Palm TX crashes when WiFi is selected

I have been accessing the internet using the T/X  for at least 2 years.  Now each time I select WiFi, my Palm TX crashes. 
If I have to do a hard reset to fix this, do I have to back up anything?  If so, please recommend a free one (I could not locate NVBackup on Sourceforge.net).  I have extra programs on the T/X that are not part of the original software.  If I do a synch after hard reset, will the extra programs automatically load?
Would also appreciate instructions for hard reset.  Thanks
Post relates to: Palm TX

Ok, so I googled like a mofo looking for absolutely every single forum thread about "Palm TX WiFi Crash." Every time I tried to turn on the "WiFi radio" i.e. initiate a network connection, my Palm TX would reset. The issue was that I STUPIDLY!!!! installed various .prc files of random freeware programs I thought would be cool for my Palm TX.  After installing them, and trying them out, at some point one program tried to access my WiFi network and the thing crashed.  So I freaked out , because as soon as I tried to access WiFi with other programs (Kinoma, Mundu Radio, Blazer) the **bleep** thing instantly would reset.  I can't explain how bummed I was.  Absolutely bummed.  While a Palm TX is cool for various other uses, without WiFi the **bleep** thing is basically sent back to the stone age- like a powerful color game boy.  So I did what any proud parent of the kick @ss TX would do-  I spent hours looking into why the WiFi would fail.  I discovered the soft reset, the warm reset, the hard reset.  I backed up the **bleep** thing and started experimenting.  Someone told me that it might be a corrupted preferences file, that I should back up the TX and then erase it, see if in the "factory" state the WiFi would work.  The WiFi would not work even after I completely erased the product with a hard reset.  I was not happy to say the least, completely convinced that the wifi had just suddenly died due to some hardware issue, which I do not have the funds to repair!  So, thinking that the built-in ROM WiFi files had become corrupted, I found (full of excitement) that a certain genius by the name of Dimitri had created an enhanced Palm TX ROM file (http://www.1src.com/forums/showthread.php?t=112779 / file: THIS) - Palm doesn't give you a ROM file without making you pay - Dimitri is a godsend! I followed the instructions and everything worked perfectly.  
The first thing I did was open the "MAIL" app (built in) and try to access my GMAIL account.  It asked if I wanted to initiate WiFi, and for the first time it actually worked!!!!!!!!!!!!!!! AHH!!!! No freeze/restart.  Then I was so excited I could pee my pants man.  Now I did quickly wonder if just opening Mail and trying to access WiFi (i.e. through a Palm-sourced app) was the cure, as I hadn't tried to use the mail app when Wi-Fi was crashing, I was trying Kinoma etc...  Worth a try.  I can't truly say that using Dimitri's ROM upgrade was the cure, but everything worked out and I am so glad.   On an even brighter note, Dimitri's ROM upgrade come with NetFront 3 browser, which I hadn't heard of.  Holy crap!  It makes Blazer and Opera a complete joke.  Web pages load up instantly like on your computer, web pages look normal- then on top of it, the ROM upgrade includes "Drive Mode," a program that on my iMac allows the SD card in my Palm to pop up on the desktop like a thumb drive, makes the TX an SD card reader through the USB hotsync cable.  I wish I had discovered this ROM upgrade sooner, as I had already purchased Card Export, which is a wonderful program that does the exact same thing- only $10.00.  So if you have no problems with your TX I'd still recommend just using Card Export, but its a rare thing for a bad situation to revert to an improvement! After all this crap, my TX is much more stable with the ROM upgrade, WiFi works again, the browser is finally a really great browser, and I will not badmouth my Palm Handheld. I love the **bleep** thing!

