Palm IIIc won't start up

I have an older Palm IIIc that has worked beautifully for many years. The battery still holds a charge. Then suddenly I press the power button and it will not boot up. I have recharged the battery and checked connections. Finally tried a reset but still nothing. Any suggestions greatly appreciated.
Post relates to: Palm IIIc

Hello tinaolea and welcome to the Palm forums.
Your Treo is stuck in a reset loop. To break out of it, you will need to hard reset your Treo. To learn how to reset your Treo, please read this Palm KB article. To reload your data and applications on your Treo after the hard reset is performed, simply sync your Treo to your computer and select your existing HotSync ID.
Alan G

Similar Messages

Palm Desktop won't start

I have a TX, on Windows Vista. Just downloaded the Palm Desktop by Access 6.2.
But, the Palm Desktop won't start after I enter my password. Says: "Palm Desktop by ACCESS Application has stopped working."
Please help!Pretty please!
Post relates to: Palm TX
Message Edited by onthehill on 02-05-2008 11:22 AM
Message Edited by onthehill on 02-06-2008 03:30 PM

Has this ever been resolved? It looks like it's 5 months old and I don't see any replies. I saw this and immediately thought of the DEP(Data Execution Protection) feature that is a characteristic of Windows Vista. If you go to your control panel,to system, to advanced system settings, and then click the settings button in the performance section, the DEP is the third thumnail to the right(should be the last one there). This is where you can turn it on or off and add programs for it to ignore.
However, usually when it's the DEP that kills a program unexpectedly, the operating system has usually made it known to the user that it was the DEP.
Post relates to: Palm TX

PALM TX WON'T START.

Hello All.
After my last HotSync my Palm TX appears to have lost all of its information and now continually tires to start up but with no success. It powers up and then shuts off only to start the process over again.
I have tried resetting both soft and hard with no success. I also had the battery checked by a technician and it is up to scratch.
Any assistance would be greatly appreciated.
Thanks.
Post relates to: Palm TX

Ok, If you did not get the erase all data message for the hard reset, then you are not doing the hard reset properly. Look at the link regarding reset procedures and follow the procedure for the hard reset. This should get the device back to factory condition and stop any looping. The hard reset will erase all data from the TX. Do you have a backup of your data?
Are you sync'ing with a username that was associated with a different Palm device?
It sounds like you are sync'ing over something that is not compatible to the TX from the backup folder on your PC. The backup folder contains the settings and 3rd party apps. from any other model of Palm device. These settings can cause looping or inconsistent operation due to the differences in the devices.
Looks like you may need to hard reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Next before you hotsync your data back over you will need to rename your backup folder, to do that go here;
XP
C:\program files\palm or palm one\[hotsync username]\ and rename your backup
folder to backup.old
Vista
Start-->documents\Palm OS Desktop\[hotsync username]\ and rename your backup
folder to backup.old
Then hotsync to your current hotsync name and all your contacts, calendar,
tasks, and memos will come back over.
Show file extensions for XP or Vista
XP
If you can not view file extensions on your PC I would like you to open a
folder go to Tools-->Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Vista
Open control Panel go to Folder Options--> View (tab) and under show hidden
files and folders uncheck hide file extensions for known file types.
Post relates to: Palm i705

Palm Treo755 won't start up!

My Treo's screen reads "access powered" then to "Palm" then blinks to "access powered" again. Can't get the software up. Tried to connect with USB to comp, but the computer will not connect to the palm. Any ideas?
Post relates to: Treo 755p (Verizon)

Hello tinaolea and welcome to the Palm forums.
Your Treo is stuck in a reset loop. To break out of it, you will need to hard reset your Treo. To learn how to reset your Treo, please read this Palm KB article. To reload your data and applications on your Treo after the hard reset is performed, simply sync your Treo to your computer and select your existing HotSync ID.
Alan G

