Palm network connection through USB cradle

Is there any possibility to set up a network connection with the MIDP for Palm (i have an m500) through the cradle?
I more or less just need a byte stream in and out and somehow am lost on the way. Could somebody please hint at what needs to be done on side of the client/server?
thanks

[RWuensch],
Yes, you may set up a PPP network connection between your Palm OS device and the PC through the cradle for HTTP network connection, see this URL for one method of setting up the PPP connection:
Mocha W32 PPP for Win32
http://www.mochasoft.dk/palm.html#palmppp
Once the TCP/IP connection is established between the Palm and the PC, a MIDlet can then make HttpConnection connections to the network and the Internet.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

Similar Messages

Is there any way for me to reverse tether my ipad in order to yse my computer's network connection via usb?

I need to use an Ipad 2 running 5.1.1 without the use of ANY wireless data transfer, this means no bluetooth - 3g or Wi-Fi. I am aware of creating Wi-Fi hotspots, but there is absolutely no wi-fi option possible. Is this possible? If anyone could help me, it would be greatly appreciated.

Sorry but no, there is no way to use your computer's network connection via USB. If you cannot set up a WiFi network, either via a WiFi access point or through your computer, and cannot use 3G, there's no way I can think of that you will be able to get your iPad onto the Internet.
You can, of course, sync apps, media, documents, mail messages, address book contacts, etc. from your computer to your iPad via the USB cable.
Regards.

Windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

There are a number of posts related to copying issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
To change the LAN Manager authentication level:
From the Windows Vista / 7 desktop, click Start
Search for: security
Click 'Local Security Policy'
Goto Local Policies > Security Options
Under Policy, double-click 'Network security: LAN Manager authentication level'
Change level to: Send LM & NTLM responses
Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
De-select 'Require 128-bit encryption'
Click OK
To disable Windows Search:
Start > Control Panel > Programs > Programs & Features
On the right-hand side, click "Turn Windows features on/off"
Scroll down, and de-select "Windows Search".
Press OK, close all windows and restart.
A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

Error message -1073807298 when connecting through USB

Hi,
I am trying to retrive data from an instrument through serial port as well as USB,
My vi works smoothly while connecting through serial port.
But when i try to connect through USB Error code-1073807298
is coming. This error comes when visa try to write to the instrument.
From visa configure serial port.vi no error is coming.
Can someone suggest a method to solve this problem...

I get exactly the same error code with a TCP raw socket connection, the weirdest thing is that I actually can read the result of the query. I fixed the problem reading one byte at a time but this is very inefficient (it uses a while loop) and I still get warnings, so I'd like to know if there is a way to fix this or if there is an equivalent of the "Serial Settings: Number of Bytes at Serial Port" for VISA TCP connections....
This is the WARNING that I get when I read one byte at a time:
Warning 1073676294 occurred at VISA Read in LV.vi
Possible reason(s):
VISA: (Hex 0x3FFF0006) The number of bytes transferred is equal to the requested input count. More data might be available.
This is the ERROR that I get when I set the byte count to 1024:
Error -1073807298 occurred at VISA Read in LV.vi
Possible reason(s):
VISA: (Hex 0xBFFF003E) Could not perform operation because of I/O error.
I enclosed the VI for your review,
Thanx in advance for your help,
Attachments:
LV.vi ‏22 KB

WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE

I have an iphone 4, iOS 7.1.2
Mac book pro 13in Mid 2012, with OS X VERSION 10.9.4, Processor speed 2.9 Ghz, Memory 8GB 1600MHz DDR3, Intel core i7, Storage capacity 750 GB, 650 GB available.
WHEN I CONNECT, THROUGH USB CABLE, MY IPHONE TO THE MAC BOOK PRO, THE ITUNES APP STOP RUNNING AND I CAN NOT SYNCRONIZE THE IPHONE.

Hello skkmmayer,
That is probably a lot of stuff you do not want on your iPhone. So this can be handled a few different was. For you current situation, you can delete the apps directly on your iPhone by holding on the app until it starts to jiggle and then tap on the X of all the apps that you do not want. The second thing you can do is before you sync with iTunes, look at the app section on your iPhone to know what gets transfer to it and you can deselect items that you do not want. Lastly, if you download content on your iPad and it is a universal app, you can actually download it directly to your iPhone by looking at your past purchases and download it directly from the App Store. Check out the articles below for more information if need further assistance.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
iTunes 11 for Mac: Sync and organize iOS apps
http://support.apple.com/kb/PH12115
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
-Norm G.

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
iPad: Unable to update or restore

Mic Connected through USB adapter gives High pitch voice in playback

My mic is connected through a usb adapter but when i play my track back in Garage ban after recording I get this high pitch fast chipmunk voice.
And My mic works fine with quicktime audio recording or other audio recording software.

hello32 wrote:
My mic is connected through a usb adapter but when i play my track back in Garage ban after recording I get this high pitch fast chipmunk voice.
most likely the sample rate of your audio interface is too low, it must be set to 44100 in Audio MIDI Setup utility.
similar to the issue of an imported file playing too fast/high pitched:
http://www.bulletsandbones.com/GB/GBFAQ.html#toofast
(Let the page FULLY load. The link to your answer is at the top of your screen)

Ipod only charges for a few seconds when connected through USB

Hello. Thank you for reading. I recently got a replacement ipod. No problem with putting songs back on the new one. However, whenever i plug my ipod into the usb cord on my work computer to charge my ipod, the do not disconnect will come on and the ipod will charge for about 20 seconds and then stop charging and go back to the main menu on my ipod. The only way i can get it to continue to charge is to click on update my ipod on itunes, and that ain't fun. Help smarter ipod users, you are my only hope!

