PALM TREO 750 - Touch screen probelm

i think my palm treo 750 is having hardware problems wiht the touch screen..is there any way that i can bypass the touch screen and the remaining phone work as regular phone...i have tried hard reset but it didnt resolved the problem
Post relates to: Treo 750 (AT&T)

Have you tried to calibrate the touchscreen?
1 Press Start and select Settings.2 Select the System tab, and then selectScreen .3 On the General tab, select AlignScreen.4 Tap the screen where indicated.5 Press OK . 
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/treo/treo750att/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705

Similar Messages

  • Unlock my Palm treo 750 ATT

    Can you please help me obtain the unlock code for my Palm Treo 750 from ATT. Here is the meid number <number removed by Moderator>
    I would appreciate help me. Im visiting from out of town and my T mobile my touch g4 fell and shattered . My friend has the Palm Treo 750 he will let me use. ATT did give me code for an old blackberry. They said they didnt have code for the palm treo 750.  Please help if you can. ]
    Junior
    Not sure how this works. Not sure to leave my email do to spamming. Please advise further instuctions. Thanks
    Post relates to: Treo 750 (AT&T)
    This question was solved.
    View Solution.

    Neither Palm, nor any of us volunteers here can help you unlock a phone - this can only be done from the carrier!
    You will have to call AT&T to get the code.
    (I've removed the IMEI number from your post to prevent others from copying it)
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • Palm treo 750 os required

    i have a palm treo 750 unlocked 
    recently i updated it to windows mobile 6.5 
    and i am in problems with it
    i want to reset it to wm6
    pl send me the original os link

    1. There was never an *official* WM 6.5 update for any Treos.
    2. Have you tried a hard reset?
    3. Are you sure its the OS, not an application?
    4. I see disclaimers left and right on hacking-related apps, sites, etc.
    5. Try the 750's Palm support page, maybe an update will help.
    webosnation.com is another option for help.

  • How can I transfer my photos and videos from Palm Treo 750 to iMac OS X 10.9.5?

    My old Palm Treo 750 which does not have any service has very special photos and videos I would like to put on my iMac OS X 10.9.5. I plugged the phone into the USB adapter and the phone is not recognized. Can anyone give me direction?

    Your phone is in recovery mode. You won't be able to get anything off of it until you get it out of recovery mode. Try this:
    http://jaxov.com/2010/05/recboot-iphone-recovery-mode/
    If that doesn't work, you have no choice but to restore the phone. But, you'll lose all data on the phone going that route.

  • Palm Treo 750; Cingular mobile transferring to Airtel (India)

    I have a Palm Treo 750, which is supposedly unlocked and I was using it in US with Cingular now Back in India when I try to configure with Airtel. Internet is NOT working
    Can someone please help me on this
    Post relates to: Treo 750 (Cingular)

    I am not familiar with your provider, but it's possible that the "modem" settings need to be changed. If you go to Start > Settings > Connections tab > Connections, and click Manage Existing Connections, can you match the device settings with the settings from your provider? (Note: that is based on WinMo 6.1, so your menus may vary.)

  • Palm treo 750 will not pair with Motorola H500

    I followed all directions and the Palm recognized it but refused the passkey (0000) which was in the instructions.  Now it won't recognize the device at all.  Help!
    Post relates to: Treo 750 (AT&T)

    I have no other Bluetooth devices at all and nothing will pair with it and I followed the directions to the letter as have several other knowledgeable people, one being the AT&T tech in the store.  You say the connection is locked to the last device paired.  Is it possible that it's locked on the device even though the passkey didn't work?  Can it be in some kind of limbo - recognized but not paired and the connection is locked?  I don't know all the technology about that - but something happened when I tried to pair it the first time - it recognized it just fine and then rejected the passkey and it won't pair with anything, even a Palm earpiece. Of course, if that were the case, any of the 3 master resets I have performed should have cleared that huh? There are no devices listed and both devices are fully charged.  The ebayer who sold me the phone is willing to let me return it so if you have any other ideas, please let me know.  Thanks.
    Post relates to: Treo 750 (AT&T)
    Message Edited by sbb2647 on 10-03-2008 04:40 PM

  • Palm Z22 frozen touch screen

    Hi -- I can turn on my Palm Z22, I can reset it, i can use the buttons, but the touch screen doesn't work at all.  Does anyone know a fix for this?
    Thanks,
    Betsy
    Post relates to: Palm Z22

