Palm TX: Bluetooth settings lost after soft reset

Hi all,
all my bluetooth settings get lost, when I perform a soft reset. Does anyone have a hint which files are getting deleted or "updated" from the ROM so I can restore them from a backup? Or do you perhaps have a solution so that the settings won't get deleted?
Thank you very much in advance!
Cheers!

I too have a problem with resets while using the Palm Bluetooth Keyboard 3245WW but i think my resets are only limited within Wordsmith when pressing the Delete/Del key. Try seeing if your problem is related to one particular key... though admitedly i use a T3 not a TX and i have read about others on the TX experiencing random resets. I am just wondering if it is tied to the Delete key like my problem.
My fix for my problem was to stuff some paper under the Delete key so i wont accedentally press it while typing.

Similar Messages

  • HT3728 after soft resetting how to set a new password to my airport express

    after soft resetting the airport exppress how to set a new password to my airport express

    Hello, MevanK.
    Thank you for the question.  You may find this article helpful in changing or creating a password for your AirPort Express. 
    AirPort Utility 6.x: Password-protect your wireless network
    http://support.apple.com/kb/PH5119
    Cheers,
    Jason H. 

  • Airport Extreme Freezes After Soft Reset

    Hi Everyone,
    I'm having an issue with the 7.5.2 firmware update for my Airport Extreme. We have several devices which use DHCP reservations and after updating to 7.5.2 I went in to change some of the IPs and other settings (using AirPort Utility). After making the changes I pressed update and the Airport started the reset, but the light just stays amber and I have no connectivity. I end up having to pull the plug and do a hard reset. After a hard reset, when I check the Airport, none of my changes went into effect.
    I have tried many times with different settings and it always does the same thing whenever I try to update the changes; it hangs during the soft reset without saving any changes. When I downgrade the firmware to 7.4.2, however, everything works perfectly.
    Any help would be appreciated. Thanks!

    I too have run into the same problem as ‘controls.freq’ although sometimes the light just stays amber (like controls.freq’s documented post) and other times it stays solid green after clicking "Update." No matter, the result is the same -- I have to perform a hard reset (pull the plug) of the Airport Extreme and none of my changes have been made. I not only run into this when trying to add static DHCP addresses (like controls.freq), but also when trying to add MAC addresses to timed access control lists, or (when playing around) trying to change my wireless network name .... honestly, it probably fails for many other changes too.
    So I tried what Bob suggested -- but no luck. A lot of effort but no reward. I tried loading 7.4 firmware (tried both 7.4.2 and 7.4.1 which ran more reliably in my environment) and then doing the factory reset, then upgrading to 7.5.2 and setting everything up. But after maybe one successful save of settings, all subsequent saves failed as described earlier. Then I tried a factory reset while running 7.5.2 and ran into the same problem after maybe the first successful save.
    The only reliable workaround is to DOWNGRADE to 7.4.x, make the necessary changes, and then upgrade again to 7.5.2. I must say ... if there were some way I could get the system to stop offering new code reliably (that doesn’t even work even when I tell it I don’t want to check for updates), then I’d just stay with 7.4.1 throughout the environment with success.

  • User Settings lost after session is released

    I am having a problem with the User settings being lost after the user logs off the system.
    menu settings, fields displayed in Marketing  Documents,  displayed User Defined fields and the
    sequence of User defined fields get lost after the session ends.  This does not happen to all users,
    just some users.  The users that keep losing their settings keep losing their settings,  the ones that do not have a
    problem seem never to have a problem.
    has anyone else experienced this problem and if so, how has it been resolved?
    Thanks in Advance!!!
    Dana

    Dana,
    You may check these threads first:
    change in form settings
    Re: Settings don't seem to "stick" after being added from the Form Setttings
    Re: 2007A PL42 and Windows Roaming Profiles
    Form settings not saving
    Thanks,
    Gordon

  • Restore after soft reset not working

    I'm hating my 5800 more and more by the day.
    I just did a soft reset in order to overcome the 'voice system error'.
    Then I did a restore of all the contacts, calender etc.
    What did it restore?
    NOTHING!
    Now what am I supposed to do?! Thanks again nokia...... 
    Nokia might know what they're doing with traditional 'mobile phones' but when it comes to smartphones they are clueless. 

    I went into 'applications' on the phone and did an update (of about 7 things)
    I then reapplied the restore and it's "working" now i.e. the contacts are back in place but it still gets the 'voice system error'
    however the stupid POS thing has seemingly lost all of the applications I installed
    again,
    THANKS NOKIA!

  • Pages, Numbers and Keynote are "waiting" even after soft reset

    the 3 apps first "greyed" on home screen, did the soft reset (pressed home + sleep buttons). they kept "greyed" after reset, and I can't even see them in Purchased in app store.  the only way I can open them is to search for them in app store, and tap open.

    Please don't type in all capital letters. It makes your post harder to read.
    Have you checked the Applications folder to see if the programs are there? If they are, drag them to Launchpad.

  • Iphone freezed after soft reset

    after a soft reset everytime i try to start iphone is freezed on apple logo. tried many times (home+sleep). nothing. any suggestion?

    Plug it into a mains charger for a few hours and then try Recovery Mode... http://support.apple.com/kb/HT1808

  • Bluetooth Connection lost after a few seconds - EV...

