Palm Tungsten E2 hotsync with windows 8 Software download loctation

Were can I download software for my computer for my Tungsten E2

Hello, and Welcome to the HP Support Community! Have you read the first post at the top of the list? WyreNut

Similar Messages

Is Palm Tungten C compatible with Windows 7?

Is Palm Tungsten C compatible w/Windows 7? If so, where can i find a download link for Palm Tungsten C?
This question was solved.
View Solution.

Lynmaws, welcome to the forum.
I am not certain exactly what you want to know. If you mean will the "Tungsten C" sync with Windows, the answer is yes.
Here is some software that may do what you need.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Hotsync with Windows XP without using Outlook?

Can I Hotsync with Windows XP and use a program other than Outlook. I am using my old M100, thanks.
Post relates to: Palm m100

Hi,
I am brand new to this...bought an m100 at a garage sale...trying to use it on my windows xp...so I bought a trendnet usb to serial converter and set it up...i try to hotsync and it says "the connection between your handheld computer and the desktop could not be established. Please check your setup and try again". At one point, COM4 was the port that was being used on local, but now it's saying that COM1 isn't available. I don't know what i'm doing. I just want to put some text into this device that i currently have stored in WORD on my PC. Can someone help me in very simple terms? I don't understand any of this lingo.

Can't get Palm Zire to work with windows 7

Can't get palm zire to work with windows
Post relates to: Palm Pilot

Please review the "stickied" threads near the top of this board, about syncing with Windows 7 and Vista. It's all there.
After you've been through and tried everything there is to try, and still have problems, please post back with specific info about exactly what you've tried, what version of Windows 7 you have (32-bit or 64-bit), etc.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Windows 7 Software downloaded with SDM but won't launch....

Windows 7 software downloaded without a hitch. The launch button is there but no amount of clicking can get the program to launch. Help please.

Hi,
Which software did you download? Where did you download this software?
Please try launching this software in compatibility mode.
http://www.sevenforums.com/tutorials/316-compatibility-mode.html
Note Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Andy Altmann
TechNet Community Support

TS1717 Trying to download iTunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

Sounds like you somehow got the mac version.
Download the windows 6.7 camera raw update from this link:
Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

Unable to Install Universal Wireless Keyboard with the CD that came with the Palm Tungsten E2 on my Windows Vista OS. Can some help? Would Appreciate it very much.

I recently bought a Palm Tungsten E2. I have been unable to install the Universal Wireless Keyboard software that came with the E2. Went online and downloaded the version 1.13 UWK and that would not install either. What did I do wrong?
Post relates to: Tungsten E2

For Vista that version will not let you install programs. Good news though is we have a version you can. Go here, http://www.palm.com/us/support/downloads/windesk62.html and install this on top of the version you already have. There is going to be a few changes on the desktop, there is no quick install, but the install tool.
Once you have that done just double click on keyboard and it will ask you your hotsync name and sync and your done.
Oh as a side note the check if this is your solution is only if the answer solves your original question.
Message back if you have more question or need more help
Post relates to: Palm Z22

Palm m500 Hotsync with Windows 7 Home Basic - 32 bit

I have a couple of old, but ever so useful, Palm m500/m505 PDAs, which I could hot-sync with my old PC running on Windows XP. Now I have up-graded to PC with Windows 7 Home Version - 32 bit and am at my wit's end trying to hot sync my PDA data on to my PC Palm Desktop.
I tried hot-syncing by installing Palm Desktop 4.1.4. and Palm 6.2. Have both on my PC. It did do a hot-sync but only to back-up data. I need to view the data on my PC/Monitor.
As I am of the older generation, (a senior citizen), could an expert give me step-by-step simple instructions on how to resolve my problem. My Palm m500 PDA has too many contacts to manually transfer.
Also can I convert PDA contacts to Outlook Address Book and then hot-sync with Palm m500 series PDA ?
Waiting anxiously for help and guidance ..........
Myra

You can give this a try if you havent done it yet...
How to import the Address Book from Palm Desktop to Outlook
You may need to install this too if it is Outlook 2007
Outlook 2007 Update (Windows installer) for Palm OS
For other outlook versions download from this link:
Downloads
There is another post that said you may be able to transfer it using the Infrared feature in the device.
Check POST
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Palm T/X Sync with Windows Vista - 64 processor

I have a Palm T/X handheld and recently purchased a new computer that has Windows Vista operating system and a 64-bit processor. I tried to download the software that would allow me to HotSync my T/X with Windows Vista, but apparently this does not work with a 64-bit processor. Is Palm going to provide that software download soon, or if not, how do I get around this issue? Thanks
Post relates to: Palm TX

I have not yet heard of any compatible software for the 64-bit but I have seen some solutions and ideas that might be helpful to you. Read through this thread and see if you find the information helpful!
Good Luck!
Post relates to: Tungsten E2

Hotsync with windows XP Home

My Tungsten E2 has stopped hotsyncing with my windows XP computer. It worked fine for several months and now I get the message "The connection between you device and the desktop could not be established. Pelease check your setup and try again." I have two hotsync cables and have tried both. I have tried a soft reset and that did not solve the problem. I have also tried two different computers and it doesn't work with either, though it used to.
Post relates to: Tungsten E2

A good place to start would be the hotsync troubleshooter guide you can find it here http://kb.palm.com solution id 2630
Post relates to: Centro (Sprint)

What is best solution for using a Palm Tungsten 2 on a Windows 7 computer?

