Palm V serial to USB

I have a Palm V, XP Pro, Office outlook 2003.  I am trying to hook up my old cradle which is a serial port to my new computer which has USB ports.  I've read quite a lot of forums regarding this topic however, being technologically inept I'm finding them a little confusing.  Can someone help me simplify the process and advise how/what i need to do inorder to get my Palm V working with my laptop (step by step instructions)?  I really appreciate your help!
Post relates to: Palm V

First, check your HotSync Manager software to see if it has the "Local USB" setting as an option.  If not, download a newer version of Palm Desktop (version 4.1.4E should work) and set it for Local USB.
Second, you will need to purchase a small Serial to USB adapter, or a similar cable from a computer store or online.
If the adapter has a driver disc, be sure to run it prior to connecting your cradle.  Plug the cradle into the adapter and then into your Computer. 
Perform a Hotsync and it should work.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Setting up/syncing serial on usb palm...

    Hi all-
    I've got a Palm IIIc that I'd like to sync with my new Mini. Here's what I've got:
    Palm IIIc, Serial Cradle, [Belkin Serial to USB adapter], just bought/tried a Keyspan Serial to USB adapter, Palm Desktop 4.2.1a, iSync 2.2 (part of Mini pre-installed software).
    The Belkin I doubt will work because I couldn't get the drivers to load in OS X, so I got the Keyspan (has OS X driver & is listed on the Palm website as the only serial to USB connector for the IIIc). I believe I followed the iSync directions correctly (artnum 302120 from the KB)
    I have not tried to sync to the Palm Desktop only (will try in a few minutes). The gist is everything seems to be set correctly, but the handlheld doesn't connect with the software... Any thoughts or suggestions??
    -alex-

    This issue comes up periodically, and the best place
    to get help with it is from Keyspan. They have a
    couple of articles available explaining how to get
    this to work. In my limited experience, only the
    Keyspan and now-defunct PalmConnect devices ever
    worked in configurations such as yours. Even Palm
    Support now directs users to Keyspan for both the
    hardware and for help.
    The long term answer is, honestly, to ditch your
    serial Palm device in favor of a Palm OS 4 or 5
    handheld or smartphone, and a copy of the Missing
    Sync for Palm OS. While it may be a significant
    investment, you'll wonder after doing this why you
    waited so long…
    FWIW, I went to the Keyspan website and they have beta version drivers for Tiger and their serial/usb adapter. This has helped in that now when I press the Hotsync (or sync in iSync) the computer actually sees the PDA. However the software is not synching. All settings are correct as best I can (when I set for Palm Desktop or when I set for iSync).
    I'm not willing to get rid of a device that works perfectly well and that syncs easily with my PC at work. I'd rather Palm make updates to keep their products working...
    -alex-

  • MAX can't find serial to USB converter COM3

    Hello friends,
    I am using serial to USB converter for communicating the instruments.
    I install drivers successfully and device manager shows COM3.
    But when I go MAX 5.5 , I cannot see the COM3 port in  device and interface.
    Please tell me solution of this.

    Dennis,
    You are totally right, it was a mistake from me. We do not see com connections under data acquisition devices.
    Haris115, can you tell which drivers and which versions did you install? You can see it on MAX. And which OS are you using?
    I just want to be sure there is the correct compatibility.
    Thank you

  • Mountain Lion compatible Serial-to-USB adaptor recommendation

    Can someone recommend a Serial-to-USB adaptor that is compatible with OS X Mountain Lion.
    Thank you in advance,
    DKG

