Palm E2 hotsync with Mac Snow Leopard

Does anyone know how I can hot-sync a Palm Tungsten E2 Version 4.1.4 with Mac OS X 10.6.3 Snow Leopard please?  Many thanks.  Wendy
This question was solved.
View Solution.

The Missing Sync picks up where Apple dropped HotSync support in Snow Leopard.
http://www.markspace.com/products/palm/palm-sync-software.html

Similar Messages

  • Is HPLaserjet 1100 compatible with MAc Snow Leopard?

    I can't locate an HP laserjet 1100  Driver for the Mac Snow Leopard.  Are they compatible? 

    brookeg374 wrote:
    I'm having issues with it installing on my computer.  It says my computer won't support it.  It's an older computer, I bought it in 2006. It was the first macbook pro. It's original operating system was leopard but it's been upgraded to snow leopard.  I'm not a computer guru just so you know Here are the specs of this computer:
    Any help would be much appreciated!
    It's probably not a 64-bit capable processor. Check in the Apple menu->About this Mac what it says your processor is. You need at least a Core 2 Duo. The original Core Duo cannot run 64-bit code and Lightroom requires a 64-bit capable processor: http://www.adobe.com/products/photoshop-lightroom/tech-specs.edu.html

  • Unable to share a fat32 partition with macs (snow leopard)

    i have a hard drive with two partitions in it, im able to share one of them formated for mac, but im not able to share the fat32 partition? what is going on?
    it is connected to an imac (snow leopard)
    trying to share it with macbook pro and windows pc
    please help?
    pd: when i use to have mac 10.5 leopard it works without problem, what is different

    Try deleting the addressBook database, /Users/username/Library/Application Support/AddressBook/AddressBook-v22.abcddb.
    Address Book automatically creates that file from the metadata.

