Palm Desktop is sychronizing With Palm Z22 but no Data is transferred?

I have typed all my contacts and calendar events into the palm desk top .The palm and desk top says that they are sychronizing but no data has been transferd.I've tried all of the conduit settings with no luck! Was able to transfer 1 contact data record from the palm to the desk top. I'm using windows 2000 pro,
                                             Thanks for any help, PKP
Post relates to: Palm Z22

It looks like you may have a bad installation of palm desktop and will need to re-install the program. Is all your data on the device as well as in palm desktop? Here is a procedure to backup the data from palm desktop.
The best way to preserve your data is to export the data in each
category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name
it something like Palm Desktop Data. Copy and Paste the link
below in a browser and follow the instructions on that page for
the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
With the data saved in the folder you created, make a copy of
that folder and save to a flash drive, cd-rw or external hard
drive. Anytime you make a change in Palm Desktop, export the data
that was changed to that folder and save again to the external
media.
With this process you can always import the data back into Palm
Desktop anytime you have a problem with the data in Palm Desktop
or if your computer/hard drive/device crashes.
To uninstall palm desktop in XP, you will need to follow this procedure;
1. Backup users folder located at one of these locations:
C:\Palm\(palm desktop username folder)
C:\program files\palmone\(palm desktop username folder)
C:\program files\palm\(palm desktop username folder)
2. Uninstall(remove) Palm desktop in control panel-add\remove programs.
3. On the start menu, in the run box, type regedit.
4. Before making any changes you need to backup the registry. Click on file-export and then save in a location you can remember, like My Documents.
5. Now go to the following Keys and delete the Palm folders. Be very careful at this point.
HKEY_Current_User\Software\(delete)Palm desktop autorun
HKEY_Current_User\Software\(delete)Palm
HKEY_Current_User\Software\(delete)Palmone
HKEY_Current_User\Software\U.S.Robotics(delete Palm entries only)
HKEY_Local_Machine\Software\(delete)Palmsource
6. Close registry.
7. Go to C:\ and  C:\Program files, see if the Palm folders are gone.
8. Restart the PC
9. Reinstall Palm Desktop.
Post relates to: Palm i705

Similar Messages

  • Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

    I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
    Below is a summary of the issue:
    After selecting datasheet view beow error occurs:
        "Cannot connect to the server at this time.  You can continue working with this list, but some data may not be available."
        "Unable to retrieve all data."
        The item counts displays say 100 out of 14000 items.
    Exporting List to excel is giving only 2000 records out of 14000 records.
    Other Observations   -  
    This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
    Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
    I have checked the Alternate access mapping setting ,its fine.
    It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
    I checked below links also ,but doesn't seem to work in my case.
    http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
    http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
    http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

    I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
    I am sharing my finding.
    1. First install the
    KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
    2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
    These two steps resolved the issue in our environment. Hope it might help others as well.
    Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

  • HT1386 Dear Sir / Madam.                              I have iphone 3 & 4. 1247 contacts is in iphone 4. When I synsing contacts not transfering. But other data is transferred.  How can I transfer the contacts to iphone 3. Thank you. Dr.Jegamohan.

    Dear Sir / Madam.
                                 I have iphone 3 & 4. 1247 contacts is in iphone 4. When I synsing contacts are  not transfering. But other data is transferred.
    How can I transfer the contacts to iphone 3.
    Thank you.
    Dr.Jegamohan.

    You are syncing contacts or trying to sync contacts how - direct with a supported address book app on your computer via the iTunes sync process, which is selected under the Info tab for the iPhone sync preferences with iTunes?

  • ISync appears to work with Palm OS, but no information is transferred

    I have set up iSync to sync Address Book and iCal when I do a HotSync on my Palm T5. I have installed the Palm on iSync, and also enabled iSync in the HotSync Manager. But the dates and contacts don't sync. The log in iSync indicates that everything is done, but nothing seems to actually change on the computer or the palm. I spent over an hour on the phone with Apple, and they finally told me that basically there is nothing else that they can suggest. Any ideas?

    This is a relatively generic HotSync Manager error, usually invoked by the presence of Verizon's Wireless Sync software on a smartphone (obviously, not in your case) or a lack of free memory on an organizer or smartphone. It can also be attributed at times to the presence of such Palm OS contact management software as Agendus. In any case, contacts cannot be synchronized because the database cannot be opened by the HotSync Manager. It is exclusively a Palm issue, not one attributable to iSync or to OS X.
    The reason that it does not occur when running the Missing Sync for Palm OS is that the Missing Sync installer replaces both the HotSync Manager and Transport Monitor, using instead, roughly equivalent but extensible programs written by Mark/Space engineers. In effect, no HotSync Manager: no problem.
    Solving the issue will require that you contact Palm, as none of the 'usual suspects' seem to apply to your situation, and the fix is not as simple as just reinstalling the HotSync Manager.

