Palm IIIe does not link to computer

The hotsync setup will not give me the option of USB, only com3 or com4. I have the 4.1.4 desktop.
Post relates to: Palm IIIe
This question was solved.
View Solution.

I got it to work when I plugged it into a USB card on com5 then set the sync manager for serial on com5. Go figure. Thanks.
Post relates to: Palm IIIe

Similar Messages

The iPad does not ship unless he closed ITunes does not recognize or computer If he shipped fully closed device I bought a charger and bought Link and the same problem persists IPad without Jelbrak

The iPad does not ship unless he closed
ITunes does not recognize or computer
If he shipped fully closed device
I bought a charger and bought Link and the same problem persists
IPad without Jelbrak

What do you mean 'does not ship unless he closed' ? What are you trying to do with your iPad, and what happens when you do it ?
If your computer's iTunes isn't recognising the iPad then do you have the latest version of iTunes installed on your computer ?
device not showing in iTunes on a PC : http://support.apple.com/kb/TS1538
on a Mac : http://support.apple.com/kb/TS1591

My ipod wont connect to itunes, i have re-installed itunes ...reset my ipod...re-boot my computer...basically i've done eveything i could but no joy it even shows on my computer but simply does not link in to my itunes. Please HELP !!!

my ipod wont connect to itunes, i have re-installed itunes ...reset my ipod...re-boot my computer...basically i've done eveything i could but no joy it even shows on my computer but simply does not link in to my itunes. Please HELP !!!

If you're unable to do the Restore, go into Recovery Mode per the instructions here.

I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5

I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3. I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have. I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version. What should I do

I have 6.0. Tried to download newest verion and it will not download. Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
Thanks, John
m: gener7
Sent: Thursday, December 11, 2014 6:01 PM
To: JOHN STAHLY
Subject: I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is 2010and does not read my camera, I went out and downloaded the new one and it does not link to adobe photoshop cs5
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

Under bookmarks the Organize bookmark option does not appear, new computer Firefox 4.0, and Windows 7, how to make it appear, thanks

Under bookmarks the Organize bookmark option does not appear, new computer Firefox 4.0, and Windows 7, how to make it appear, thanks

"Organize Bookmarks" has been renamed to "Show All Bookmarks" in the bookmarks menu.

Hp the system recovery media does not support this computer, WIN7 GS72 Notebook

HProduct: GS-B66US (17" I3 notebook)
OS: Win7
Bios Rev: F.47
Error message: "hp the system recovery media does not support this computer. You are not able to restore this system"
Changes made to system: Updated bios (I think).
Getting error messages (at system boot, as windows start, and from the intel hard drive controller) warning me to backup data and hard drive my fail.
I replaced the harddrive and inserted the first of my 4 recovery DVDs (created before I updated the bios). After booting from the first recovery disk I get the following message
"hp the system recovery media does not support this computer. You are not able to restore this system with the media"
The computer still boots with the old hard drive (with drive failure imminent messages) I do see support assistant offering another bios update but I did not install it with the hard drive problem
PLEASE HELP
TIA

Hi,
I think there could be two possible reason. wrong media or systemboard is changed.
did you create any recovery media yourself or you ordered the recovery media from hp? also, was there any systemboard replacement done before?
media created on some other computer (same model) may not work on your computer.
you can order the media from hp.com here.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00810334
also once systemboard is replaced you need to get the configuration settings done for BIOS(only HP can do it).
hope it helps
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Domain name does not link to index page.

Having a lot of difficulty publishing to FTP, have researched many forums and unable to find answers. Whether I publish to FTP via iWeb or Cyberduck, my domain name danbaileymusic.com shows a 403 Forbidden Error. However if i type in danbaileymusic.com/index or /music, ect it loads. The whole site functions fine, but the domain name does not link to the index page.
In Cyberduck all permissions have been turned on. Also I noticed that when publishing to a local folder, iWeb creates a folder "danbailey" and an index.html. This index page does not work in Cyberduck, however the index page that is WITHIN the folder "danbailey" does work, but it doesn't link to the domain name.
Please help! I've been working on this for weeks and cannot figure out why the domain name is not working!

