Palm TX no longer recognizes SD cards!!!

I have two Palm TX's and have been using Lexar SD, Sandisk SD, and Sandisk Ultra II SD cards (all are 2G cards) for months without any problems. This past week, I went through airport security with both TX's and all these cards, and now all but 1 SD card is NO longer recognized by the TX. I have done a soft reset, a hard reset, and still these cards cannot be recognized (the TX's message) by the unit. The odd thing is one TX can recognize one of the 2G cards just fine. Weird
I tried a 512M Lexar SD card, but it couldn't recognize that one either and the 512M card never went through airport security, it stayed home.
Any idea what is wrong or what I can do? Anyone experience this themselves?
Thank you - R
Post relates to: Palm TX
Message Edited by rouge2009 on 04-06-2009 11:23 AM

To clarify, they both went through the metal detectors and were placed in my carry-on luggage. Everything I've read online so far tells me that these machines should not harm my Palm TX, but both are experiencing the same issues. They can no longer recognize ANY SD cards. Is the card port shorted out or something? When I insert a card, the TX asks me if I want to format it, when I tap 'yes', it then tells me it cannot recognize the card. When I tap on 'card info', it recognizes there is an SD card inserted, but cannot read any of the specifics of the card. PLEASE, someone...help.......

Similar Messages

HT4101 My Apple camera kit no longer recognizes SD cards. I'm running iOS6.1.2.

I have used the Apple camera kit with a previous verson of iOS and it worked fine, but since I upgraded to iOS 6.1.2 the pad no longer recognizes the SD reader or the USB connector. However, when I go to "settings","about" the hardware is listed. Is this a software problem or is the camera kit obsolete?
Thanks
Wes

Mine works.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

X201 Access Connections doesn't recognize WiFi card

Hi
A week or so ago I ran Lenovo System Update, which prompted me to update the drivers for my WiFi card (Intel 6200-AGN). After the update Access Connections can no longer recognize the card. Windows still connects automatically to wireless networks through the built-in software, but Access Connections not working is really bothering me.
I've tried rolling back the wireless drivers (my current version is now 14.3.0.6, dated 10/27 2011), but with no luck. As far as I can see, there have been no updates to Access Connections for quite a while (it's hard to tell due to system update itself recently being updated), but is it worth a try uninstalling it and reinstalling an older version? My current version is 5.97, oddly the version listed on the support page for the x201-3626 is 5.62, but all my Lenovo software comes from Lenovo System Update.
Thanks in advance for any and all suggestions.
Solved!
Go to Solution.

It's a new version AC related issue. Uninstall it and install previous version 5.93, manually.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Windows 7 no longer recognizes my Pre

Not sure when it happened, maybe after I updated to OS 1.4.1.1, but my Windows 7 PC no longer recognizes my Pre. It used to, but now it doesn't. I have tried a cold restart for both the Pre and the laptop but still no success. Has this happened to anyone else? Any ideas from anyone?

Hello Luke and welcome to the forums;
There are several possible solutions to this issue, and we have a fairly comprehensive KB article that describes the available fixes. I recommend going through each step in order, testing for a connection after each step.
http://kb.palm.com/wps/portal/kb/common/article/25017_en.html
Hope this helps,
TreoAide

ITunes 10.1 upgrade no longer recognizes iPhone 4

I've just upgraded my iTunes to 10.1, however it no longer recognizes my iPhone 4.
I've restarted both computer and iPhone with no luck. I've also tried multiple USB ports, still no change. iPhone is running OS 4.1
Anyone else experiencing this issue?

try to change usb-port. probably you have a problem with one.
http://www.sc4.edu/surveys/placement/cute/1/map.html
http://www.sc4.edu/surveys/placement/cute/2/map.html
http://www.ub.edu/histeco/p2/eng/sys/6/map.html
http://www.ub.edu/histeco/p2/eng/sys/5/map.html
http://www.kappasigma.neu.edu/rush/card/1/map.html
http://www.kappasigma.neu.edu/rush/card/2/map.html
http://www.sc4.edu/surveys/placement/cute/1/index.html
http://www.sc4.edu/surveys/placement/cute/2/index.html
http://www.ub.edu/histeco/p2/eng/sys/6/index.html
http://www.ub.edu/histeco/p2/eng/sys/5/index.html
http://www.kappasigma.neu.edu/rush/card/1/index.html
http://www.kappasigma.neu.edu/rush/card/2/index.html