  • Palm Z22 Desk Lost Data

    I use Vista and Palm Z22. Recently I noticed that some information, strangely not all, that I inputted in Calendar, disappeared after a while. Please advise how to fix this problem as soon as you can.
    Thank you.
    Post relates to: Palm Z22

    I'm having the almost exact same problem. My boss was having no updates from repeated HotSyncs. Unfortunately, he asked for my assistance (I'm the "tech guy" but I have NO expereince with Palm). I looked at his Palm Desktop app. and noticed that in the "user" selection it was set to "None." I used the pull down menu to select his user name. ALL of the recently entered information disappeared! I could go back to the "None" slection and it looks like all of the files got updated at the moment I changes the user. Is there any way to get this data back?
    The version of Palm Desktop is 4.2.2 running on Mac OS 10.4.11. The device is a Z22.

  • Hot synch problem - Palm Z22 - stalls on Date book synch....

    I have a palm Z22.   I've had it for several years.  Recently, I downloaded 6.2.  
    When I hotsync, everything comes up as it should but it freezes on the datebook synch.
    Here's what gets done in a nano second:
    Package installer
    Install
    Install Service Templates
    Install to card
    Hot Synch Exchange
    Date Book  - it aways stops here....13 green bars, 2 of 12 complete.
    Does anyone know how to correct it?
    Thanks,
    sdm
    Post relates to: Palm Z22
    This question was solved.
    View Solution.

    When I hotsync, and the display pops up, I seem to have some double items....
    My previous problem (fixed by dbfixit as suggested on this forum) was the hot sync was stalling on the second date book.
    I see that when it's hotsyncing, it is checking off one at a time...
    Should I delete the duplicates and how do I do that.  (they are not listed as duplicates on my hand held that I can see.
    All this is hard work for me, so appreciate this forum and all your help.  sdm
    Package Installer
    Install
    Install Service Templates
    Install to Card
    Date Book
    Date Book
    Address book
    Address book
    To do list
    To do list
    Memo Pad
    Memo Pad
    Addit

  • RFC Adapter work well as receiver but no data got transferred

    I have a JDBC>XI>RFC scenario, I can fetch the data from the ORACLE database side and both the sender and receiver communication channel works well, also when I set an external break point in the RFC module I can dubug it on the ECC side, but
    there is no data being transferred to the TABLES parameter, why this happens and how to correct it?
    by SXI_MONITOR, I can see message has been flagged as "finished" without any error message, and the payloads from the JDBC adapter is not initial, then i copy the XML file to conduct a mapping test in the ESR, it works fine. But i still can not get any data from the TABLES parameters of the RFC.
    I created one action under a different namespace, which will be used to create the process integration scenario, is this might be the cause? but i have assigned the RFC to the action as inbound interface

    Hi AR,
    Thanks for your reply.
    I got the following audit log:
    Time Stamp     Type     Description
    2010-06-24 05:29:35     Information     Channel ZCC_FLIGHT_SND_01: Executed Query successfully, confirmation skipped - data may be send again ("TEST" mode).
    2010-06-24 05:29:35     Information     Send query result, size 47198434 characters.
    2010-06-24 05:29:36     Information     MP: entering
    2010-06-24 05:29:36     Information     MP: processing local module localejbs/CallSapAdapter
    2010-06-24 05:29:36     Information     The application tries to send an XI message asynchronously using connection JDBC_http://sap.com/xi/XI/System.
    2010-06-24 05:29:36     Information     Trying to put the message into the send queue.
    2010-06-24 05:30:03     Information     Message successfully put into the queue.
    2010-06-24 05:30:03     Information     The application sent the message asynchronously using connection JDBC_http://sap.com/xi/XI/System. Returning to application.
    2010-06-24 05:30:03     Information     MP: leaving
    2010-06-24 05:30:03     Information     The message was successfully retrieved from the send queue.
    and the message content:
    <ns1:ZPM_FM_006>
    <I_PMT001/>
    </ns1:ZPM_FM_006>
    but when i do the mapping test in the ESR, i got the right result:
    <ns1:ZPM_FM_006 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
       <I_PMT001>
          <item>
             <ZPLAN_DEPD>20040807</ZPLAN_DEPD>
             <ZPLAN_DEPT>090700</ZPLAN_DEPT>
          </item>
          <item>
             <ZPLAN_DEPD>20040807</ZPLAN_DEPD>
             <ZPLAN_DEPT>090700</ZPLAN_DEPT>
          </item>
          <item>
             <ZPLAN_DEPD>20040807</ZPLAN_DEPD>
             <ZPLAN_DEPT>090700</ZPLAN_DEPT>
          </item>
       </I_PMT001>
    </ns1:ZPM_FM_006>
    ZPM_FM_006 is the RFC name and I_PMT001 is the TABLES parameter of the RFC.
    Seems the mapping has not been conducted,why can this happen and how to correct it?

