Palm m505 Desktop onto Windows 7 Home Edition

Hi,
I desperately need help. I have a couple of Palm m505 with lots of contacts. I have upgraded to a new PC with Windows 7 Home Edition.
I have tried downloading both Palm 6.2 and Palm 4.1.0 onto my new PC but keep getting error messages when I try to install either of these.
Could some kind soul out there who knows how to solve this problem, help me with step-by-step instructions as I am fairly new to all this.
Keeping my fingers crossed.
Myra
Post relates to: Palm m505

I've moved your post to the Windows Hotsync section of the Forum, where your question has been asked and answered many times.
Look for the recent post about syncing to a m515 and Win7, or the sticky post at the top of the section entitled, "64 bit Palm Desktop drivers are here!"
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Problem with PC Suite and Windows 7 Home Edition 64-bit

I installed PC Suite on my desktop with Windows 7 Home Edition 64-bit installed. I was able to eventually run PC Suite (granted it needed to run in XP SP2 compatibility mode) and sync my calendar on my W518a cell phone with PC Suite via Bluetooth communications. After I turned off my computer and restarted it, I could no longer open up PC Suite...its icon appears in my system tray with a red X over it as if it can't find the program.
The SonyEricsson website indicates PC Suite can run with Windows 7.
What is causing the problem I am having? How do I get this corrected?

I have downloaded and reinstalled the PC Suite software. Although it is not working as well as it should, as long as I have my cell phone on with Bluetooth enabled prior to clicking on the icon to open the application, it seems to work OK. Otherwise, when it opens, it just hangs and the only way you can close the program is to get into Task Manager and force it closed when its status is showing as "Not Responding". I also have found that just "closing" the PC Suite window does not close the application...you have to click on the option to "Exit the Application" otherwise you continue to have it in your system tray with a red X over the icon.

How can I get a boot-disk for a Compaq P2500 laptop Windows XP Home Edition?

I'm already in another forum with a eerily similar question, but that's for the HP Media Center Pavilion m8000e desktop system (Windows Vista Home Premium) I was just given; I've ordered a new hard drive for that. I assume the directions to create a boot disk with the *.iso file (using Imgburn) is going to work; I have the 25-digit code for that.
This question here now is for my wife's older Compaq P2500 2596US laptop running Windows XP Home Edition. This too needs a new hard drive, but I also am missing the boot disc for this; I do have the 25-digit product code.
How can I get a boot disk for this laptop? I tried the Ubuntu method outlined in a few posts; geez, what a headache ... never could get it managed. Does HP not make any boot disks available? Microsoft told me to check with HP.
I can furnish the product code; model #; serial# ... gee, maybe the oroginal receipt is even laying around somewhere ...
I need a boot disk to get the new hard drive up on board (if I end up ordering that).
Thanks for any help!
Michael

Hi
Please find the link given below might be helpful for your.
http://www.computersurgeons.com/productdetails.aspx?ID=4219
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Windows xp home edition hp

Hello,
I am running a PC
DMI System Manufacturer Compaq Presario 061
DMI System Product PX631AA-ABU SR1440UK GB520
DMI System Version 0nC0411RE101AHI2 00,
and have Windows XP Home Edition HP, with 25 digit long product key on the label, but I have no cd.
same problem with Microsoft Works 8 HP Tracking ID: 14 digit long. I have no cd with drivers...
other system details:
Computer Type Jednoprocesorowy komputer PC z interfejsem ACPI
Motherboard:
CPU Type AMD Athlon 64, 2200 MHz (11 x 200) 3500+
Motherboard Name MSI RS480M2/RS482M2/RX480M2/RX482M2 (MS-7093) / MS-7184
Motherboard Chipset ATI Radeon Xpress 200/1600, AMD Hammer
DIMM1: Infineon 64D64300HU5B 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM2: Infineon 64D64300HU5B [ TRIAL VERSION ]
BIOS Type Award (04/11/05)
Communication Port Port drukarki ECP (LPT1)
Display:
Video Adapter nVIDIA GeForce 6200 TurboCache (MSI NX6200TC-E)
3D Accelerator nVIDIA GeForce 6200 TurboCache
Multimedia:
Audio Adapter Realtek ALC658 @ ATI SB400 - AC'97 Audio Controller
can you help me with that?
when I bought this computer was no cd's included with windows,drivers and microsoft works 8.
was only cd for my hp printer.
I hope you can help me to solve this problem. you need my key digits...can I wright this digits here or in private message?
sorry for my english. I hope You understood me. Thank You
-stefan

