Palm Centro providers?

I'd like to keep using a Palm Centro, which I now have through Verizon Wireless.  My current Centro is now partially disabled with a cracked screen.  I have anther Centro handset, but Verizon says it can only activate a Verizon-branded Centro - and they don't sell them anymore.  Ouch!  Does anyone know any other wireless service provider who still offers the Centro?
Post relates to: Tungsten T

Did these keys ever work?
Have you installed anything lately that corresponds with the timing of the errors?
Since the device is still covered under warranty, I'd take it back to whomever you purchased it through, either Sprint or Palm.  
Note:  Both of them might ask you to Hard Reset the phone to determine whether the problem is caused by software.  Have you tried this yet?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Can not get e-mail messages to go out on my Palm Centro

    I have a Palm Centro and have tried to set up my e-mail accounts.  I can not get either e-mail options to send the e-mails out (I can get incoming messages however).  I have entered the correct information required by my provider (I am with Mediacom).  Any ideas on what the problem might be or what I can do to fix it? Thanks. 
    Post relates to: Centro (Sprint)

    This happens with a lot of providers, who block remote access to their outgoing servers as a means of preventing spam.
    Try using Sprint's outgoing mail server.   Go to the Palm Knowledgebase and enter 39211 in the Solution ID box for the server information.
    Message Edited by smkranz on 12-10-2008 08:06 AM
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Palm Centro Issue With Yahoo Mail Plus POP via Versamail

    I have a Palm Centro and have been using Versamail for 3 1/2 years with my Yahoo Mail Plus account via POP. On September 12th I stopped having the ability to send or receive POP email on my Yahoo Mail Plus account. I have spoken with Sprint & Yahoo. I have done all the steps they have asked and I have even gone as far as replacing my phone with another Palm Centro and still have the same issue. I know the config is correct as it was working for so long. I can use my Gmail POP in Versamail fine. I receive the error when setting up the Yahoo Mail Plus account in Versamail when I click on "Test Settings" I receive the following... "Error connecting to server. Please check your network or server settings and re-sync." Does anyone have any ideas about this? Thanks.
    Post relates to: Centro (Sprint)

    actually some e-mail providers like yahoo free account, msn mail and free hot mail does not work with the mail application, as you told me that it needs to enable the pop server for such mail
    and about the iphone are you sure that ur using the mail application in iphone, you must be using safari to browse through ur mails
    yahoo mail plus is compatible with the mail application but it comes for a price so here you could either use safari to go through your mail or go in for some other free account like AOL which will work with the mail application