Similar Messages

  • PPro CC crashes when using Track Select tool

    This is probaby the most bizzare bug i have encountered so far - everythig works - i can scub, play and adjust footage, apply effects, titles and time remapping, but when i select Treack Select tool and click on the timeline, Premiere Pro crashes.
    This is a new develpment as well - i was able to use PPro CC just fine since i installed it (trial version), until yesterday.
    No new applications or updates for Windows, Nvidia card or Adobe were installed lately, but all drivers are up to date (according to various update managers)
    Premiere CS6 works fine with the same sequence (mixed RED and DSLR footage)
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Adobe Premiere Pro.exe
      Application Version:    7.0.0.342
      Application Timestamp:    5176598d
      Fault Module Name:    ntdll.dll
      Fault Module Version:    6.1.7601.17725
      Fault Module Timestamp:    4ec4aa8e
      Exception Code:    c0000005
      Exception Offset:    0000000000052fc6
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    1ce0
      Additional Information 2:    1ce04770b02f823ff20b7f82076eba51
      Additional Information 3:    c192
      Additional Information 4:    c19212ee5e1e8407cb093e848f6cb5d8
    System specs:
    Creative Suite CS6 subscription
    Creative Cloud trial
    Windows 7 x64, SP1
    Nvidia Quadro 4000 GPU
    i7-3039k CPU
    32Gb of RAM
    thank you

    Yep, buggy project..
    New project with same and different footage works fine
    Other project created in CC works fine
    Imported sequence from CS6 works fine
    Imported sequence from a buggy CC project into a new project causes crash on using Track Select tool
    I was able to revert the project in question to CS6 via Final Cut Pro XML, also works fine (for now, at least), just have to redo some time remapping which didn't come through with XML translation, small loss
    I guess i'll wait few more months before switching to PPro CC, maybe mysterious bugs will be worked out by then
    Thank you for your replies!

  • App Store crashes when purchases is selected.

    After installing iOS 6 to my iPhone 4S the App Store crashes every time I select the purchased button in the updates tab. Has anyone else had this issue and know if apple is working on a fix?
    Also on a side note the other day I couldn't move any app icons, when I tried the GUI would reboot. Fixed it be manually moving the app in itunes.

    I just got a iTouch 5G and same issue. Fresh out of the box, and not able to access purchased app on store. Sadle Apple doesn't offer any other way to access previously purchased apps other than on the iOS device. This seems to have been an issue for people since iOS6 was released and still hasn't been fixed. I've tried everything from restart, restore, change date, kill app store, register, authorize. Nothing is working.

  • Iphone 5S iphoto crashing when trying to select and create folders on IOS 8.0.2

    The iPhoto app keeps crashing when I try to make a new folder.  Don't get me started on the "recently added" tab.  I cannot access my entire library anymore through apps because they can't find my entire library.  They can only see the recently added tab and any other custom tab made.  Therefore I need to create and move all of my photos to another custom tab. But, the app crashes every time I try.  Any input would be appreciated!

    Hello Nosewitdot,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device issues:
    Turn your iOS device off and on (restart) and reset
    How to restart
    Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    How to reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Get more help
    See what to do if your device still doesn't respond or doesn't turn on.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Palm Desktop crashes when viewing one month in monthly view

    Hi--this is a weird problem. Never seen it before.
    --My Treo 680 (Win XP SP3), with Palm Desktop 6.2.2 seems to sync fine. I make changes in the Treo, it appears on the desktop.
    --Also, I can view and edit the desktop in DAY view.
    I normally default to monthly view though--and when I try to edit anything in a monthly view the Palm Desktop immediately crashes.This also seems to happen only with one month--July--where I recently added a lot of new appointments.
    I ran the "check" tool for corrupted records, came up clean.
    The data seems to be there and be safe and sync, but every time I try to access this one month from monthly view--it crashes.
    Any advice, suggestions?
    Post relates to: Treo 680 (Unlocked GSM)

    Your link generated an error message..but I did find a couple of relevant threads. Thanks..
    --I have no appointments spanning midnight, so I presume that's not the problem
    --I'm reluctant to downgrade versions. I use the same software on my Vista laptop as on my XP desktop and I'd like to confuse the issue or go through degrading both.
    The dbfix program was more interesting.  It found for Calendar: one appointment in several places that it said "blob goes beyond end of record."
    I don't know what that means, but it was particularly odd as this particular appointment was repeated in multiple years as long ago as 1969, it said--which goes beyond the ability of the desktop software even to access; certainly I wasn't using a Palm in 1969, and obviously it didn't exist. So I deleted all of them but for that 1969 one since the desktop will only go back to Jan 1970.
    After deleting what I could delete on the desktop, I sync'd.
    Didn't help.
    I ran the program again and the exact same older--presumbably fictitious-appointments from old years like 2007 were still coming up as checked errors. Hmmm. Apparently deleting them on the desktop helped not at all. So now I deleted one on the 680 as a test.
    I sync'd. Immediately crashed the Palm, but when it came came back up. I doublechecekd--that 2007 record was now gone from everything, desktop and PDA. I syncd again,,,went through fine this time.
    Ran dbfix again to check--just coming with that one 1969 inexplicable error.  Ran Palm Desktop now. Ran the Options/Tools/Check record on the desktop (included utility) just to be sure--no errors.
    The final test--running Palm Desktop back in monthly view.  Immediately crashed again.
    Shrug!
    Now, I don't mind buying the dbfix program if that'll do it, but does this seem like something it needs to go through and might actually fix, as opposed to my manually deleting the things?

