Palm TX crashing - line 942 Cannot Open Calendar library

For the last few weeks my Palm TX is crashing almost every other day.  I can not find and easily recreate the problem, but when system crashes is usually when I try to access Calendar via hard button.  Since I am also running "Reset Doctor" this is the message that is being recorded:
"DatebookUI.c, Line: 942, Cannot Open Calendar library"
Appreciate any feedback and maybe some points how to correct this problem.
Andrew

As with most problems that occur on a Palm PDA, it is either software or hardware related and we have to determine which one.
Best method is to first make a complete backup of your unit to your SD card using the free "NVBackup" (available from http://www.freewarepalm.com) After the backup is complete, Hard Reset the unit, then test to see if full functionality returns.
To perform a Hard Reset:
While pressing and holding the Power button down, tap and release the Reset button in back and continue to hold the Power button down. When the grey Palm logo appears, you can release the Power button.
You should now see the warning page in about 5 languages. Press the UP direction on the 5-way pad to complete the task. Your Palm will reset itself several times as it re-installs the original programs and erases all your previous data.
DO NOT HOTSYNC YET! Test the unit before reinstalling any software. If the unit works correctly, your problem is being caused by a "drug interaction" of software - maybe one rogue program, or a combination of several. You'll have to reinstall the third-party programs one or a few at a time to find the problem one. To avoid re-installing a software issue, rename your /Backup directory in your Palm folder (on a PC it's found here: C/Program Files/Palm(One)/"your HotSync ID name truncated"/Backup) to something like "/BackupOLD". Now perform the HotSync, choose your HotSync name you've been using, and all your PIM data will return, but not the third-party programs. Test for functionality again. If all is good, start installing the old programs from your /BackupOLD directory one (or a few if brave) at a time.
If the unit does not work after a Hard Reset is performed correctly, then it may be Hardware-related. (If it's a connection problem via either BlueTooth or Wifi, be sure nothing has changed on the unit you're trying to connect to!)
Hope this has helped,
Wyrenut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Fatal error 70: Cannot open calendar database

    When I try to start my iPlanet Calendar Server(iCS) 5.0, the following error
    occurs:
    <P>
    Fatal error 70: Cannot open calendar database
    When this error occurs, first try to recover the database using the
    "csdb" command line
    utility. For more information on the
    csdb utility, please
    refer to the iCS 5.0 documentation at the following URL:
    <P>
    http://docs.iplanet.com/docs/manuals/calendar/ics50/ag/calagxa.htm#13586
    <P>
    If you are unable to recover the database using the
    csdb utility, use the
    following steps:
    <OL>
    <LI>Completely shut down the calendar server to ensure that there are no
    stray calendar processes still running.
    <P>
    <LI>Change directory to your iCS database directory (the default directory
    on Solaris is
    /var/opt/SUNWics5/csdb/).
    <P>
    cd /var/opt/SUNWics5/csdb/
    <P>
    <LI>Create a temp
    directory.
    <P>
    mkdir temp
    <P>
    <LI>Move all of the
    *.share files to the
    temp directory.
    <P>
    mv *.share temp/
    <P>
    <LI>Restart the calendar server.
    <P>
    <B>Note:</B> The *.share
    files will be rebuilt upon startup.
    </OL>
    <P>

    theFatal error 70: Cannot open calendar database error can occur after a migration from Netscape calendar server, using the ncs4migrate utility.
    The problem can be that the log* files in the csdb folder (or wherever you put the calendar database) are not owned by the same user that runs the calendar server - commonly called icsuser.
    ie.
    -rw-r----- 1 root other 5499425 Jun 25 14:17 log.0000000142
    will cause fatal error 70:
    change the owner, thus
    -rw-r----- 1 icsuser2 icsgroup2 5499425 Jun 25 14:17 log.0000000142
    and it should work!
    Regards,
    - jd

  • Duh.. cannot open calendar page to edit it.  What key option works??? Thanks

    Duh.. cannot open calendar page to edit it.  What key option works?? 
    First time in 20 years with Mac I am asking this kind of question.
    Thanks

    Found it>>> return and both mouse keys !!!!????????

  • Cannot open calendar in Mavericks

    I updated to Mavericks and now I cannot open calendar. I cannot revert back to snow leopard. How can I fix it so it will open?