  • Data Sheet View - Cannot Connect to Server at This Time. You can continue working with this list, but some data may not be available

    After a couple of years of trouble free operation, one of the lists in our SharePoint Foundation site suddenly (overnight) started presenting the error against Datasheet views on lists.
    The view returns a large number of items when working correctly c.6K - however Throttling Settings have been adjusted accordingly some time ago without detrimental affect on SharePoint users and network in general. As admin and therefore throttling at 20k
    items the error message still presents.
    The view was working fine at 4:30pm Wednesday 27/3, but was returning the error at 8:30am the next morning. To my knowledge very few items (if any) had been added to the list between those times and no system level changes had been made (SharePoint,
    SQL Express, or virtual Windows 2008R2 server).
    The problem is most apparent on 2 lists in SharePoint. I've checked that the settings within SharePoint admin are set to deal with queries that should accommodate the
    number of rows that are returned by the views associated with that list. It is still possible to create new items to the list and access data via 'standard views' that are presented with groups that are collapsed.
    Items in Documents Libraries on other parts of SharePoint and within the same subsite can be accessed at what feels like pretty normal speed -though small query size
    may mean the problem is masked to a large extent.
    More Specific
    The lists still open in Standard View -though much more slowly than was the case before the above error started to present.
    List Details
    Referrals Tracker (10,442 items) -the list was 10,420 something items on Wednesday when all was working fine.
    LD Tracker (4,390 items)
    Both lists have grown incrementally over the period of a couple of years rather than by adding a block of data to the list. Items are added/ updated one at a time using the associated
    form or directly into cells within a datasheet  view.
    That it is also experienced against the smaller list suggests to me that the number of items in the Referrals Tracker is not the main factor here.
    In attempting to resolve the issue I have managed to get datasheet views working that deliver 100 items and c2k items. Both views present much more slowly than we would normally expect.
    Throttling Settings
    List view limit - 12K items - has been this high for some time without damaging SharePoint performance across the company.
    Actions Taken So Far (no improved performance seen)
    The SharePoint Foundation WSS Content DB did was closer to the 10GB SQL Express limit earlier this month, however a clear down and rationalisation of versioning settings
    was undertaken to ensure that did not become a problem going forward.
    We did a Shrink on Thursday (the day the issue started presenting) to rationalise whitespace as all indicators were that this was where the problem may lie, but this has
    not resolved the problem.
    The WSS Content DB now sits at c5.5GB.
    What I Need to Know
    1) I'd like to understand what is causing the problem?
    2) What the fix is? or,
    3) How I might go about diagnosing the problem further to arrive at a fix.
    With all the above, I'm part wondering if the problem is related to the virtual server or poss SQL Express related rather than being a 100% SharePoint issue?

    Hi
    afearn,
    More often this is related to columns which are not editable by user, some columns are not editable in datasheet view. Please check if there is any new column addition and then you started getting this issue.
    Also datasheet view displays all items on same page so definitely it takes little long time then load in standard view.
    Let us know your results, thanks
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • Palm z22 reset?

    i need to hard reset my palm z22 but i dont know how to do it.
    could someone explain how to do this?i would greatly appreciate it!!
    Rick 
    Post relates to: Tungsten E2
    This question was solved.
    View Solution.

    Is there a reason for the hard reset? Or can we help you with a specific issue with your device? If it is just a need to hard reset. You want to hold down the power button press and release the reset button(on back) keep holding down the power button till you see palm powered or access powered. From there press up on the five way nav. On the bottom
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 with screen shots also shows how to do other resets
    Post relates to: Palm Z22

  • Sync with exchange server, setup ok, but no data synced

    Hi,
    i just setup a connection to an exchange server, the setup went ok, but no data is transfered.
    i tried a different server, where several iphones (all 3g) are working ok. even on this server the 1st gen iphone is not syncing.
    any ideas?
    tTIA
    .h

    Exchange links
    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/HT2099?viewlocale=en_US
    http://support.apple.com/kb/TS1693
    http://www.apple.com/iphone/enterprise/
    Hope these help.

