • Formatted external hard drive from PC to Mac - Data Recovery Needed

    I formatted an external hard drive configured to (PC) for a Mac.
    I clicked erase data by accident during the process of formatting --  My old files are no longer there now.
    Is there a way to recover the old files that I had on there before the reformat?
    Someone please say yes and tell me it's possible......

    Not very likely.
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Data recovery from external hard drive

    I'm sick! I was attempting to format my flash drive and I accidentally chose the wrong drive and formatted my Toshiba 3.0 external USB hard drive with over 350GB of data on it. Is there any way at all to recover my files?

    Lots of programs out there from which to choose. In the meantime, don't access the drive.
       18 Free Data Recovery Software Tools
    -Jerry

  • Data Recovery After Hard Drive Failure!

    Ok, basically, I've got a 2 1/2 year old iBook G4 with a bombed hard drive, and unfortunately, the last time I backed up was around 3 months ago. Here's what happened right before the crash: some applications like Widgets and Safari were acting fluky, and it wouldn't let me open Word documents, so I restarted, because I thought it might have something to do with the fact that i had downloaded the new version of itunes not that long ago and hadn't restarted since. well, when i restarted, the gray screen with the wheel and the apple symbol went on for a really long time, and then the blue screen came up with the cursor, but nothing else happened, and the blue screen just stayed there. as far as i know, the hard drive wasn't making any unusual noises, just the usual occasional soft sounds that my hard drive has always made (there are usual sounds, right?) a piece of information that might be useful is that the hard drive was almost full (it only had about 5 GB left, which i understand is how much you should leave) could this have caused the failure maybe? anyway, i tried using the hard drive as a target and tried getting another computer to recognize it and pull the files off, but that didn't work. so, i brought it into the apple store, and they got it to boot up but using some external hard drive, i think. they tried disk utility, but that didn't see my hard drive. then the tried disk warrior, and that saw it and repaired it or something, but then it couldn't get the drive to mount. so, i'm assuming that because disk warrior didn't work and couldn't get it to mount, then other software like data rescue, etc... won't either. like all computer users, i've got some REALLY REALLY important data on there, and all the data recovery places i've gotten quotes from are pretty pricey. if the drive doesn't require physical data recovery, only non-physical, as i hope, the cheapest is still $350. even so, the person on the phone there didn't seem to know nearly as much as the people at the more pricier places. so, are there any other options besides expensive data recovery? i read something about using dd - a unix thing, but i don't know the first thing about it (http://www.macosxhints.com/article.php?story=20050302225659382) so i'm not sure i want to risk messing it up even more. and, if worse comes to worst, then i'll use a data recovery place... but can anyone tell me if they've used any of the data recovery companies below, and which ones are good?
    (first three do evaluation for free, and then you decide if you want to continue based on more accurate price idea)
    MacintoshDataRecovery.com
    $500 non physical
    $1100-1600 physical
    Heroic Efforts
    http://www.heroicdata.com/data_recovery
    $350 non physical
    ships to another (very expensive) place if physical
    ACS Data Recovery
    http://www.acsdata.com/index.htm
    $600-700 non physical
    DriveSavers.com
    (recommended by Apple, probably the best, but the most steep, too)
    could cost anywhere from $500-$2700 and $200 evaluation fee even if data is unrecoverable
    Since this is our fourth hard drive failure in four different iBooks in 2 1/2 years, i am starting to become seriously disillusioned about the quality of the hardware Apple uses...not that i would ever get a dell or anything, but still....
    THANK YOU in advance for any tips you might be able to offer, and also for reading this extremely long post!
    katie
    iBook G4   Mac OS X (10.4.3)  
    iBook G4   Mac OS X (10.4.3)  

    I have read good reports concerning Data Rescue although I have not used it myself.
    Once you get your data back, focus on a regular (even daily) backup routine, because as you know only so well, the question is not if a drive will fail, it's when.
    My condolences, by the way.

  • How to copy Palm Desktop data to a PC using Windows 8.1

    If like me you still find the Palm Desktop data (address, calendar, memos, etc.) handy and use it long after throwing away the handset and "sync" ability, you may find this useful.  I bought a new PC using Windows 8.1 and had problems transferring data because of a wrinkle that I figured out, which didn't exist in Windows XP, Vista or 7 versions.  Here's a recap of one way to easily transfer data from those earlier versions if you have a USB flash drive (or Dropbox, Google Drive, whatever) handy :
    1) Download Palm Desktop 6.2 or 6.2.2 to your new PC.  Then give a user name exactly as it exists in your old PC's database.  This name will be used by Desktop software to create a six letter folder name (an abbreviated version of your name) to hold data that Palm Desktop will look up.  Wait a few seconds for this to happen, then close the Desktop application on your new PC.
    2) In your old PC from where you want to transfer data, look for the folder called "Palm OS Desktop" which should exist in "Documents" under "Users" folder and subfolders path like >your name subfolder>Documents in Windows 7 (may be Vista too) or may be under "Documents and Setting" folder in Windows XP. 
    3) In this folder "Palm OS Desktop" look for that six letter subfolder of your name, and select that entire subfolder and choose "Copy" or Ctrl-C
    4) Locate the same subfolder name in your new PC (which will have null data), delete it, and then "paste" the subfolder you "copied" into the same exact location.  If you've done it right, Viola!  Your new PC desktop should show all the transferred data once you again open the application.
    Most of the same procedure works with Windows 8.1 (probably also Windows 8) PCs.  What I found different was that the data subfolder created under "Palm OS Desktop} had 7 instead of 6 characters with a "0" (zero) added as the last character.  So when you finally copy and paste that subfolder into the new PC you have to rename it and add that "0" for the Palm Desktop to locate this data.
    Hope this helps.
    This question was solved.
    View Solution.

    To turn off UAC, go to the Control Panel, then User Accounts.
    Under the header, "Make changes to your user account", there is an entry titled "Change User Account Control Settings".
    Pick it, and drag the slider all the way down to "Never Notify".
    Access of Japan is the company Palm hired to write Palm Desktop 6.2.2.  
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for