    Hey,
    I have an new Nokua Lumia 920. I want to connect my Lumia via Bluetooth to my laptop and in the university I treif to connect it to another laptop, as well as to my old XDA Touch Diamon!
    The problem: I can find all bluetooth devices and can also connect to them, BUT every connection is lost after about 5 seconds. This cannot be! Here are my firmware versions - are there issues?
    OS-version: 8.0.10211.204
    firmware-revision-version: 1232.5957.1308.0007
    hardware-revision-version: 1.0.0.0
    radio-software-version: 1.0.202093.3
    chip-SOC-Version: 8960
    I am located in germany. Anyone has a hint or solution - phone nearly useless to me without bluetooth.
    Best regards

    You do not have to be bluetooth connected to transfer files to and from the phone.
    Initiate the trandfer and it will happen. If they have been paired before, no passcode will be required.
    Theey won't keep a BT connection because none of the profiles the phone has requires one.

  • IPod won't turn on after Soft Reset?

    My 8GB iPod Touch has been lagging and glitching a lot lately. So I did a Soft Reset, and now the black screen with the little silver Apple logo is on there, and stayed there for 30 minutes. If I press any button, it'll go all white and restart the reset.
    Now I've waited for about an hour, and it won't turn on. Plus it won't connect to my iTunes if I plug it into my laptop.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • 8520 doesn't charge after soft reset

    Hello,
    My sister have a Curve 8520, she made a soft reset and now it doesn't finish charging, it gets to a little bit more than a half and it freeze there.

    open ur bb-battery,check if the pins which touch the battery are ok..or slightly/gently clean them with a dry and soft cloth.-happened with me(other model,make)...if this fails,plz visit the nearest bb service centre and get ur battery/cell checked.all da best
    Live long king size

  • E6-00 RESTARTING AFTER SOFT RESET AGAIN AGAIN . HE...

    HY THERE
    I HAVE NOKIA E6-00. I MADE SOFT RESET AND I GOT A PROB. MY PHONE GETTING RESTART AGAIN AGAIN PLZ HELP ME TO SOLVE THIS ISSU

    Is there a SIM card in the phone? Is there a SD card in the phone?
    How fast does it restart? Immediatly or do you have time to type anything?

  • Palm LifeDrive Died after Soft Reset

    I recently did a reset on my LifeDrive; but now I can not turn it on. while it's in the charger base the power icon shows orange like its charging; however it will not power on. does anyone know how to reset the battery or anything that will help will greatly be appreciated. Also while I place it in the charger base it always was recognized by my PC; Now however it does not even recognize it? any thoughts moderators, or anyone for that matter.
    Post relates to: LifeDrive

    It's possible the Hard Drive has failed on the device.  They were a bit fragile.
    If you've performed all the resets as mentioned above, then it may be a hardware failure.  Usedpdaparts.com offers a repair for $80 that removes the hard drive, and replaces it with a Compact Flash socket and 4GB memory card.  PalmOS is then reloaded on it, producing a better unit than what Palm made!
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Lost contacts info after soft reset

    Not a webOS question...
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    @md14
    Think that you will find Need for Speed, Galaxy on Fire and Real Golf 2011 in circulation.
    Happy to have helped forum with a Support Ratio = 42.5

  • Everything in "Purchased" is lost after PC  reset to factory settings.

    Does this mean I have to pay again? I hope not.

    Does this mean I have to pay again?
    For music and videos, yes, unless you can retrieve them from a backup, iPod, or similar device, or the iTunes Store staff tells you otherwise. Applications and books can be freely redownloaded.
    (57601)

  • All settings lost after startup

    hello,
    unfortunatly my pb keeps losing all settings(mailaccounts, bookmarks, dock etc.). after i set everthing as it was before it disappeared again.
    anyone knows what to do?
    thanks

    I sounds like you may be setting up prefs/settings for one account and logging on another account, but not quite. Any chance you lost, deleted, or misplaced your Home folder?
    Read the Apple kbase Article:
    http://docs.info.apple.com/article.html?artnum=302150
    Do you have file vault turned on?
    Joe

Maybe you are looking for

  • Is There A Way To Create A Simple File/Folder Tree...

    Hi, Please forgive me if this has already been covered but I have searched and found no answer... I am trying to create a web page to run on my local network, through iweb and apache, and have got everything I need working except this. I aim to be ab

  • My MacBook Pro suddenly started freezing. Getting error code -5010D. Any ideas?

    Yesterday I noticed my MacBook Pro started freezing up for a few seconds when doing easy tasks, like typing a FB message or browsing. It doesn't seem to be related to anything I'm actually doing, which makes me think it's a hardware problem. I can re

  • My ipod video wont play sound through the headphone jack or the bottom connector

    Hello everyone. I have an iPod Video 60GB (supports video output through the headphone jack). Which I believe was the last one before the iPod "classic". Anyways awhile back it stopped outputting sound through the headphone jack, I assumed I had dama

  • TS4268 I updated the 7.0 IOS Now I can not use my face time

    I updated to the 7.0 IOS but now when I try to use FaceTime it says Could not sign in. Please check your network connection and try again. I have tryed multiple wifi locations as well as not using wifi at all. Help

  • Iphone 6+ specs

    So, the iPhone 6+ screen is a 1920x1080 pixel screen (a 16:9 aspect ratio).  In all the camera modes (slo mo, time lapse, video etc), the camera takes a 16:9 aspect ratio.  So, the sensor is large enough to handle the full aspect ratio of the screen.