Try to connect your iPod without the USB Hub
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651

Airport Extreme issue connecting through usb to freeagent external hdd

I have a brand new 15"MacBook Pro and am using an Airport Extreme for wireless internet throughout my house. That part of the system seems to work fine. My problem is that I want to connect both my printer and FreeAgent hdd to be accesses through my wireless network. When I plug in a 4 port hub everything seems fine (green light). When I plug in the Free Agent hdd the light immediately turns to blinking amber. In airport utility the hdd does not show up but I get a message which says "disk needs repair". If I plug the hdd directly into my MacBook I can can see it, read from it and write to it fine. I can't find anything that indicates that the hdd wouldn't be compatible with the Airport Extreme. Help!

You can access the AirPort Disk via normal file-sharing connection options, such as selecting the server from any Finder window’s sidebar in the Shared section. AirPort Disk uses two standard methods: AFP (for Macs) and Samba (for Windows or Linux).
Leopard accesses AirPort Disks through the Finder, just like any other network volume. Open any Finder window, and look in the sidebar for a list of servers in the Shared section. You should find your AEBSn.
To mount an AirPort Disk volume, follow these steps:
1. Select the AEBSn in the Sharing section of the sidebar.
2. To connect as a Guest user, you need take no more steps; To use a named account, click the Connect As button in the upper right and enter your credentials.
3. Double click a volume that’s shown to mount it on your system.
For both Windows XP and Vista, open the network browser by double-clicking Network on the Desktop. The base station name should appear in the Network browser.

Nikon D90 and ipad connection through USB

i can't get the nikon d90 to speak to my ipad through the camera connection kit.
-hardware works, i can connect my phone through the jack
-i've had luck with the SD card connector in the past, but it's sadly been misplaced
-my USB to USB mini cable works to power my ihome speaker
-when the cable is connected to both the ipad and the camera the playback menu on the camera greys out.
-i've gone through the standard connect/reboot/wait thirty seconds troubleshooting with no luck.
sorry for the point form, this is the third time I've posted this question and the website keeps deleting my text. ;)
I am overseas and really want to get my photos onto my ipad for posting. i'm wondering if i'm making a really stupid error, and hoping that I am before I go out and buy a new camera connection for the SD reader, or replace the cable.
Thanks everyone!

Thanks for responding so quickly!
Unfortunately I'm overseas so I can't try it out on my computer. (part of what's really frustrating is that I should have tried it out before I left home)
The camera recognizes that it's connected to something, in that the menu greys out whenever it is connected to the ipad, but that's all that I can see so far.

Flash drive only mounts when connected through USB hub

I have a PNY 32gb USB 2.0 flash drive, when trying to connect the drive directly to my Mid 2012 MBP (specs attached) the drive never mounts, doesn't list in diskutil as an unmounted drive either, however when I plug the drive into a Micro Innovations USB Hub (old ~ 2002) the drive mounts (albeit slowly).
On my iMac (Mid 2010 I7) the drive works perfectly in the machine or through Apple USB Keyboard.
Any help?

Is that the only USB drive that doesn't work with your MBP ?
Everything else works fine?

Internet connection through usb port

is ti possible to connect internet from ethernet to usb port for mac book air?if yes how,which things should i need??

You need a USB - to - Ethernet Adapter cable.
Here is a description from the U.S. Apple Store:
http://store.apple.com/us/product/MC704ZM/A/apple-usb-ethernet-adapter?fnode=51

HT1414 i have tried to restore my i phone 3GS connection through usb cable to i tunes.The phone seems to have restored but i am getting this error message;"your phone could not be activated because the activatation server is temporarily unavailable."

Hi
I have tried to restore my i phone 3gs using a USB cable connecting to itunes.The process has gone smoothley but i am now getting this message on my i phone;"your i phone could not be activated because the activation server is temporarily unavailable.Try connecting your i phone to itunes to activate it,or try again in a few minutes.I have been trying and trying again and switched off my firewall too.but still getting this message.Can anyone please advise me?

That is almost always because the phone was hacked to unlock it from the original carrier.

Restore network backup through usb?

I have made all my time machine backups to a hard drive hooked up an airport extreme. I am now trying to perform a full system restore from this backup, but it is going really slowly. Can I restore the backup from usb?

mbw234 wrote:
I have made all my time machine backups to a hard drive hooked up an airport extreme. I am now trying to perform a full system restore from this backup, but it is going really slowly. Can I restore the backup from usb?
Have you tried connecting via Ethernet? That should be considerably faster.

Losing MBB connection through USB

Since I have owned this iMac I have had all kinds of problems with USB connectivity. I initially couldn't get USB printers to be recognized and I have ALWAYS had problems with my Mobile BroadBand devices staying connected. Had it to the local Apple store multiple times and all they did was wipe the hard drive a couple of times and reload software. I eventually had to replace the 1TB hard drive BEFORE Apple came out with a recall. Thanks, Apple. Any help would be appreciated.

Hi, you might get reimbursed for the HDD replacement if Apple did it.
On the USB problem, not quite sure, but...
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Palm network connection through USB cradle

Similar Messages

Maybe you are looking for