Palm TX constantly resets when "Memo" selected

I store multiple (~75) notes in Microsoft Outlook 2003 which I try to synchronize with my Palm TX. Synchronization seems to work fine. However, when try to access in the handheld, it does soft reset. Any solutions??
Post relates to: Palm TX

Found another post on this, worked for the person.
http://forums.palm.com/palm/board/message?board.id=hardware&message.id=17159

Similar Messages

Plam TX resets when Memo is accesed.

Palm TX does a reset each time the Memo icon is slected. All other function work normally.
Post relates to: Palm TX
This question was solved.
View Solution.

Sounds like you have a corrupt Memo on your TX. Two choices:
1. Purchase "DBfixit" from Pimlico Software. You can install it for free and have it scan for problems, but to fix them you have to register/purchase it.
2. Set your computer's Memo conduit to "Desktop overwrites Handheld" for one HotSync. (If you don't check the "Set as Default" box, it will only happen once). This will write clean copies of the memos you have HotSynced on your computer to your TX. All should be well after that.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

IPod 5th Gen constantly resets and is not detected

My iPod 5th Gen erased all my music and constantly resets when plugged in. I've searched far and wide through support to no avail so I look to the community to aid my quest to load music to my iPod again. Thanks in advance for the help!
Situation:
- music and all data erased suddenly and is currently in factory settings
- when iPod is plugged in to computer, the iPod screen shows (in order):
     ° "connected, eject before disconnecting" (~5 seconds)
     ° off screen, completely blank (~1 second)
     ° apple logo appears as if restored (~5 seconds)
     ° repeat perpetually
Attempted Remedies and Scenarios:
- restore iPod via select / menu buttons
- try running Disc Mode via select / play buttons
- restore iPod via iTunes (cannot attempt because it is not detected under devices)
- reformat and erase all data in iPod via iTunes (cannot attempt because it is not detected under devices)
- reformat iPod via Disk Utility (iPod is not detected on Mac so cannot select)
- attempted all of the above with the following variables:
     ° with pc running Windows 7, iTunes current
     ° with Mac mini running Mavericks, iTunes current
     ° with Macbook Air running Mavericks, iTunes current
     ° tried all USB ports on all above computers
     ° tried 2 separate 30-pin USB cables (both USB cables work with my iPhone 4s)
     ° iPod is fully charged
     ° restart all computers

Hi everyone.. just found the solution... conveniently after I start a thread. Turns out that my iPod nano had converted all 7.3GB of my 8GB into "Other" space and reset all my settings.
Solution is as follows:
- run disc mode while plugged-in (running Macbook Air)
- restore dialog box appears via iTunes while in disc mode
- restore iPod nano
- upload music
- enjoy

IPod resets when playing movie

So I just picked up my Composite AV Cable for iPod Classic and tried to use it to play a movie (Shaun of the Dead) that I had converted with Handbrake for iPod format. This movie has been on my iPod for a while and I've had no problem playing it before. But now that I've connected the Composite AV Cable, the iPod will reset when I select to play Shaun of the Dead, regardless if the cable is connected or not. Other movies & TV shows (purchased from iTunes, ripped from DVDs, and recorded & exported with EyeTV) work fine. The only difference with Shaun of the Dead is that it doesn't have chapter markers. Is there an issue with iPod Classic & the Composite AV Cable playing movies of a certain length without chapter markers?

What kind of movies are they? Did you download them from iTunes store, or what? Did you have to convert these movies to a format compatible with your iPod? You need to be more specific. If you had to convert your files, then something could've gone wrong with that. Too many variables here. Need more info.

Palm TX does a soft reset when I tap on memos

I am new to posting on this forum. My Palm TX does a soft reset when I tap on memos or push the button I have set to memos. I also have had several soft resets occur after tuning the my palm on from the On/Off button. I have had Palms for the last 10 years. Never had this problem. The only problem I had was the On/Off button on The TX failed as a result this is my 3rd TX in the last 4 years. Any suggestions welcome. I was behind on syncing and my last sync was done about 1 week before this problem occurred. I really do not want to do a hard reset. This problem has been going on for a month. Can I just do an unistall/reinstall without loosing any info?
Post relates to: Palm TX

