Palm IIIx compatable with Vista?

I have just obtained a PalmIIIx. Will it work with my Windows Vista operating system ?
Post relates to: Palm IIIx

Hi, and welcome to the Palm Community Forums.
You will need the new Palm Desktop 6.2.2 (see Support & Downloads link above at the top of this page). Then, you will need the new PalmHotSyncSetup application from http://www.pimlicosoftware.com/ . Note, I have not tried it, but everything I've ever used from Pimloco Software has been first rate, so it should work.
Let us know how you make out.
p.s. I doubt it will work if your Vista system is 64-bit. There are no 64-bit compatible USB drivers.
Post relates to: None
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Similar Messages

Palm Desktop Conflict with Vista

I use Windows Vista Home Premium, and I have installed Palm Desktop 6.2 to be used with a Tungsten E2. Problem is that I get an AppCrash error message for the program Windows Media Player when the Palm Desktop software is installed on my computer. About every hour or so, I get the following error message that reads as follows:
Problem Event Name: APPCRASH
Application Name: wmplayer.exe
Application Version: 11.0.6001.7000
Application Timestamp: 47919356
Fault Module Name: PalmUSBDirect.dll_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 40c81674
Exception Code: c0000005
Exception Offset: 04834028
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: ee0c
Additional Information 2: 0f3137665bbf0bb676c8a16f3fa76e52
Additional Information 3: 1eff
Additional Information 4: 719ef9a8ab079fcb5b3b21da22d4fa30
I have deleted the Palm Desktop software from my computer, then deleted the Palm folder under Program files, and finally restarted my computer. After this the error messages stop.
I have then reinstalled the Palm Desktop software onto my computer and the AppCrash error messages for Windows Media Player then come back. Very annoying.
So far as I can tell, the Desktop software syncs fine, using Outlook program as its source.
Anyone else have this problem? Is there a glitch with the Palm Desktop software as it is used in computers with the Windows Vista OS?
Any help would be appreciated.
Peter
Post relates to: Tungsten E2

Try a clean uninstall of Palm desktop and see if that may correct the issue.
Here are the clean uninstall instructions for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

Photoshop 7 compatibility with Vista 64

I just purchased a new Dell studio computer with Vista 64 OS and Photoshop Elements 7 preloaded. I cannot get editor to work at all and organizer will not import photos from my camera. I have followed techs' instructions from Adobe and Dell to no avail. After many frustrating hours I went to the windows website and discovered Photoshop Elements7 is not compatible with Vista 64. It would have been nice if the Dell salesman had told me this. Anyway, I have paid for this software which I can't use and Dell will not give me a refund since the software is preloaded. I am considering a trial download of Corel Paint Shop Pro Photo X2 to see if it will work with the Vista OS.

Many people have reported that PSE 7 works well on Vista 64.   While Adobe has stated explicitly in writing that it does not support earlier versions of PSE on Vista 64, it has not put that in writing for PSE 7. A couple of people have reported that Adobe support says that it is not supported, though Adobe customer support is often mistaken about many things.
Did you actually contact Adobe technical support, and did they work with you?   I'm guessing that Adobe business development did the deal with Dell to distribute PSE 7 on Dell Vista 64 computers without consulting customer support, which doesn't want to support Vista 64, and now Adobe is just trying to ignore the mess they created.
When you say "organizer will not import photos from my camera", do you mean that the Adobe Photo Downloader does not launch when you plug in the camera or card? That is one thing that is known not to work on Vista 64, due ot a Windows limitation.   Have you tried importing the photos by doing File > Get Photos And Videos > From Files And Folders?   What happens when you do that?
With respect to the Editor, you could look at these troubleshooting steps, the first of which are quite simple:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes
They combine the knowledge from these forums with the Adobe tech notes and are more complete than what most Adobe support people have access to. You might try working through all the steps, and even if you've tried something similar before, try the steps exactly as written here.

Sync Palm T/X with Vista Outlook 2007 Pro and Xp Outlook Pro

Help, do anyone have step by step directions on how to make my 2 systems sync with my Palm. I input most of my data on the XP Outlook 2007 but when I get home I want to sync but I have Vista. I keep getting error messages no matter how I set my defaults.
Post relates to: Palm TX

Can you paste your hot sync log here?

Documents to Go on Palm TX Syncing with Vista

I cant seem to get my documents to sync with my Palm TX. Everytime I click on the Documents To Go icon on my Vista desktop it gives me a "Runtime error" message. Help! What do I do?
Post relates to: Palm TX

Plan B (free) is to create a folder on a SD card into which you copy (via your computer's SD reader/writer or a USB addition) the files you want your device's Docs2Go to use.
Providing the installation of the Docs2Go was successful onto your TX via Vista, it'll read these and be able to edit and create new files. Granted, its not as seamless as a properly working Docs2Go as you swap files like this manually, but you regain functionality of the program on the device.
You'll also want to disable the sync to Docs2Go via Hotsync > Custom > Documents to Go > and set its default as 'Do Nothing' and promptly forget Docs2Go exists on your machine. But don't uninstall it as this may also uninstall the device's version at the next Hotsync.
Its really the sync portion of the Docs2Go that came with your TX that doesn't work in Vista - but as that's a major point of the software....
I'm not sure how long you've had your TX or how long you've been on Vista - but given Palm is still selling its 3 year old TX, one might assume it would have been a nice gesture for DataViz to ensure the product that comes on the CD actally works with current OSs, yes? Apparently not - the upgrade for a Vista / Office 2007-friendly version runs at around $30. Which seems excessive given that the PalmOs is in its death throes.
Hope Plan B works for you.
Post relates to: Palm TX