  • Serious problems with mac snow leopard

    I am having some very serious problems with my Wireless USB internet device (BSNL EVDO AC8799 ZTE make) and Mac. Everytimes it freezes my mac asks me to restart.. works fine on windows 7 installed via boot camp.
    attaching error pic and log:
    here is the error log:
    Interval Since Last Panic Report:  28425 sec
    Panics Since Last Report:          4
    Anonymous UUID:                    F548AB92-4576-4F47-9CA1-60D91BD3FB94
    Sun Jul 10 23:35:44 2011
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f808541f9, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff805f8740e0, CR3: 0x0000000000100000, CR4: 0x0000000000040660
    RAX: 0x0000000009b3ffc5, RBX: 0x0000000000000000, RCX: 0x0000000018000040, RDX: 0x0000000010000000
    RSP: 0xffffff805f873f30, RBP: 0xffffff805f873fa0, RSI: 0x0000000000000000, RDI: 0x0000000000020006
    R8:  0x0000000000000003, R9:  0x0000000000000001, R10: 0x0000000000000007, R11: 0xffffff80004f4ece
    R12: 0x0000000004000000, R13: 0xffffff805f873f20, R14: 0x000000000e000040, R15: 0xffffff800cd43cf0
    RFL: 0x0000000000010246, RIP: 0xffffff7f808541f9, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff805f873bd0 : 0xffffff8000204d15
    0xffffff805f873cd0 : 0xffffff80002d1208
    0xffffff805f873e20 : 0xffffff80002e3f4a
    0xffffff805f873e30 : 0xffffff7f808541f9
    0xffffff805f873fa0 : 0xffffff80002c8527
          Kernel Extensions in backtrace (with dependencies):
             com.apple.iokit.IOSerialFamily(10.0.3)@0xffffff7f80851000->0xffffff7f8085afff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K540
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 7923118028595
    unloaded kexts:
    com.ZTE.driver.ModemDriverMacEx          1.0.6d1 (addr 0xffffff7f8085b000, size 0x28672) - last unloaded 798326091621
    loaded kexts:
    com.ZTE.driver.ModemDriverMacEx          1.0.6d1 - last loaded 7633147910063
    com.regularrateandrhythm.driver.RowmoteIREmu          1.0
    com.parallels.kext.prl_vnic          6.0 11994.637263
    com.parallels.kext.prl_netbridge          6.0 11994.637263
    com.parallels.kext.prl_usb_connect          6.0 11994.637263
    com.parallels.kext.prl_hid_hook          6.0 11994.637263
    com.parallels.kext.prl_hypervisor          6.0 11994.637263
    com.apple.driver.AppleHWSensor          1.9.3d0
    com.apple.filesystems.ntfs          3.4
    com.apple.driver.AGPM          100.12.31
    com.apple.driver.AppleMikeyHIDDriver          1.2.0
    com.apple.driver.AppleHDA          2.0.5f13
    com.apple.driver.AppleMikeyDriver          2.0.5f13
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.driver.AudioAUUC          1.57
    com.apple.driver.SMCMotionSensor          3.0.1d2
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleIntelHDGraphics          6.3.6
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.driver.AppleLPC          1.5.1
    com.apple.driver.AppleBacklight          170.0.46
    com.apple.kext.AppleSMCLMU          1.5.2d10
    com.apple.driver.AppleIntelSNBGraphicsFB          6.3.6
    com.apple.driver.AppleUSBTCButtons          201.6
    com.apple.driver.AppleUSBTCKeyboard          201.6
    com.apple.driver.AppleIRController          303.8
    com.apple.iokit.SCSITaskUserClient          2.6.8
    com.apple.iokit.IOAHCIBlockStorage          1.6.4
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.driver.AirPort.Brcm4331          433.11.5
    com.apple.driver.AppleSDXC          1.0.3
    com.apple.iokit.AppleBCM5701Ethernet          3.0.5b8
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleUSBHub          4.2.4
    com.apple.driver.AppleSmartBatteryManager          160.0.0
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleUSBEHCI          4.2.4
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.12
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.nke.ppp          1.5
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.DspFuncLib          2.0.5f13
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleHDAController          2.0.5f13
    com.apple.iokit.IOHDAFamily          2.0.5f13
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.IOPlatformPluginFamily          4.7.0a1
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.1
    com.apple.iokit.IONDRVSupport          2.2
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.iokit.IOGraphicsFamily          2.2
    com.apple.driver.AppleThunderboltDPOutAdapter          1.3.2
    com.apple.driver.AppleThunderboltDPInAdapter          1.3.2
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.3.2
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.1.6
    com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.driver.AppleUSBMultitouch          207.7
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.driver.AppleUSBMergeNub          4.2.4
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.driver.XsanFilter          402.1
    com.apple.iokit.IOAHCISerialATAPI          1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
    com.apple.driver.AppleThunderboltNHI          1.2.6
    com.apple.iokit.IOThunderboltFamily          1.4.9
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOUSBFamily          4.2.4
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          6
    com.apple.driver.DiskImages          289
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Model: MacBookPro8,1, BootROM MBP81.0047.B0E, 2 processors, Intel Core i7, 2.7 GHz, 4 GB, SMC 1.68f96
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Serial ATA Device: Hitachi HTS545050B9A302, 465.76 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x8509, 0xfa200000 / 3
    USB Device: Hub, 0x0424  (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0245, 0xfa120000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x821a, 0xfa113000 / 7
    USB Device: Hub, 0x0424  (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd110000 / 3

    t33n-iv wrote:
    i am facing problem only when i have internet working on this device. no other user using this device and snow leopard are facing same problem. just because of freezing i have to use stupid windows on my new macbook pro!
    ur reply was helpful, but how should i rectify this problem?
    Have you looked at the manufacturer's website to see if there is an updated driver for it?
    If that doesn't work, I do not know which of the KP troubleshooting steps might resolve the issue. In your place, I would try each one.