Premiere Elements 11 no longer recognizes Canon HV30

Any help or suggestions would be appreciated to my problem. I have been using PE 11 to download HD camcorder footage from my Canon HV30 camcorder to hard drive. I've gone through about 15 tapes and all was going well. Two days ago I went to download the next tape and PE no longer recognizes the Canon.
My setup: Windows 7. Canon HV30 connected to PC using Firewire cable. Drivers updated, etc. The cable appears fine (if I force PE to switch to "standard definition camcorder" the Canon appears as "Microsoft Camcorder" and PE will control the camcorder). I have tried plugging/unplugging cable at various times; starting PE with and without camera plugged in; uninstalled and reinstalled drivers for the firewire card. I am now at my wit's end.
The only change between when I last downloaded footage on Sunday and Wednesday was a MS Windows update and Quicktime update. So I have uninstalled Quicktime. Went through the same tests: start with/without Canon turned on; reboot, etc. Nothing works and I'm at a loss. Any help or suggestions would be greatly appreciated. Thanks.

Pacoinmass
First thing, quickly reinstall the latest verison of QuickTime or use the version that was just updated. QuickTime is a requirement.
If you want the 7.7.4 prior version, please try the following link. But, for now I would go with the latest version of QuickTime 7.7.5.
http://www.oldapps.com/quicktime_player.php
Download and install HDVSplit and do a capture firewire with it. That will give you split clips MPEG2.m2t to put on your Timeline.
Here we are using it as a troubleshooting tool. If it works, it may become your permanent tool.
Did you remove the Windows Update?
In Edit Menu/Preferences/Scratch Disks, where do you have the Captured Video and Captured Audio fills directed? How much free hard drive space is at that location?
Please review and let us know if any of the above had any impact on your situation.
Thanks.
ATR

IMac no longer recognizes bluetooth after installing XP

I just installed XP using Boot Camp 2.0, and now my computer no longer recognizes the bluetooth internal card (not in XP or OSx). When I go to system preferences, the bluetooth icon doesn't even show up and even when I go to "about this Mac" and look under bluetooth it says "No information found." Any ideas? Both in XP and OSx I have gotten a problem code 43...what does that mean??
This is my first Mac...so this is all new to me, but any advice would be greatly appreciated!
Thanks in advance!
Brian

Hi. Thank you for your response. I actually didn't get to test it out because before going to bed, I shut everything down, unplugged it, and said a prayer. (All of which I had done earlier in various combinations, except the prayer part.) This morning I plugged the computer in, turned it on, held my breath, and plugged the MyBook in - it recognized it and I downloaded everything onto my iMac before it could change its mind.
I'll keep a copy of your reply so that I know what to do the next time I pull a stunt like this.
Thanks, again, for the help response.
~alison

HP Photosmart 8250 will no longer recognize photos downloaded from Facebook. Any ideas?

I used to download and print photos from Facebook, but the HP Photosmart 8250 will no longer recognize these files on the SD card. I believe Facebook recently updated it's photo format (incidentally, older images on Facebook still work fine). Any ideas?
I'm running Windows XP, and have not changed anything on my setup.

The troubleshooting steps in this document may help resolve the issue of black not printing. If not see the post here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

IPhoto 08 no longer recognizes my pictures!

Recently, when I opened IPhoto 08, it gave me a message that I needed to upgrade my thumbnails (I do not remember what the exact message was). I clicked OK. Ever since, IPhoto no longer recognizes my pictures. It is as if they are completely gone. Thankfully, that isn't the case (they still come up when my screen saver kicks in).
I tried reinstalling ILife 08 but that didn't have any effect. I thought about reverting back to my previous version and re-upgrading, but I wanted to check here first.
Quick responses would be appreciated - I really need access to my pictures!

Angella:
Welcome to the Apple Discussions. You're experiencing a damaged database file. Try the three fixes below in order as needed:
1 - launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all options.
2 - rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos.
3 - start over with a new library and import the Originals folder from your original library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open Photo window
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
To recover a little easier from similar damage see the tip at the end of my signature below.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

PB G4 1.33GHz - New hard drive, doesn't recognize Airport card - did before

My old hard drive crashed in my Powerbook G4 1.33, so (after a very long wait), I bought another one on Ebay and installed it. It is working just fine now, but my computer no longer recognizes the AirPort card that I know is installed inside. It worked perfectly right up to the moment my computer crashed, so I'm at a loss. I've spent about 6 hours aimlessly searching for help, information, or consolation about this.