    VikingOSX wrote:
    Here is a link to a USB to DB9 solution.
    I have used that one and it works.
    Here is a similar model that I still use and it works as well:
    http://www.tripplite.com/en/products/model.cfm?txtSeriesID=782&txtModelID=3915
    That one has two RS-422 ports.
    Their drivers for Mountain Lion work perfectly, as do the earlier ones for PPC Macs. I have used it with every OS X version since Jaguar.
    It does install a kernel extension but as far as I have been able to tell, it is well-behaved and I have experienced no conflicts. The .kext is not active unless the adapter is actually connected.
    Follow the driver installation instructions carefully - the adapter must be disconnected while installing the driver or the installer package will crash. The package installer dialog tells you this.
    Here is a summary from my notes:
    Disconnect the Keyspan adapter from your Mac. If you do not disconnect the adapter, the installer package will crash.
    Open the downloaded zipfile to expand the keyspanUSAdrvr installer package.
    Read the "Important Information", authenticate when necessary, and complete the installation. The Keyspan driver is a kernel extension necessary for the Keyspan adapter to work.
    Connect the Keyspan adapter after the installer completes.
    An alert may appear indicating that "new network interfaces were detected" and need to be configured. You may ignore this alert, and you may delete the three Keyspan network interfaces that will now appear in System Preferences > Network. OS X seems to think these are dialup modem drivers. They are not used for printing. The alert will not reappear.
    A logout / login or reboot should be optional to ensure the driver is loaded. If in doubt, reboot.
    With the adapter connected and its driver correctly installed, the kernel extension will now appear in System Information as KeyspanUSAdriver.
    In Applications, locate and open Keyspan Serial Assistant. When the adapter has been connected its serial port names will appear in this window. Clicking the reveal triangle will show their names.
    KeySerial1 is an alias to the first port on the first Keyspan adapter connected to your Mac. The names USA28XxxxxP1.1 and USA28XxxxxP2.2 will change if the adapter is connected to a different USB port. Connect your serial device to Port 1 on the adapter, and use KeySerial1 for the serial port name. Otherwise it will be necessary to change the name of your serial port every time you change which USB port the Keyspan is using.
    Leave Keyspan Serial Assistant in your Applications folder since you may need it to refer to these names in the future.
    To uninstall the Keyspan driver software, open Keyspan Serial Assistant, select "Uninstall USB Serial Extension" from the Settings menu, and follow the instructions. Administrator authentication is required to uninstall the driver. The extension will then be eradicated from your system. The only remaining files are the Keyspan Serial Assistant application, the installer package, and the downloaded zipfile. To completely delete everything drag all these files to the Trash.
    Keyspan had previously labeled their OS X 10.8 driver a "beta" version, which worked fine. They since dropped the "beta" label. Hopefully this indicates they are interested in continued support. In any event I doubt any updates would be required for future OS X versions any time soon, since it is already a 64 bit driver.

  • Keyspan Serial to USB

    The Keyspan Serial to USB adapter does not work with Intel. Perhaps a new driver will fix it.

    That's right.
    Keyspan have posted a beta version of their Intel drivers at http://keyspan.custhelp.com/cgi-bin/keyspan.cfg/php/enduser/stdadp.php?pfaqid=528 which should work. It might be worth waiting for the official release though.

  • Can't open Serial port in notebook (use Serial to USB)

    OTL
    use Serial to USB and java communication 2.0, windows 2003
    and notebook which has no RS232C port
    testing desktop it is done.
    notebook does not work....
    How can i open serial port in notebook ...

    Saludos
    tengo el mismo problema, aunque he encontrado algunas
    API pero solo tienen soporte para LINUX:
    * jsr80 y
    * jUSB API
    Si tienen alguna solucion haganmela saber.In English via Babelfish (and a little common sense), in case anyone knows a solution:
    Greetings, I have the same problem, although I have found some API but they only have support for LINUX:
    * jsr80
    and
    * jUSB API
    If they have some solution I'd like to know.

  • Serial to USB connection- HP Laserjet 4MP not recognised

    I am trying to connect an HP Laserjet 4MP to my Intel iMac running OSX 10.5.8. sure its old, but it is solid and reliable. Slow does not concern me.
    The printer worked fine when last used. I have just purchased a serial to USB cable for the printer as the printer originally used AppleTalk.
    System Profile recognises the cable. The cable chip is a Prolific 2303 which I am told is Mac compatible and that seems confirmed as System Profiler lists the USB-serial controller. So why can the OS not see the printer?
    Check the HP printer drivers? Of course! So far I have downloaded and installed 2 sets of printer drivers. The first was a Laserjet and Edgline print-only.mpkg. labelled OSX. Probably too old. The second, PrinterDriverUpdate v1.1.1 (350MB) from the Apple Archive. The Archive listed the 4MP in its list of drivers contained in the package. Can’t get them to work!
    I cannot get bonjour to see the HP printer! I read elsewhere that others are using the old HP 4MP on snow Leopard so Intel and system compatibility would not seem to be a problem.
    I found the HP site murder to negotiate and finally downloaded from Apple and AppleUpdate. If you know the correct HP URL for Mac driver downloades that may help. So far I have run into so many dead ends on that site I could fill an A4 page with criticism.
    Does anyone have suggestions which may help please?
    Update. I checked the printer drivers via manual driver selection and found the HP 4 plus v2013.111 driver which worked in the past. So the driver is there, why does Bonjour not see it? I click on add printer and nothing new is found!

    Helpful response as usual thank you BDAqua.
    Network shows USB controller Not Connected. When I select and click window at left on USB controller (Which is red) the resulting dialogue box does not offer Apple talk. Just Modem,DNS, WINS, Proxies and PPP. Apple Talk is only offered for Ethernet or Airport.
    Having had a nights sleep on this problem I conclude the serial port has died.
    I think I shall return the serial cable and try connecting with a 36 pin Parallel port.
    Thank you for the thought.