This question has been asked and answered many times here... Somehow, the memos database has become corrupt on the device. There are two ways to fix this:
1. First, open Palm Desktop and go up to Tools/Options/Tools Tab and click the Check Records button. Let it look for corrupt records, and if none are found then a simple fix is to set your HotSync Manager setting for the Memos app to "Desktop overwrites Handheld" for one operation.
If using Palm Desktop 4.x, change the conduit here: Click on your HotSync Manager icon in the tool tray, and select "Custom". Make sure your HotSync Account name is showing in the top window, then highlight the Memos app and click the "Change" button. Click the selection for "Desktop Overwrites Handheld" and click "Done". (DO NOT select the "Set as Default" box!) Now do a HotSync. Since you didn't select "Set As Default" it will only do the overwrite for one operation, then default back to "Synchronize".
If using Palm Desktop 6.2.x, change the conduit here: Click on the HotSync Manager icon in the tool tray, and select "Settings". Make sure your HotSync Account name is showing in the top center window, then click the "Applications" link in the left column. Check the box for "Show Details", Highlight the application you wish to change, then click the "Configure" button. Click the bullet for "Desktop Overwrites Handheld" and DO NOT select the "Set as Default" box. Now do a HotSync. Since you didn't select "Set As Default" it will only do the overwrite for one operation, then default back to "Synchronize".
Check to see if the HotSync completes without errors, and your Memos application is back to normal.
2. If the above does not fix the problem, then download and install "DBFixit" from Pimlico Software: http://www.pimlicosoftware.com/dbfixit.htm The program will search your device for errors, and fix some for free. Others may require the purchase of a registration code, with the funds going to an animal rescue non-profit (Gorilla Haven).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Palm TX Resets when pushing Hotsync

I'm posting this for my father. He has a Palm TX syncing with Windows Vista. When he tries to hotsync via USB the Palm device does a soft reset and thats it. I tried syncing it over the wireless network and when I push hotsync on the device it does the same thing. I looked on the hotsync FAQ and they did not address this issue. It seems like this must be an issue with the device and not windows. Any help would be appreciated.
Post relates to: Palm TX

A hard reset wipes everything off your palm. Make sure all your info is backed up before following these instructons because you will not be able to get it back. You might want to double check on your computer to make sure all your info is there before doing a hard reset.
It is performed by holding down the power button while sticking something thin (your stylus, paper clip) into the back reset hole of your device. Keep your hand on the power button while you release the paper clip from the reset hole. The screen will now say "Palm Powered." Take your hand off the power button. You will now see a screen in 5 languages prompting you to erase all data from the palm. The screen will say "erase all data? Yes - up, no - down" and you need to click on the up arrow (silver button on the 5 way navigator on the bottom of the palm). This will erase all the info from your device.
Now, are you able to sync your palm?
When you begin sync'ing, the computer will prompt you, "there is no user name associated with this account..." select your old user name and then all the info will come back onto your palm.
Let me know what happens...

Downloaded ios6 to my ipod touch and lost all color when i select an artist or song how can i get to be blue again tried resetting did not work any help would be apprciated?

just downloaded ios6 on my ipod touch and lost all color when I select an artist or song how can I get it to be blue again tried resetting did not work any help offered would be liked

You need to restore.
Everything should be on your computer, so you can just sync it back.
iPod touch User Guide (For iOS 4.3 Software)

Ipod resets when selecting certain mp3 files

my ipod video 5th generation resets when selecting certain mp3 files ???? As well as certain video podcasts . Whats the deal anyone ?

Is Apple working on a "real" fix for this bug or do we have to live with limited use of our iPod resources?
No one on here really knows (the creators of the programs and software do not visit the Discussions), but Apple could possibly provide a fix in the future. It may not be very "high on their list" of iPod feedback requests of new features, and bug fixes, though, since this isn't an incredibly common problem.
If you'd like to add the the voices and tell Apple about this issue, let them know here on their feedback form: iPod Feedback
-Kylene
If any post helps or solves your problem, please click the "Solved" or "Helpful" buttons on top of that post. Thank you for helping the boards!

I forgot my answers of security questions when i select (send a mail to reset my security questions) the mail wont received to my mail box?

i forgot my answers of security questions when i select (send a mail to reset my security questions) the mail wont received to my mail box?

