Palm TX - Migration from Vista laptop to XP netbook

Firs, generally satisfied with Desktop 6.2.2P working with my Thinkpad T61, Vista Home Premium.
Heck! it's too big, heavy and expensive to take backpacking for 2 months in SE Asia. Now I have an Ideapad S10e with XP, 160G HD and 1G RAM, no Bluetooth. Need to take the Palm TX when treking or walking. I'd like some help on the possibilities of using the TX with my Ideapad XP netbook. Some questions to get my head right and then any advice you have that will achieve what I want; right the first time, without losing current functionality, specially the install toole
(1) If I down load Desktop 6.2.2 to the XP netbook and sync, will alarm bells go off requiring me to either stop or answer zillions of questions that will go nowhere or screw up the information on the TX? I intend to retain the same identity. If on the other hand it works, will it work on just the XP or the Vista machines or both?. I'll be satisfied with one at a time; the Netbook, unless some functionality gets lost.
(2) Read somewhere that 6.2.2 was introduced stricly for Vista. Does this mean that (1) above will not work, because the TX is syncd with Vista based 6.2.2?
What is the smartest decision I should settle for while making sure I do not lose any functionality that I have with Vista and 6.2.2? Gotta get the TX working with XP no different that with Vista.
I'm leaving in 2 weeks; mid Sep and I have to have this behind me and trouble free well befoe then.
Thanks
Post relates to: Palm TX

The test user make it so when you sync your TX it will import your username and all the apps, data, and settings from that device to your netbook. You can remove the test user once the device is done syncing and you have your data.
When you install Palm Desktop it requires that you have a username. Sometimes if you pick the same username it says you cannot sync to this PC. Created the test username bypasses this.

Similar Messages

Trying to Home share an itunes library from Vista laptop to Windows 8 laptop

Alright, so both laptops have been setup the same, home sharing turned on, exact same apple id and password. Both computers can see each other in the dropdown menu for "library", HOWEVER, while the Vista laptop can see & import the library from the Windows 8 laptop, then Windows 8 laptop cannot see & therefore not import the library from the Vista laptop & out of the system without issue, the router has been checked to ensure that nothing is standing in the way on that end either. Is this some sort of backwards incompatibility? Or am I overlooking something obscenely obvious? Any and all help is welcome, I have looked at a large number of discussions here and throughout the web already, nothing seems to work for my situation. Please help!!!

Hello there MicknMadd,
It sounds like one of your computers can see the others library and import from it, but the other does not. You've done a lot of great troubleshooting and verification already, and I would recommend steps 5-7 from the following article to help further troubleshoot:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
5. Check Firewall settings
If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
Block all incoming connections
Allow only essential services
If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
For more information on ports used by Apple products, see Well known TCP and UDP ports used by Apple software products.
6. Quit and reopen apps and iTunes
If connectivity issues persist, quit and reopen iTunes on your computer. Then, quit and reopen the apps on your iOS device.
Note that Home Sharing cannot transfer or stream audiobook content purchased from Audible.com. See Audible.com for information on using their content with multiple devices.
7. Restart your network router
Restart your home network router using the method recommended in documentation from the manufacturer. This may include disconnecting the power cord for thirty seconds or more.
Note: During this period, Internet services such as a VoIP-based phone will not work, and any additional routers may need to be reset in sequence.
Thank you for using Apple Support Communities.
All the very best,
Sterling