Hello @stefan-elwuo,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are looking for operating system discs for your desktop computer, and I would be happy to assist you in this matter!
To acquire the CDs you need to recover your operating system, I recommend following the steps in this document on Obtaining HP Recovery Discs or an HP USB Recovery Drive. If you live outside of Canada or the US, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Is iTunes 11.1.0 compatible with Windows XP Home Edition?

I am trying to update my iTunes to 11.1.0, but get a Windows error message that says it might not be compatible with Windows XP (Home Edition). I've never had this problem updating iTunes before. Any insight would be greatly appreciated. Thank you.

Has XP been updated to Service Pack 2? Right-click Computer on your desktop or in the start menu and click Properties. Visit Windows/Microsoft Update and install the service pack if needed, otherwise ignore the error and continue.
tt2

Installation 10g on Windows XP Home Edition

When I try to install 10g on my Windows XP Home Edition, I get a error message, "oui.exe has encountered a problem and needs to close." Whats that all about?

Windows XP Home is not a supported platform for Oracle. I have heard some people have been able to get it to work but usually not without a lot of tinkering. General rule of thumb -- Windows anything Home edition is not supported by Oracle. My suggestion is if you have the disk space, install VMware and put a Linux distro like Centos in it and install Oracle on that. Or go the dual boot route.
Tom

Installation failed on Windows XP Home Edition

Hi,
I tried to download Oracle 9i Enterprise Edition on Windows XP Home edition.
After 15% installation was over , it prompted me for Disk2 and I gave the path c:\dirName\Disk2..where the disk2 is located.But the prompt dialog keeps on asking about Disk2.
Can anybody suggest what can I do about it?
Thanks in advance.
Rampreet

Sir,
i used fresh system with 2000 advance server. when cd ran it required jre i provided i used General Purpose. But after finishing upto 100% database configuration assistant was not configuured. no pre configured datbase was visible as it gave Oracle not available. Please solve it it's urgent..any particular method to install.
i am trying it for past 3 weeks no succes.. I hope u will guide me if u have got the solution by now.
akash
[email protected]

Error message downloading j2se 1.5.0 on windows XP home edition (SP2)

Hello:
I am getting the following error message attempting to install the j2se 5.0 on my windows XP home edition (SP2):
"Error JavaTM installer
The installer cannot continue because the files necessary for installation are unavailable. If trying to install a beta or older version please check http://java.sun.com/j2se to determine if it is still supported. If so please try installing at a later time as these file might be only temporarily unavailable."
There is a bug report:
Bug ID: 6237992
Tested Bundle: 5.0u2_b09 JDK iftw on staging site
http://webwork.sfbay/j2se/1.5.0/download.jsp
Tested O/S: XP-Home (sp2)
Problem:
The installer throws error messages. I tried on three different
XP-Home (sp2) machines in our lab. It throws error message the very first or second time and after that, it seems to work fine.
Steps to reproduce:
1) On XP-Home(sp2) machine, try to download and install the JDK iftw bundle from
http://webwork.sfbay/j2se/1.5.0/download.jsp
2) During the installation the first or second time, one of the following messages thrown:
A) "This installation package could not be opened. Verify that the package exists and than you can access it, or contact the application vendor to verify that this is a valid Windows Installer package"
B) Error - Java Installer
"This installer cannot continue because the files necessary for installation are unavailable. If trying to install a beta or older version, please check http://java.sun.com/j2se to determine if it is still supported. If so, please try installing at a later time, as these files might be only temporary unavailable"
This problem seems to occur on XP-Home(sp2). When error message pops up, keep trying it, it 's eventually OK. It may confuse consumers at the first two times.
xxxxx@xxxxx 2005-03-09 05:11:47 GMT"
I have tried the downloading five times to no avail, both by double clicking, and using the windows run utility. Any ideas would be greatly appreciated.
Thanks