  • How to charge your Palm Centro via 64-bit Windows, with a USB cable

    Here is a way to recharge your Palm Centro on your 64-bit Windows computer, through a USB cable.  But first, a few brief explanatory notes...
    Note 1:  I have successfully used this method to charge my Palm Centro from my 64-bit Windows 7 computer.  This method probably works for other Palm devices and other 64-bit Windows versions (XP and Vist)...  but I haven't tested this on any other configurations.  Others may feel free to post their successes or failures with their setups.
    Note 2:  This method will NOT allow you to HotSync your Palm to the computer via USB.  All it does is let you charge your Palm via USB.  If you need to HotSync your Palm, and you have 64-bit Windows, you have to use Bluetooth or some other method.  To learn how to use Bluetooth to sync, search for "bluetooth sync 64-bit" or something like that on this forum.
    Note 3:  If you're wondering why someone would need to use this method - why not just plug the phone into a wall outlet, right? - it's because the Centro's charging jack can get messed up.  Mine has not worked properly for the last several months
    Note 4:  I will not be posting any follow-ups to this message.  This is my first (and only) post here...  I'm posting here because I am very grateful to this forum: It is here that I learned how (and why) to sync my Centro to my computer via Bluetooth, because Palm doesn't support 64-bit Windows. This is my way of saying "thank you"!  I'm not trying to be harsh by not following up...  it's just that I won't be checking this thread, and I don't want anyone to have bad feelings if they ask questions and I don't respond.  I'll be as thorough as I can in this one posting, though. 
    Note 5:  I cannot claim credit for actually discovering this solution.  I found it after HOURS of looking online... it was on some obscure website.  Unfortunately, I can't remember where I found the original solution, so I can't credit the discoverer here.  However, I have done my best to provide much more detailed instructions here.
    Note 6:  Lastly, Palm should support 64-bit Windows.  Period.  Some of you may say, "It's not Palm's fault - the company that makes the Palm OS is Access, and it's Access's fault for not supporting 64-bit Windows."  Well, this may be true, but Access has stated that Palm has not requested a 64-bit driver.  (In fact, you can call Access and ask them directly.)  And if Palm doesn't ask (and pay) for it, Access sure isn't going to create one on its own.  I used to LOVE Palm devices...  I've used Palms for 12 years now, and for most of that time, I heartily recommended Palms to all my friends.  But, between this problem and the other problems I've had with my current Centro and my previous Treo, I'm done with Palm.  No more for me.
    OK, here's how to charge your Palm (finally!)
    1)  If you haven't done so already, install the latest version of Palm Desktop / HotSync on your computer.  You can get this at palm.com, under the "support" section.  (Actually, I'm not sure if this is necessary, but I already had done this.)
    2)  As you're installing the software on your computer, toward the end of the process, do not actually sync your Palm to your computer.  Just cancel or whatever you have to do to avoid that step.  (Remember, the whole point here is that Palm does not have a driver compatible with 64-bit Windows, so you won't be able to sync via USB.)
    3)  If you don't already have it, get the PocketTunes application (also known as "pTunes") on your Palm device.  If you have to install the software, you may need to do so wirelessly or via a 32-bit Windows computer (because, again, Palm doesn't support 64-bit Windows).
    4)  Connect the Palm USB cable to your computer.  If you are using a desktop, plug into the USB ports on the BACK of your computer.  These ports are directly powered, whereas the ports on the front of your desktop may not be.  You'll want as much juice as possible to charge your Palm.
    5)  Connect the Palm USB cable to your Palm.
    6)  Turn on the Palm device, and open the PocketTunes application on your Palm.
    7)  PocketTunes will try to connect to Windows Media Player (on your desktop).  Tell your desktop to connect to Windows Media Player.  (You can save time by telling your desktop to do this automatically.)  When PocketTunes connects with Windows Media Player, you'll have a power connection via USB.
    8)  PocketTunes will eventually show that it is "Idle" on the Palm.
    9)  To confirm whether the Palm is charging, look for the charging light (on the Centro, it's on the upper left) to turn solid red.  You can also hit the home button on the Palm to see the battery / charging status.  To get the charging working, you may have to exit PocketTunes and come back into it a few times before the charging light comes on.  I have no idea why you have to do this; I just know what I wind up doing sometimes.  You don't have to unplug and replug the phone from the USB cable, or turn the phone off and on.  Just leave PocketTunes and come back to PocketTunes.
    10)  If you exit the PocketTunes application on the Palm, the Palm will still charge - but you'll get the constant and annoying "no driver" noise from Windows.  To avoid that sound, just keep the Palm on PocketTunes while you have the Palm plugged into the USB cable.
    11)  You can close Windows Media Player on the desktop once you have the Palm charging.
    12)  Once you have this set up properly, you can speed up the process by setting the HotSync cable button to PocketTunes - after all, that button no longer needs to be set up to HotSync via USB cable.
    When you have everything set up, here's what you would be doing on a regular basis:
    -- Plug USB cable (which is already plugged into your computer) into Palm
    -- Hit HotSync button on cable --> This starts PocketTunes --> PocketTunes automatically opens Windows Media Player on the computer
    -- See if charging light turns solid red --> If not, exit PocketTunes, then hit HotSync button on cable to start PocketTunes again
    -- Repeat until charging light turns solid red (success!)
    -- Once the Palm is charging, close Windows Media Player on desktop
    Best of luck to all who need this!
    Post relates to: Centro (Verizon)

    Why do you want to create your own driver instead of what comes with the device? If you go that route, you need all of the low level USB RAW protocol from the vendor. Did you get that? Yoe are wasting your time if you don't have that. Is the driver from the vendor documented? If it's a USB connection, how does that connection show up in windows device manager?

  • Windows Vista won't install device driver for Palm Centro

    My Windows Vista PC can't seem to find the device driver info to install my new Palm Centro.  I've downloaded the latest version of Palm software.  Any ideas?  Thanks!
    Post relates to: Centro (AT&T)
    This question was solved.
    View Solution.

    ch96hh wrote:
    I am having the same problem - my computer can't find the device driver (Windows Vista) but I DO have bluetooth installed and visible.  Can you help?!  I am really not very good with technical things, but I've done a tone of research and haven't been able to solve the problem.
    Thanks in advance!
    Post relates to: Centro (AT&T)
    Read through the several large threads at the top of this section concerning syncing with Vista64...
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Palm Centro / Windows Vista 64bit

    Has anyone figured out how to sync music to a Palm Centro using Windows Vista 64bit?  My understanding is that there is not a USB driver for Vista 64.  I can already HotSync my Centro using Bluetooth, that works (albeit slow) but can't sync music and as anyone with a Centro knows, removing the memory cards is inconvenient.
    Post relates to: Centro (Verizon)
    This question was solved.
    View Solution.