HP Photosmart c309 and printing from Vista laptop on wired/wireless network

Ok going to be as thorough at possible here.
Its a brand new HP Photosmart c309 which I received this past Weds, so far so good both my Wife and I are enjoying it. Now I have it wired into my home network which consists of a Linksys switch in our home office and Netgear wireless router in the basement. The Linksys switch is wired to the router in the basement for internet/network connection...I have my Dell workstation running Windows XP SP3 (with all the latest patches from Microsoft, Mcafee AV) and the photosmart printer wired to the switch. I installed the HP software and drivers from the disk on the XP workstation and all is well...prints, scans and I'm able to view the printer settings, ink levels and what not.
NOW my Wife's Dell Vista laptop (which is patched to the latest from Microsoft, Mcafee AV) is getting really annoying. First I hate Vista but that’s another story...the Vista laptop connects to our home network via the wireless network through the Netgear router. So I followed the same steps as my XP workstation, it finds the printer during setup and all is well till the part when it wants to send a test page...so I opt to skip the photo test page and just do a standard one. Well it "sends" a test page or at least it looks like it does but nothing comes out of the printer (ie no activity from printer). The printer icon shows up in the system tray in the lower right hand corner of the screen near the time and when I put the mouse pointer over the icon is says "0 in queue" so I double click the icon to see if I can get more info and nothing happens. Right click the icon and choose open all active printers and again nothing. The printer icon is in the system tray for about 10-15 seconds and then disappears.
So I'm a little confused here, I check the printer in "printers & faxes" and both it and the fax part are listed...the printer even says it’s in "ready" status. I start the HP solution software on the laptop and I am able to scan from the printer to the Vista laptop fine, I'm able to view printer settings, network settings, ink levels and what not. I JUST CAN'T printer to it.
I tried another test page from the printer properties within Windows, again the icon shows up in the system tray and it says "0 in queue" and the icon disappears after 10-15 seconds. I then try to print a picture using the HP software and the same thing...icon shows up in system tray "0 in queue" and it disappears.
Did I do something wrong or am I missing a special step for Vista machines? I did uninstall and reinstall software/drivers and manually removed the printer and then reinstalled everything with no luck and no change...still acts the same.
I'm lost at what else to try. I think I tried the obvious stuff. I've searched the web to come up blank with a similar situation like mine...I've seen others complain about printing 1 page documents and the printer prints 3,6,16 pages at a time which is the opposite from my situation.
Any input/advice would be greatly appreciated.
Thanks in advance,
Bruno

Have you received an answer to this question? I'm having the exact same problem. Spent 4 hours on the phone with HP tech support and no solution.

E1500 router only local access from Vista laptop

I upgraded my old Linksys wrt54g to the E1500. All the XP os are connected via cable and wireless connection, but the Vista laptop i get local access only connection error. This laptop used to connect on the older router using wep but with E1500 wpa-2 it cannot connect. I am unable to ping the router from the laptop wireless. Connecting ethernet cable it works fine and logging in as a guest works does too. Any suggestions on what could be wrong?

Disable the security on the router and Vista compter and try to connect with no security. If successful go back and enable security and try again.

C5280 no longer prints wirelessly from Vista laptop after purchase of new Win7 PC wired to C5280

My Windows XP desktop was wired directly to the C5280 and I was able to print through my home network from the Win Vista laptop downstairs. Since I purchased a Win7 PC and replaced the Win XP one, the laptop cannot print wirelessly through the home network. What can I do to regain that functionality? Thanks.

OK, first wireless Gateway (modem/router combo) units are terrible for wireless connection. It is always, always best to use a separate modem and router in your network that YOU have control over instead of Comcast. If you have your old router it would be best to call Comcast and have that Gateway put in Bridge mode (disables the router section) and connect your own high quality router. With that said, let's try this. Set the router to a fixed wireless channel like 1, 6 or 11, never 'auto'. If you still can't connect, remove all security off the routers SSID. Now try to connect to your SSID with no security. Are you successful?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Print Wirelessly from Vista Laptop

I had wireless printing working from my old XP laptop, but I can't get it to work with my new one running Vista. Airport Extreme connected to my imac. File Sharing and Print Sharing are turned on in preferences. I can see the printer from my laptop, but when I select print it says access was denied...unable to connect. In Vista in the control panel the printer shows up with a check mark and a green symbol on the network link. Any guidance greatly appreciated.

Printer sharing is also turned on in Visa Control Panel

How do I copy an iTune movie from my laptop to my netbook?

OK, I hope you can understand what I'm trying to do. I have iTunes on my laptop where I sync my iPod. I loaded iTunes on my netbook (but don't plan on syncing with my iPod, leaving that for the laptop). Anyway, I have movies on my laptop and iPod. I can use my account on my netbook, which is fine.
Now I copied a movie from my laptop to a flash card. I took the flash card to my netbook, it plays the movie fine, but I wanted to copy it to the iTunes on the netbook so I don't have to carry the flash card around. I did a copy on the drive the card was in and did a paste to "Program Files" then to "iTunes", figuring it will go to the right spot. Well, it showed that it was there but when I tried to play the movie it said it couldn't locate it.
Where am I going wrong in the pasting of the movie after I do the copy? Can it be done?

