Palm Desktop 6.2 with drivers and hot sync will not install

My new computer has dual quad core processors (8 processors), 8 GB RAM, Vista Ultimate 64 bit. 
The Palm Desktop and Hot Sync manager will not load because the New Hardware Wizard cannot find the drivers for the Palm Centro even when I point the wizard to C:/Program Files (X86)/Palm/USB-drivers.
Is the Palm Desktop software compatible with Vista Ultimate 64 bit?
The software loads just fine and operates well on my quad core,2GB RAM, Vista Home Premium 32 bit.
Post relates to: Centro (Sprint)

rsmilski wrote:
I have a Core 2 Duo CPU - I have a dual core, no?  I keep running into failed installs of HotSync. 
Is there a way of installing Hotsync using Bluetooth?
Thanks
Post relates to 700p (Bell)
Post relates to: Palm m125
Please see Palm's instructions for syncing via Bluetooth.  This article is for a Centro, but should be similar to your 700p.
http://kb.palm.com/SRVS/nua/launchKB.asp?c=49229
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Amd suitchable graphics with hd6670 (and intell 3000 ) will not work on windows 10

    hi there i have amd suitchable graphics with intell , and the amd will not work on windows 10 pro x64 the actual model of the amd is HD 6670 but is using the drivers of the hd6470. in any case it will not work in windows 10 pro x64 after a clean install. please any help thanks

    Have you disabled the firewall in you security system?  Windows firewall rarely gets in the way, but security systems' do.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1.  Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

    Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1).  I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly.  Do you want iTunes to try to repair this for you?  I normally respond with OK and it immediately tells me "could not be repaired.  Please reinstall iTunes..."  I have done this a number of times to no avail.

    I also notice Quicktime is not getting installed at all.
    That one is normal nowadays (ever since the iTunes versions 10.5.x).
    The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Error message: "the software required for communicating with Ipods and mobile phones was not installed correctly....

    2 error messages when opening itunes: "The software required for communicating with Ipods and mobile phones was not installed correctly.  Do you want Itunes to repair this for you?"  When clicking yes another message indicates not able to remove services.  Another message is: "Service (ipod service) could not be installed.  Verify that you have sufficient privileges to install system sources."  I've uninstalled all Apple services (itunes, quicktime, apple software update, apple mobiles devices support, bonjour and apple application support and reinstalled itunes/quicktime - no change in error messages.  I cannot burn CDs using Itunes.  This all seemed to happen when I updated itunes to version 10.  I have a Windows 7 64-bit operating system on a Dell Inspiron Zino HD; the Itunes software is also 64 bit.

    See the second box of  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • When I click on itunes, it tells me that thesoftware required for communicating with ipods and mobil phones was not installed properly. I have not changed anything on my computer so I'm not sure what I should do? Help

    Help, When I click on itunes on my computer it tells me that the software required for communicating with ipods and mobil phone was not installed properly. I havent' changed anything. Does anyone know what I should do? Thanks

    See the second box of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HT1386 I unplugged my iphone while it was syncing with itunes and now it will not sync new music that I have added to itunes? How can i fix it?

    I unplugged my iphone while it was syncing with itunes and now it will not sync new music that I have added to itunes?

    iPhone User Guide
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • The software required for communicating with ipod and mobile phones was not installed correctly

    ok i've seen this in several threads and haven't found one with an anwser. the software required for communicating with ipod and mobile phones was not installed correctly. of course when you tell it to repair it does not. this has happened several times now and only cure i have found is uninstalling itunes and reinstalling. works for maybe a few weeks then does the same thing and i start all over again with uninstall and reinstall. i tunes version 10.4.1.10  64 bit running on windows 7 64 bit and trying to sync with Iphone 3gs - so anyone have a fix for this or am i stuck reinstalling itunes every few weeks???