My old hard drive crashed in my Powerbook G4 1.33, so (after a very long wait), I bought another one on Ebay and installed it. It is working just fine now, but my computer no longer recognizes the AirPort card that I know is installed inside. It worked perfectly right up to the moment my computer crashed, so I'm at a loss. I've spent about 6 hours aimlessly searching for help, information, or consolation about this.

Turn iPhone 4s into iPod Touch - will not recognize sim card

My iPhone 4s will no longer recognize a sim card. I didn't trade it in b/c the Apple salesperson said I could still use it as an iPod touch. (I want to use it at home to play Pandora/iTunes/Sirius over wifi to bluetooth speaker.) The salesperson did not warn me not to reset the phone.
After completing the reset, it will not allow me get past the "no sim card" message. How can I bypass this in order to use the phone as an iPod?

Yes - I took it to ATT and they put in 2 different new sim cards. It will not recognize them at all. I took it to Apple and they said it was hardware (though after reading other discussions here, I am more suspicious of iOS 7).
They offered a trade in but I asked if I could still use it as an iPod touch. The genius dude said yes, but did not not tell me I could never reset it. Very frustrated.

IMac, suddenly, no longer recognizes Cannon PowerShot SD750

For some odd reason my mac no longer recognizes my camera. It worked fine a week ago but when I plugged it in today, iPhoto doesn't automatically open and it doesn't even show up on my desktop. The only place where I can find it is in the system profiler, under the USB section. I tried repairing the permissions and restarting my mac and formatting the card in the digital camera but, so far, no success. All that happens when I plug the camera in is that the last photo viewed on the camera shows up on the camera's lcd display. This is pretty frustrating and any help would be highly appreciated.

I'm not sure that iPhoto's the problem - after all, Image Capture doesn't see the camera either, right?
However, to re-install iPhoto
First: *Back Up Your Library*
1. Put the iPhoto.app in the trash (Drag it from your Applcations Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
Regards
TD

I recently upgraded iTunes to 11.1.4.62 and then itunes would no longer recognize my iphone 4s and iPod

I recently upgraded iTunes to 11.1.4.62 and then itunes would no longer recognize my iphone 4s and iPod although I can see the iphone but NOT the iPod on the computer (windows 8.1 Pro). I checked everything , cable, services, stop and start and automatice, etc.and went through all the steps on the apple support site, to include removing all apple software in the designated order and reinstalling it. iTunes still doesn't see the iphone.
The Apple iPhone shows up only under protable Devices in the Device Manager window and has a Yellow ! warning triangle, and there is no Apple USB controller in the devices menu.under Universal Serial Bus Controllers. When I look under the properties of the Apple iphone, it says in Device Status, to reinstall the drivers for this device (Code 18).
When I do this, I get the following: "Windows found driver softweare for you device but encountered an error when attempting to install it" Apple Mobile Device Driver One of the installers for th this device cannot perform the installation at this time. I tried both suggested locations on the C: drive.
Also I can't seem to find out how to install the Apple USB Contoller or is that related to the problem above?
The iphone and my ipod work fine with this version of itunes on Windows 7 on my laptop. is it possible that I am missing a critical update from Microsoft on the driver and USB controller? I have been leery of installing them since my computer had problems with some updates in January.
I 've tried every thing listed in this forum, I think, and the Apple support page on this subject. Please help!

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

I'd love some help trying to figure out why my 2008 MacBook no longer recognizes my external drive and now is not downloading photos from my iphone....?

