Palm Desktop saves and exit very slow; losing data above letter "t"; duplicate records created
Since I installed Palm Desktop by ACCESS (v. 6.2.2) on both an XP and a Vista Home Premium PC (one is a notebook, other a desktop), two critical issues have arisen:
1) when I make any change in the records and save (File - Save all OR Control S), it takes about 45 seconds to complete the save. This is also how long it takes to exit the Palm Desktop. With previous versions of Palm Desktop, these functions took a couple of seconds. This problem exists with only a few records in the data base, as well as thousands of records. It has nothing to do with the McAffee program - tested that.
2) in the Contacts data base, every now and then, all data above the letter "t" disappears. I can recreate the missing data either from a backup of the data base or by doing a hotsync.
3) every now and then, I discover that all records have been duplicated - this happens on both the PDA and the Palm Desktop. In this case, I need to use the latest backup files, load them into the Desktop, then do a hotsync with the Desktop overriding the Handheld.
Any suggestions on what could be causing these problems? Palm's staff has been clueless.
Post relates to: Palm TX
Lesson: Use the correct software version!
Re-installed using PD414EN and all is good! Hurray!
Similar Messages
-
LiveCycle 8.0 saves and previews very slow
I have a file that is about 75 pages long, and a total of less than 1000 fields. It takes over 5 minutes to save or preview. What could be wrong?
It loads fairly fast in Reader -- less than 30 seconds.
I'm developing on Vista Home Premium, 2 GB Ram.
Help!Any hints would be appreciated! :-)
Thanks! -
Mac os x lion 10.7 on mac book pro not updating and running very slow
i am using mac os x lion 10.7
problem it is not updating and running very slow. How to improve?If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage" && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {/,}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important, so don't worry about it.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type nothing in the Terminal window except your login password if and when prompted.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window. You don't have to copy the output; just paste into your web browser.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary. -
In 3.6 when ever I closed the browser with multi tabs open it would give me the option to Save and Exit. Then when I reopened the browser it would give me the option to open the previous session. I could also bookmark all open tabs. All of these features appear to no longer be present in 4.0. If this is the case I will be forced to uninstall and reinstall 3.6.
Bookmark All Tabs - you can get it when you right-click on a tab, or use keyboard shortcut Control+Shift+D.
Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time" -
3 year old iMac 24 running OS 10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem? Does not happen on MacBookpro only on iMac.
Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts? -
Healing brush/Clone stamp tool and others very slow processing
Healing brush/Clone stamp tool and others very slow processing. System resources monitor shows only 700MB (of 5GB allocated to Photoshop) RAM and 30% CPU is used to perform such tasks as healing brush. Process bar comes up and is painfully slow to complete the task. I don’t understand why does Photoshop not use all the resources available/allocated? No other programs are running at the time, I have tried all the suggestions on this forum and all over the Google. My brand new system is: Intel I7 4770K overclocked to 4.3GHz, 8GB 1600 RAM, Samsung PRO 120GB SSD system drive, 100GB scratch disk. The photos I usually work on don’t exceed 20MB in size. Any suggestion would be appreciated. Thanks
Thanks for the answer.
I have not mentioned the GPU because the processes I described (as far as I know) are not supposed to be using GPU resources. So far I have not been able to afford the GPU i want which is GTX770, so I use Intel 4600 built in graphics instead. To be honest I find, that 4600 graphics is quite powerful. I am able to play Mass Effect 3 on Full spec on max res without game slowing down. And Windows 7 64bit index score is 7.8 for the 4600 graphics. Overall index score is 7.8 on my PC righ now.
I'll try to get the Photoshop system info as soon as possible.
Thanks again.
Zee -
Videos skip and are very slow when I play them in anything other than fulls
When I try to play a video it is ok when it is in the small box in the corner but when i double click and get the video larger it skips alot and play very slow, but when I make the video full screen it play normally. How can I play the video in the mid size box in the right way.