    "The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternative path to a folder containing the installation package "iTunes64msi"
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install.  Please help

    I was able to get the program to install last weekend but I had to do a refresh on my computer and THe program will not install.  Please help

    Please read, and reply here with more information https://forums.adobe.com/thread/1499014

  • I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

    Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
    Final Cut Studio 2 (Including Final Cut Pro 6)
    • A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    • 1GB of RAM
    • An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    • A display with 1024-by-768 resolution or higher
    • Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
    • QuickTime 7.1.6 or later
    Additional Recommendations
    • 2GB of RAM when working with compressed HD and uncompressed SD sources
    • 4GB of RAM when working with uncompressed HD sources
    • A display with 1280 x 1024 resolution or higher
    Additional Requirements for Motion
    • A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
    • A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
    • For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
    Additional Requirements for Color
    • The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
    • ATI Mobility Radeon X1600
    • ATI Radeon X1600
    • NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
    • For 32-bit rendering: a graphics card with at least 256MB of VRAM.
    • A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
    • A three-button mouse for full functionality
    Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

  • I have a new ipad mini 3 and the sync will not complete and import iphoto pictures

    I have a new ipad mini 3 and the sync will not complete and import iphoto pictures

    What happens? Any error messages? What iTunes level? What OS X level?

  • How to install 3.1 Drivers when 3.0 will not install

    I am trying to install the Boot Camp driver on Windows 7 Home Premium 64 bit.
    The 3.0 Drivers on the Snow Leopard DVD will not install, which makes perfect
    sense because Windows 7 64 bit was not supported at the 3.0 revision level.
    But I cannot run the 3.1 update, because 3.0 was never installed.
    Is there a way to just directly install the 3.1 drivers without 3.0 being
    installed first? Or to force 3.0 to install even though the drivers installed
    won't actually work?

    No answer here either, but I want to chime in. My MBP i7 came with BootCamp 3.0.5 already installed, but the 3.1 drivers for Windows 7 won't execute properly because they claim that they need BootCamp 3.x.

  • Palm Treo 755p -- bought new computer with Vista and downloaded Download Palm Desktop by ACCESS 6.2 -- now the sync does not work, asks for drivers

    Hello...
    I am new to the Palm (~1mo.) but I was using hotsync with my old laptop which had Windows XP and was not experiencing any real problems.  That computer is going bye-bye, I bought an HP with the Vista OS and I followed the directions on downloading the Download Palm Desktop by ACCESS 6.2 from the website but now I can not get my device to sync-- The Desktop computer asks for the appropriate drivers.  I tried searching online, on the disk that came with the smartphone and even reinstalling a couple times and everything is dead in the water...
    Anyone able to help me out on this?
    Is there an additional patch of some sort to download?
    Post relates to: Palm m515

    Just in case it is not clear...  that post was made after I bought the bluetooth adapter and tried following the advice provided in the Vista 64 Hotsync solution found! post.  Again-- my statement of not working is for the following reasons:
    1) my PC tells me that the sychronization completed with errors.
    2) when I look at the log that the Backup sychronization aborted.
    3) It almost invariably tells me that it Failed to backup 1 file(s) and that file is "NetworkProfiles2" through a "Protocol Error: Unknown error. (6410)"
    4) many of my contacts (over half) duplicate during this synchronization.
    5) many of my appointments (over half) duplicate during this synchronization.
    The information about creating a virtual serial port on my PC comes from my actual palm itself.  The palm info is in the HotSynch verbage and it tells me to contact my computer manufacturer.  In doing so however they have no idea how to do this and Palm does not either.  I am still working with HP on trying to resolve that part of it but I am thinking from the hours of research that Palm wants me to create another COM port but again the help I am finding on this is beyond my pay grade so to speak...  you can check out the following link and try to help me if you like:
    http://msdn.microsoft.com/en-us/library/ms885792.aspx
    So... any ideas my friend?  It appears that some Vista 64-bit users are having success with a bluetooth synch but I have tried emailing those that claim to have been able to do this with no luck.  I am not having any luck (I hope my outline above is clearer)-- and no one has seemed to had any luck recently.
    I would love to make this work-- I bought this phone for this functionality.
    Post relates to: Palm m515
    Post relates to: Palm m515