Make sure that the option to "copy files to iTunes Music folder when adding to library" is set in the iTunes -> General preferences. Then just drag the movie from the flash card to the iTunes window. iTunes will copy the movie to the correct place.
Content you copy into the Program Files -> iTunes folder will never be recognized by iTunes (that's not where iTunes keeps it's media) so you can delete that copy of the movie.
Regards.

Can't send emails after migration from Vista PC to W7 PC. Tried Mozbackup and Windows Easy Transfer. Settings have transferred ok, it just won't send emails.

I recently migrated my Tbird from a Vista PC to a W7 PC using Mozbackup. Transfer was fine with all the settings transferred apparently correctly. But now I can receive emails but not send them. Sent emails show in 'Sent Items' but are not received the other end. Also tried the migration using the Beta 1 version of Mozbackup and also Windows Easy Transfer with the same result. IMAP and POP3 accounts are both affected. Neither can send emails. I get no error messages nor any bounceback.
Found on one forum that AVG can block outgoing emails so altered the AVG settings which seemed to solve the problem. The next morning the problem was back. I uninstalled AVG completely but it made no difference. I do have MicroSoft Sec Essentials but the problem was there before that was installed.
Using the BT Home Hub 5 on BT Infinity broadband. It can't be the router though as the old PC was sending emails fine. Although I did have the suspect AVG settings, removing it has not solved the problem.
The outgoing email settings seem to be fine. Any thoughts?
Simon

Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]

Can't connect to E1200 from Vista Laptop.

I recently installed an E1200 router for a friend. We both have HP laptops running Vista. Mine connects wirelessly ok but his doesn't. The Network and Sharing Center on his shows a connection between the laptop and the router and the router is identified correctly. But the link is broken between the router and the internet. I did a little troubleshooting before I ran out of time.
I set up the router using the the Cisco Connect cd. Didn't have a thumb drive so I went to each laptop and added a wireless profile for the router using the same Security Type (WPA Personal), Encryption Type (AES), and Security Key. Mine connects, his doesn't.
IPCONFIG/ALL shows that both laptops got IP addresses in the DHCP range of the router. The DHCP client list on the router shows the same. I tried rebooting the router, deleteing and re-adding the profiles, same results. Aside from IP and mac addresses the IPCONFIG /All's are identical.
I won't be able to get out there for a few days. I have a list of things to try and was hoping someone would have other suggestions.
His laptop is at Vista SP1 and mine is at SP2 plus other patches because I run automatic updates. I intend to bring his laptop to the latest patch levels. Our wireless adapter models are also different so I'll download the latest drivers for his.
I'll update the router firmware if necessary and set the router back to it's default configuration.
I'll use Cisco Connect to reconfigure the router and change the SSID and this time create setup keys.
I'll configure both laptops using the setup key and see if they connect.
I've read something about a DHCP broadcast flag problem between some routers and Vista. There is a registry edit fix for the problem from Microsoft, but it doesn't seem to apply in this case because the IP addresses are assigned correctly
Any help will be most appreciated.
Solved!
Go to Solution.

Great suggestion, I never thought of trying WEP.
I don't remember the exact name of the adapter on my friends computer, but your question prompted me to look through the HP wireless forum and I found that there are compatability issues with the Vista Atheros ( which sounds familiar) driver and and the E series routers. There is a driver update from HP available to fix the problem and I'll try that also if the adapter is Atheros. I think I'll take Vista at least to SP2 first.
The adapter on my laptop, which works, is an Intel Pro/Wireless 3945ABG.
I'll get out there the end of the week and update you with my progress.

Migrating from Windows laptop to Macbook Pro - HELP

How do I keep my current iTunes settings/music/phone backup/etc. when going from my Windows laptop to my new Macbook Pro? I moved the "itunes" folder to replace the one on the new Mac but itunes didn't recognize that it was there...The main thing I want to keep is my phone settings/purchases. Please help. Thanks!

These directions tell you how to move your iTunes library from one computer to another computer. While they talk about using an iPod, if you ignore that part & follow the directions, you'll be OK:
http://support.apple.com/kb/ht1329
Or, you could make an appointment at an Apple store, take both computers & your phone, and the geniuses will do everything for you, make sure all is working properly & explain everything to you. There is no cost for this service.

Having trouble migrating from macbook Pro to macbook Air?