Trying to sync Palm IIIc with Powerbook

I have been trying to sync a Palm IIIc with my Powerbook which is currently running Tiger (I cannot run OS 9 at all).
I bought the IIIc on eBay and it works flawlessly except for the fact that it won't sync. I can click on the hotsync square on the screen of the IIIc and get two options :
1. Direct Serial
or
2. IR (Infrared) to PC/Handheld.
It came with a cable that has the docking connection on one and and a dual splitter on the other - one lead has the serial (female) end and the other is a USB connector. I am able to charge it on the PB using the USB but likely only because it is a powered USB port.
I have tried two different serial to USB adapters and so far, the Powerbook still is not seeing the IIIc.
A friend is giving me a cradle from his old IIIe but it has a serial connection. I expect I will have the same problem with this cradle.
Does anybody have any suggestions ?
Is there an adapter that can be used with OS X/Tiger ?
I have installed Palm Desktop 4.2.1 and have iSync.
Keiyana

I have been trying to sync a Palm IIIc with my
Powerbook which is currently running Tiger (I cannot
run OS 9 at all).
I bought the IIIc on eBay and it works flawlessly
except for the fact that it won't sync. I can click
on the hotsync square on the screen of the IIIc and
get two options :
1. Direct Serial
or
2. IR (Infrared) to PC/Handheld.
It came with a cable that has the docking connection
on one and and a dual splitter on the other - one
lead has the serial (female) end and the other is a
USB connector. I am able to charge it on the PB
using the USB but likely only because it is a powered
USB port.
I have tried two different serial to USB adapters and
so far, the Powerbook still is not seeing the IIIc.
A friend is giving me a cradle from his old IIIe but
it has a serial connection. I expect I will have the
same problem with this cradle.
Does anybody have any suggestions ?
Is there an adapter that can be used with OS X/Tiger
I have installed Palm Desktop 4.2.1 and have iSync.
Keiyana
Hi,
I have the same problem with my IIIc and powerbook G4 (no syncing with isync).I went ahead and bought the keyspan serial adaptor and still can't get the palm to sync. I also have desktop 4.2.1, running Tiger. I can get the palm to Hotsync with a PC via the standard serial port as well as the Keyspan serial adaptor to usb.

Palm IIIc - is there any validity left?

I'm trying to resurrect this old model and make it work for my current purposes, though I'm having more than some trouble getting it to do what I want.
Basically, I'm just curious if anyone knows of any solutions to these problems:
1. I need a note-taking program - something better than memopad - that I can type notes into, draw the occasional doodle (schematic drawings for schoolwork), and finally has the ability to transfer everything back to XP in a format I can edit/print. Is there such a piece of software out there? Can a guy still get it?
2. If such a piece of software exists, it likely won't work on OS 3.5.3, and while I've been searching for a way to legally upgrade to 4.1, I've been running into wall after wall. Is there a way I can get my hands on this OS? Am I actually on the right track in believing that this OS will work on the Palm IIIc?
If I can make this good old IIIc work for me, that will make me the happiest Electronics Engineering student out there. If I have to upgrade, I guess I have to upgrade, but I'm willing to give this IIIc a chance - it'll surely be less expensive to make it do what I want to do then to buy a new one, plus a keyboard, extras... etc...
Thanks for reading the long post guys - I hope some of you can help!
Post relates to: Palm IIIc

I'm not very familiar with the IIIc but have you checked out Diddlebug? It supports 3.5 and is free.
http://diddlebug.sourceforge.net/
As for a better memo pad (I know you didn't ask but I thought I'd suggest it as well), check out PSMemo, which supports 3.5 as well.
http://jove21.com/palm/palmware/psmemo/
As for converting or transferring the file over to XP, you are really stretching it. The best I've found and use is Suntzu's MemoManager. Not sure if it will support 3.5 (doubt it, but it's worth a try).
You may want to get a screen capture program to capture the screen of your device and then transfer the image over. There's Screenshot Hack (not free)
http://linkesoft.com/screenshot/manual.html
Wow. Took me a while to rack my brain thinking of what to suggest. Hope it helps
Post relates to: Treo 650 (Rogers)

Tungsten T3 won't start up

After charging T3 won't start back up.
Post relates to: Tungsten T3

Hello gideon2, Welcome to the Palm Support Commnunity.
The first step in troubleshooting a Palm OS device is a Soft Reset. Have you tried this yet?
You haven't given us much information to work with... Was the device working correctly before? Has the battery been declining to hold a charge? With the age of the T3, I'd guess your battery is about to fail.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

SAP won't start after recabeling sap system

Hi, 
 
I have recently recabled my sap system (from wireless to wired) and now my sap instance won't start anymore. The weird thing is that nothing major was changed. When i read the logs from the work directory it seems it cannot load dbsdbslib.dll. I have updated to the latest version of the kernel and maxdb (kernel=7.00 patch 221, maxdb=7.6.06.07) and i made very sure i got the right kernel (NT AMD64). I also checked the environment settings for the <sid>adm user. The weird part is that it seems SAP cannot connect to the database, but the databse starts just fine and r3trans -d also returns no errors. Does anyone have an idea what could be wrong? 
 