Secure Desktop compatibility with Vista

Cisco states that CSD version 3.3.0.118 will work on Windows Vista if MS hotfix KB935855 is installed- I have yet to see this work. I've also seen a compatibility chart that states that you need Service Pack 1 on Vista- I have gotten that to work.
My issue is I have a lot of users who are reluctant to install sp1 on their personal Vista machines. I don't even want to do this on mine because of the other ill effects it can cause. Does anyone know the exact hotfix that is needed for Vista to work with CSD without having to install sp1?

To the best of my knowledge it can't be done without SP1.

I want to transmit a square pulse through USB port, is it possible?? if not then what is the best way to do that, preferable is with serial then parallel, and its compatibility with vista,XP,and @))7 windows

hi froends
i want to transmit a square pulse using lab-view, please help how to do that, the preference will be USB,SERIAL, Parallel ports, it it must be compatible with all the os versions, like 2007 windows, vista,XP and other.
please help..................

sanghi wrote:
OK I WANT TO DRIVE A RELAY.
SUGGEST SOMETHING
Calm down!
People can't read your mind. If you want help, repsect those who contribute their time for free to try to help you.
Put yourself in our shoes. If I tell you I want to build a rocket, what information would you give me? You would need to know if it's for a hobby, something bigger, carries a payload, carries living organism, how far does it go, where does it land (if at all), etc...
First of all, we still don't know what you want to do with this relay. Using a computer to generate is series of pulses is not usually the best way. What is the frequency of the pulses that you want to transmit? And why do you want to use a relay? What are you driving? Can the relay that you are using fast enough to follow the pulse train that you'll be sending?
Provide information, ask questions politely and people will help you.

N91 COMPATIBILITY WITH VISTA

Hello, I am trying to setup pc suite with my nokia N91. I used the suite with the same phone with xp pro and upgraded to vista and was told that pc suite was not comatibile, this was a few months ago. I have just downloaded the pc suite today hoping that my phone would syncronise mmmh no luck. firstly i cannot get the updated drivers for the mobile. can some please advise if it is possible to connect the N91 with pc suite using vista
thanks

Hi jbraid
I don't know whether you have seen this thread which seemed to work for some!
/discussions/board/message?board.id=pcsuite&message.id=8984#M8984
Happy to have helped forum in a small way with a Support Ratio = 37.0

Palm Desktop compatibility with Windows7

I have used Palm DESKTOP for quite a while. The version I have is 4.1. I have Windows XP machine. I do NOT use a hand-held device, I just use the Palm Desktop as a Personal Info Manager.
I am now considering buying a new computer with Windows7 preinstalled.
The question I have: are there any issues with installing the Palm Desktop 4.1.1 on the new machine?
Any problems?
Thanks,
Grampyv

I have used Palm DESKTOP for quite a while. The version I have is 4.1. I have Windows XP machine. I do NOT use a hand-held device, I just use the Palm Desktop as a Personal Info Manager.
I am now considering buying a new computer with Windows7 preinstalled.
The question I have: are there any issues with installing the Palm Desktop 4.1.1 on the new machine?
Any problems?
Thanks,
Grampyv

X-FI XtremeMusic - Compatibility with Vista x64

Hi. I currently have the Audigy 2 ZS installed in the following system:
Intel Quad Core Q9300 (@ 2.5ghz)
4GB DDR2
ATI Radeon HD4650 GB
Nvidia 730i chipset
Yet installing the drivers provided on the website with the operating system of Windows Vista x64 gave me numerous problems (particuarly in games...no surround hearing or decent bass) so have decided to go for an 'assumed' more supported card - the XFI XtremeMusic.
Now, my question(s) is, when I receive the XFI will the drivers on the CD be Vista x64 be supported and if not does it matter (I needed the CD before for my Audigy 2 ZS on XP before installing the drivers on the Creative website).
Do I get all the GUI apps included
Am I going to get that surround-sound-like hearing back (DirectSound or something is it's - the game I'm particuarly talking about is Americas' Army here if that helps). Bass too
I need to ask these most probably obvious questions before I buy the product, just to save me the dissapointment.
Thanks,
Junkz.