    Even if there was a way to sync music files to your Centro from a Vista desktop, music files tend to be large and take a long time to sync.  The best way to put music files onto your card with any operating system is by dragging & dropping onto the /audio folder on your card with a card reader.  Removal of the micro SD card from the Centro isn't all *that* inconvenient.  Not like you need to do it very often.
    Post relates to: Centro (AT&T)
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Can't sync Palm Centro and Outlook 2007/Windows 7 - please help!

    Hello,
    I've never posted on a forum, but I'm at my wits end...!  I've been trying to get my Palm Centro to sync Contacts/Calendar/Memos to Outlook 2007 on my new laptop for a week now with no success.  It used to sync just fine to my old computer with Windows XP and Outlook 2003.  Then that computer crashed (my Outlook files were backed up on an external harddrive).  I received my new computer with Windows 7 XP (32-bit) and Outlook 2007.  I've downloaded the Palm Desktop 6.2, Windows 2007 Conduit, and Software Update 1.03 (Windows installer) for Centro for Verizon. 
    When I sync my phone to my new Outlook, it completes all 12 steps, but does not load Contacts/Calendar/Memos to Outlook.  This is a list of the error messages:
       HotSync session started on 04/14/10 12:11:25, and completed in 100.0 seconds
     Outlook Calendar synchronization completed with messages
     Duration: 5.4 seconds
     Outlook Calendar
     Please set the option "Enable Synchronization when Outlook is offline" in UI inorder to synchronize in Offline mode
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Outlook Contacts synchronized successfully
     Duration: 0.0 seconds
     Outlook Contacts
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Outlook Tasks synchronized successfully
     Duration: 0.0 seconds
     Outlook Tasks
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Outlook Notes synchronized successfully
     Duration: 0.0 seconds
     Outlook Notes
     OLERR:0C-000F (0x0)
     OLERR:0D-0003
     OLERR:0D-0001
     - Not Synchronized
     Media synchronized successfully Duration: 3.8 seconds
     Backed up some files successfully to Backup Folder 
     Duration: 90.0 seconds
     Backed up 9 file(s) successfully
     AddressingLibRecent-HsCh
     AddressingLibRecent-HsCi
     Messages Database
     PhoneCallDB
     Cookie Data
     AddressCompaniesDB
     psysLaunchDB
     Saved Preferences
     AddressTitlesDB
     Failed to backup 1 file(s) PmTraceDatabase Protocol Error: Handheld file could not be opened. (4004) SYNCERR_FILE_NOT_OPEN
    Can someone please help me transfer Contacts/Calendar/Memos from my Palm Centro to my computer's Outlook 2007?
    I've ready about 3rd party software in posts (Pocket Mirror), but I don't know if it applies here because the Contact/Calendar/Memo information is in my Centro - not in Outlook.  I need to get it from my Centro to Outlook 2007. 
    Any help is greatly appreciated!  Thank you!

    hat wrote:
    I have a Pre Plus and am using CompanionLink software.  If the Centro is like the Plus (which I believe it is) it will not sync with Outlook.  Here is a link to Companion Link:
    http://www.companionlink.com/index.html
    I have been using this and it works great.  On their site you can choose the phone and the particular program you need to sync with and choose which you way you want to sync.
    Hope this helps
    Sorry hat, the Centro has absolutely nothing in common with a webOS device!  It runs PalmOS.  Nice of you to reply with your suggestion though! 
    @SyncHelpPlease:  OLERR errors are covered in this Palm KB article:
    http://kb.palm.com/wps/portal/kb/common/article/31167_en.html
    Something I noticed in your post - you installed Palm 6.2.2 AND the 2007 conduit.  Palm Desktop 6.2.2. has the 2007 conduits built into it already, and the patch is not needed.  Whether this is the cause of your problems, I'm not sure, but I've fielded several posts of the same issue where the user did the same thing you did!
    I'd suggest doing a clean uninstall, and reinstall of Palm Desktop 6.2.2 only. 
    I admit, I do not use Outlook, nor Win7, so I'm giving you my best guess at a way to solve your problem.  Hopefully, this may lead to a solution! 
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Palm Centro - Vista - Hot Sync Problem