Kind regards, 
Bas 
 
 
trc file: "dev_disp", trc level: 2, release: "700" 
 
 
command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE 
command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap 
 
ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll") 
Error 126 = "The specified module could not be found." [dlnt.c 255] 
sysno 00 
sid IDE 
systemid 562 (PC with Windows NT) 
relno 7000 
patchlevel 0 
patchno 221 
intno 20050900 
make: multithreaded, Unicode, 64 bit, optimized 
pid 3252 
 
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC) 
length of sys_adm_ext is 576 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3252) [dpxxdisp.c 1287] 
ShmProtect( 5, 3 ) 
SigIInit: ok (whoami=1) 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 11 installed (SigISegv) 
Pipe created:
.\pipe\SAP3252 
SigIInit: Create Message Thread 
SigIRegisterExitRoutine: exithandler installed (DpHalt) 
SigIRegisterTerminateRoutine: terminatehandler installed (DpHalt) 
 shared lib "dw_xml.dll" version 221 successfully loaded 
 shared lib "dw_xtc.dll" version 221 successfully loaded 
 shared lib "dw_stl.dll" version 221 successfully loaded 
 shared lib "dw_gui.dll" version 221 successfully loaded 
 shared lib "dw_mdm.dll" version 221 successfully loaded 
dp_loc_queue_max_blk: 40000 
mshost: >sap< 
DpSetCancelStrat: set timeout 0 at level 0 
DpSetCancelStrat: set timeout 5 at level 1 
DpSetCancelStrat: set timeout -1 at level 2 
DpSetCancelStrat: set timeout -1 at level 3 
rdisp/softcancel_sequence : -> 0,5,-1 
softcancel_sequence: >0,5,-1< 
use internal message server connection to port 3900 
msserv: >3900< 
dp_bufreftime: 120 sec 
dp_btctime: 60 sec 
dp_autoabaptime: 300 sec 
dp_autothtime: 60 sec 
dp_autojavatime: 300 sec 
dp_vm_alarm_time: 100 msec 
dp_calldelayed_time: 60 sec 
dp_startup_time: 20 
dp_noptime: 0 sec 
dp_keepalive: 1200 sec 
dp_keepalive_timeout: 60 sec 
dp_ms_keepalive: 60 sec 
dp_ms_keepalive_timeout: 300 sec 
switch off dp-keep-alive for old temus 
dp_gui_auto_logout: 0 sec 
dp_spoolalrm: 60 sec 
dp_softcancel_timeout: 5 sec 
rdisp/wp_restart_interval : 300 sec 
DpISetTrcLog: trc logging active, max size = 20971520 bytes 
dp_rfc_check_active: 1 
dp_rfc_check_all_rfcs: 0 
dp_http_check: 1 
check_master_slave: 0 
NiHsLGetServNo: got service name 'sapdp00' from operating system 
NiIGetServNo: servicename 'sapdp00' = port 0C.80/3200 
NiHsLGetServNo: got service name 'sapgw00' from operating system 
NiIGetServNo: servicename 'sapgw00' = port 0C.E4/3300 
NiIMyHostName: hostname = 'sap' 
NiHsLGetNodeAddr: got hostname 'sap' from operating system 
NiIGetNodeAddr: hostname 'sap' = addr 192.168.2.250 
NiHsLGetHostName: found address 192.168.2.250 in cache 
NiIGetHostName: addr 192.168.2.250 = hostname 'sap' (fq) 
Mon Oct 26 16:14:29 2009 
NiHsLGetNodeAddr: hostname 'www.doesnotexist0190.qqq.nxst' not found by operating system 
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0190.qqq.nxst) took 12 seconds 
Mon Oct 26 16:14:45 2009 
NiHsLGetHostName: address 1.0.0.1 not found by operating system 
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds 
NiHsLGetServNo: got service name 'http' from operating system 
NiIGetServNo: servicename 'http' = port 00.50/0080 
NiHsLGetServName: port 1F.90/8080 not found by operating system 
NiHsLGetServName: port FC.2B/64555 not found by operating system 
NiHsLGetServNo: service name 'sapdp9988' not found by operating system 
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521] 
SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff) 
SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff) 
SigIRegisterRoutine: alarm handler installed (DpSigAlrm) 
SigIRegisterRoutine: handler for signal 2 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 15 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit) 
MtxInit: 30000 0 0 
DpInitMtx: MtxInit o.k. 
PPID environment not found 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp) 
 