  • On start up my Mac Book Pro shows a white screen with a spinning wheel. I have tried starting up with the Snow Leopard disk - all I get is a blue screen. I guess that this is a major repair job??????

    On start up my Mac Book Pro shows a white screen with a spinning wheel. I have tried starting up with the Snow Leopard disk - all I get is a blue screen. I guess that this is a major repair job??????

    If you have the exact same problem - take the computer to an Apple store or an AASP.  Whichever is more convenient for you.  If you have AppleCare call them!

  • Firefox clogs my CPU with all cores on my Mac Snow Leopard 10.6.4

    I usually browse the web heavily as I open around 300 tabs sometimes. However, with the recent update of Firefox, I have 3.6.8 running on my latest Mac Snow Leopard 10.6.4; soon after I open my browser it becomes deadly slow after a while. The activity monitor shows Firefox eating up all cycles on all cores. I noticed that this happens after I open a site with flash or an applet in it, but not sure though. It also crashes.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Is there a "password corral" App provided with the Mac/Snow Leopard?

    Is there a "password corral" App provided with the Mac/Snow Leopard?
    Someplace to keep all manner of passwords one accumulates?

    Keychain does an okay job of it.
    But I much prefer 1Password. It costs $39. There's a promotion on at MacUpdate right now, where you can get it bundled with Parallels Desktop, Tech Tool Pro, and seven other decent apps for only $50, instead of the $367 all the apps would cost if bought individually.

  • I have a mac book pro with ocx snow leopard I wont upgrade to what?

    I have a mac book pro with osx snow leopard I wont upgrade to what?

    OS X Mountain Lion system requirements
    To install Mountain Lion, you need one of these Macs:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory
    8 GB or more of available space

  • Upgrade leopard to snow leopard with preexisiting snow leopard time machine backup

    I was using an old desktop Mac that had been upgraded to snow leopard from leopard a few years ago. Disk utility said I needed to repair my hard drive using the installation discs. I didn't have the snow leopard installation disc but still had the leopard installation disc which I used. When the computer re-installed leopard onto my hard drive, it created a partition: one with my hard drive running snow leopard, and then a new one with the space left over, running leopard. I got my replacement snow leopard installation discs and would like to delete the leopard partition, and go back to what I had before with the snow leopard drive. I do have a time machine backup (somewhat incomplete) and am making a copy of the physical snow leopard drive. I cannot access the most recent time machine backup since I'm back to running leopard and the time machine backup was made under snow leopard. I'm not sure how to proceed from here to upgrade to snow leopard. When I try to upgrade to snow leopard, I'm asked which destination drive to use. I don't want to use the snow leopard drive, since it would get deleted. So, would the leopard drive be the answer in this case? And what would happen to the contents of my old snow leopard drive? Would I end up with two partitions, both with snow leopard, but one being current (nothing on it) and the other being my old drive? Would I be able to get rid of the current drive and then use only my old drive? Thanks in advance for any help.

    First of all, it's unclear to me why you cannot select the old Snow Leopard partition.
    I also think you should have been able to repair hard disk using the leopard CD disk without actually installing leopard OSX by using the Utilities only.
    Also, Why is your Time Machine backup incomplete? Is that under Leopard or Snow Leopard?
    Now you have two partitions with two different OSX (Leopard and Snow Leopard). Your goal is to get back to Snow Leopard.
    I going to assume that the original Snow Leopard partition is inoperable (this is also question?) I would upgrade the Leopard partition to Snow Leopard. Afetrwards, use the Migration Assistant to bring in your data, documents, app, and settings. Once complete, you should be able to see your Time Machine backups. If all is ok then you can delete the original Snow Leopard partition.
    This is a somewhat complicated situation, so I am issuing a caveat that is my opinion only. Wait until another expert provides input regarding your situation to determine the best course of action.