Read this about how to change the security questions: http://support.apple.com/kb/HT5312
If you can't use these procedures because you don't have a rescue email address you will have to contact Apple. See http://support.apple.com/kb/HT5699

HT201363 hi, I don't remember the answers for my security questions and I don't have "send an email to your rescue email address to reset your security questions and answers" when I select "Password and security" on my apple ID. What should I do?

hi, I don't remember the answers for my security questions and I don't have "send an email to your rescue email address to reset your security questions and answers" when I select "Password and security" on my apple ID. What should I do?

Hi Roy,
Contact iTunes support:
https://getsupport.apple.com/GetproductgroupList.action
Select your country, complete the prompts.
Or you can contact them by email:
https://ssl.apple.com/emea/support/itunes/contact.html
They usually will get back to you via your regular email within 24 hours.
Cheers,
GB

Ipod constantly resetting itself when plugged into Itunes.

My new 5G 80gig Ipod constantly resets itself when I plug it into Itunes. Any ideas? The Ipod is new...

Here's what I've done so far unsuccessfully:
Placed it into disk mode, but it does the same thing. Once plugged into the computer the ipod is recognized by both windows and Itunes but it resets itself within 30 seconds. It constantly keeps resetting itself.
Also, since it keeps resetting itself, and therefore disappears form itunes, I cannot reformat/hardreset it via Itunes....

IPod resets when selecting Radio (Nano 6th)

When a select the radio option my nano reset. If i select the option without the headphones the ipod said "no radio signal.." after plug-in the headphones the ipod reset. I already reset using volume down and sleep button. Do I have to return my nano? i am using 1.1 software.

Hello moldorf,
And welcome to Apple Discussions!
You might want to try restoring the iPod to factory settings through iTunes first. If still no change, then yes, your next step would be to return the Nano. Here are steps on how to restore your iPod.
http://support.apple.com/kb/ht1339
B-rock

Nike+ iPod resets when selecting "Basic" workout; no other runs available

This is frustrating. I've reset my nano 3g to factory defaults several times, restoring everything from scratch. I don't use nested playlists and I've freed up more than 900MB. I'm running v1.1.3 and it still seems to exhibit this exact behavior after just a few runs:
The iPod will reset whenever I select a "Basic" workout. Afterwards, very few, if any choices will show up under the other workouts (calories, distance, etc). If I try Basic again, it resets again and then NO options show up under any workouts, making it impossible to use the Nike + kit!
I've tried restoring the iPod multiple times and this issue has been ongoing since March of 2008 - a full year.
Any ideas? I do have about 25 playlists, even though none are nested. Is this a quantity of playlists issue and maybe the root folder in the nesting is counted as an additional playlist.
Please help if you have any ideas or solutions! FYI, this problem started back in the original version of the firmware and has occured even after a restore in every version since.

Ok. Here's an update. I actually returned my old nano to Apple, while it was still under warranty, and was able to get a new one. Brand spankin' new...Plug in the nike+, the runs show up. Perform and reset, and the runs are gone again! Same problem!!!
HELP!

My plays are constantly resetting. Anyone have the same experience and how do you correct it? Is it iTunes Match that's causing it.

My plays are constantly resetting. Is anyone having the same experience? Started with iTunes Match. Anyone have a solution?

By configuration I mean something where you have saved settings. This includes mail and facetime accounts, iCloud/MobileMe, and other passwords that are in settings or preferences within applications or system services. Beyond these, there are non-configuration passwords, such as when you access a shared computer on the network. In this situation the computer requires authentication information, but it is not saved in a configuration of sorts. Therefore instead of the password being automatically saved, the system provides this as an option to do if you wish.
If you do not want your password saved in the keychain and automatically used, go to the configuration for the desired accounts and delete the password. Doing this will result in a prompt for you to supply the password when the service tries to connect. This prompt will have an option to save the supplied password in the keychain, but it will not be selected by default.

Constantly resetting NVRAM.

Why do I have to constantly reset my NVRAM on my MacBook Pro 13inch Retina? It has happened twice now. The both times, when I pressed the power button, I heard the chime, but the screen remained gray, not even the Apple logo appeared. Reseting the NVRAM fixed it, but I don't really want to do this again.
I just want to know is this normal or not. Is there a solution to this? Is this like a bug the Yosemite brought?
Please answer quick.

System Preferences > Startup Disk
Select Macintosh HD.
Best.

Palm TX constantly resets when "Memo" selected

Similar Messages

Maybe you are looking for