 
trc file: "dev_w0", trc level: 2, release: "700" 
 
* 
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ
M
M command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE
M command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap
M command line arg 2: wp_id=0
M
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c 255]
B *** ERROR => Couldn't load library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll'
[dbcon.c 4905]
M sysno 00
M sid IDE
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 221
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4000
M
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4000) [dpxxdisp.c 1349]
M Mon Oct 26 16:14:47 2009
M SigIInit: ok (whoami=2)
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 11 installed (SigISegv)
M Pipe created:
.\pipe\SAP4000
M SigIInit: Create Message Thread
M SigIRegisterExitRoutine: exithandler installed (wp_halt)
M SigIRegisterTerminateRoutine: terminatehandler installed (wp_halt)
M SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)
M SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)
M SigIRegisterRoutine: alarm handler installed (DpSigAlrm)
M SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)
I MtxInit: 30000 0 0
M DpInitMtx: MtxInit o.k.
M WaitParent Thread 3252 start
M WaitParent Thread 3252 created
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)
 
 
trc file: "trans.log" 
 
 
4 ETW000 r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 21.10.2009 - 15:06:04
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 21 15:06:06 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 0000000188C00000
4 ETW000 7580 0.007580
4 ETW000 [dev trc ,00000] using "D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll" 16 0.007596
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 19 0.007615
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll 38 0.007653
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.211) 307 0.007960
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll 26 0.007986
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll 24 0.008010
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 46 0.008056
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000) 21 0.008077
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008092
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000003B4F920) 20 0.008112
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008127
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.008144
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.008194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000001A01768) 31 0.008225
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.008242
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 13 0.008255
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 16 0.008271
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

Edited by: B. v. d. Lienden on Oct 26, 2009 5:18 PM

<div class=Section1>
Natalia,
 
To answer your questions:
1. Did you create the SAP ticket, where this problem is
reported?
I didn't report it to SAP because it is just an IDES test
system. I can easily do a reinstall, but i would like to know the cause and
solution to this problem.
 
2. Do you have dbsdbslib.dll at this location? What version?
Yes, i have the dbsdbslib.dll at location
D:\usr\sap\IDE\DVEBMGS00\exe and also D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
Version is 7000.221.16.41497 (kernel 7.00 SP 221)
 
your requested output:
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update level u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A00
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\ideadm\Application Data
CLIENTNAME=BSF02
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=SAP
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=ada
DIR_LIBRARY=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
DIR_PROFILE=D:\usr\sap\IDE\SYS\profile
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\ideadm
JAVA_HOME=C:\j2sdk1.4.2_21-x64
LOGONSERVER=
SAP
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\j2sdk1.4.2_21-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Intel\DMIX;D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 13,
GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SAPEXE=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
SAPLOCALHOST=sap
SAPSYSTEMNAME=IDE
SESSIONNAME=RDP-Tcp#47
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\2
TMP=C:\WINDOWS\TEMP\2
USERDOMAIN=SAP
USERNAME=ideadm
USERPROFILE=C:\Documents and Settings\ideadm
windir=C:\WINDOWS
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update levelu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
 
 
</div>

My iPhone 5 won't start!

My Iphone 5 won't start and tells me to connect the phone to ITunes but nothing happens when I do. The phone doesn´t show up in ITunes. What to do?

Apologies, 11.0.4 is the most recent of course...
You'll need to enter DFU mode.
Connect the iPhone to your computer and launch iTunes
Turn the iPhone off (hold down the power button at the top of the iPhone)
Hold down the sleep/power button and home button together for exactly 10 seconds, then release the power button
Continue to hold down the Home button until a message appears in iTunes telling you an iPhone in recover mode has been detected
Hopefully this should work, with you being able to restore the device in iTunes.
However, be warned that this will erase all content on the iPhone, content you can restore if you have saved backups on your Mac/PC or on iCloud.