Crop...
I'm having the same problem (iTunes 11.02!) .
I think this one isn't resolved because it IS rare: I've had iTunes on about 7 different machines (Mac and PC) since it begain (2001). In fact I maintain the same library without issues for over 10 years. Anyway this is the first time it's occurred (in my case it's happened on a pretty recent Mac Laptop). But as you may have discovered, google/bing searches for similar problems yeild VERY few results.
A guy at the Apple store was able to temporarily fix by doing some low level cache removal, that may give a glimpse to the reason, but is not a permanent fix.
I'm going to try a few things will report back if I have any luck**.
***If anyone else want to give it a try: Before starting bookmark the following: http://support.apple.com/kb/HT1391 this describes the location and purpose of most of the iTunes library files. And, any apple support docs on creating a new iTunes library... I'm unwilling to try the let iTunes "Keep iTunes Media folder organized " cause I have my own organization method. -
My iPod now loses my Klondike scores/settings after I "save and exit". How can I fix this?
After my last iTunes sync, my iPod loses my Klondike scores/settings after I "save and exit". How can I fix this?
I'd try a hard reset, you have nothing to lose. If that doesn't help and you can shut off the iPod (i.e. the white screen becomes black) you can try to recover it: http://support.apple.com/kb/HT1808
If that still does not fix the problem and it was Apple that replaced the iPod, return it to them, you have a 90 Day Warranty. If you replaced the screen yourself, I have no idea if you did something wrong in the repair or if the replacement screen was defective. That is the main risk of a self repair. I doubt whether Apple will do an out-of-warranty repair on an iPod that has been opened, but you can try. -
Firefox maxing my cpu and runs VERY slow i have reset firefox and re installed it, diddnt work
firefox maxing my cpu and runs VERY slow i have reset firefox and re installed it, diddnt work i have googles searched about it and tryed so manny things to fix it but nothing works this is my last idea posting here
Did you do a clean reinstall and deleted the Firefox program folder?
*(32 bit Windows) C:\Program Files\Mozilla Firefox\
*(64 bit Windows) C:\Program Files (x86)\Mozilla Firefox\
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Built-in SSH Terminal question on how to save and exit
Howdy, Heres my question and problem.
I haven't been able to figure out how to save and exit the editor for the SSH terminal that the mac has. I've read that to save you press control -O hit return and to exit hit control -X but that doesn't seem to be working.
I'm trying to install imagemagick onto my web server and I get stuck at that point of saving and then exiting.
can anyone tell me how to save and exit the editor?
I hold down control press -O i let go of the buttons then i press control -X and it stays at the same editor like nothing happened. I try quitting the terminal and reloading it all but that just causes me to restart and nothing saved. and I actually hit the "-" key should i do that or no?
heres the instructions I'm following for the imagemagick install.
(For this next part, if you don't have "pico", you can use "vi" instead)
$ cd libtiff-lzw-compression-kit
$ pico Makefile
change
TIFFSRCDIR = /tmp/libtiff
to
TIFFSRCDIR = ../tiff-v3.5.5
Then save and exit the Editor $ make install
$ cd ..
$ cd tiff-v3.5.5
$ ./configure
thanks for any help
-Ahufsctrl+x (thats both keys at the same time) will invoke the exit of the program. at wich point if youve made changes to the file it will ask you if you want to save the data or not. If yes you need to type yes or y and hit enter... if no then no or n. Then it will ask you what you want the file name to be with the default being whatever the file was that you opend to buffer to work on so in most cases you hit enter again.
hitting ctrl+o (thats both at the same time again) should write the file out and close the application without prompting i think (i dunno for sure... i always use ctrl+x myself).
At least thats on the OS X version of pico... your server is probably linux so it may differ although i wouldnt expect it to. my pico bindings have always been the same from Debian to CentOS to Darwin.