  • CP2102 Serial to USB converters stopped working

    Before updating yesterday, my CP2102 Serial to USB converters would work out of the box and show up as /dev/ttyUSB0 and /dev/ttyUSB1 when plugged into my USB port
    Now they don't show up at all.
    lsusb:
    Bus 002 Device 006: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
    dmesg:
    [86552.644525] usb 2-1.4: new full-speed USB device number 6 using ehci-pci
    lsmod:
    ctr 12927 1
    ccm 17534 1
    arc4 12536 2
    rtl8192cu 66273 0
    rtl_usb 17592 1 rtl8192cu
    rtl8192c_common 44268 1 rtl8192cu
    rtlwifi 67295 3 rtl_usb,rtl8192c_common,rtl8192cu
    coretemp 12820 0
    hwmon 12930 1 coretemp
    intel_rapl 17605 0
    mac80211 648753 3 rtl_usb,rtlwifi,rtl8192cu
    iosf_mbi 12682 1 intel_rapl
    x86_pkg_temp_thermal 12951 0
    intel_powerclamp 17122 0
    mousedev 17272 0
    joydev 17063 0
    cfg80211 476584 2 mac80211,rtlwifi
    rfkill 18867 2 cfg80211
    kvm 435299 0
    crct10dif_pclmul 13394 0
    crc32_pclmul 12915 0
    crc32c_intel 21809 0
    ghash_clmulni_intel 12978 0
    aesni_intel 167997 2
    nvidia 10512002 182
    aes_x86_64 16719 1 aesni_intel
    lrw 12757 1 aesni_intel
    gf128mul 12970 1 lrw
    iTCO_wdt 12831 0
    glue_helper 12649 1 aesni_intel
    ablk_helper 12572 1 aesni_intel
    serio_raw 12849 0
    snd_hda_codec_realtek 67322 1
    i2c_i801 16965 0
    iTCO_vendor_support 12649 1 iTCO_wdt
    drm 273125 3 nvidia
    ie31200_edac 12567 0
    r8169 76869 0
    edac_core 47176 1 ie31200_edac
    cryptd 18553 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    psmouse 107442 0
    i2c_core 50240 3 drm,i2c_i801,nvidia
    evdev 21544 7
    mac_hid 12633 0
    pcspkr 12595 0
    mii 12675 1 r8169
    snd_hda_codec_hdmi 49263 4
    snd_hda_codec_generic 63087 1 snd_hda_codec_realtek
    mei_me 17987 0
    video 22205 0
    mei 75468 1 mei_me
    battery 17452 0
    thermal 17559 0
    shpchp 35210 0
    snd_hda_intel 26387 7
    snd_hda_controller 26857 1 snd_hda_intel
    snd_hda_codec 112621 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 17244 1 snd_hda_codec
    snd_pcm 88779 5 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
    soundcore 13031 2 snd,snd_hda_codec
    lpc_ich 20768 0
    button 12953 0
    processor 27777 0
    fan 12726 0
    sch_fq_codel 17343 6
    pci_stub 12429 1
    vboxpci 23139 0
    vboxnetflt 27412 0
    vboxnetadp 25443 0
    vboxdrv 352683 3 vboxnetadp,vboxnetflt,vboxpci
    ext4 514390 1
    crc16 12343 1 ext4
    mbcache 17171 1 ext4
    jbd2 86379 1 ext4
    hid_generic 12393 0
    usbhid 48596 0
    hid 110513 2 hid_generic,usbhid
    sd_mod 43575 3
    sr_mod 21903 0
    cdrom 47479 1 sr_mod
    ata_generic 12490 0
    pata_acpi 12771 0
    atkbd 22254 0
    libps2 12739 2 atkbd,psmouse
    ata_piix 33592 2
    libata 181461 3 pata_acpi,ata_generic,ata_piix
    ehci_pci 12512 0
    ehci_hcd 69979 1 ehci_pci
    scsi_mod 147395 3 libata,sd_mod,sr_mod
    usbcore 199382 5 rtl_usb,ehci_hcd,ehci_pci,usbhid,rtl8192cu
    usb_common 12561 1 usbcore
    i8042 18002 1 libps2
    serio 18282 6 serio_raw,atkbd,i8042,psmouse
    Would appreciate any help in fixing this. Thanks

    What was updated yesterday?  Was the kernel updated?  If so, did you reboot?

  • HP 10-F001UA - SM BUS CONTROLLER & UNIVERSAL SERIAL BUS (USB) CONTROLLER - WINDOWS 7

    I instaling my device with windows 7, but i missing SM BUS CONTROLLER , UNIVERSAL SERIAL BUS (USB) CONTROLLER & unknow driver, could you give me the link for that driver?

