Palm tx connection to office network

Network folks have provided me with an eight digit wap key. I also have the esu update installed on my palm tx. Any ideas on how to configure for wifi connection?
Post relates to: Palm TX
This question was solved.
View Solution.

The TX support page has a link to setting up Wi-Fi (second link at the top of the page, I believe):
http://www.palm.com/us/support/tx/?prop5=handhelds&prop6=palm%20tx&events=event17&eVar2=handhelds
You might also want to use this stickied thread at the top of this board with a Wi-Fi checklist if you have trouble.
Post relates to: Centro (AT&T)
Message Edited by smkranz on 09-05-2008 10:36 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Similar Messages

UM175 - Not able to connect to office network with VPN

I am having trouble connecting to my office network using this wireless card, UM175, and connecting with a VPN. I have the VPN set up the same as many other computers connecting to our server. Currently when I start VZAccess, I can access the internet and everything works fine. When I start my VPN to connect to my office server, it takes multiple tries with error 691 being returned. After two or three tries it connects. I can ping my computer from the server. I can ping my router and my server from my notebook with the UM175. However, I cannot do anything with the server. I cannot access the internet, access files from the server, or access any software on the server. I contacted IT and our administrators and they tested the system and VPN and state that there is a problem with the modem UM175. Is there some setting that I must set to make this work correctly. This is an urgent matter and must be working, or I will have to purchase another type of modem.

Where are you located? I'm in the Bay Area, CA and I was using the UM175 with my PPTP VPN without any problems. However, I recently upgraded to the new 4G on Wednesday and now the PPTP VPN won't authenticate...errors on verifying user name and password. I did a packet trace and found GRE packets are being dropped. This is a Verizon issue and it appears their 4G upgrades have directly caused this problem.
There is another thread about this issue located here: http://community.vzw.com/t5/Broadband-Netbook-MiFi-Devices/LG-LTE-Modem-VPN-Not-Working/td-p/349846

WTR54GS can't connect on office network?

Ok here is my current setup at the office and I am trying to add WTR54GS to the mix.
DSL MODEM --> old router (not linksys)--> hub-->wired to office jacks |
From the office jack interface can I connect the WTR54GS? Basically I am trying to create a wireless access point in my office off the wired jack and still have my desktop PC work. I have read the posts regarding cascading the routers and this is not what I am trying to achieve as I am not physically connecting the routers together. I guess I am trying to use the WTR54GS as a glorified switch and a wireless access point. Any ideas? Thanks in advance for your assistance.
Message Edited by saduser on 01-10-2008 10:03 AM

When you connect your computer to the jack, check the ip address that it's gettings. If the ip is 192.168.1.x and the default gateway is 192.168.1.1, then you need to change the ip address of your router first. If it's a different ip address, then just plug the router to the jack.
Good luck! (",)
The box said windows xp or better... So I installed Linux!

Remotely accessing the office network connected to E1000

Hello;
I'm the IT Manager for a Small Non-Profit Organization(Helping build homes, giving education, health care for the poor).
All computers are connected to a network through a Linksys E1000 Wifi Router and I would like to access all computers
remotely especially when I'm on my site visits or when I'm not in the office. Is there a way for me to join the network even
if I'm outside the office.
Thanks for the Help and more power to those sharing their knowledge.

The easiest program to use is LogMeIn.
See https://secure.logmein.com/

Connecting my IMAC to my office network

What equipment do I need to migrate my Imac to my network at my office wirelessly?

Is this a home office or work office? If it's a work office, what kind of setup does the office have, how are the other computers connected to the network? Is there an I.T. Manager?

I moved to ios 8 and now I am unable to connect to my office network

I moved to ios 8 and now I am unable to connect to my office network (WPA2- Enterprise), I was able to connect using ios 7 without any problems, now it says my user id / p/w is incorrect which is not right since I am using the same to connect my laptop. Please suggest

That happens sometimes.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Settings to connect to office windows network using wifi

Hi there,
I'm trying to connect my MacBook to the office network using Wifi - it's a full windows network with the usual active directory, fileservers and exchange. I can connect using LAN and can get to the network folders and exchanges etc, But I can't work out what settings need to be changed on the Wifi adapter to go wireless. Had a try searching for the answer but no luck.
I've tried setting up a new user on the Mac with the same name as my network login. Attempted to change the DNS settings to be the network IP and changed the workgroup name under the WINS tab (although that seems to always change back to WORKGROUP automatically). And of course use my network password when asked for a WEP password when trying to connect. It doesn't ask for a username when connecting to the network wifi - just a WEP password.
Can anyone explain what settings I need to change on the Macs Wifi adapter?
And what details will need from my PC to get it going e.g. IP address, workgroup etc.
Not much of a clue with networking. So please speak slowly!
Thanks for the help,
Mike

All you should need is to verify that the correct IP ports - 3283 and 5900, primarily - are open on any applicable routers, and if necessary forwarded to the internal IP address of the Mac mini. Then just set up the Remote Management settings (Sharing system preference) on the Mini and add the mini to the Computers list in ARD.
Regards.

