Palm Tungsten E2 screen is fading, screen resolution changed

Since yesterday, the screen of my Palm Tungsten E2 is fading out, I have hard time to see the Apps on the screen and the writting on Memo or any Apps, all pictures on media are blurry, it's like the screen resolution has changed, even the introduction Palm 1st screen is un-readable, blurry.
Thank you for any help if there is any.

Hi and welcome to the HP Support Community.
It doesn't sound like it, but maybe the screen brightness changed somehow. Tap the brightness icon (the little "sun" looking icon in the top right corner of the graffiti area) and adjust the brightness.
Assuming that does nothing, try a soft reset by pressing the Reset button on the back of the device.
As a last resort, you could try a Hard Reset (after making sure you have a backup of everything).
But your description suggests a hardware issue. You could contact Chris Short at palmdr.com who repairs Palm devices and sells refurbished ones on eBay.
Good luck, hope this helped some.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Similar Messages

Palm Tungsten - Screen Digitizer

No device
I have a Palm Tungsten PDA. I have not used it in three years. Recently I charged the battery and tried to operate it. It asks me to tap a bullseye circle to set the screen digitizer. It will not accept a tap anywhere on the screen. The reset button also does not work. How can I get beyond this and to some old contacts stored inside?

There is a multi-page thread "stickied" at the top of this board which covers pretty much every cause and fix of digitizer issues:
http://forums.hpwebos.com/t5/Palm-OS-WinMo-Hardware-and/Resolving-Digitizer-Touchscreen-issues/td-p/...
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

After upgrade to xorg screen/serverlayout / cannot force resolution

I finally got around to doing an update on my living room server/TV box after about six months of no updates. After the upgrade, Xorg is now ignoring my monitor/screen settings and coming up at 1920x1080 instead of my preferred resolution of 1360x768.
/etc/X11/xorg.conf.d/20-intelmonitor.conf:
Section "Monitor"
Identifier "HDMI3"
Option "PreferredMode" "1360x768"
EndSection
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
EndSection
Section "Screen"
Identifier "bigscreen"
Monitor "HDMI3"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 1360 768
EndSubSection
Device "Intel Graphics"
EndSection
Section "ServerLayout"
Identifier "biglayout"
Screen "bigscreen"
EndSection
xrandr:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
1360x768 60.0 +
1920x1080 60.0*+ 30.0 24.0
1920x1080i 60.1
1600x1200 60.0
1680x1050 59.9
1280x1024 75.0 60.0
1440x900 75.0 59.9
1280x960 60.0
1280x800 59.9
1152x864 75.0
1280x720 60.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3
720x480 59.9
640x480 72.8 75.0 66.7 60.0
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
Before the updating this was producing a nice 1360x768 resolution for me. I use fluxbox so no other desktop WM interactions taking place.
Here's my current Xorg log (no old ones saved, rolled over before I thought to save one):
[ 2993.973] (II) intel(0): Output VGA1 using monitor section HDMI3
[ 2993.973] (**) intel(0): Option "PreferredMode" "1360x768"
[ 2993.973] (II) intel(0): Output HDMI1 has no monitor section
[ 2993.973] (II) intel(0): Output DP1 has no monitor section
[ 2993.973] (II) intel(0): Output HDMI2 has no monitor section
[ 2993.973] (II) intel(0): Output HDMI3 using monitor section HDMI3
[ 2993.973] (II) intel(0): Output DP2 has no monitor section
[ 2993.973] (II) intel(0): Output DP3 has no monitor section
[ 2993.973] (--) intel(0): Output HDMI3 using initial mode 1920x1080 on pipe 0
Full log file here
I can see that the HDMI3 output is grabbing the monitor definition, but it goes to 1920x1080 anyways.
I've been trying a lot of different approaches but I get the impression that I'm missing something completely. Also, I know that you can force a resolution change with xrandr but when I do that it doesn't scale the screen correctly, moves my conker way off and generally doesn't look right.

Restart, holding down the CMD+R keys, and reinstall Lion.

Facebook screen resolution changes automatically everytime on Mozilla Firefox 4. Other websites opens fine.