After many years of having no problems at all on my Macbook, I recently figured I should finally upgrade my OS. I did that about three weeks ago, updating to Snow Leopard (10.6.8). I used Time Machine at least once after the OS upgrade but now Time Machine no longer recognizes the external drive I have used for all these years to back up. The MacBook does not "see" it. (Disk Utility does however.) The computer then also stopped recognizing another La Cie back-up that I have and now... my iPhone cannot download photos? Yikes.
I have, of course, shut down numerous times, used different cables (that worked for some) and the two USB drives. I even used a firewire. Nothing worked. I also tried to "Repair disk" on Disk Utility. It didn't work either, giving me an error (that I didn't save, sorry).
I read many other discussions on the file format of the external drive and of course I'd be happy to reformat the external drives--however, it is obviously a tad nerve-wracking to reformat drives before having an accessible back-up. Suggestions? I do not remember what file format they have but am pretty sure it's not the Mac file system someone mentioned. The drives are a 2009 WD "My Passport Elite" and La Cie 2007 d2 Quadra,
In terms of other hardware available, we do have another MacBook Air but it has started rejecting both drives as well (without the Snow Leopard upgrade). We have an old Dell but it wouldn't have the disk space to help out much.
Any thoughts on the process involved would be welcome. Any ideas on the iPhone rejection would be helpful as well! It is a 30gig iPhone 4 that has 20 or so gigs free (not clear as iTunes says that there are abour 18 Gigs on the phone but 24 free gigs? I may be bad at math but that's 40 gigs...).
I am checking out iCloud but apparently there are only 55 gigs available?
Will be glad to hear any thoughts. Thanks!

Good afternoon Lyssa,
Phew. First of all, thanks in advance...these blogs are always comforting help!
So, to answer your questions: For the age of the hard drive.Well, I added memory a couple of years ago (RAM and hard drive). Being a mom leads me to eat up a fair amount of gigs with photos of my kids and, in fact, I think I entirely replaced the original drive, so it is a couple years younger than 2008 since I did that in March 2010. If there is some way to verify that (whether or not I replaced the entire drive), I'm all ears. I have 311 Gigs free, so it is not a space issue. I verified the startup disk on Disk Utilityand nothing showed up.
Question 1- What formats...
The La Cie is format Windows NT Filesystem 3G ....At the time that I bought it I was still using a PC as well as a Mac and was told by afriend to use this format...
The WD is Mac OS Extended (Journaled). I again tried to repair the WD last night and this is the error message: "Error: DiskUtility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
Also, Time Machine tried again to back-up and gave me this error: "Files can't becopied onto the backup disk because it appears to be 'read only'. You may needto repair or reformat the disk using Disk Utility. If the disk can't berepaired, you must use a different disk for backups. Open Time Machinepreferences to select a different backup disk."
Question 2. Other cables...
I used two other cables with the WD and that didn't change anything.
Question 3... Fire Wire from the La Cie
Yes, I used the Firewire cable from the La Cie and it is indeed present, though still not visible in Finder. Since it is not Mac OSExtended I know that I can't use Time Machine with it.
So, in summary...
I can plug in the La Cie and it is functional on the MacBook, visible on Disk Utility but not visible in Finder. The WD drive is not visible and not functional. So we can think it is indeed the WD that is not working.... Also, the iphone photos did, in the end, get downloaded, so it is not something more general.
Causes...
I forgot to mention that there is a "lost+found" file on the WD which apparently points to a UNIX /OS issue?
Some kind of "insurance"?....
I'm curious about how people avoid this kind of issue. You just regularly replace back-up drives and hard drives before problems come up? Time Machine is great and saves many of us from disasters, however, knowing that your Time Machine back-ups are vulnerable makes the whole system insecure. No way to have alarms ring before the drive goes out?
As for ways ahead...
It seems that I ought to be able to copy off of the WD to the MacBook then erase it and reformat it and start over again. However, I haven’t been able to see its contents except on random occasions. If you have any ideas on how to copy the Time Machineback-ups from the WD, again, I'm all ears!
Good afternoon Lyssa,
Phew. First of all, thanks in advance...
So, to answer your questions:
For the age of the hard drive. Well, I added memory a coupleof years ago (RAM and hard drive). Being a mom leads me to eat up a fair amountof gigs with photos of my kids ….and, in fact, I think I entirely replaced theoriginal drive, so it is a couple years younger than 2008 since I did that inMarch 2010. If there is some way to verify that, I'm all ears. I have 311 Gigfree, so it is not a space issue. I verified the startup disk on Disk Utilityand nothing showed up.
Question 1- What formats...
The La Cie is format Windows NT Filesystem 3G ....At thetime that I bought it I was still using a PC as well as a Mac and was told by afriend to use this format...
The WD is Mac OS Extended (Journaled). I again tried torepair the WD last night and this is the error message: "Error: DiskUtility can’t repair this disk. Back up as many of your files as possible,reformat the disk, and restore your backed-up files."
Also, Time Machine tried again to back-up and gave me thiserror: "Files can't be copied onto the backup disk because it appearsto be 'read only'. You may need to repair or reformat the disk using DiskUtility. If the disk can't be repaired, you must use a different disk forbackups. Open Time Machine preferences to select a different backup disk."
Question 2. Other cables...
I used two other cables with the WD and that didn't changeanything.
Question 3... Fire Wire from the La Cie
Yes, I used the Firewire cable from the La Cie and it isindeed accessible, though still not visible in Finder. Since it is not Mac OSExtended I know that I can't use Time Machine with it.
FYI...
So, in summary... I can plug in the La Cie and it is “functional” on theMacBook but not visible in Finder. The WD drive is not visible and notfunctional. So we can think it is indeed the WD that is not working.... ALSO,the iphone photos did, in the end get downloaded.
As for ways ahead…
It seems that I ought to be able to copy off of the WD tothe MacBook then erase it and reformat it and start over again. However, Ihaven’t been able to “see” its contents except on random occasions…
Any further thoughts are welcome!