    Well, apparently according to my research, the apps break after using crappy cleaning programs, Clean my Mac, Mackeeper and that kind of crap.
    appstore: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-appstore.zip
    textedit: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-textedit.zip
    terminal: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-terminal.zip
    preview: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-preview.zip
    mail: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-mail.zip
    calendar: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-calendar.zip
    facetime: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-facetime.zip
    contacts: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-contacts.zip
    maps: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-maps.zip
    quicktime: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-quicktime.zip
    ibooks: https://dl.dropboxusercontent.com/u/4956916/OSX/Base.lproj-ibooks.zip

  • Cannot open my library. iPhoto says I opened it before with a newer version which is not true.

    Cannot open my library. iPhoto says I opened it before with a newer version which is not true. I am using Snow Leopard and iPhoto 7.1.5 which seems to be the latest update. How can I reach my photos? I don't particually care for iPhoto anymore since I am using Lightroom now, but I would very much like to reach my picture files, HELP

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. 

  • I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    iLife '09 is not available as a download - it is only available as a purchase
    iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
    Exactly what did you do? And exactly what does the error message say?
    On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
    LN

  • Fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory

    Hi Folks:
    I am doing one Dll file for TestStand , and got an error : d:\teststand3.5\teststand 3.5\examples\modaldialogs\mfc\tsapivc.h(18) : fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory
    Could anyone help me out of that ??
    Thanks in advance !

    This type library for the adapter API is embedded in the teapi.dll. If you are using Visual Studio.NET, there is an attribute called tlbid that you can use with the #import directive in order to import that embedded library (see the MSDN documentation for more details). For example:
    #import tlbid(2)
    In VC++ 6.0, there is no way to import embedded type libraries. Therefore, you must use the attached type library file (.tlb) with the #import directive. For example:
    #import "TsAdpApi.tlb"

  • Cannot open Photo.library of other Mac User.

    Running Yosemite, and Photos 1.0 (Dutch version). As advised elsewhere, in order to allow Photo library being used by 2 users of same MAC, I created a 3rd 'shared data' user, to put shared Photo data. So with 1 of the users on MAC, I imported (old) iPhoto library in Photos, went fine, and copied the Photo.library file on the 'shared data' folder under folder Pictures. I created proper authorizations for both users to access this library. Now from the user by which I created this net Photo.library, I can open this library OK, but from the other user (same authorizations) I cannot open the library, error is 'Photo cannot restore permission'. I run the checkdisk program, run the program to restore permissions, but did not help. When I try to open this library on the 'shared data' user's folder from Finder, error says it cannot import pictures from the library. Thanks for advice. 

    2 disks, and buy a software to backup one disk to the seagate raid 1 ... sounds complicated to me, TimeMachine can't backup network disks. Fact is though that I can access the foto library from 1 other user on the MAC, so it isn't so that accessing other user's  library doesn't work. But it only works for 1 user apparently. Clearly not very well thought through by Apple.

  • Cannot open calendar app on my iPhone 5. Please how do I fix it.

    I cannot open the calendar app on my iPhone 5. It flashes for a second and then go back to home screen. I have already restarted the phone twice and force the app to close several times without success.
    Anybody can help please? Thank you.

    Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone reboots, see if you can open it. If not, the next step is restore from a backup, but if there is a corrupt file in there, it will copy over from the backup. The last step is a restore as new device. This will delete all data on the device. If it still will not work, the you would need to make an appointment at the Apple store to get the hardware checked.

  • Cannot open iphoto library in Photoshop

    I have updated to ilife11 and now when i open Photoshop and try to import a picture from iphoto i can see the iphoto library in Pictures but it is not highlighted and i cannot open it. Can anyone help.

    edit: if you were using Bridge as a photo navigation tool, please disregard my previous comments that I have now removed as they are no longer relevant.
    Message was edited by: roam

  • Cannot open iphoto library 5 with iphoto 8

    My old mac (ibook G4) still has iphoto 5 and this new one has iphoto 8. I cannot open my old library with this new version, and I have most of my photos in the old library!
    How do I open my copy of iphoto 5 with iphoto 8?

    Welcome to the Apple Discussions.
    Remember, once you open the Library with iPhoto 08 you will no longer be able to open it with the earlier version.
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' and point it at the v5 library. If iPhoto sees a valid library there it will open it.
    Regards
    TD

  • Cannot open aperture library in iPhoto

    I recently opened an old iPhoto library in Aperture. This changed the file extension, and presumably the file structure. Libraries are supposed to be interchangeable between the two apps, but now I get the following message when I try to open the libary in iPhoto: "To open this Aperture library in iPhoto, it first needs to be upgraded with Aperture 3.3 or later. Quit iPhoto and then open your library in Aperture to upgrade it." I'm running Aperture 3.4.5 and iPhoto 9.4.3. I've repaired permissions and rebuilt the database (and whatever the third option was when Aperture is launched with Command-Option). Any suggestions?