  • 1st Mac (Snow Leopard)...not sure how to back up

    Just got my first Mac (iMac) with Snow Leopard; purchased from a friend who upgraded systems. I am EXCITED and want to upgrade to Mountain Lion but worried on doing something wrong; still learning the ropes if you know what I mean. I have an external (Lacie Rugged), and have tried the TM feature to backup. It backed-up without issues but this was several weeks ago. Since, Mountain Lion has released and I want it! So, I think I need to back-up the HD again because in these last several weeks I have been learning and tweaking the iMac to my personal setting and needs. It is slightly different from the original back-up. I do have all disc's in case something happens but I am trying to avoid a reformat. I will however if I absolutely have to.
    My questions are:
    1) will backing-up the system again over-write the previous backup file on the Lacie external? . . . or simply create a who;e new file in which I can then delete the first one?
    2) will I need to delete the previous back-up file first (on the Lacie) and proceed with a new (second) back-up?
    3) if the back-up is done with the Snow Leopard OS X, will it reinstall on the system should an issue occur if upgraded with the newly released Mountain Lion?
    4) will reformat be a best option to simply start fresh?
    The system runs flawless but has my friends name on the home (house icon) account. I am aware that to change this name, I think I need to create a new account. I am not sure however exactly how to do this or if I can delete his after I do; remember...1st Mac. (still learning). I did manage to change the name of the computer to mine. 
    5) do files need to be transferred from his old (name; house icon) account to my newly created account in order to avoid issues if I do create this new account? if so, which specific files or all of them?
    Ideally, I would like ONLY my info on this system but it's not a major concern for me since I know who I bought it from and that all previous owner settings were wiped clean: well almost.  I have read about prepping the system for the ML upgrade and verified and repaired the disk so that is done. I just need to make sure that a back-up is done correctly and if something should go wrong...I can get all the files back up and running even with the newly upgraded Mountain Lion OS X. I hope I am making sense here.
    Anyway, I thought someone could give me a step by step break down on what exactly I need to do to get this done? ... and about the new account creation and how this exactly is done the RIGHT way.
    Thanks

    Well first you need to check to make sure your Mac meets the 10.8 specifications.
    https://en.wikipedia.org/wiki/OS_X_Mountain_Lion
    If you don't knwo what your Mac is, use the free MacTracker and then the Apple Menu > About this Mac > More informationa nd look for a model number like MacBook Pro 3,1 and use MacTracker search feature.
    Next your going to have to make a copy of your existing data to a external storage drive, not TimeMachine which you currently have.
    Most commonly used backup methods
    When you upgrade to 10.8, your going to have a different machine anyway, so your going to be setting it up all over again. It doesn't make too much sense to restore from TM for just a few files as it takes a long time and copies over stuff from the previous owner. So it's faster and safer to just import your files manually when 10.8 is installed.
    If your Mac will run 10.8, you have to realize that likely software you currently have (and is not yours) will no longer work or be there after this proceedure, it's to make sure it's all you and not someone elses.
    First follow this method to erase and install 10.6 again, it's so you start clean and there are no conflicts/problems or issues  as your AppleID is used to download 10.8 and any app store software is copy protected.
    This way your updating 10.6.8 (Software Updated) to 10.8 on a "Fresh install" which is better than trying a upgrade.
    How to erase and install Snow Leopard 10.6
    Make sure your iLife package is installed (look for iPhoto and if there it is) just use the bunded app installer if you have the grey/black 10.6 disks. White 10.6.3 disks don't have iLife, so you'll be buying it from the AppStore again later with your AppleID so you can get updates for it.
    Next log into App Store and download 10.8 and upgrade, you do need a fast, reliable internet connection as it's large download.

  • How to set adobe acrobat 9 pro as pdf default program on mac snow leopard OS?

    how to set adobe acrobat 9 pro as pdf default program on mac snow leopard OS?