  • DSR11 Not Recognised.   FCP Crashes When Log & Capture Selected.

    I've recently had a quite traumatic period installing QT7 Pro to work with iDVD disk burning. During that period, FCP3 worked faultlessly. Succeeded at last with disk burning then shut down for the night. Next day went into FCP and found that my DSR11 was not being seen by it. Chose 'Continue' and tried to set things up through 'Easy Setup' in the usual way. Couldn't be done. Selected Log and Capture as a 'try' and FCP crashed, leaving me with the Desktop screen. Despite numerous attempts to create a connection with the DSR11, I always am getting the box telling me it cannot be found and giving the choice to try again or select 'Continue.'
    I'm wondering if the QT settings were in some way corrupted as I shut down the computer.... I'd like some help in getting back the settings.
    I downloaded the QT7 upgrade which afforded the correct running of FCP and iDVD disk burning but now I can't find any record of the prog and its key in order to re-install it. I looked in HD/Library/Receipts and could only find references to Flip4Mac and QT Packages - no QT references with numbers following. Since inplutting this post I've found that the last mentioned QT package is 7.2 so I tried reinstalling it but after going through the procedure it ends with a message that there were errors in the installation and that I should try reinstalling it again.... Well, after four attempts with the same result, I'm here, and on tenterhooks!
    As an aftermention..... I also have used the DSR11 with my MacPro to successfully operate FCP in its normal way.
    Ron.
    Message was edited by: Ron

    On the Apple website it specifically states that QT7.2 with OSX.4.10 (actually any system of 10.3.9 and above) is the best way forward for the most efficient result from my computer. In view of that, I've recently used their Feedback page to pass the information to them. Yes, I know it states that one can only use it for feedback and they will not entertain other than that but we should have the abililty to put back to them the sort of quandary I'm in over their OS and allegedly compliant prog - ie QT7.2.
    I've now taken the bull by the horns, because there's no other way I'm going to get satisfaction with Apple's software which should be capable as stated, and I'm about to re-install QT7 then try once again. That's despite not finding those additional Receipt files for scrapping prior to the install.
    I'll report back the result when finished and tested. If it again fails, Apple will get an official complaint regarding their software that fails after being bought when their advertising says it improves rather than fails.
    Thanks for your inputs.
    Ron.

  • Labview 2009 SP1 crashes when moving large selection with arrow key

    If I select a lot (10 or 15) of Block Diagram components and try to move them some distance with the arrow key, I will frequently get a program crash.  Since a smaller number of components seems to crash after a longer travel distance, it looks like some kind of buffer overflow error.  I do not see this problem when using the mouse to move selections.
    I have checked to be sure I have the latest video driver for my NVIDIA Quatro FX570.  I have also tried working with no hardware acceleration and no combined writes.  This is happening on Windows XP SP3 with all the current updates.
    It has become so bad that I have to do a Save As every fifteen minutes to keep from losing data.
    Why don't I use my mouse for all movements?  Because it is not as accurate and not so easy to restrict to one dimension of movement.   My hand is not as steady as it once was.
    I hoping someone will have a suggestion that will clear up this problem.
    Solved!
    Go to Solution.

    As I indicated, I had the same problem with 8.5 and just DID a new installation of Labview 2009.
    Since it is possible my three-monitor setup, which obviously requires more video memory, may be at the root of the problem, I am satisfied with the workaround of dragging the objects near their final destination and then using the arrow keys.  
    Three monitors are ideal for front panel, block diagram and Help/Internet/Probe Window.  When I had to work in the field with only one monitor, I felt severely handicapped.
    You may consider the matter closed.
    Thanks for attempting to duplicate the failure.