I am getting the same error when opening the J2se Development Kit 5.0 Update 8 after I press the Run button. ( "This installation package could not be opened. Verify that the package exists and than you can access it, or contact the application vendor to verify that this is a valid Windows Installer package").
Is there a solution ?
Thanks,
Luck 08/21/06

Can I use Adobe Creative Cloud apps with Windows XP Home Edition 32-bit SP3?

I use a pc with:
Besturingssysteem / Operating System:
          Windows XP Home Edition 32-bit SP3
Processor :
          AMD Athlon
          Thunderbird 0.18um Technologie
RAM:
          1,00GB SDRAM (3-3-3-6)
Moederbord / Motherboard:
          MICRO-STAR INTERNATIONAL CO., LTD MS-6330 (Socket A)
Grafisch / Graphic:
          Standaardbeeldscherm (1280x1024@60Hz)
          64MBATI RADEON 7200 SERIES (ATI)
Opslag / Storage
          74GB Western Digital WDC WD800BB-00DKA0 (ATA)          35 °C
Optische schijven / Optical Disks:
          NEC DVD_RW ND-3520AW
I am a starting illustrator and I wanted to make use of the special Creative-Cloud-subscription-offer :
incl. Photoshop CC and Lightroom 5 ( $12,29 /month. ).
Is that pòssible with my pc O.S. ??
Regards, Benjamin1964

I am a starting illustrator and I wanted to make use of the special Creative-Cloud-subscription-offer :
incl. Photoshop CC and Lightroom 5 ( $12,29 /month. ).
Is that pòssible with my pc O.S. ??
No.
Photoshop CC and Lightroom 5 require Windows 7 or Windows 8.
http://www.adobe.com/products/photoshop/tech-specs.html
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
They will not run on Windows XP.

Itunes 7.1.1. and Windows Vista Home Edition

Hi there. I have a new PC from HP model T3765.it and I am NOT able to use my iPod nor to install iTunes for more than two months: my PC says "you have to repair iTunes to make it working with Windows Vista". I followed the instructions (Control Panel --> Programs --> iTunes --> repair) but no result. My PC has Windows Vista Home Edition. Does anyone know what to do? Is there a way to sort this out or do I have to wait for a new iTunes release?
Thanks, Giacomo

Can anyone help me with instructions to restore the Ipod to a back level? I have searched the discussions but haven't found a method. I have downloaded 1.2.1 but Itunes wants to check for an update and won't let me get past that point.

How may I eliminate all of iTunes from Windows XP Home Edition before making a "clean" installation of iTunes?

Hello. I found that in Windows XP Home Edition that I had two subdirectories of iTunes: C:\Program Files\iTunes and C:\Program Files\iTunes(2). I assume this situation has arisen by me not properly updating iTunes in the past. When it came time to update iTunes from one of the version 10.3s to version 10.4 of iTunes, I tried to do something about the pair of iTunes subdirectories. Via Start, Control Panel, and Add or Remove Programs I "Remove"d the only listing of iTunes; that is iTunes(2) was not listed there. But afterwards C:\Program Files\iTunes(2) still existed, as viewed in the program Windows Explorer. Next while offline I installed iTunes10.4 by running the downloaded file iTunesSetup(4).exe in my case. I chose C:\Program Files\iTunes(2) as the directory for installation. Next I uninstalled iTunes via Add or Revmove Programs. The directory C:\Program Files\iTunes(2) then still existed. I need an iTunes cleanup utility, if there is one, or else a way to eliminate all vestiges of iTunes, including registry entries, from my Windows XP Home Edition. [I think this situation is the opposite of a situation in which the Windows Installer Cleanup Utility (WICU) would apply. I think the WICU is useful when a program is visible by name in the Windows Add or Remove Programs list, but can't be removed by clicking on "Remove" in that list.] [I also noticed the directory C:\Program Files\iPod(2). Is that directory associated with iTunes(2)?] After that I would hope that a fresh offline installation of iTunes 10.4 to my computer's hard-disk drive would result in only C:\Program Files\iTunes among iTunes subdirectories in C:\Program Files when viewed in Windows Explorer. Please inform me how to reach this goal. Thanks.