    Hello:  I have a Palm Centro (Verizon) and am having major issues hot synching to my new Windows Vista (32 bit) home PC.  I continually get the following error message:
    "Error: SgConflictNotifier.dll failed a confirmation query and cancelled the sync operation."
    "HotSync Error: An application canceled synchronization or failed to respond to a HotSync notification.  Please ensure that you are not currently editing data using applications such as Palm OS Desktop or Install Tool (8009)."
    I am running Hot Sync Manager 7.0.2 and Palm desktop by ACCESS 6.2.2.
    When I tried the Hot Sync operation on my old XP computer, no issues whatsoever.   Can anyone help?
    Thanks
    Seca2man
    Post relates to: Centro (Verizon)

    I am having the same issue as are several people on this board. I have attempted to reinstall the application and reset my Treo but still nothing. I would be interested if there is a fix I am missing.

  • Need a method for importing Palm III data into a Palm Centro

    I just bought a Palm Centro (Verizon), with the expectation of importing data from my old Palm III.  From the Palm III Desktop, I exported Contacts, Calendar, Tasks, and Memos into separate folders (this was done on a Windows XP PC) and copied the resulting folders & files onto a flash drive.  But when I try to import these files into the Palm Centro desktop (on a new Mac Pro with OSX), the backup files are not in a "recognized format."  Does anyone have a process for reliably getting the Palm III data into the Palm Centro?  Also, is there an easy way to purge unwanted Contacts/Calendar events from the Palm Centro handheld?  With all the trial and error, its accumulating a lot of garbage.  Thanks...
    Post relates to: Centro (Verizon)

    Click on the following link for the upgrade guide on kb.palm.com
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=12926
    You will need to hard reset the Centro in order to clear out the Centro before sync'ing. Click on the following link for the hard reset procedure.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
    Click on the following link for the support page for your devices on the kb.palm.com webpage.
    http://www.palm.com/us/support/centro/centro_vzw/
    http://www.palm.com/us/support/palm3/
    There are links on the pages to the user guide, troubleshooting, how to's, downloads, etc.
    You could try to export the data in each category in Palm desktop, save to the flash drive and import the data.
    Click here for the data export procedure.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=36288
    Make sure you select "ALL" for the range during the export procedure. If you don't, it will only export the currently selected record.
    Post relates to: Palm i705

  • How to set "from" field in Versamail 4.0.1 EAS / Palm Centro Verizon

    I have set up a Palm Centro to sync via Activesync using Versamail 4.01.00. All seems to be working normally but there doesn't seem to be a place to set the senders proper first and last name as the sender. When I send an outbound message the recipient receives the message from login "username" instead of "Firstname Lastname". Anyone know where to change this?
    Thanks,
    Rob
    Post relates to: Centro (Verizon)

    Check under Preferences / Reply Options
    Post relates to: Treo 700p (Verizon)

  • Setting up Bluetooth HotSync - Palm Centro, Windows 7, 64 bit

    A couple of days ago I posted on here trying to figure out how to HotSync my Palm Centro with my new computer that has Windows 7 (64 bit).  I followed the instructions - had to go and buy a Bluetooth Adapter for the computer - and went through the instructions from the sticky that was pointed out to me in my original question.  I'm to the point where I'm trying to set up the phone to do a Bluetooth HotSync but when it's searching for computers it doesn't find any...
    HELP!!!!! What do I need to do now.  It may take me a couple of days to get back if anyone answers this quickly because I have a very hectic weekend but any and all advice is appreciated.  Thanks.

    Thanks for sharing your solution andygc! 
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Only Able to Wirelessly Sync Palm Centro One-Time Before Needing to Reboot My PC to Sync Again

    I'm using a Bluetooth dongle to sync between a Palm Centro and my PC, which uses the Windows Vista 64-bit and Outlook 2007. After an unbelievable four hours on the phone with Palm support, I was able to synchronize wirelessly because that was the only option available.
    All synchronizations have been problem free for at least four months and then for reasons that escape me, I can only successfully sync once, without having to reboot my PC. It seems that each reboot is good for one sync. When I try to sync more than once, I get the following error message on my Centro:
    "Unable to initiate hot sync operation because the port is in use by another application."
    I am probably going to be upgrading to Windows 7 over the next month or two and am a bit concerned with the problems I've seen from people who've gone from Vista to Windows 7, who did not have any problems under Vista. The only reason I mention this is because of whatever solution that is suggested, hopefully it will also work under Windows 7.
    It is great to have a community that helps with Palm. Thank you very much.
    Post relates to: Centro (Verizon)