My notebook cord recently short fused the office. I have replaced the cord and the computer seems to working fine, except the internet wont work. It states it is connected in the network preferences. can any one help?

My notebook cord recently short fused the office. I have replaced the cord and the computer seems to working fine, except the internet wont work. It states it is connected in the network preferences. can any one help?

Hi LanaJay84,
If you are having issues connecting to the Internet from your Mac, you may find the following articles helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/ts1317
Regards,
- Brenden

How to connect extreme to an office network

Hi Folks,
Do you any of you know if it is possible to connect the Airport Extreme to an office network?
If so, how would this be done?

Not sure what you mean by office network. Is this a network that someone else has set up and administers?
If yes, you would need to check with the network administrator to see whether or not a router like the AirPort Extreme would be allowed to connect to the network.
If yes, the AirPort Extreme would need to connect using an Ethernet cable from the WAN "O" port on the AirPort Extreme to an available Ethernet port on the network.
You don't mention what service you want the AirPort Extreme to provide. What might that be?

My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1

My iphone5(ios 8.1) is not connecting to my home wifi network but connects to office wifi. This problem is only after updating 8.1I have already done "Reset Network many times. I have switched off and on my router multiple times. No luck.

Hi vpraghu,
If you are having an issue with connecting to a Wi-Fi network with your iPhone, I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Unable to connect to Office Wireless Network (802.1x) after Windows Update

Hi, my notebooks are on Windows 7 Enterprise 64bit. We have only recently started Windows Updates.
We are on a Wireless network 802.1x.
In the past, we are able to do the following steps :
1. Open the "connections are available" window by clicking on the wireless icon (signal bars with yellow sun)
2. Right click on the desired network and choose properties
3. Change settings (eg. MEAP or use local Windows credentials etc)
4. Click connect to connect
Now, from the "connections are available" window, when we right click on the desired Network, only "connect" is shown.
In this case, I cannot connect to the network as the settings are wrong, if I cannot connect to the network how do I change the settings ?
Please kindly advise

Hi,
I agree with britishdhez.
In addition, I would like to confirm which update caused this issue. Is it a driver update? I suggest installing driver update from the manufacturer's website.
You can also reinstall the wireless driver:
a. Click Start, type "devmgmt.msc" (without quotation marks) in the Search bar and press Enter.
b. Expand "Network adaptor".
c. Right click on your network card and then click Uninstall
d. Remove the driver software at the same time.
After that, restart the computer and reinstall the network card driver.
Meanwhile, you may run the Network troubleshooter to see if it can help diagnose and solve your problem:
Using the Network troubleshooter in Windows 7
http://windows.microsoft.com/en-sg/windows7/using-the-network-troubleshooter-in-windows-7
Also, please remove the wireless network profile for a test.
Delete a profile
At the command prompt ( Win+ R-->CMD ), type:
netsh wlan delete profile name="ProfileName"
For you reference: Netsh Commands for Wireless Local Area Network (wlan)
http://technet.microsoft.com/en-us/windows//aa905085.aspx
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Best practices for setting up users on a small office network?

Hello,
I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup:
Users: 5 users on new iMacs (x3) and upgraded G4s (x2)
Video Editing Suite: Want to connect a new iMac and a Mac Pro, on an open login (multiple users)
All machines are to be able to connect to the network, peripherals and external hard drive. Also, I would like to setup drop boxes as well to easily share files between the computers (I was thinking of using the external harddrive for this).
Thank you,

Hi,
Thanks for your posting.
When you install AD DS in the hub or staging site, disconnect the installed domain controller, and then ship the computer to the remote site, you are disconnecting a viable domain controller from the replication topology.
For more and detail information, please refer to:
Best Practices for Adding Domain Controllers in Remote Sites
http://technet.microsoft.com/en-us/library/cc794962(v=ws.10).aspx
Regards.
Vivian Wang