Also i msut ask... why cant you pass the TIFFSRCDIR as an option to ./configure like normal instead of manually editing the make file? -
My facebook app on Ipad downloads pictures and videos very slow. a few of the pics are also blurred.What to do?
Hi Skye_Starkey,
Im sorry to hear that you are having issues with your internet service. I know this can be very frustrating and I apologise for the inconvenience.
You can check to see if there is an outage in your area by entering your postcode and suburb in our service status checker: http://servicestatus.telstra.com/servicestatus/goc.do?q=summary.html
Please powercycle your modem and computer: Unplug from power > Leave off for 10 - 15 mins > then Plug back in and re start. This will often force a line update through to your modem advising the signal is restored.
Please make sure you have not exceeded you monthly usage allowance and have been shaped (slowed). You can do this via My Account http://tel.st/cpyn
Here are some other DIY support tools you can try.
Is your ADSL service running as fast as it could be?
http://crowdsupport.telstra.com.au/t5/Coverage-Network-KB/Is-your-ADSL-service-running-as-fast-as-it-could-be/ta-p/311953
How to test your speed
http://crowdsupport.telstra.com.au/t5/Home-Broadband-KB/Testing-your-broadband-speed/ta-p/278139
Make sure your modem settings are correct
http://crowdsupport.telstra.com.au/t5/Modems-Hardware-KB/BigPond-Modem-settings/ta-p/251263
ADSL Self service tool:
https://www.telstra.com.au/webforms/cares/
Change your line profile:
http://crowdsupport.telstra.com.au/t5/General-Internet-KB/Change-your-ADSL-Line-profile/ta-p/110182
How to peform an Isolation test:
http://crowdsupport.telstra.com.au/t5/General-Internet-KB/How-to-perform-an-Isolation-Test/ta-p/55014
ADSL Troubleshooting tips
https://go.telstra.com.au/helpandsupport/-/adsl-troubleshooting-tips
If you try all the steps in these articles and have no luck with your connection, Please speak to our Technical support team. You can contact them
on 133933 or you can also contact them via our Live chat service here: http://tel.st/49kl
Regards - Tom
-
After downloading ver 4.0, i do not have the option of "exiting" or "sava and exit." Only "exit"
My most favorite benefit of Firefox is that I can "save and exit" I recently downloaded the newest version , 4.0. Since then when I goto "file>exit> click to execute, I am not given the option of "save and exit" How do I get this feature back?
Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time" -
Palm Desktop seems to back up only select data from Treo 650
I recently transferred my Palm Desktop program and backup files from my old XP PC to my new PC running Windows 7 (64bit). Aside from the frustrations of being unable to HotSync using USB, I was more concerned that that address & calendar files in my user folder were nearly empty. My calendar contained 14 random events from within the last month and the address book contained three contacts (my Treo contains hundreds). Each folder should have contained considerably more data. I went back to the original user folder on my old PC and the saved data was no different. Although hundreds of events & contacts appear on my Treo and in the Palm Desktop, my user file has less than 1MB of data in those respective folders.
Can I conclude that my monthly HotSyncs have been faulty all of this time? Or am I looking in the wrong place for my complete data. Until I find a workaround the Windows 7 problem, I want to make sure all my data is at least present on the hard-drive (even though I can't HotSync).
FYI, this is where I found my skimpy data: C:/Palm OS Desktop/(username)/address and C:/Palm OS Desktop/(username)/datebook . The Palm Desktop is Version 6.2.2
Thank you!
Post relates to: Treo 650 (Sprint)An update to the above issue: All of the datebook & address data IS present within the *.aba files within my user folder when opened via Microsoft Access. However, when I import those files into Palm Desktop, only a small handful of events (28 out 5000+) and addresses (3 out 1000+) appear.
-
Oracle 10gr2 Master/detail form running very slow when you navigate to the detail record.