I have recently updated to Firefox 4. I am having many problems with this version.
I am unable to use Facebook properly. The Facebook screen resolution changes every time automatically. The screen resolution gets very big.
When I open the FB site the resolution will be fine as soon I open another tab to check other website and roll back to the FB tab the screen resolution gets big and can't get back to normal view.
I have to close the FB tab and open a new tab to put the FB URL to use it. When I try to view other tabs and then open the FB tab the screen resolution is changed.
I have problem with only FB on Firefox 4, other websites are working fine.
I also tried opening FB on IE8 and Chrome. Their the site is opening normal. Have no issues with their browsers. I spotted it to be a problem with Firefox 4 and also the IDM (Internet Download Manager) doesn't work on the FF4 where it used to work on the earlier version of FF.
Do something about the IDM integration with FF4 to download FLV,MP4 videos from YouTube and other websites.
There is no "Go back to multiple pages" button in a FF4 tab. It only allows us to go back to the previous page. If I have open 10 pages in a single tab then I have to click the back button 10 TIMES to open the last (10th page) but in the previous FF3 there is a facility to view all the pages in a drop down which the current version of FF4 doesn't have :-( I am using Windows XP 2 Professional 32-bit and owner of the computer.
Please fix the issues asap else I have to move back to the earlier version or have to shift to some other browser :
Here goes the screenshots :
http://i55.tinypic.com/2s8s8c6.jpg
http://i51.tinypic.com/j7vynq.jpg
http://i55.tinypic.com/1yuwbq.jpg

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Screen resolution changes after opening PDF in preview and is enlarged.

Screen resolution changes after opening PDF in Preview and is enlarged.

Do a backup.
Quit Preview.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Remove the following. You may not find them all.
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Credit Linc Davis for this solution.

Reader XI has the print button off the screen when on 800x600 resolution

Reader XI has the print button off the screen when on 800x600 resolution as well, how to fix without changing resolution? A user needs the resolution set to that for her eyes.
I see that this was an issue in Reader X and update 10.1.3 resolved it. What was the fix?

The scrollbar appears and works but unfortunately the dialog size is still too big therefore the print button ends up being hidden by the windows taskbar. Could you please make sure that the print dialog size is calculated against the work area (desktop size minus the taskbar, there's a win32 API to get that) rather than the whole desktop to fix the issue?
That would also fix another issue: when the taskbar is sized higher than usual whatever the resolution you have it could still end up covering the print buttons but if you calculate against the work area rather than the desktop area that issue would be fixed as well.
Please don't leave it unfixed because even if the requirements say 1024x768 if you have higher DPI settings or have a taskbar with a non-default size the print button could easily become unreacheable.

Screen resolution changes every time I open I-Tunes

The screen resolution changes when I open I-Tunes. I have to go into control panel every-time to adjust the resolution to make the print and screen layout small enough so its entirety is captured which then allows me to use I-Tunes. Otherwise the graphics are too large to be captured on the screen making the program unusable.

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Screen resolution changed upon awake; old resolution no longer available

My new MSI Z97 i7 mobo based Windows TP woke from sleep this morning, with the resolution changed to 1024x768.
When I went to change it back to 1920x1200, that resolution is not available; only 1920x1024, and the screen looks odd. Unless advised otherwise, I will try to re-install the display drivers that came w/ the mobo, to get the display correct again. Otherwise,
really liking Win10

Hello Giggirock,
Firstly, i would take the display and conect it to another machine. See if you can achieve this resolution with another computer. If the same problem occurs, i would say its the controller board on the LCD. if the resolution was there(on the other computer) then u may have a problem with the video card in your computer.
try this out, and let me know how you go
Cheers
Bryza_Bone

Spontaneous screen resolution change

I am running OS X Maverick since a few days.
If I don't use my system, the screen "goes to sleep" after 10 min. (like I always had).
Since the OS X upgrade I have the problem that my screen resolution changes to 800 * 600 after when I "rewake" the screen (by pressing a key).
When I look in the system preferences, the screen resolution is set to "best for my screen"
I have to change it manually to the original setting (1280 * 960)
Error in the screendriver????