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

All of a sudden Photoshop won't start [on a Macbook Air]

Dear all,
I'm on a MacBook Air with OS X 10.10.2, and I use Photoshop about once a month, but now I really need it, and it won't start:
- Immediately after I click on the Photoshop icon I get "Adobe Photoshop CS5.1 cannot be opened because of a problem." And when I click on the "Report..." button I get a very technical message (see below).
- I've used Photoshop on this machine for about a year with no problem, but recently I had a problem and needed to restore from my TimeMachine backup.
- I don't know if the problem occurred immediately after the restore or not.
- I've read innumerable threads on various forums, but nothing describes my problem exactly. I suspect a problem with my paths and permissions (since I read a report that restoring from a TimeMachine causes such problems occasionally), but I don't know which path is corrupted/missing/unreadable.
- I've tried creating a new admin account and starting Photoshop from there. It didn't work.
- I don't mind reinstalling, but I don't have an installer image. I started with Photoshop 6, then updated to CS2, CS4 and eventually CS5. I do have all the serial numbers but not all update-images.
I would appreciate any hints on how to further diagnose and some the problem.
Thanks a lot in advance!
Bojidar
And now here is my exact error message:
Process: Adobe Photoshop CS5.1 [12426]
Path: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Identifier: com.adobe.Photoshop
Version: ???
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: Adobe Photoshop CS5.1 [12426]
User ID: 501
Date/Time: 2015-05-03 21:53:39.840 +0200
OS Version: Mac OS X 10.10.1 (14B25)
Report Version: 11
Anonymous UUID: A0DC6EA7-1973-1B68-EFC7-5D60106F084D
Sleep/Wake UUID: 1FA6367C-EEB2-4F46-8773-EBB176EAEAC7
Time Awake Since Boot: 230000 seconds
Time Since Wake: 2900 seconds
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/adobe_caps.framework/Versions/A/adobe_caps
Referenced from: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Reason: image not found
Binary Images:
 0x7fff6f1c1000 - 0x7fff6f1f7837 dyld (353.2.1) <4696A982-1500-34EC-9777-1EF7A03E2659> /usr/lib/dyld
Model: MacBookAir6,2, BootROM MBA61.0099.B18, 2 processors, Intel Core i5, 1.3 GHz, 4 GB, SMC 2.13f15
Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0256F, 251 GB
USB Device: Internal Memory Card Reader
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Air, Apple Inc., 23.6

Did tou try resetting the preferences usins the Photoshop keys as your tryind to start Photoshop. Toy cab also use Windows explored or Mac finder deleteor rename you userid Photoshop preferende if you change you OS preferences to be able to see hiddeb files and folders. Do you read the link I posted?
Restore preference files to default
In this video, learn the two methods of resetting your preference files back to default: Manual preference file removal and Keyboard Shortcut method (starts at 5:05)
by Julieanne Kost
To restore preferences quickly using a keyboard short cut:
Press and hold Alt+Control+Shift (Windows) or Option+Command+Shift (Mac OS) as you start Photoshop. You are prompted to delete the current settings. The new preferences files are created the next time you start Photoshop.
Note: Using the keyboard shortcut, preference files for custom shortcuts, workspaces, and color setings will also be reset to default.

X11 won't start anymore!

