Palm T/X and Windows 7 32 bit

Posted in the wrong area! Not a webOS question...
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    Uncheck the access the internet box. There is no longer any info for your TX to look up for the desktop instillation.

Similar Messages

  • Palm Zire M150 and Windows 7 64-bit

    This worked fine with Windows 7 32-bit, but not on Win 7 64-bit.
    Then I found this thread:
     http://forums.hpwebos.com/t5/Windows-HotSync/64-Bit-Palm-Desktop-Drivers-are-HERE/m-p/337516/message...
    I followed the instructions exactly, including the bit in message 6 about allowing Device Manager to show hidden devices.
    I was then able to do the hot sync with my device using the USB cable (the computer has BlueTooth but not IR; the Palm has IR but not Bluetooth; both have the USB connection), without any data in the Palm desktop directory - just doing the hotsync from the device.  It appeared to work okay, but unfortunately, it took out half my address book (including my entire family) and a lot of other data.
    Fortunately, I had saved the data directory elsewhere.  So I merged it with the newly-created data directory.  The device gave a message to click on a button to reset the device, which I did, and - voila! - all my data was there, both on the desktop and on the device.   I made a small change on the device and hotsync'd it again, and it worked fine.
    I'm new here and this is my first post; so if I goofed anything up, somebody please clue me in.
    Post relates to: Zire

    Far be it from us to argue with success!  Congrats on finding a solution.  :-)
    WyreNut 
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

    Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
    Making sure everything is allowed through firewall
    Rebooting phone/laptop/router
    Disabling ipv6
    Disabling all networks except the one curently on
    Re-installing iTunes
    Restoring iPhone
    No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

    I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

  • TS1717 iTunes 11 and Windows 7 (32 bit). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed").

    iTunes 11.0.1.12 and Windows 7 (32 bit, latest version). iTunes crashes frequently (Windows message : "iTunes has stopped working and will be closed"). I may be trying to search for an App. or book (or anything else), trying to access iTunes store, checking for updates to Apps., inputting my password, etc. etc. I have uninstalled iTunes several times, reinstalled several times, but the error persists. I tried the iTunes 10 suggested fix of running in safe mode, but iTunes again crashed when I was trying to create a new ID.
    Any real help would be gratefully received. Thank you.

    Still having this issue

  • TS2529 Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates.

    Tried everything. Still get "backup could not be saved on the computer". Have iPad 1 and Windows 7 (64 bit) with all latest updates. Now what? Is iPad 1 now incompatible with iTunes?

    Have you tried here:
    iOS: Troubleshooting backup issues in iTunes
    Have you tried deleig the existing backup file? I\You can find it location here:
    iTunes: About iOS backups
    Saying your tried everything provides us with zero information as to what you did try.

  • Missing *.inf driver for 2605dtn and windows 7 64 bit

    missing *.inf driver for 2605dtn and windows 7 64 bit
    I just piurchased a new HP laptop with windows 7 64 bit installed.  I do not have any windows 7 disks.
    Where do I obtain the necessary drivers for this printer?

    HI RandyJohnson,
    You do not need to download drivers for this product. Print drivers for your product are available within the Windows 7 operating system. Use Devices and Printers, formerly known as the Add Printer Wizard, to obtain the Windows 7 update. For more information,  go to Install the Printer Driver through the Windows 7 Operating System (c02536257) (in English).
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Screen print imac with bootcamp and windows 7 64 bit

    I have a new 27" Imac i7. I have boot camp installed and windows 7 64 bit. I have auto-cad installed for college. There are several assignments that require a screen print to turn in. I have not been able to figure this out. I have been using the snipping tool, but in certain instances i need a menu drop down included in the screen print. With the snipping tool the menu goes away. I have looked for some ways to do a screen print while in windows, and have been unsuccessful. I have a wireless apple keyboard, the shorter one. The F keys are enabled to be used as the real F keys without using the fn key on the windows side. So when i hit F10 for example it is the real F10 function. Does anyone have any ideas?

    I can get those keys to work if i make the keyboard use the shortcut keys that are listed on the top. For example, if i want to use the f10-f12 keys to control the volume without having to hit the fn key. If i set the keyboard up that way that key combo will work. But if i set up the keyboard to use the f keys really be f keys without hitting the fn key, it will not work. Would you know how to get it like that? I have tried just leaving the fn key out of that combo and it will not work.