It only creates the page names with first letter capitalized (as in Index not index) I have tried changing it from the sidebar and from the Page Name in the Inspector -- typing "index" comes back as "Index" It's easy enough to change the "I" to an" i" at the file level (which did fix the problem) but doing this also breaks all the links I have to "Index.html" Fixing this on the creation side would be ideal. Thoughts?
I am using iWeb '09 v.3.0.1 if that makes a difference

My TOC in the epub document does not link to the chapters

Hello!
I created a document in pages that I am exporting as an ePub. When creating the TOC, I have ticked "make page numbers links". However, when I open the epub file, the TOC that appears in the document 1) does not show page numbers; 2) does not link to the chapters (or anywhere else).
What is it that I'm doing wrong? Any help will be appreciated.
Thank you!

Try a restart of your entire system. Shut down both your modem and your router if they are two separate devices. Then restart each item one at a time with about three minutes between each device.
Also reset the iPad by pressing and holding the Start and Home keys together, ignoring there'd slider until the Apple logo appears.

Hi, I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html

Maxtor OneTouch III does not mount with Firewire

My Maxtor OneTouch III does not mount with Firewire.
I changed both cables, and ports on the drive to try with my 400 port on the MacBook Pro.
The drive will start up, the light will flash, remain steady, flash again. And then just as the Mac finishes booting, the light turns off and it does not mount.
It works just fine with a USB cable. But I bought it so it could be used as a firewire drive.
Other firewire drives work.

Hi Judy,
Has this external HDD ever worked while connected with FireWire? (In other words, did the drive just stop working via FireWire, or is this the first time you've tried to hook it up via FireWire?) Does it work over FireWire on another Mac?
If the answer to those questions is no, it's likely that the firewire ports on the external HDD are bad.

HT201303 Why when I use my iPad apple does not link to my iPhone account

Why account does not link to both apple devices

Take a look at this link, http://support.apple.com/kb/TS1591

System Recovery media does not support the computer. HELP!!!

Ok problem here the recovery discs that were created do not work. And this is where I'm stuck.
First the details. It's a DV7-6163CL Laptop with windows 7. The discs were created shortly after we got the computer. The reason we have to try and recover the computer is hard drive #1 failed and failed hard. Hard drive was replaced. Now after trying to use the recovery discs we get the error message after a few windows loading screens in Recovery Manger.
"The system recovery media does not support this computer. You are not able to restore this computer with the media."
Well Hp doesn't support his platform anymore due to its age.
Is there anything I can do next to formatting the computer and getting a new OS?

Many times this error is caused by missing info in BIOS. Can you enter BIOS-F10 at power on- and check for serial number,etc?
Sometimes a new hdd requires prepping with Cyberlink Utility cd first. Download and Save the file. Once download is complete, put a blank cd in your drive and click the file to create a boot cd. Boot with this cd and wait until you get a green check mark indicating hdd is ready. Remove the cd , insert first Recovery Disk and restart the laptop.
http://ftp.hp.com/pub/softlib/software11/COL32372/pv-80183-1/sp44645.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Why OID Connector User Search Reconciliation Sch. Job Does Not Link Users?

Hi,
I provisioned a user to the resource successfully; then I ran OID Connector User Search Reconciliation Sch. Job sucessfully. When i check the Reconcillation Event results, i can see the event related with my Sch. Job but in the details of the event Linked To part is empty. I am expecting to see linking result but unfortunately no linking result represented. It says Not linked to any user as result of Linked User field.
Do u have any idea?

In Form, i have the following Additional Column with the following Field Label --> KK
In the ReconAttrMap, i have the following mapping --> Code: KK Decode: uid
In the Reconcillation Rule, i have the following Rule --> User Profile Data: User Login
Operator: Equals
                                             Attribute: Kullanici Kodu
                                                  Transform: None
                                                  Case-Sensitive: Unchecked
                                                  Properties Set: Checked
Rule is Valid and Active and Using AND Operator
In the Resource Object, i have the following Reconcillation Field --> *KK [String], Required*
In the Resource Object, i have the following Reconcillation Action Rules --> Rule Condition: One Entity Match Found Action: Establish Link
                                                                      Rule Condition: One Process Match Found Action: Establish Link
Then i click to the Create Reconcillation Profile.
Job still does not link Users. Any missing settings?

Palm IIIe does not link to computer

Similar Messages

Maybe you are looking for