    To add to this.....I just performed a hard reset and after confirming that I wanted to delete all data, it then asked me to "Tap the center of the target" with the stylus.  The target just keeps alternating between top left corner and bottom right corner in an endless loop and won't leave that screen no matter how many times I tap the target.  Is my Z22 gone for good?
    Thanks for any help.
    Betsy

  • Unable to open / view Hotmail Email attachments - Palm Treo 750 Windows Mobile 6 Professional

    I recently upgraded the Operating system to Windows Mobile 6 Professional. 
    To access personal Email I select Start and  Internet Explorer.  My homepage is: http://home.mobile.msn.com
    I select Hotmail and my Inbox opens listing my Emails.  The address is http://mobile.live.com/hm/folder
    After I open one of the Email messages I see the text.  I select view header and I get: This message contains attachments followed by the file name (ie: filesname.doc)  I cannot click on the filename.  How do I open / view the attachments?
    Post relates to: Palm TX
    Post relates to: Palm TX

    HI, I bought a used Treo 750 adn on it i am able to use Msn and therefore get my hotmail BUT am unable o brosw thorugh IE or send/recive MMS. Tried browisng and MMSing on other set it works. So my Cellualr agent told me to get the software re installed I mean Updated version of Windows .  Mine has windows 5.0. So where do i get this newwer version? Do i just downlaod from teh internet ?can you pls guie since you have already installed it.
    Thanks.
    Nas
    Post relates to: Treo 750 (AT&T)

  • Activsync 2 Palm Treo 750 to 1 computer IS THIS SUPPOSED TO WORK ?

    Is it possible to have 2 palm treo's 750 to sync to the 1 computer.
    Origanly I wanted to have two Smartphones that would sync between 2 computers for myself and my wife but this is not possible as the data allways gets stuffed up or duplicated.
    Now I can not even have one PC for the 2 Palm Trio's as the data integrity is not there and things go missing or get doubled up and the sync time can run for anything up to 3 hours before it can finish syncing.
    Or are Palm's only to be used as 1 PALM to 1 PC ONLY ?????
    Regards,
    David
    Post relates to: Treo 750 (AT&T)

    Sync issues Outlook 2007 running Windows XP Pro. Service Pack 3.
    1.  A lot of times when syncing it will duplicate contacts, not all of them just some about 40% to 60%.
    2.  When syncing the two handhelds we found that in the Calendar a lot of appointments / Meeting times were just disappearing
    3.  Sync time can very between 15 Min and 4 hours or more usually I just get sick of it and take it out of the cradle and try again the next day.
    I have even removed all data and started from scratch but it still made no diffrence.
    This has been going on for the last 16 mouths.
    I thought that Palm were better than this
    Post relates to: Treo 750 (AT&T)

  • Sending/receiving Googlemail from my Palm Treo 750

    Hi folks
    Some months ago I set my Treo to connect to my Googlemail account.  For a time it sent and received emails happily.  Then it stopped receiving Googlemail (despite the fact that, logging on at a PC, I could see that there were a number of new emails in my account) and more recently my Treo now chokes when I try to send emails on my Googlemail account (when I log on to my account on a PC I can see the email in my Inbox having been "returned" with a "fatal error").
    Any help and advice to rectify things would be gratefully received.
    Thanks
    Post relates to: Treo 750 (Cingular)

    Have you done a soft reset to your device recently? If you have not try that if that does not work have you removed the account and reset it up on the device?

  • Prolem using palm treo 750 browser frizing

    Good morning ,  i have  a problem and i really do not know what to do. i cannot open web pages. when i do this the phone freez itself and i have to remove the battery to start again. what i have to do?
    Post relates to: Treo 750 (Cingular)

    Probably time to get a backup program and back up your device and then do a hard reset.  There's http://www.spritesoftware.com/products/sprite-backup/full-edition Sprite Backup, http://spbsoftwarehouse.com/pocketpc-software/backup/ SPB Backup, http://www.resco.net/pocketpc/backup/ Resco Backup.
    I use Sprite myself.  A good idea is then create a backup of the essential apps you MUST have so that you can always restore that backup and be working asap.
    Message Edited by maceyr on 04-11-2009 01:38 PM