Your question :
when I receive the XFI will the drivers on the CD be Vista x64 be supported
Answer :
No, most likely you will get an original Windows XP installation CD with Win XP drivers and the software suite for the X-Fi XtremeMusic Soundcard. The Windows XP installation CD for Win XP will not work in the any vista OS. Below is a weblink to get the X-Fi Installation CD for Windows Vista.
This vista installation CD will have all the drivers and software needed to operate the X-Fi ExtremeMusic Soundcard. Yes. the GUI apps are included on the vista installation CD and some upgrades are required.
Whats NOT included on the installation CD is the Dolby Digital Li've and DTS Connect Pack, If you want it you have to buy it separately, weblink below. Also, this vista installation CD does not have the up-to-date drivers and software.
Once you install the Vista installation CD completely, You must either download the updated drivers and software separately from Creative Labs download webpage or use "Creative Software AutoUpdate" to update to the latest drivers and software of your choice.
Sound Blaster X-Fi Installation CD for Windows Vista :
http://us.creative.com/products/prod...5&product=6743
Dolby Digital Li've and DTS Connect Pack :
http://buy.soundblaster.com/_creativ...DDN6Z2H2ADDEZD

Software compatibility with VISTA

I have tried following the directions online by installing the 4.2.1 desktop software. After I connect, I am still receiving an error box that is titled Intellisync and it says Internal Error. I have tried to uninstall and install multiple versions of the software and I can't get it to work. Is anyone else having this problem.

Unfortunately, the Touchpad doesn't even appear in the device manager. It's just not recognised at all. There's not even an unknown device in there or any devices with errors.
I've tried going to the Toshiba European driver page and have downloaded and installed both drivers. Still no joy. It remains persistantly invisible in the device manager. The Synaptics driver even says during install that it cannot work if the touchpad itself isn't recognised by the OS.
The laptop has been re-booted and the BIOS re-checked for the touchpad being enabled so much it must be getting a persecution complex :-P

ITUNES HD RENTAL NOT COMPATABLE WITH VISTA?

I downloaded an HD rental and when I hit play it said must have windows seven to play HD rental. It would have been nice if there was a warning before you download something that won't work on your computer. All the 10.1 itunes say,"works on PC and mac" Well that's not true. How do I get my money back or move the rental to my mac so I can view that thing?

Itunes 9.1 is definitely NOT compatible with Windows XP at this time. The culprit appears to be the Bonjour services package. I recently attempted to install via 3 methods: through Apple Update, via direct download over wireless and via direct download over wired connection. The result was the same in all three instances: when attempting to start itunes 9.1, it would immediately crash with a message "Itunes has encountered a problem and needs to close...". Upon checking the application event viewer (control panel > performance & maintenance > administrative tools > event viewer) I was able to determine that the itunes crashes were due to Bonjour in all but one instance. Bottom line: steer clear of itunes 9.1 until Apple gets their comparability issues corrected.

LaserJet5P compatability with Vista

I am in the process of purchasing a new computer (Dell) which has no parallel port for my printer. I am hearing conflicting stories about whether or not this will work on the new computer using a USB adapter. I am sure I will need a new driver that will make it work. The printer is about 15 years old, but still works great, is fast and can crank out plenty of pages in black & whit much cheaper than my color printer. Can anybody help me on this.

No, those were not the issues. I cleanup every day and defrag every week and did both before installation. Kept giving me those errors I listed.
Still could not resolve them tonight so I uninstalled it.
Verdict for me was as expected, but maybe others will have better luck, or perhaps they will eventually work the bugs out.
Thanks anyway though.
KAW.

HELP printer compatability with computor.

Help...Have hp psc 1310 hp officejet 4200 series......Got a new gateway which is Vista and my old one was XP......my printer will print, but can not scan and tried to program the cd in again and computor would not accept it. Will I need to get a new printer that is compatable with Vista? Any thing to update of just have to get new?
thanks enhelder
Message Edited by enhelder on 07-07-2009 10:51 AM

Hello Highcountryhike,
Thank you for posting your request. You should have no issues updating to 10.10 Yosemite. Below are a couple links that should help.
If you run the Software Updates from the Apple Menu, to check for updates. Some have had issues not seeing updates, so simply click on "Store" from the top menu, and then click on Reload Page". Select to install HP Updates to ensure you have the latest drivers.
In some instances, the printer can be updated in the printer queue to resolve other issues, so check to make sure that the printer is listed with the HP Printer Series driver and not just AirPrint. System Prefernces/Printers & Scanners/ select your printer on the left and check on the right side under "Location:" that Kind: is the printer series. You can also click the "-" symbol to remove and then re-add the printer queue again, choosing the HP Printer series name to install the drivers.
Installing the Full Feature HP Printer Driver in OS X v10.10 Yosemite
Mac OS 10.10 Yosemite and HP Printer Support
Please post back with any further issues/questions.
Thanks,
Double-U-Dee
Don't forget to give Kudos where Kudos is Due - OR - if a Response Resolved your Issue, Click the "Accept as Solution"
I am an HP employee, but my posts and replies are my own and do not reflect the opinion of HP.

MSI P6N SLI LIVEUPDATE WITH VISTA

Does anyone know whether the MSI Liveupdate is compat with Vista.
Dave.

LiveUpdate at times won't get you the latest of the latest driver update... so don't hope so much on it even it starts running on Vista.

Palm IIIx compatable with Vista?

Similar Messages

Maybe you are looking for