  • Palm Desktop 6.2.2 on Win8.1 syncing but not displaying data

    I'm so pleased to have found this forum.  I didn't realise there was so much love for old Palm devices.  I started with a Palm V and worked my way up to a Tungsten T & palm Desktop 4.1.4 on WInXP and everything has been so good that I've resisted moving away from Palm Desktop as it does everything I need.  But I've just bought a new Win8.1 PC and am having some problems that I hope someone here can help with.
    I've been through the help here about installing Palm Desktop 6.2.2 and the win8 driver and the installation was very smooth and I could hotsync via usb with no apparent problem, except that Palm Desktop is not displaying any of my palm data!
    When I first ran hotsync (from the palm cradle button) it asked for a user name.  My Tungsten T was already being used on my XP PC and was full of data.  So I entered the Tungsten user name and hotsync continued.  it took a couple of minutes or so (as would be expected) and when complete it said everything was ok.  I checked the Hotsync logand it confirmed everything was synchronised correctly - but when I opened Palm Desktop there was no data being displayed.
    I then checked the data files in ...documents\Palm OS Desktop\.... and the address and datebook files are present and full of my data.  I even opened them using Notepad and could easily see loads of ascii text amongst all the 'junk' characters, so it looks as if the sync process has worked correctly but nothing from my Tungsten is being displayed in the Palm Desktop.
    I then added an event in the datebook in Palm Desktop and another event on the same day in the Tungsten.  I then did another hotsync.  It was reported as successful but the Tungsten event did not appear in the Desktop although the Desktop even DID appear on the Tungsten.  So the sync process seems to be only working one way! 
    I've never had this happen before and would really appreciate any help.
    This question was solved.
    View Solution.

    OK, try using the "Palm Hotsync Setup" program found on this page.
    Since you are using an older T|T, this may be the answer.
    There is a guide available from this website for migrating PalmOS data to Android, if interested.  I made that jump years ago when webOS was ended.  You can find it on their Home page.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • HT1752 I.downloaded.a.game.sims.3.and.the.game.will.not.install.what.is.the.problem?

    When.i.download.the.game.it.works.fine.but.as.soon.as.i.try.to.install.it.it.doe s.nothing.it.acts.like.its.about.to.do.something.but.then.nothing..I.talked.to.t he         
    people.who.i.bought.the.game.from.and.im.pretty.sure.its.not.the.game.but.the.co mputer.its.self.please.tell.me.what.i.need.to.do!

    Why are there periods between each word in your post?
    As for Sims 3, it will not run on your Mac. You should have checked the system requirements:
    FOR MAC OS X
    Mac OS X 10.5.7 Leopard or higher
    Intel Core Duo Processor
    2 GB RAM
    ATI X1600 or Nvidia 7300 GT with 128 MB of Video RAM, or Intel Integrated GMA X3100.
    At least 6.1 GB of hard drive space with at least 1 GB of additional space for custom content and saved games
    This game will not run on PowerPC (G3/G4/G5) based Mac systems, or the GMA 950 class of integrated video cards.
    http://gb.thesims3.com/game/systemreq

  • HP pavilion dv6-6c53cl - NO SOUND, DOWNLOADED DRIVERS FOR BEATS BUT WILL NOT INSTALL

    I lost my hard drive, had no back up so did a fresh install to windows 8 (64bit).  lost all of my sound.   i tried to re download drivers ,  they download but fail to install,      get a window that says ;   "the hardware detected is not surpported by this IDT software package, the install will abort".      I have tried different IDT packages with no success..   please help.

    Are you using drivers on your model's support page here?
    http://support.hp.com/us-en/product/HP-Pavilion-dv​6-6c00-Entertainment-Notebook-PC-series/5191856/mo​...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for

  • Powermac G5 Dual 2.5 wont start up? Went through all I can think of. Help!

    I have a Power Mac G5 Dual 2.5ghz with 8gb of Ram and two 1tb Hitachi Harddrives. My PCI Cards exist of a 256mb Graphics Card, a 128mb graphics card, and a Esata 4 Port card. My computer was perfectly fine when I left for work in the morning. I got b

  • Best dvd burner for Mac mini

    What brand of DVD burner is most compatible with the Mac Mini? I haven't found one that specifically lists Mac OS in the specifications information.

  • Bounce button becomes gray? Feature or bug?

    I discovered a tiny detail that I just can´t figure out: if I Ctrl - click and solo button in the Mixer, the Bnce button on the Output 1-2 channel strip becomes gray. I know that you can do exactly the above in order to disconnect the solo safe fader

  • How to optimize execution time of lot commands

    hello, in my plugin i do a lot of textinsert cmds, delete cmds, attribute setting cmds. now i wonder why this process is very slow. how can i execute many commands as fast as possible? disable a command/undo stack? how? thanks, juergen

  • Movie folder location

    Is there a way to have iTunes store movies in the same movies folder in the Finder window vs the movies folder in iTunes Music?