ITunes and iCloud no longer recognize Outlook on my computer

Since I got my iPhone several years ago, I have used Outlook via iTunes to sync my calendar, contacts, and other information.
I currently have an iPhone 4 with OS 5; I unfortunately have iTunes 10.5.2 running on a Windows 7 operating system.
I say "unfortunately" because despite my satisfaction with how these things all worked together, I am now totally fed up with Apple and it's supposed updates.
Today is Dec. 14, 2011. Two days ago, Apple released an "update" to supposedly address an audio issue. This morning, my computer and iPhone spoke to each other using iTunes -- I chose not to use iCloud when I downloaded the new OS 5.0 because I was not satisfied that it was consistently updating what I needed on my phone. It seems all it wants to do is update to iCloud.
This morning, an Apple alert about a new update showed up on my screen and I said okay to install because in the past there have been been few issues. NONE have caused my iTunes to insist there is no supported calendar program or to not show Outlook as an option for contacts.
This morning pre-update: everything worked as it was supposed to; after the update: NOTHING is working the way it is supposed to.
This ***** and is stupid, APPLE. It is very easy to get another kind of smartphone and these are all catching up with iPhone.
Issuing updates that make the system not work and WASTE HOURS OF MY TIME is no way to keep me as a customer or a way to encourage me to buy more apple products.
IN SUMMARY:
iPhone 4 with OS 5.0
iTunes 10.5.2 with Dec. 14 update
NO LONGER RECOGNIZES OUTLOOK ON MY SYSTEM.
I have wasted hours trying to fix this.

Hi, Linda from Folsom. Thanks for the message.
While I do run iolo system mechanic, my issues did not start until *after* I downloaded iTunes 10.5.2.
On the same date I updated iTunes, I also downloaded a Java update. I did these one after the other so didn't now which updated started the issue.
I later found that my issues were also related to iCloud usage for syncing, which I resolved this week by eliminating iCloud from my life (other than backing up my iPhone).
I posted something in the community about how I undid everything iCloud did to my Outlook, but my solution is only for those who no longer want to use iCloud with Outlook.
That's an interesting point about the iolo system because I didn't have any issues at all with it (until I updated iTunes).
I had a very similar system setup at the time as you do:
iPhone 4 with OS 5.0.1
Outlook 2007 (now I have 2010 version)
iTunes 10.5.2
Windows 7 home premium (now I have the Windows 7 ultimate version).
I will be interested to hear if your iolo system caused some issues as I do like using it for clean up on my hard drive. When I couldn't use Outlook, I went to "JustAsk.com" and paid the small fee to find out that you can repair office from the control panel programs list; this is what solved my issue.
If you haven't tried it, it's pretty easy:
Open Control Panel
Select Programs
Find Office on the programs list
RIGHT click on it
Select repair
Windows installer runs, then restart
After I did that, iPhone could see Outlook again. That could be where the registry issue is happening with iolo.
Hope this is helpful,
Cecilia

Palm TX no longer recognizes SD cards!!!

Similar Messages

Maybe you are looking for