  • Adobe Reader X 10.1 Install Failing on XP SP3 and Windows 7 (64 bit)

    After using the Customization Wizard 10 to create an .mst and executing the install via SCCM 2007 which I have done many times before, I am getting the following error on both the XP SP3 and Windows 7 (64 bit) machines in the Application Event Log:
    Product: Adobe Reader X (10.1.0) -- Error 2229.Database: . Could not load table 'ServiceInstall' in SQL query: SELECT `Name`,`DisplayName`,`ServiceType`,`StartType`,`ErrorControl`,`LoadOrderGroup`,`Dependenc ies`,`StartName`,`Password`,`ComponentId`,`Directory_`,`FileName`,`Arguments`,`Description ` FROM `ServiceInstall`, `Component`, `File` WHERE `ServiceInstall`.`Component_` = `Component`.`Component` AND (`Component`.`KeyPath` = `File`.`File`) AND (`Action` = 1 OR `Action` = 2).
    I used the following .msi to create the.mst:
    AdbeRdr1010_en_US.msi
    Does anyone know where to go from here?
    Thanks, Sandy

    I have found another possible bug affecting network printing with 10.1.2 in Protected Mode on XP SP3 machines that has not been previously documented:
    A number of users in one office were not able to print with 10.1.2 in Protected Mode (even with the printing hotfix/patch previously released) to their default printer; however they were able to print fine with 10.0.1 in Protected Mode OR by disabling Protected Mode in 10.1.2.  They could print to Microsoft XPS Document Writer, however.
    The cause was determined to be an issue with capitilization of the printer name in the registry!  10.1.2 in Protected Mode seems to be sensitive to this for some strange reason, though other apps don't care.
    Check the following keys and ensure the capitalization of any references to name of your printer (or UNC path of the printer share) is consistent:
    HKCU\Printers\Connections
    HKCU\Printers\Settings
    HKCU\software\microsoft\windows nt\currentversion\windows\Device
    In our case, the reference to the name of the default printer was in lowercase, while the printer path recorded under settings was in UPPERCASE.   Changing this to match immediately fixed the problem.

  • Wheel Mousr fix and Windows 7 64 bit

    I am using Visual Basic 6 and Window 7 64 bit for my OS. I have the wheel mouse fix for XP, and it also works in Windows 7 32 bit, like the fix did for XP. The Wheel Mouse Fix works fine in Windows 7 32 bit, but doesn't using Windows 7 64 bit. It will
    move sometimes, but not like in a 32 bit OS. How can I get the Wheel mouse fix to work using Windows 7 64 bit??? Is there some way to make it call the Program Files(x86) folder???
    The command line for registering the DLL is:
    Click Start, click Run, type regsvr32 C:\VBMouse\VB6IDEMouseWheelAddin.dll, and then click OK.
    Like I said it works fine for 32 bit, but not using 64 bit. Anyone out there have any ideas.
    Thanks,
    dabeartn

    Hi,
    I'm very pleased to say that I've just this minute figured this one out.
    I'm assuming you've grabbed the download from here:
    http://support.microsoft.com/kb/837910
    The solution is here:
    http://support.microsoft.com/kb/282747
    What I suggest you do is:
    1. Put VB6IDEMouseWheelAddin.dll somewhere where it can live forever more - I went for C:\Windows
    2. Open a command prompt (I opened mine as Admin, not sure if it's necessary but why not eh?)
    3. cd \windows\syswow64
    4. regsvr32 c:\Windows\VB6IDEMouseWheelAddin.dll
    Then open VB6 as usual, under the Add-Ins menu click on Add-In Manager and you should see MouseWheel Fix at the very top. Just tick the Load Behavior boxes as you wish and that's it.
    Cheers,
    Nick
    Cheers, Nick

  • HT5634 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup

    I have a 27 in late 2009 iMac and using bootcamp 4 and windows 8 64 bit I am getting a error message upon startup.  Any way to fix it?