  • Internet sharing: connected but no data

    Using MB Air 10.6.8 as host to share a USB Mobile Modem Internet connection.
    Connected a MB 10.7 as client via Airport to use the shared, working USB connection of the host.
    When making the network diagnosis on the client every light is "green", but no data is transferred from the web, the Safari screens remain empty.
    Its not the first time that I am making a internet sharing setup, but first time unsuccessfully.
    Any hint is appreciated

    For what it's worth, I'm having the exact same problem. I have been using the same setup for almost two years, Mini with Internet Sharing turned on, sharing over wifi, but suddenly this morning it just stopped working. Full bars on all devices (iPad's, iPhone's, etc.), but no Internet connection. I have tried restarting, resetting, etc., but nothing works. Not a happy camper right now.

  • How to change owner on purchased palm z22 to sync with my desktop program

    How do I sync my new palm that has an owner name on it. I would like to sync with my desktop that has all my information. I can't seem to get it to sync with desktop ver 4.2
    Post relates to: Palm Z22
    This question was solved.
    View Solution.

    The fastest way to remove the profile is to hard reset the device: here's the link http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
    Message Edited by IrreducibleM31 on 05-28-2009 07:35 PM

  • Isync3/Ical no longer working with Palm z22

    I'm not sure when it started, but all of a sudden my ical stopped being able to sync with my Palm z22. It always used to give me an error message at sync, but I ignored it because it always transferred over 100% of the information I was using anyway (I only use calendar and address book).
    First it stopped syncing my contacts, and then finally it stopped syncing the main parts of my Ical. As far as I can tell it still brings over events but places them in the "undefined" tag at 7am that day, without any notes: totally useless.
    I tried everything I could think of last night after googling for four hours and eventually an Isyncing caused a fatal error on my Palm which lost my entire contact list. Which now renders the thing useless until I can restore it. I run a business and work out of it!
    The error I'm getting says this (I bolded the part I think is the problem, after multiple searches):
    "HotSync 3.2.1 started 8/17/08 9:01:14 AM
    Local Synchronization
    OK Install
    iSync Conduit starting 8/17/08 9:01:15 AM
    User heather configured for Palm Address Book conduit and corresponding iSync data class, skipping iSync to avoid conflicting modifications 8/17/08 9:01:16 AM
    iSync Conduit: Sending Error Response 6: User heather configured for Palm Address Book conduit and corresponding iSync data class 8/17/08 9:01:16 AM
    *iSync Conduit: received NULL message, disconnecting...* 8/17/08 9:01:16 AM
    OK iSync Conduit
    OK Voice Memo
    To Do List did nothing
    OK Tasks
    Unable to sync the file '1.jpg' on desktop. Error code: -8850.
    Unable to sync the file '2.jpg' on desktop. Error code: -8850.
    Unable to sync the file '3.jpg' on desktop. Error code: -8850.
    Unable to sync the file '4.jpg' on desktop. Error code: -8850.
    OK Media with 4 message(s)
    OK Note Pad
    OK Memos
    Memo Pad did nothing
    Date Book did nothing
    OK Contacts
    OK Calendar
    Address Book did nothing
    OK Install
    Backed up Saved Preferences.prc
    OK Backup
    Last sync time and PC ID updated on handheld
    HotSync Complete 8/17/08 9:01:21 AM"
    Please help - as I said I run my business out of Ical, address book and the ability to sync with my palm.

    Internet searches for hours provided absolutely no help either.
    I'm actually really cheesed that no one seems to have paid any attention to this issue.
    I ended up having to hard-reset my device (everything is backed up on the computer and I can't sync anything new so it's USELESS to me now), reinstall everything from scratch and try again : now I don't get an error message, but when it comes across the "iscync conduit" message on the hotsync message it lags for a LOOOOONNNNGGGGG time. Several minutes at least. The first few times I reset it thinking it was frozen.
    And then at the end of all that nothing transfers anyway!
    So, I'm done. I'm selling it to someone else. It's now a useless device to me thanks to whatever changed in Mac recently.