Hi All, I have a master detail form, running in webserver, when I navigate to the detail block, the form start buffering and buttering for about 2 min. There is a trigger when-new-record instance that is firing when you navigate to a new record : The select part of this stament is taken a long time to execute. I modified this in toad and what used to take 25 seconds to run is taken less than a second now, but the slowness still persists in the form.
for rec in (select wrrh_col
wpbh_col_lvd,
wpbh_col_doc_no
from wh_col,
wkpl_col,
wh_col
where wrrh_col_no = :block.wreh_wrrh_col_no
and wrrh_col_no = wreh_wrrh_col_no
and wrrh_col_no = wpbh_col_no
and wrrh_col_proj = wpbh_col_proj
and wrrh_proj_no = wpbh_proj_no) loop
if fun_name(rec.wpbh_col_lvd) = 'Y' then
do something,
end if;
end loop;
The select staement that used to run for 23 seconds is running in less than one second, but the form is still running very slow when I navigate to the detail record.
Please advise.
Thanks.Thanks Andrea for your prompt response, the problem is the select statement and like I stated, I tuned the select statement in toad and what normally takes 23 secs is taking less than 1 sec to run. If I comment out the call to the function, it is still slow. The select stament will returned null and it will still be slow. When I comment out the for loop, it run very fast. I dont know what else to do than tuned the select statement.
-
MacBook Pro not loading websites and performing very slow
LLast couple months my MacBook has begun to slow down and now it does not even load websites. Other applications also run very slowly. Any help? Let me know if you need additional information. Thank you SO much!!!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1226 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 40 500 300 85 25 20480 262144 20 2000 524288 604800 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays CFBundleIdentifier 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' 'com\\.apple\\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' '%s %s\n' '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );b=(com.adobe.{AAM.Updater-1.0{,},AdobeCreativeCloud,CS{4,5}ServiceManager,fpsaud,SwitchBoard{,}} ${k[21]}{aelwriter,{AirPortBaseSt,SafariNotific}ationAgent,FolderActions.enabled,installer.osmessagetracing,mrt.uiagent,ReportCrash.Self,{rp,usb}muxd} com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.{agent,daemon} com.microsoft.office.licensing.helper com.oracle.java.{Helper-Tool,JavaUpdateHelper{,}} com.teamviewer.{Helper,teamviewer{,_desktop,_service}} org.macosforge.xquartz.{privileged_{,},}startx );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~"uts"&&$2>'${p[19]}') { print $1" "int($2);} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/[Sp]|'${k[21]}'");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print;} END { split("'"${b[*]}"'",b);split("'"${c[*]}"'",c);for(i in b) print b[i]".plist\t"c[i];} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' $2=="=" { gsub(/[()"]/,"",$3);print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { u1="Mb/s";u2="per sec";u3="ms/s";u4="KiB/s";u5="%";u6="total";u7="MB";u8="ports";u[1]=u1;u[2]=u1;u[3]=u3;u[4]=u4;u[5]=u5;u[6]=u6;u[7]=u7;u[8]=u8;u[9]=u2;u[10]=u2;u[11]=u2;u[12]=u2;l[1]="Net in";l[2]="Net out";l[3]="I/O wait time";l[4]="I/O requests";l[5]="CPU usage";l[6]="Open files";l[7]="Memory";l[8]="Mach ports";l[9]="File opens";l[10]="Forks";l[11]="Failed forks";l[12]="System errors";for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' END{if($3~/[0-9]/)print$3} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[18]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[18]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[19]}"'\\ :'"${k[16]}"' \""$0"\"/*/'${k[20]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[20]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[17]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;1s/:/ tree/;/^ +[MPSV].+: ./d;s/:$//;p;' 's/,.+"//p' '|grep -q e:/' '/[^ .]