    The Bluetooth work around as worked for most customers and does not for some. This is for both Vista 64 and Windows 7 64. With your case it sounds like the Bluetooth partnership needs to be renewed. To do that delete both partnerships from the device and then re-add them. If you need more information on this please look at this thread: http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=53678

  • Palm Centro Carriername display

    Hi I'm new and this is my first post.
    In March I baught a Centro from England to use in Sweden with the carrier Comviq / Tele 2.
    I noticed emedietly two problems one minor and one for me vital  error.
    I reported the problem to Palm Support in Ireland and after over 50 mail trying to explain and even trying to help them correcting the problem I only got
    replys like have you resetted the phone have you installed any program, you sertanly recognise the totaly ignoranse for take the problem seriously.
    I got so upset so I reported the malfunctioning phone to VISA as a fraud and thankfully they have now refunded the hole amount for the purchase of the PALM Centro.
    And I didn't even had to send the phone back. So I experimented with it  and  solved  the problem to get  SMS-Reciept to work and found a solution that I have posted
    at TreoCentral and others have confirmed the patch to work.
    The other problem with the Carrier Name Display in the phoneapp is more of an cosmetic thing and I haven't looked into it so deep because it's only cosmetic.
    But I got some PM from people asking me if i have found a solution, and  I promised to look into it.  But I need some basic  information.
    So what I need to know is where the Phone  Application reads this information carriername, is it from the SIM Card or is it from any database file like CarrierProfiles2.pdb or NetworkProfiles.pdb that is extracted from CarrierCustomisation.prc in ROM.
    Any help appreciated because PALM seems not to care and it would be fun to solve before Palm is vanished.
    Post relates to: Palm V

    Well congrats on solving the issue for yourself. 
    One thing, should you really be confessing to fraud on an open message board. 
    Post relates to: None

  • How to connect internet in PALM Centro

    No device
    i have one palm centro,,,
    i m citizen of india,,
    i am unable to configure the internet settings on PALM Centro,,,,can any one please help me on this issue,,,kindly tell me the total settings,,,step by step,,
    one more thing,,, Is it compulsry to unlock the PALM before i can use internet,,,,, and if yes,,,, then how to unlock the device,,,,please,,,, u can even directly mail me on,,, [email protected]
    thnks in advance,,

    You need Wi-Fi or cellular data to connect to the Internet.
    Example using Safari address bar type URL below: 
    http://www.apple.com

  • Calendar or PIM Sofltware Suggestions Migrating from Lotus Organizer Palm Centro Unblocked

    Any suggestions for Calendar and PIM software for migrating from Lotus Organizer?
    Lotus Organizer 6.1 does not support Palm Centro. Palm Desktop is a shell of a program instead. I need a real PIM that I can use.
    And no Outlook isn't much better. I've now experimented with both Palm Desktop and Outlook.
    Key is that they must work with Centro.
    Paul 
    Vista, Palm Centro Unblocked
    Post relates to: Centro (AT&T)

    The only app that I know of is called Intellisync (which is now owned by Nokia I think. There's been a lot of company buyouts). This software will let you sync your Palm to just about anything (Outlook, Louts Notes, Novell GroupWise, etc).
    Head on over to their website at: http://www.sync.com/
    Although, I'd hurry. Looks like they're going to stop selling it in a couple weeks.
    Post relates to: None

Maybe you are looking for

  • File to File scenario using NFS.

    Hi All, I am learning XI and got stick in a relatively simple issue. I am creating a scenario wherein a file from a directory on local machine say (D:/xi_input) is transferred to a directory on local machine only (say D:/xi_output). I guess this scen

  • Safari 2.0.3 & Acid Search - It still works - FYI

    Just thought I would let fellow Acid Search Users know that Acid Search does still work with the latest Safari... You need to get rid of the Acid Search Package when installing the latest update (or it crashes Safari), but once the update is up and r

  • Quick time 7 pro download??

    I purchased Quick time 7 pro twice already now I had to have my computer repaired do i have to buy it a third time? I have the key just can't find where to download it, help please

  • Business Partner Reference No to be printed in outstanding statement

    Dear All, I need to get the Business Partner reference no. Column printed on the One page per Busines Partner PLD in Outstanding statement (Ageing report). I have tried to put reference but it only prints the first row details in all the subsequent r

  • Custom Infotype - to display the description  in query ouput!!

    I have created a Custom Infotype  and when I run a Infoset Query against the custom infoset, the field is getting displayed but not the description. For Ex ADP Infotype Company Code A11 - America                        Company Code A12 - Africa