Apple has kind of messed up with migration from older laptops to Macbook Air. With 140 GB to transfer onto my new Macbook Air, I took a big gulp when my new Air told me casually that it would take about 36 hours to migrate my stuff from my Pro to the new Air over the wireless network. OK, so I have a slow network, sue me. Apple's technical help was no help, and that's getting pretty common. The solution? A data transfer USB cable (PCMACLINK2 USB to USB Data Transfer Cable for Windows and Mac, Startech). A simple USB-USB connection and data transfer rates of around 480 MBS. I think we are good to go. BTW, why didn't Apple release a Firewire/Thunderbolt dongle? Making a new set of dongles for every new Mac seems to be de rigeur these days, so why not add one more? Oh, and Apple doesn't seem to carry a data transfer cable. FAIL!

Hello,
I've been pondering getting a Macbook Air but I want to find out if I can copy over Endnote X4 and Office from my Macbook Pro (Snow Leopard) to a new Macbook Air (Lion).
Is it just a matter of drag and drop or using Migrate Assistant or is there anything to worry about between different Macbooks, different versions of OS or some restriction on copying Apps?
Also, assuming a migration is possible, can I just use my Timemachine external drive or should I buy a cable instead?
Thanks,
Jason.

Calendar or PIM Sofltware Suggestions Migrating from Lotus Organizer Palm Centro Unblocked

Any suggestions for Calendar and PIM software for migrating from Lotus Organizer?
Lotus Organizer 6.1 does not support Palm Centro. Palm Desktop is a shell of a program instead. I need a real PIM that I can use.
And no Outlook isn't much better. I've now experimented with both Palm Desktop and Outlook.
Key is that they must work with Centro.
Paul
Vista, Palm Centro Unblocked
Post relates to: Centro (AT&T)

The only app that I know of is called Intellisync (which is now owned by Nokia I think. There's been a lot of company buyouts). This software will let you sync your Palm to just about anything (Outlook, Louts Notes, Novell GroupWise, etc).
Head on over to their website at: http://www.sync.com/
Although, I'd hurry. Looks like they're going to stop selling it in a couple weeks.
Post relates to: None

How do I get rid of the Microsoft Setup Assistant loop? I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word, and stuck in a loop?

I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
Cheers,
Jack

First, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop). Use this to help you do this: http://support.apple.com/kb/PH3606
Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts. Tap the delete key on your keyboard (or right click /control click a contact and select delete).
You iPhone, iPad and iCloud.com should not be empty for contacts.
Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
Next, go back to iCloud.com and import your contacts (those exported .vcards). You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
Good luck.

HT4759 I am using Windows 7 Ultimate OS which is a upgarde from Vista on my laptop with Microsoft Office 2003. I am trying to use ICloud with an IPhone 5 and IPad mini to stream photos but can't do this with my laptop or devices using my Three network. Wh

Can i use my laptop which is running Windows 7 Ultimate upgrade from Vista to stream photos using ICloud. The outlook programme used is 2003 and i my devices are IPad mini and IPhone 5. My problem is that i able to drag pictures into ICloud for it to send to my devices but nothing happens. Why?
I am grateful for any advice.

A hard drive if it has failed will sometimes allow you to boot into windows but may not work completely (Eg: In a scenario, where system partition ;where windows is installed works fine but logical partition of hard drive has gone bad).
On certain conditions, if the hard drive is on verge of failure may/may not respond completely. I would suggest you to run a diagnostics using Seagate Seatools which works on any hard drive irrespective of manufacturer to actually confirm if your hard drive has failed.
Also, any hard drive can fail in spite of it been 1yr old or 1day old as its all manufactured in bulk and most of it comes from China
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

I have recently upgraded my laptop from Vista to Windows 7. All my music is on a windows file, how do I move it to i tunes library

I have recently upgraded my laptop operating system from Vista to Windows 7. i tunes is asking me to sync my i pod, because it is recognising the Vista laptop and not the Windows 7. All my music has gone from i tunes library but it is all stored in Windows music folder(s). How can I move it all to my i tunes library?

So your iTunes library is now empty after the upgrade?
Simply drag the one folder (containing all of your music) into your new empty iTunes library or choose File -> Add to Library in iTunes.
Otherwise, if they aren't all in one folder, you'll have to drag each seperate one into iTunes.
B-rock

Palm TX - Migration from Vista laptop to XP netbook

Similar Messages

Maybe you are looking for