/p' '{ print $1}' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[18]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route egrep 'dscl . -read' );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[20]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|calling|(complet|enabl)ed|ry HD' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA\(|pagin|error|Refus|TCON|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0 < 0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno != 0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} -P -m\ / '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[16]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[16]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' "-o ',\"name\":\"[^\"]+' L*/A*/Fi*/P*/*/a*.json" users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$Sender \$(RefProc): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "^ |sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[16]}'=*"' );N1=${#c2[@]};for j in {0..15};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM Bundles{,' (new)'} );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D${i}0'(){ A'$i' $@;C0;};';for j in 2 3;do eval D$i$j'(){ local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D10 0 N1+1 2;D10 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D12 22 15 63;D10 0 N1+2 3;D10 0 N1+15 17;D13 3 0 N1+3 4;D13 4 0 N1+4 5;D13 N3+4 0 N1+9 59;for i in 0 1 2;do D13 N3+i 0 N1+5+i 6;done;D13 N3+3 0 N1+8 71;D13 62 1 10 7;D13 10 1 11 8;B2&&D13 18 19 53 67;D12 11 2 12 9;D12 12 3 13 10;D12 13 42 70 101 25;D12 65 6 36 13;D12 45 20 52 66;D13 66 7 37 14;D13 17 8 15 38;D10 9 16 16 77 45;C4;B2&&D10 35 49 61 75 76 78 45;B2&&{ D10 28 17 45;C4;};D10 12 40 54 16 79 45;D10 12 39 54 16 80 45;D13 31 25 37 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D13 19 21 0;B2&&D13 40 10 42;B2&&D12 2 29 35 46;D12 44 34 43 53;D12 25 22 20 32;D12 33 0 N1+14 51;D12 34 21 28 35;D13 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D13 50 38 5 68;B4 19 0;D23 37 33 34 42;B2&&D13 46 35 45 55;D13 38 32 31 43;B2&&D13 59 4 65 76 91;D13 63 4 19 44 75 95 96;B1&&{ D13 53 5 55 75 69&&D13 51 6 58 31;D13 56 5 56 97 75 98&&D10 0 N1+7 99;D12 55 5 27 84;D13 61 5 54 75 70;D13 14 5 14 12;D13 15 5 72 12;C4;};D13 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 11 7;B4 11 11 73 102;B2&&{ A1 18 26 94;B7 11;B4 0 0 11;C3 23;};A1 18 26 94;B7 11;B4 0 0 11;C3 24;D13 60 14 66 92;D13 58 14 67 93;D13 26 4 21 24;D13 42 14 1 62;D13 43 37 2 90 48;D13 41 10 42;D12 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D13 9 41 69 100;D12 29 21 68 35;D12 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D13 54 5 7 75 76 69;D13 52 5 8 75 76 69;D13 57 4 64 76 91;D12 0 4 4 84;D12 1 4 51 84;D13 21 22 9 37;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D20 31 47;D13 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D13 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
HT1689 my contacts all of a sudden disappeared off my iPhone 4S with IOS7. Anyone know what is up?
my contacts all of a sudden disappeared off my iPhone 4S with IOS7. Anyone know what is up?
-
Testing Inbound IDoc via WE19...
Hi, I am trying to learn IDOCs via WE19. I just took a sample IDOC from WE02 and tried to test in WE19. I am trying to understand what do we mean by following: 1) Process Inbound IDOC via file ? 2) Process Inbound IDOC via function module ? Regards,
-
Hi,I recently downloaded sentinel mobilesafe to my iphone 4s. When trying to set it up,it asks for the phones name. What is this and where do i find it? Thanks
-
Windows Activation - an Error has occurred - Error 0xC0020012
Hallo, since last week my Windows Server 2008 R2 Standard Server comes with a black screen. Control Panel - System - Windows activation: Status not available / Product ID: not available. I start slui.exe with different options in a administrator cons
-
[solved] Building with JHBuild needs the Python libxml2 package
Hi all, I'm attempting to build GNOME Music with JHBuild. It's failing with an error about needing the Python package for libxml2 while building itstool. You can find my jhbuildrc here. Here's the log: *** Checking out itstool *** [2/64] *** Configur