    I say to highlight more than one if you can because if the PDF you highlight was made by using Acrobat, it will change all PDF's made by Acrobat but if you have one made by some other product, it may not change them to open with Acrobat.
    So in other words, at some point you may have to do it to a PDF made by some other product.

  • Printing from InDesign CS4 on Mac Snow Leopard to HP officejet pro K5400

    I recently started using a Mac Snow Leopard with InDesign CS4; for awhile it printed fine. Then, dealing with a book mss, I had to get InDesign to convert the document to a PDF, and since that time, the Officejet Pro k5400 will only print in what appears to be the best quality, even when I tell it to print in fast draft, and even set that as a preset. Anybody had that problem? Anybody have any suggestions as to what is going on here? How can I get the printer to print in fast draft? Thanks for any help,
    Knob Man

    Hi kajuntwin,
    I understand that you are having and issue after updating your desktop. I am referring you to this post by MBJustice who is currently working with other customers on this issue.
    I hope this helps,
    Thank you.
    I worked on behalf of HP.

  • Why doesn't LightScribe work with my Snow Leopard?

    Why doesn't LightScribe work with my Snow Leopard? It downloaded and is in my printer folder, but won't open.

    Are you really still running 10.6.3? If you are you should run the combo update as many issues were resolved within the updates themselves.
    Mac OS X 10.6.8 Update Combo v1.1

  • What is best password AP to sync with Imac (Snow Leopard)?

    What is best password AP to sync with Imac (Snow Leopard)?

    Here are a few analog to digital devices and approaches I have had success with:
    1. Sony DA-2
    2. Most Name brand Firerwire or i.Link Minidv Camcorders with Digital Pass thru feature will suffice since more often than not this feature is also included ... But read the owner's manual or check online to make certain it's included.
    3. Canopus products work perfectly nearly 100% of the time and will keep the video and audio in synch much better than other devices. It can take the form of a pci card (if your mac is so equipped) and if not, then a canopus media converter box will also work (as already mentioned above):
    click here:
    4. Another approach I use to simply "dump" mini dv or VHS tapes to Dvd-R is a DVD Player/Recorder like the one shown below with Digital inputs. In this case (i.Link / FW)):
    click here
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

  • My mac snow leopard 10.6.8 can not find my 3050a printer wireless

    My mac snow leopard 10.6.8 can not find my 3050a printer even though i have added the printer bonjour to my print list, even though the blue and white light s are on on the printer panel.
    I have good signal strength
    the printer ip is 192.168.1.8
    Help

    OK, using these instructions: https://www.broadbandadvice.org.uk/Website/Routers/HG532.htm  change the channel to 11.
    Now, if and when the printer is connected with a vaild IP address, let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • Is there a way to get the correct order from the dependent types of a sche

    Hi , I have a CT facing the following problem: When trying to built a SQL script to create all the object types within a schema using the DBMS_METADATA packages. Did insert in a table the names of the types that will be exported following a concrete

  • "PDServerServiceServlethttp" failed to preload on startup

    Hi, I am getting following error while starting weblogic server: Servlet: "PDServerServiceServlethttp" failed to preload on startup in Web application: "pd-server.war". javax.xml.ws.WebServiceException: The WLS server is disabling the TwoWaySSL while

  • Import from catalog: what happens to this catalog ?

    Hello everyone! I follow Scott Kelbys LR3 book for transferring my work from my studio laptop to my main processing computer in my office using the EXPORT TO CATALOG technique. So then I transfer the folder to where I keep my LR pictures in MY  COMPU

  • GL Date for PO Approval

    Hi All, When a PO is created on 28th March and submitted for approval. The PO has not been approved till 3rd of April but in the mean time the GL period is closed for 31st March. If the Approver approves the PO on 3rd March will it be approved or not

  • XML to XSL

    I am strugling to output my xml document in an xsl format. My xml document is created in a function, and I have another function that takes the xml and transform it to an xsl document... something is wrong somewhere the output to xsl is not happening