  • Palm Desktop Crash when click the Month Tab or Media

    I have a new Centro and have loaded the Desktop v 6.2.2.  I was running an older Destrop with my Tungsten but upgraded.
    Since the upgrade, I get some strange behavior with the desktop.
    First, when I open the calendar and then click on the month tab (in lower left corner), the system will either hourglass or will simply crash out.  This is consistent.  The other tabs work fine (Day, Week and Year), but not the Month tab.
    Second, when I try to go into the Media function on Desktop, it will hourglass and never open Media.  I'm then forced to close desktop because the system is locked.  This problem is also consistent.
    The last issue has to do with desktop system colors.  The older version of Destop offered different colors to indicate business, personal or other categories.  With 6.2.2 there are no color choices and everything is gray.  Where did the colors go?
    So far I like the Centro, but have not been impressed with the new Palm Desktop at all....
    Any help is greatly appreciated.
    PS---I'm using XP Pro Service Pack 3 
    Regards
    Jeff
    Post relates to: Centro (Unlocked GSM)

    I have a new Centro and have loaded the Desktop v 6.2.2.  I was running an older Destrop with my Tungsten but upgraded.
    Since the upgrade, I get some strange behavior with the desktop.
    First, when I open the calendar and then click on the month tab (in lower left corner), the system will either hourglass or will simply crash out.  This is consistent.  The other tabs work fine (Day, Week and Year), but not the Month tab.
    Second, when I try to go into the Media function on Desktop, it will hourglass and never open Media.  I'm then forced to close desktop because the system is locked.  This problem is also consistent.
    The last issue has to do with desktop system colors.  The older version of Destop offered different colors to indicate business, personal or other categories.  With 6.2.2 there are no color choices and everything is gray.  Where did the colors go?
    So far I like the Centro, but have not been impressed with the new Palm Desktop at all....
    Any help is greatly appreciated.
    PS---I'm using XP Pro Service Pack 3 
    Regards
    Jeff
    Post relates to: Centro (Unlocked GSM)

  • Audition CC is crashing when attempting to select the Mastering effect from the Rack.

    Steps: Load audio wave file, from effects rack select Special > Mastering.
    Audition Error
    Audition has encountered a fatal error and needs to shut down.
    This does not happen when selecting other plugins in the same tree.
    I did choose the option to import presets from previous version which I suspect might be causing a conflict as I did have custom presets from Audition CS5.5 for Mastering.

    I think my first hunch at troubleshooting this would be to rename the preferences folder and relaunch Audition, so that it starts with fresh, clean, non-migrated preferences and see if the crash still occurs.
    If so, then the presets and preferences are likely NOT the problem and you can rename your old preferences folder back.  Then we need to do a little more hacking and find out what Audition or the OS thinks is causing the crash.  This will be different depending on the OS.

  • IPhoto Crashes when trying to select rating

    Hi there, is there anyone that can help?...
    Everytime I select an image and try to give it a rating as soon as my pointer gets to "rating" in the menu the whole app crashes.
    Is there anything I can do about this????....
    Many thanks.
    Regards
    Piers Le Sueur

    what version of iPHoto?
    Try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • PSE8 crashes when help is selected

    I use PSE 8 for Mac. Lately when I click on Photoshop Elements Help under the help menu the app crashes immediately. A few hundred lines of text show up in the resulting error panel with a message that Apple will be sent the message.
    Any ideas on how to fix this?
    Thanks for the help.

    I just got a iTouch 5G and same issue. Fresh out of the box, and not able to access purchased app on store. Sadle Apple doesn't offer any other way to access previously purchased apps other than on the iOS device. This seems to have been an issue for people since iOS6 was released and still hasn't been fixed. I've tried everything from restart, restore, change date, kill app store, register, authorize. Nothing is working.

  • PSE 9 crashing when Organiser button selected.

    PSE 9 crashes on opening if the Organiser icon is selected. Edit icon does not crash program. Windows states "PSE 9 Elemnts Organiser has stopped working, will look for cause/reason then closes program.