How to setup a small office network

Hello,
I am looking to setup a small office network comprising 6 G4 macs (existing computers) that have been upgraded to the newest OS version. What is the best way to go about networking these computers together in terms of being able to share files, internet connection, access to peripherals and also implementing a firewall.
Any suggestions or help would be greatly appreciated.
Thank you

1, Get a cable internet ISP account; depending on your service you should be able to secure a 5Mbps down and 2Mbps up on the cable e.g. Cox or Comcast.
2. Get a good router. The mass market Linksys and Netgear routers aren't very good in terms of reliability. I use a ZyXEL P-330W router is the best I've ever seen. Its reliable and very efficient in terms of throughout. The Apple Airport Extreme is good.
3. Set up the router to support UPnP. This way all computers will be able to share iChatAV video conferencing. If you enabled "port forwarding" only one Mac would be able to use iChatAV video conferencing.
4. Set up your router for DHCP to dynamically issue Internet address to all your computers.
5. Setup the wireless router for encryption such as WPA. This will encrypt wireless communication.
6. Setup the wireless router for only your computers. You'll have to get the MAC/AirPort ID network addresses as expressed in terms of an xx:xx:xx:xx address. You can get this thru your Systems Preferences -> Network window -> AirPort (in the sidebar) -> Advanced button.
7. If you have Ethernet in your office then skip steps 5 and 6 above.
8. On each computer open up the System Preferences -> Sharing and check-off the File Sharing. Set your user access preferences appropriately.
9. Get a Network enabled All-in-one printer and setup Printer Sharing options. Hook-it up to your network and add your printer by clicking on the "+" sign in your "Print and Fax" Preferences.
10. Don't enable Apple Firewall on each Mac. The router will be the Firewall.
Ok. That's the short-hand.. plug it all in and go!

Can no longer connect to my network - AirPort Extreme

Hi everyone.
I have a small network in my home office and as of lately cannot connect on the wireless side for some reason.
My setup:
I have a linksys wrt54g router connected to my modem.
I have an Intel MacMini connected to the router via ethernet. I also my G5 connected to the modem via ethernet. Then I have just my MB Pro wit it's APExtreme card to connect anywhere in the house via the wireless portion of the network.
Now, I have always been able to connect to my network. I have simple wep protection and can connect to coffee shop hot spots outside my home (so I know the problem is not in my MB Pro or in the card). It has got to be in the router setup.
Any ideas?
Thanks in advance for your help.

When you restart a wireless network and things seem OK for a time, but the speed slows down after a time and connections become difficult....this is almost always a clear indication that the network is picking up some sort of wireless interference from another source.
The most common cause of wireless problems are cordless phones. If you have them, try turning them and their base stations off, restart the wireless network and try things out for a few hours if possible. If things improve, then you'll need to move the phones as far away from any wireless devices as possible, or as in my case, switch to cordless phones that do not use the same 2.4 GHz frequency as most wireless networks.
"Extended" networks are also more susceptibe to picking up interference than those that have a single router. You might try powering down the Express for a period and see if that makes any difference.
My neighbor...across the street....can literally bring my wireless network to a crawl and stop if he's in his front yard talking on his cordless phone, so it's always possible that a neighbor is causing the problem, or a wireless security system nearby.
Post back on your progress and findings and we dig a bit deeper if needed. Unfortunately, if you are in a crowded situation like apartments, condos, etc the wireless interference issue can be a real challenge.
Message was edited by: Bob Timmons

Can't connect to wireless network with "conflicting" essid

Hello,
My wireless card works perfectly (actually I am using ndiswrapper, but anyway) on Arch and I can connect to my home wireless network. I use iwconfig to connect.
In my office we have a wireless network. It's essid is "default" and it uses WEP. I can connect to it using Windows, but not using Arch. Im running the following commands:
iwconfig wlan0 essid "default" key XXXXXXXXXX
dhcpcd wlan0
and it doesn't connect ("waiting for carrier..." and nothing happens)
I guess the problem is that there is another network with the same essid - "default". I've tried to manually associate my card with my office network AP using iwconfig wlan0 ap XX:XX:XX:XX:XX, but it didn't work either.
What should I do?

What kind of Wireless card do you have and what does it say when you do a lspci? So for me, I know I have a Broadcom and the way I found it was to do:
lspci | grep BCM4312 (or whatever wireless make/model you have)
or
lspci | grep "Network Controller"
The second option should also get it for you. From there, you can check out this list to see if that might help you with drivers (but then again, you might have known this already so...).
Hope this helps.
Last edited by ruffedgz (2009-11-23 21:03:42)

Palm tx connection to office network

Similar Messages

Maybe you are looking for