  • Touch screen in not working even after Hard Reset

    My Palm Treo 750 stopped working and responding suddenly........i tried a soft rest which didn't worked i then tried hard reset but in both cases the device boots and screen pops up "Tap the Screen to Start The Device". However this is the point where my device  hangs up even after resetting it several times. I have also downloaded reset software from the palm website but unfortunately it only runs/works from palm device. i have installed microsoft active sync from the palm CD and my device is detected and syncronized using USB cable which prbably shows it doesnot have a hardware issue.  
    Post relates to: Treo 750 (AT&T)

    Remove any screen protecters or cases, then hard reset again. If the problem continues then it will need to be repaired or replaced. 
    Post relates to: None

  • ActiveSync won't detect my Treo 750

    Help!!
    I started with Windows Mobile 5 before with Activesync 4.2 and it worked just fine.
    a year ago, I updated my palm with WM 6 and Activesync 4.5 and it worked just fine.
    Recently, I have got new laptop from my company and try to re-install activesync.
    During the process, I accidentally deleted the connection in my palm and everything is gone!!!
    I tried to install activesync 4.5 in my new laptop and try to connect them, however, activesync won't detect my device.  It did not even charge my mobile.
    Curious enough, I tried to connect it with my other laptop at home (using Activesync 4.5) and it did not detect the device as well.  Running out of idea, I removed Activesync in my home laptop and install Activesync 4.2. Try to connect and it worked!!! However, an error message came out saying that I need to have ActiveSync 4.5 to synchronize with WM 6.
    I uninstall the ActiveSync 4.2 and install 4.5 in the laptop and try to synchronize again.  But this time, same situation happens again where Activesync did not recognize my device!!!
    What to do, I am running out of idea.  Help me please...
    Michael
    Post relates to: Treo 750 (AT&T)

    I went through all the recommended steps I found online and spent 2 hours with palm support and 1 hour with Dell support and still was unable to connect my att palm treo 750 using activesync when I had successfully done so in the past.  I am using a treo 750 with winmobile 5 ver and activesync 4.2  connecting to win XP pro. I would see the phone in my device manager but it would not connect. This is what I discovered that fixed my problem and not just on my Dell computer but another computer I have as well. I would go into the phone to  Start/Settings/Connections Tab and found USB to PC and check the box to allow advanced connections. I would then remove the battery. unplug the USB cable and reinstall the battery. After phone boot up, plug usb in and attempt connection again and it would fail. Again open on the phone the  Start/Settings/Connections Tab and found USB to PC and uncheck the box to allow advanced connections. If connection fails (it probably will) pull battery from phone and unplug USB. reinstall battery to reboot phone then plug the USB cable back in. My device would again connect.. This needs to be done every once in a while because of the buggy phone and/or activesync software. I hope this helps anyone and prevents them from wasting as much time as I have on keeping an otherwise good phone in sync with an xp computer. Peace and long live a free internet and quality software....

  • Treo 750 with windows mobile 5 and windows 7 compatability

     Help please. Can I get a update/download from microsoft for the windows 5 mobile o/s on my treo 750.  To make it compatible with windows 7 ?
    Post relates to: Treo 750 (AT&T)

    Hello everyone. I apologize for reusing this very old post but I got my hands on an old Palm Treo 750 with Windows Mobile 6 working properly but I could by no way get it synchronized via usb with my Windows 7 laptop. I tried the suggested solution but still I get the Device not recognized from the windows installer- Colud you please somehow help me? Many thanks
    P.S. I downloaded the program from the link but when launching it as admin nothing happen...

Maybe you are looking for

  • Hp aio remote app on iPhone won't scan to my hp photosmart 7515

    hp aio remote app "there was a problem during scanning. check scanner and try again" when using hp photosmart 7515 however this is a new issue the app scanning worked before. Also I can no longer print or scan unless at home and connected to my netwo

  • Copy standard BAPi

    Can anybody send me the step by step procedure for copy the standard bapi , i copied the bapi , but its no coping all the incules and function modules , when iam tyring to copy those its error.. pls any help me abt this pls.. Regards, pandu

  • Changing standard Validation Error Messages

    Hi All, Does anyone know how to change the standard SAP-messages like: Decimal value 100 is too large for totalDigits 4 or: Accuracy 3 exceeds fractionDigits 2 Thanks, Jeschael

  • Actual estimate for the Freight Charge

    Hi All, We have a requirement to estimate the freight charge while entering the order itself, whereas the actual freight comes at the time of pick release which takes place in a third party syatem. This goes like below: Customer Service gets a call f

  • HT1688 how to delete my emal from my apple iphone

    how do i get my email off of my phone that im not using but it is conected to my oter one