Hello,
this is a desperate call: I am at a conference with my MBP, (10.6.7, all updates done). I need Matlab for my presentation, which needs X11.
X11 (and XQuartz) decided that they won't start anymore: the icon bounces in the dock for a while, then sits there without the little light underneath, and X11 is "non responding".
The logs show something like this.
I have googled and searched: similar problems once in a while appear but no posted solution.
I tried:
1) reinstalling XQuartz (I would reinstall X11, but how? I do not have the disks with me, I am away!)
2) from an admin account
3) create a new account.
4) repair permissions.
5) reinstall the font update from Apple that was recently issued.
HELP PLEASE!!!
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: DISPLAY ("/tmp/launch-bHvQen/org.macosforge.xquartz:0") does not match our id ("org.x"), unsetting.
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: main(): argc=2
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -psn_0_278596
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Waiting for startup parameters via Mach IPC.
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Could not connect to server (DISPLAY is not set). Starting X server.
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     X11.app: Launching /usr/X11/bin/startx:
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[0] = /bin/sh
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[1] = -c
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]      argv[2] = /usr/X11/bin/startx
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Scanning user font directories to generate X11 font caches
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Updating FC cache
11-05-16 5:02:01 PM     org.x.privileged_startx[20781]     font_cache: Scanning system font directories to generate X11 font caches
11-05-16 5:02:01 PM     defaults[20791]
The domain/default pair of (org.x.X11, dpi) does not exist
11-05-16 5:02:01 PM     [0x0-0x44044].org.x.X11[20759]     Couldn't create cookie
11-05-16 5:02:02 PM     org.x.privileged_startx[20781]     font_cache: Updating FC cache
11-05-16 5:02:04 PM     [0x0-0x44044].org.x.X11[20759]     font_cache: Done
11-05-16 5:02:04 PM     org.x.privileged_startx[20781]     font_cache: Done

Here is the solution: there was nothing wrong with x11 per se!
The problem was that about 30 files in /usr/bin (like gzip, egrep, hexdump etc) had been hosed (they had 0 file size). The puzzling messages was due to the fact that startx uses hexdump, which was simply silently doing nothing (since it had 0 size!).
I do not know what or when these files were zeroed: I suspect a recent OSX update which did not complete and I had to forcefully reboot.
I have fixed it enough to work (copying those files from another mac), but who knows what else lurks beneath the surface of apparent serenity!
I am actually surprised that the whole system did not stop functioning completely.
MORALE: if something looks strange in the logs with x11 or other apps, check the file sizes in your /usr/bin, you may be surprised too!

24" iMac won't start when iPod is connected

My 24" iMac won't start up/restart if my iPod is already connected to it. If I restart with the iPod connected, I just get a gray screen (with no apple logo) forever. Has anyone else experienced this problem? If so, any solution? I have Windows installed with boot camp, don't know if that's the problem, but I tried reseting the p-ram, but to no avail...
Intel iMac 24", 7600 GT, 500GB, 2GB. Titanium Powerbook 667 MHz G4, loaded. Mac OS X (10.4.7) 30 GB iPod Video

My suggestion would be disconnect the iPod. That's just me though.
http://docs.info.apple.com/article.html?artnum=93953
I'm guessing Boot Camp is the culprit. Whatever emulated BIOS it's using doesn't like the iPod as a startup disk.

I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

I deleted my extensions manager and now my Mac won't start up. Please Help!!

I have an IMac, 24" model, running OS X. For the past several days, little warning windows have been popping up with this annoying beep, telling me that my computer was infected with various viruses. 4, to be exact. Also, while on the internet, random pop-up windows have appeared, so I thought I did have a virus. So, to correct the matter (or attempt to), I deleted my preferences folder from the system folder, as well as the extensions manager.
Now, the computer won't start up past the white logo screen with the turning gear thingy. I've tried resetting the PRAM, and starting in safe mode, and safe mode with the progress screen, and even something there while holding the option key (that one gave me an icon of my HD, but clicking on it took me back to an endless wait on the white screen). I've tried starting from the disk that came with the computer (I held the C key) but not only doesn't the computer start from the disk, it spits the disk out. I don't understand. The computer was fine until I deleted the ext. mgr and preferences, so it can't be that the computer went bad or something.
I don't know what else to do here. I do have an extended service warranty with Best Buy, but I wanted to see if there was some way to fix this before hauling this thing off to the store. Any suggestions? I'm desperate here, because anything and everything I've tried (based on all the try-this and try-thats I found on the internet), nothing has worked.
Please help.
Thanks in advance.

Well done! You've succeeded in turning your Mac into a useless brick.
Deleting the System/Library/extensions folder and the associated manager removed most of the functionality from your OS.
And all to get rid of what sounds like the MacDefender trojan or a variant.
ref; http://support.apple.com/kb/HT4650 and http://support.apple.com/kb/HT4651
You may have a slim chance of recovering if it will still boot in Target Disc Mode; in which case you can use another Mac to install the system remotely.
And I doubt your warranty with Best Buy is going to cover user "error."
Message was edited by: noondaywitch

Palm IIIc won't start up

Similar Messages

Maybe you are looking for