    Stephen,
    the problem is probably an inconsistent DateModelVersion.plist file in the Aperture Library.
    If the library cannot be repaired, try to restore this file from your backup, from a time when the library could be opened in iPhoto. If you have Code installed, you can try to edit the file manually.
    see joeholmes post:  Re: Help! Can't Open Aperture Library (Requires iPhoto 9.4?)
    or the manual fix by jashman: Re: Help! Can't Open Aperture Library (Requires iPhoto 9.4?)

  • I cannot open iPhoto library without upgrading

    I think I know the reason: There was recently an upgrade of Aperture, which I have purchased, which asked my to upgrade the iPhoto library. Anyway, iPhoto now says I need to upgrade iPhoto to open my library. And the only upgrade I see has to be paid for.
    Can anyone confirm this?
    Isn't it strange to force such an upgrade on customers?
    Is there a work-around to this problem?

    If Aperture is using your iPhoto library, you probably have got iPhoto '11, so you can upgrade iPhoto for free. Anyway, it's better to check this.
    Open a Finder window, choose Applications in the sidebar and you should see iPhoto. Right-click iPhoto and choose Get Info, so you should see the iPhoto version. If it's 9.x.x, you can upgrade iPhoto free of charge.
    Open the Mac App Store, go to Updates and install iPhoto 9.5 for free. If you don't see the update, try switching the OS X language to English in System Preferences > Language & Region, and restarting

  • I cannot open my library in Windows 8

    How do I open my library in Windows 8?  My ipod has been synced to my computer.

    Hi Allie,
    I am sorry its not here again.
    Just copy the contents of the word doc and paste here.
    Thanks,
    Samndeep

  • Cannot open "Dimension Library" - EPM issue?

    Hi Folks,
    I recently downloaded and installed/configured Planning 9.3.1 from eDelivery, but I'm not sure if ALL the required EPM Architect components have been properly installed. When I look at Windows Services, I see the following:
    Hyperion S9 EPM Architect Engineer Manager
    Hyperion S9 EPM Architect Event Manager
    Hyperion S9 EPM Architect Job Manager
    Hyperion S9 EPM Architect Process Manager
    However, I do not see:
    Hyperion S9 EPM Architect Data Synchronization ATS5, and
    Hyperion S9 EPM Architect Web ATS5
    Planning is working correctly in every way, except when I try to open "Dimension Library" or "Application Library" , I get an error saying - "Invalid or could not find module configuration". I get the feeling that this error is being thrown because EPM Architect was either not installed fully or I have not configured it to work correctly. During the installation of Planning I had selected the "Typical" installation.sFyi- I have Essbase 9.3.1 underlying my Planning module.
    Would appreciate any guidance on why my EPM Architect is not getting installed properly.
    thanks.
    Akshay

    Hi,
    These services should be created when you configure EPMA, they are created as part of the "Deploy to Application Server"
    If you run the configuration utility again, Select Oracle Hyperion EPMA.
    make sure you have run
    Register with Shared Services
    Configure Database
    Select "Deploy to Application Server"
    Make sure deploy as a service is ticked in the option screen.
    If you do all that and the services are not there but you can start the servers manually, if you are using tomcat there a couple of scripts to create the services in \Hyperion\deployments\Tomcat5\bin - installServiceEPMADataSynchronizer.bat + installServiceEPMAWebTier.bat
    Ok?
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • Generate TOC with Section Markers?

    It's been a while since I've had to setup and create a TOC for a single file long document, but I'm pretty sure that I've created TOCs this way in the past. So, why won't the text in Section Markers show up in the TOC? Is it even possible to generate

  • Purchase order - output type vendor different from PO vendor

    Hello, we have created a new output type that sends our purchase order as emails. The email will be sent to the vendor email address that is entered together with the output type under messages of a purchase order. We need the emails to be sent an in

  • Email Submit Button and Reader 7.0?

    I was just wondering if the email submit button works in reader 7.0? I created the submit button so that it sends out the entire PDF form and the data instead of just the raw data, but someone tested it in reader 7.0 and it gives a "this operation is

  • Automatic table partitioning in Oracle 11g

    Hi All, I need to implement automatic table partitioning in Oracle 11g version, but partitioning interval should be on daily basis(For every day). I was able to perform this for Monthly and Yearly but not on daily basis. create table part (a date)PAR

  • Office Pro 2013 installing in wrong language

    I started downloading Office Pro 2013 and the screens are in French.  I did not continue the download, but I cannot figure out how to re-start it in English.