  • Palm Z22 and sync with Windows Vista 64-bit system

    I have  been trying to sync my Palm Z22 with a new laptop that is running the 64-bit Vista.  Based on some posts I had located, I ordered an IrDA Wireless Bridge to try to resolve the connection problem.  Something isn't working right and I can't figure out how to fix the problem.  The IrDA adapter is listing in the hardware option on the computer so it appears to have installed correctly.  The laptop has inconsistently recognized the USB connection when I plug it in however.  I can not seem to get the IrDA adapter to recognize my Z22.  I've got the Z22 set up to use the infrared to transfer information.  I have noted that the "beam" feature is ON.  I have looked at APPS and have observed that most of those options are "locked" and when I have clicked on "contacts" for example, it says it's a locked app and can not be beamed.  I don't know if that is part of the problem  or unrelated.  I also happened to observe that the Apps are listed as what to transfer with MODEM connection but I'm not sure why that is even showing as a connection option since I've never used the modem to connect.
    I can successfully use my Z22 to connect via USB cable to my Vista 32-bit computer system.  I'm not sure what I'm doing wrong in my attempts to use the adapter and connecting the Z22 with the new laptop. 
    I'm not sure what else to do and would very much appreciate some help with this.  Could someone PLEASE tell me what I may be doing wrong re: the setup connection between the adapter and Z22 or any other ideas re: what the problem may be concerning why I'm not yet being successful in getting this setup to work...? 
    Many thanks in advance for any assistance with this problem.
    Post relates to: Palm Z22

    Sorry for the delay in replying (bet you were hoping this worked, huh?) but it has taken some time to uninstall & reinstall the Palm software and make numerous attempts to configure the information to again try to sync the Z22 with the laptop.  I went back to amazon.com and located the device I'd purchased to confirm it would work with the 64-bit Vista.  Someone had posted their success in using the adapter for exactly what I need to do - sync my Z22 with a 64-bit Vista computer.  That consumer's posting noted: "The USB 1510 provided the solution. As soon as I plugged it into the USB port of the laptop, Vista went online, found the driver, and installed it. I was able to set up IR Hotsync as I would have on any laptop with a built-in IRDA port."
    I don't know what problem I'm having but have noted that my palm desktop software doesn't note what device (Z22) is to be connected and I can't find anything in the HotSync manager that allows me to specify that device.  For some reason, I had gotten an error message and it referenced a Treo connection which is odd since I don't have a Treo and I downloaded this Palm desktop from the Z22 site online...?  I did note my software on my Z22 is a v. 5 but when I checked various support sites online, it appears to indicate that version on my Z22 would be compatible with the Palm 6.2 version I just downloaded to my computer (and I can't find any information to indicate a newer software for my Z22 is available or how to do that either).
    So, I'm back to not being able to get my Z22 to be recognized by my computer via the infrared adapter.  I'm hoping that some of the added information I've been able to provide may give another clue of something else I can try before I have to give up and contact Amazon to return this device and either try to decide what other device may be an option.  I had checked with a local computer supply store here but they don't carry any type of device for this purpose so that's why I resorted to searching online for a solution to this problem.
    Thank you in advance for any assistance you may still be able to provide.  I really do appreciate your time with this matter.

  • Hot Synching Palm Z22 with 64 bit Windows 7

    I just purchased a new Sony Vaio running 64 bit Windows 7 and I'm unable to Hot Sync my Palm Z22 to my computer.  I've been a Palm user for years, with my current one being my 3rd model and it's been my lifeline but I'm highly agitated and frustrated that the Palm folks haven't posted any updates to handle my current situation.  Everything I read here indicates spending additional money to go the infrared route and some people aren't even having success while others struggled a long time to make it eventually sync.  Does anyone out there have an identical situation as mine, who'd be willing to give me sound advice as to what I need to do and how to do it in order to get my Palm to communicate with my 64 bit Windows 7 platform?  Thank you to anyone who's able to assist.
    Post relates to: Palm Z22
    This question was solved.
    View Solution.

    @MrCobol:
    This subject has been discussed and beaten to death in many other threads here.  The facts (again) are:
    1. Palm sold the rights to Palm Desktop many years ago.  Railing against Palm/HP makes no sense.  If you want an update, complain to Access of Japan.  They are the owners of the software, and they chose to drop the ball.
    2. Many other companies have struggled to come up with 64bit drivers for their existing software (that they actually own!)
    3. Palm OS devices were EOL'd quite a while ago.  They were supported through Vista 32 bit.  Microsoft changed things, and you chose to buy a 64bit system.  HPalm has moved on to a whole new OS and devices, and support for PalmOS is nearing an end.
    Yes, it would have been great if Access stepped up to the "plat" and provided a 64bit version of Palm Desktop, but that didn't happen.  Workarounds have been provided on this forum by devoted users, and they do work!
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for