Driven by the end of XP, I purchased an HP Z230 Workstation running Windows 7 Professional.   I'd like to get my Palm Tungsten 2 working, and I've heard several options here on doing that.
OPTIONS
A. Use Palm Desktop 6.2 with Bluetooth for hotsync. (I've done this already with a Win7 laptop, but I use the Note Pad utility a lot with some macros, which unfortunately is not supported on Desktop v6.2).
B. Use Palm Desktop 4.1.4 in a virtual Windows XP environment running under Win 7. I know I can do that, and that is probably my fallback. However, Microsoft suggests that you disconnect from the Internet any time you use the Virtual XP, because it may be susceptible to hacking since they don't support XP anymore.   So that will be an added nuisance that I will probably forget to do.
C. Use the Aceeca USB driver to make Desktop 4.1.4 work.  I tried following the instructions here to do that, but when Hotsync fails, it never shows up as a yellow triangle in the device manager list, even after I followed the trick to make hidden devices visible. So I have not been able to even try the Aceeca driver with Palm 4.1.4 yet.
D. Install the Aceeca Desktop 4.1 and update to their driver. I could try this (uninstall Palm 4.1.4 and install Aceeca 4.1) but it looks like it depends on the same process to update the driver as my option C just above. So I'm thinking I may run into the same roadblock as C.
Questions:
Does anyone have any other ideas of how to get the Aceeca driver hooked up to Palm Desktop 4.1.4 that I could try?
Does anyone know if Aceeca Desktop supports the Note Pad facility if I try option D?
Thanks in advance for your help.
Terry
This question was solved.
View Solution.

Palm Blue,
Thanks for weighing in!
Here is what I know so far.   I use the Palm Desktop 4.1 on my Win XP computer, and have no problems syncing my Tungsten T2 with USB Hotsyncs.
I've also successfully hotsynced the T2 to a Win7 Pro laptop computer using Palm Desktop 6.2. and Bluetooth.
My goal, which sounds like you have already accomplished, is to install Palm Desktop 4.1.4 on my new Win7 Pro desktop, so that I can sync with the T2 and get the Note Pad functionality also.   This is like my "OPTION C."
Did you have to use the Aceeca driver to make this work on your computer, or were you able to do it with the Palm driver? One other person reported elsewhere having gotten 4.1.4 working on a 64 bit Win7 installation, and he made no mention of the Aceeca driver.  I have not been able to contact him.
In response to your question about what I see when I try to sync:
Palm 4.1.4 is installed on the Win7 Pro desktop, and the hotsync icon is present.
When I try to sync, I hear the characteristic tone indicating that a USB device is recognized. But I also get a message that pops up near it with the yellow triangle and the following text:
"USB DEVICE NOT RECOGNIZED"
"One of the USB devices attached to this computer has
malfunctioned, and Windows does not recognize it.
For assistance in solving this problem, click this
message."
If I click the message, I get popup window that says,
One of the devices attached to this comptuer has malfunctioned and Windows does not recognize it."
It then shows a list of the USB devices inside of one of the USB Root Hubs, and one of them has a different icon and a question mark in that icon (not a yellow triangle). And its description is in bold and it says "Unknown USB Device."
I also looked at the Device Manager during a hotsync to see if it shows a Palm device or an Other category.   Using my XP computer first with the Tungsten T2, and which also syncs okay, it is true that during the Hotsync, the Device Manager adds a device "Palm OS Handheld Device / Palm Handheld," that goes away as soon as the hotsync is complete.
Using the same Palm Tungsten 2, when I attempt the Hotsync in the Win7Pro computer, "Palm OS Handheld Device/Palm Handheld"  does NOT appear in the Device Manager (nor anything else like it).
So for some reason, my computer does not have seem to have enough of the Palm Desktop/Hotsync installation complete that I can get to the point of either it working, or where I could try to install the Aceeca driver.
I keep trying things to get it to work, but so far now luck. Looking for more ideas to try.
Terry

Can't find palm tungsten isync hotsync conduit in leopard

Attempting to sync my Palm Tungsten E2 with iCal & Address Book by USB but iSync can't set up when I attempt to Enable Palm Syncing. iSync Hotsync Conduit does not install and is not found on searching with Spotlight. Palm Hotsync works fine. Where is my software not configured properly?

Problem solved. I was logged into a User Account that did not have permissions to move the conduits to a new folder 'iSync Disabled Conduits'. Logging into the System Manager Account enabled this process to proceed and reverting back to the sub-account the configuring for Enable Palm Syncing process now completed.

Palm Tungsten E2 driver for windows 7 64 bit

I just bought a new computer with Windows 7 64 bit built-in.
However, I can't synchronize my palm with my new computer
because of the wrong drier. Can anybody tell me where to
download the driver for Palm Tungsten E2 for Windows 7 64 bit?
Thanks a lot!!!

Hi, and welcome to the Palm Support Community.
There are no 64-bit USB drivers for any version of Windows. You are limited to Bluetooth or IR sync with the E2.
Suggest you peruse the Windows Hotsync board for many threads on the subject.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Unable to HotSync with Windows 7 (64bit)

I wonder if anyone has had any success of using hotsync with a Palm Z22 (handheld). I do not have bluetooth on this laptop, only wireless. The error message is that I am missing a hotsync driver. I called Palm and was told that Windows 7 does not support hotsync. Any suggestions? Thanks.
Alice [email protected]

Folks, did you read the post about getting a "Bluetooth Dongle"? Walmart.com has them for as little as $15 US. This easily adds BlueTooth capability to any computer via a tiny device that attaches to a USB port.
Palm is not going backwards - it has discontinued PalmOS devices quite some time ago, and has moved forwards to webOS!
Workarounds have been offered here in this forum. You can choose to follow them or not, your choice.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Palm Tungsten E2 hotsync with windows 8 Software download loctation

Similar Messages

Maybe you are looking for