Hello viharij,
Where do you download the Windows enterprise?
Please download from the following link.
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-8-1-enterprise
About how to change the screen resolution, please refer to the following article.
http://windows.microsoft.com/en-HK/windows-8/get-best-display-monitor
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Aperture Library in "Desktop & Screen Saver" now, but resolution off

My Aperture library now show up in Media Browser and Desktop & Screen Saver, but the resolution of images, particularly when selecting them for desktop backgrounds are too low. I'm not getting the full resolution images. Any idea what the deal is? Do I need to reprocess something?

Bobio,
The pictures you see for selection in Desktop and Screen Saver from from the *Media Browser*. It is the same mechanism you use for sharing pictures with any application on your machine.
If Aperture photos are not available there, you probably have previews turned off. Look in the Aperture Preferences for that. However, previews are not automatically generated until you quit Aperture. I.e., Aperture does not spend time making your photos available for other applications when it knows you are using Aperture.
If neither of those ideas pans out, I would suggest following the [Troubleshooting Basics|http://support.apple.com/kb/HT3805].
nathan

Displaying remote panel on different screens with different screen resolution

Hi
I am running a vi on the PXI . But when i try to open the remote panel it gets shifted on different screens
with different screen resolution. I have tried to set the windows run time position using the vi properies
but to no avail. Can anyone help me on this issue??????
Regards
Amit Ahuja

What is your lv version?

Restart GKrellm on screen resolution change in KDE

Hi all!
Any trusty GKrellm wizards still out there? Or KDE mastahs?
I much prefer GKrellm and dockapps for my system monitor needs and currently use the former as a panel in the top right corner on my KDE 4.5 desktop. It works great except for screen resolution changes where switching from larger to smaller resolutions and vice versa breaks the alignment to the right border of the screen.
My question is if there is a lean way, either through GKrellm, KDE or even bash/d-bus or similar to restart GKrellm (which is fast and good enough a solution for me) when I change resolution? Any ideas?
I wish KDE had as an option for "on resolution change, execute X". Come to think of it, I would like KDE to offer this option for power management state switches as well. Hmm, perhaps there should be a generalized "state-based" daemon for launching arbitrary external commands in KDE much like the tools available on Android phones these days, like Tasker, Locale and Setting Profiles...

No hints for how to do this? What about in Gnome?

Elements 11 organizer shows correct wb in thumbnails but when increased to full screen or in slide show changes white balance to tungsten

Elements 11 organizer shows correct white balance in thumbnails but when increased to full screen or in slide show changes white balance to tungsten. Photos where shot in raw and in auto or flash white balance. any suggestions out there?

Figured it out, if the raw default setting has the wb on 3000 (or tungsten) the slide show uses adobe raw to convert so they all showed blue LOL

Parts of screen appear faded immediately after awakening phone

When I first "awaken" my iPhone from sleep, two vertical bars appear on the unlock screen, near the edge of the phone. On both sides of the battery level indicator when charging. I tried pressing the sleep button a few times very quickly - and this makes the issue even more apparent - a full rectangle (with the edges being the faded screen area) is apparent. The issue resolves itself in a fraction of a second - I can see the color "filling in" the faded area.
Just got this phone as a replacement from a defective iPhone, and haven't seen this problem before.
Is it a defective LCD? Something that could get worse with time? Something that would affect image quality? Its just something that is pretty annoying to see..
Anyone else experienced this?
Thanks!

I should add, although this is pretty obvious, this issue isn't apparent if the background is white, but very noticeable if any other color.
Message was edited by: M_99

Programmatically change screen orientation and/or resolution?

We don't have VB.NET available and I was wondering if it is possible to create VBA code that would change:
1) screen orientation (and maybe resolution)
2) on a specific monitor (in a multiple monitor setup; we have two)
The idea would be to put it into an Excel workbook and have the macro autorun then exit.
I see examples for C#.Net but can't find any for VBA. Maybe it's not possible. Your comments are appreciated. Thanks.
Edit: ANY MS Office application can be used as long as it can be used via a shortcut on the desktop and run automatically. "One click and done" is the idea.

Hello Doug,
I believe you can use Windows API functions to get the job done.
Anyway, the current forum is for Office Apps. I'd recommend asking VBA questions on the
General Office Development forum instead.

Palm Tungsten E2 screen is fading, screen resolution changed

Similar Messages

Maybe you are looking for