    Hi,
    Can you please let us know which operating system you are using.
    You might like to start by reseting you preferences as described in section 3 of this document
    http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-system-errors-freezes-photoshop. html
    If that doesn't work, there are other things we can try.
    Brian

  • Illustrator crashes when I use selection tools?

    As of last night, every time I use the selection tool to click on an object, Illustrator crashes without giving me a crash report.  I've already tried restoring my preferences and that hasn't helped.
    I'm running OS 10.6.8 and Illustrator CS6 16.2.1
    Also, for what it's worth, I am also unable to use the selection tools to move objects in InDesign.  This started happening at the same time.
    Any ideas?

    kahoxworth,
    You may try to close down all other applications and see whether it helps. Some can cause different kinds of disturbances; you can see a list of usual suspects in Item 7 in Other options; those are just the commonly known ones.

  • Iphone 6  massasge app crash when trying to select a photo

    I can send massage just fine. I am able to copy and paste photos or video no problems. But if i try to use the cam button in the massage app it pulls up the screen and no preview of last photos show up and the massage app will crash. any idea? try to hard rest, closed out massage app, clean up photos and videos, removed all deleted photos and videos. New phone setup so was not restored from older backup. happen in 8.0 and 8.0.2

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • Premiere CS4 - Crashes when Export is selected

    Seems like every time I turn my attention to things other than video, and then return after a while, Premiere has a
    new problem. Like it's angry at me for neglecting it.
    This time it's the export feature. When I click on Export to create a video, the program just hangs up. Adobe Media Encoder does not start. Media Encoder does come up when I start it myself, but not when called from Premiere.
    When I try to click on any place on Premiere during this period, I get an aggravated "beep."  It's almost as if there is a hidden alert box, but I have tried all I can think of to find it, and can't.
    I hope I am not gonna have to uninstall and reinstall. I do have a life.
    If anyone has any thoughts, I'd sure appreciate seeing them
    Thanks.

    Thanks, guys, for all the input. One of the suggestions had to do with having gone from two monitors to one. That is not the case for me. I have been using two monitors for quite some time without problems, and am still using two monitors.
    As I mentioned in my original post, when the lock-up occurs, it acts like it has thrown up an invisible dialog box, awaiting my response.  It dawned on me over the weekend that if the program is doing that, then hitting either Enter or Esc should make a difference. So I tested that theory this morning, and sure enough, if I hit Enter it continues on with the Media Encoder. If I hit Esc, it unlocks the program.
    So obviously there is a dialog box that is somewhere off the screen. As I also mentioned earlier, I squished all the open windows down in case the dialog box was behind one of them, and I never saw it.
    My only concern is, I don't know what question I am answering when I am hitting Enter to continue with the process. Maybe someone can tell me? If it came up before, I don't remember what it was.
    Ten lashes on me for not thinking of that idea sooner.
    Thanks again!
    Bill

Maybe you are looking for

  • Multiple FCP problems

    First, My cursor would hang up followed by the entire system crashing. I reinstalled everything and it seems that problem has gone away. BUT, After reinstalling I reinstalled FCP, using an FCP uninstall I found. Now FCP opens with and error message..

  • Reuse pictures in multiple WD projects or DC's

    Dear SDN-members, My question is about pictures and icons in Web Dynpro. If you like to use a picture or icon in your Web Dynpro you put this picture or icon in the in the Mimes directory (example: <i><b>[project name]\ _comp\src\mimes\Components\[we

  • CS5 64bit printing

    I have been using CS5 64 bit and recently my prints have printed darker than the screen. I recalibrated the monitor and thennew icm is being used. I also have the correct icc for the paper. I switched back to CS5 32 bit and the problem goes away. Any

  • Sold to number from the IBase

    Hi All, I want to find out the sold-to for the give IBase, in IB53 I can see a BP is assigned as a sold to partner. How can I read the sold to of the Ibase is there any function modile or any table. Appreciate your reply. Thanks, Praveen

  • Update trail version on Coldfusion9

    Hi there, I've installed Coldfusion 9 using a trail version.  Now I want update the license that recently purchased.  Do I have to reinstall or is there a configuration file I can update? Thanks