    Windows 8 is not supported on your computer.
    http://support.apple.com/kb/HT5634

  • Hotsyncing a palm centro using a bluetooth adapter and windows vista 64 bit

    Please help. I have read and followed all of the other suggestions on this forum and nothing has worked. 
    I have a palm treo.  When I try to hotsync using the bluetooth adapter, it gives me a message stating:
    "unable to connect,port is being used by another application".
    I have rebooted, soft reset, etc.    and still get the same message.  
    I do not know how to set up another port on the windows vista program.  That was one suggestion.
    I have selected both bluetooth and serial port under the hot sync manager.
    Nothing works.
    Any help is greatly appreciated.
    thanks 
    Post relates to: Centro (AT&T)

    Hello akashmedehrotra and welcome to the community.....
    Windows Vista 64 bit is only sync with a wireless connection.  Either Bluetooth or Infra Red.  The M515 does not have bluetooth, so you would have to purchase an IR Dongle and sync using Infra Red.  You won't be able to sync with the USB cable on your desktop.
    Colapop

  • Need Palm Bluetooth Drivers For Windows 7 64 Bit

    Hi,
    I am a long time Palm Pilot user and I have been there through all the trials and tribulations.  I have just bought a new computer running Windows 7 Home Premium 64-Bit edition and I am trying to find the drivers for Bluetooth sync.
    I am using a Palm Tungsten E2 and the Palm OS 6.2 and with the computer I am currently using (Windows 7 Home Premuim 64-Bit)  I sync via Bluetooth and never had any problems and want to keep it that way.
    WyreNut and several members did a lot of work when Windows 7 first came out and helped a lot fo people with synch issues.  I have searched the Forums and cannot find a link to where I can download the Bluetooth drivers so I can synch my Palm Pilot via Bluetooth to my new computer.
    If someone could kindly point me to where I can get the Bluetooth drivers I will be grateful.  Thanks so much.

    CompDave1 wrote:
    I am a long time Palm Pilot user and I have been there through all the trials and tribulations.  I have just bought a new computer running Windows 7 Home Premium 64-Bit edition and I am trying to find the drivers for Bluetooth sync.
     I am using a Palm Tungsten E2 and the Palm OS 6.2 and with the computer I am currently using (Windows 7 Home Premuim 64-Bit)  I sync via Bluetooth and never had any problems and want to keep it that way 
    WyreNut and several members did a lot of work when Windows 7 first came out and helped a lot fo people with synch issues.  I have searched the Forums and cannot find a link to where I can download the Bluetooth drivers so I can synch my Palm Pilot via Bluetooth to my new computer.
    If someone could kindly point me to where I can get the Bluetooth drivers I will be grateful.  Thanks so much.
    Hi, please clarify as it sounds like both your old and new computers are the same OS.
    As you know, the E2 has Bluetooth built-in.  There are no Bluetooth drivers to download.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Palm vx desktop on windows 7 32 bit

    Hello,
    I have installed PalmOne desktop ("PalmDesktopWin414EN (1).exe") on my laptop - windows 7 32-bit.
    However, I can't create a new user ("couldn't add user.. illegal user name.. user directory couldn't be created")  and unable to synch it.
    How can I solve the problem ?
    Thanks
    Post relates to: Palm Vx

    Hello dallaireluc and welcome to the Palm forums.
    The problem that you are running up against is that there is no 64-bit serial or USB driver.  You were able to sync with Vista because you were using a 32-bit operating system.
    You will have to export your data from Palm Desktop to a comma separated values (.csv) file and then import that data into another application.
    Alan G

  • M515 and Windows Vista 64 bit HotSync Issue

    Hi
    I have a M515 which I am unable to sync with a Windows Vista 64 bit machine using a USB cable. My computer does not have a IR port.
    Read thru several threads but did not find a solution for this problem for a 64 bit machine.
    Any help would be greatly appreciated.
    thanks in advance
    Post relates to: Palm m515

    Hello akashmedehrotra and welcome to the community.....
    Windows Vista 64 bit is only sync with a wireless connection.  Either Bluetooth or Infra Red.  The M515 does not have bluetooth, so you would have to purchase an IR Dongle and sync using Infra Red.  You won't be able to sync with the USB cable on your desktop.
    Colapop

  • Lifedrive and Windows 7/64 bit

    I have a lifedrive and try to synchronize under Windows 7/64 bit with bluetooth.
    Do I have a chance with Palm Desktop 4.14 or 6.2?
    I remember, for the liefedrive, it is necessary to install another software, to get it compatible. But I did not find the name of this software.
    Thank you for any help!
    Horst
    Post relates to: LifeDrive

    Hello  Horst,
    The LifeDrive's Drive Mode desktop management software does not work with Windows 7.  You should be able to synchronize the LifeDrive with your PC over Bluetooth.  My guess is that Palm Desktop 6.2.2 is the better way to go over 4.x.
    You will want to take a look at this thread for more details on the HotSync options for Windows 7.
    Alan G

Maybe you are looking for