I'd also dig down into where your home user account holds temp files, as well as application preferences and support. I just know Vista began using \myaccount\AppData and multiple locations under there.
Apple leaves behind every past installer cache, support (imporant to get rid of that also).
The first thing I do (no iPod etc) is uninstall Bonjour and disable iPod and MobileMe.
Windows Uninstaller Cleanup Utility also use to be a must for stubborn "partially installed" apps.
When you are done, CCleaner and Registry.
Another place to clean is %TEMP% (may be different in XP).

Sap b1 setup failed on Windows Vista -Home edition

Hi experts,
I installed SQL-2005 on windows vista home edition and also installed SAP B1-2007B-PL09 but it shows error connection with License server failed and SAP B1 service manager-License Manager 2007 are also disable .so my question is it SAP b1 support Windows vista-home edition.pl suggest me solution.
Regards,
Sudhir pawar

Sudhir,
Windows Vista home edition is not a supported Operating system.
That being said, the reason that your license manager is not enabled is more than likely not due to this fact.
Close the server tools, and relaunch but this time right-click and 'run as administrator' this should enable all the options and allow the license server to start.
You may also want to view the system requirements PDF available in the SAP B1 document resource center, this should give you some insight into supported platforms.
I hope this helps,
Lucas

Cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2

cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2. I followed the instructions step by step but it does let me install if fully when asks me to fully install it says it cannot where to install.

Hi,
how much diskspace did you assign to the Windows partition ?
And did you do the reformating of the WIndows partition as described on pages 8-10 of the BootCamp Installation Guide ?
In your first post you mentioned 'fully install' twice. Any chance that the XP disc you use is an Upgrade disc and not a full retail/OEM one ?
Check with the label on the disc because such XP upgrade disc are not useable with BootCamp.
Regards
Stefan

Oracle 8.1.7 Release 3 on Windows XP Home Edition

Hi,
I'm trying to install the personal oracle 8.1.7 in a laptop which is an windows xp home edition. The installer doesn't start!
Is it a compatibility problem?
What should i do now to install oracle?

Tom,
Thanks for replying.
I don't see what I can compile. The initial program I am trying to compile is very simple it has a connect statement followed by the definition of a cursor, the cursor is opened and the fetch is performed. The program crashes on performing the open of the cursor. It seems to me that Pro*C is producing C output that the comipilers, (cl.exe in the visual studio .Net IDE, or mingw gcc for win32), cannot turn into runnable code on the Windows XP Professional platform. Pro*C is not open source code so I cannot recompile that, Microsoft cl.exe is most definately not open source. gcc is open source and I suppose I could recompile that but surely the mingw win32 compiler should work as it is standard and widely used. Anyway the output of both the compilers fails. Maybe I will compile gcc for my installation but it seems to me like Pro*C is probably the culprit here and trying to run the Oracle 8.1.7 version on XP may not be possible. I posted here in case this is a known problem.
Another thought has just occured to me that maybe I should try running a 10g or 9i version of Pro*C on the 8.1.7 installation. How would I get this? Would I have to install the whole installations to get the binary?
Martyn

Installing jdk1.13 on windows xp home edition

hi all,
i'm having difficulty getting jdk 1.13 run on windows xp home edition. i looked at the sun installation documentation and i think it may be an issue of setting the correct class path, unfortunately the advice for setting the class path for xp ran out at that point. please help - thanks leigh

Post exactly what you are doing and what the error is.

Palm m505 Desktop onto Windows 7 Home Edition

Similar Messages

Maybe you are looking for