    Hi:
    I cannot find that model number anywhere.
    Does it have an Intel or AMD processor?
    If it has an Intel processor is it a 3rd or 4th generation core processor.
    Also, please do the following and I will post the link to the driver for the unknown device once I figure out what it is...
    Go to the device manager, find the Other Devices category, and click on the Unknown Device needing drivers.
    Then click on the Details tab at the top of the Unknown Device window.
    Now you see a Property drop down list and it is defaulted to Device Description.
    Drop down on that and select the second item on the list (Hardware ID's).
    Post the top string of characters you see in the window.

  • Hp pavilion 17-e051sh universal serial bus usb win7

    Hello!l
    I speak little bit english.
    Looking  driver for you next hp pavilion 17-e051sh universal serial bus usb win732bit.
    Thanx
    M.
    This question was solved.
    View Solution.

    Please see AMD Chipset Drivers (provides chipset, AHCI, and USB 3.0 drivers). Click the first item, "AMD Chipset Drivers", to download the Win7 / Win8 / 32bit / 64bit driver package.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • HP Elitebook 8460p - Universal Serial Bus (USB) Controller

    Hello,
    All my Drivers have been updated apart from One in Other Devices:
    Universal Serial Bus (USB) Controller - I am using an HP Elitebook 8460p
    If anyone could provide a driver for this to disappear.
    Thanks in advance.
    Regards,
    Antony
    This question was solved.
    View Solution.

    Hi, Antony:
    You probably need to install the usb 3.0 controller driver.
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5056943&sp...
    Best Regards,
    Paul

  • Driver: universal serial bus ( USB) controler

    I am looking for a Driver:  universal serial bus ( USB) controler
    vooe type notebook: 15-e001ed
    I hope someone can help me
    greets

    Hi:
    These are the drivers you need...
    First install the amd chipset driver and reboot.  You want the first file listed on the webpage.
    That will install the smbus controller.
    http://support.amd.com/en-us/download/chipset?os=W​indows 7 - 64
    Then for the USB 3.0, install both of these drivers.
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&sp​...
    http://h20566.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&sp​...

  • Where can I find the USB driver for the serial to USB adapter?

    I have a Palm IIIc with the serial HotSync cradle and USB adapter but I dont have the driver disc for it and was wondering if there was a page within the site here I could download it from?
    The OS platform needed for the driver is Win2000 / XP.
    TIA,
    -guitardude
    Post relates to:

    I did a Google search and found this link:
    http://www.gilsson.com/usb_drivers_download.htm
    It had the Prolific USB-to-Serial driver for WinXP. I downloaded & installed it. It created a COM5 port that my Palm Desktop found automatically. I hit the HotSync and, presto!, everything works perfectly. I only spent 5 hours trying to solve this problem for my dad.
    He hadn't HotSync'd his Palm IIIxe to his home laptop since NOV2005!! And he hadn't HotSync'd to his work PC since he retired in JUL2008 (and he doesn't have access to that PC anymore).
    I'll repeat this post in the other threads I queried on. I hope this helps someone solve their USB-to-Serial Adapter Driver problems.
    -mark
    Post relates to: Treo 650 (Sprint)

  • [Solved] serial to usb not working - gpsbabel with garmin etrex

    I'm trying to transfer some data from an old garmin etrex gps via a serial cable (Startech.com 1 Port FTDI USB to Serial RS232 Adapter Cable with COM Retention) which claims to work with linux.
    However, I try:
    $ sudo gpsbabel -i garmin -f /dev/ttyUSB0 -o gpx -F /home/adam/mygpx.gpx
    and get -
    GPS_Packet_Read: No DLE. Data received, but probably not a garmin packet.
    GARMIN:Can't init /dev/ttyUSB0
    I seem to remember that this unit held garmin data, but instead I try -i gpx and the whole thing seems to hang for a very long time.
    $ dmesg shows:
    [ 2103.214817] usb 1-3: new full-speed USB device number 6 using xhci_hcd
    [ 2103.441386] usbcore: registered new interface driver usbserial
    [ 2103.441397] usbcore: registered new interface driver usbserial_generic
    [ 2103.441405] usbserial: USB Serial support registered for generic
    [ 2103.444029] usbcore: registered new interface driver ftdi_sio
    [ 2103.444039] usbserial: USB Serial support registered for FTDI USB Serial Device
    [ 2103.444095] ftdi_sio 1-3:1.0: FTDI USB Serial Device converter detected
    [ 2103.444119] usb 1-3: Detected FT232RL
    [ 2103.444293] usb 1-3: FTDI USB Serial Device converter now attached to ttyUSB0
    Is there anyway I can start trying to read data from this device, or any tips to see what I can get out from this?
    TIA
    Last edited by kabads (2015-05-02 10:39:06)

    OK - worked this one out in the end. Changed the type of data on the garmin etrex itself to 'garmin' and then gpsbabel worked fine.

  • Serial to USB Converter?

    I'm assisting a friend in switching his current (very old PC) network to an wireless network.
    As well as very compatible USB laser printer, he also has a serial-cabled dot matrix printer which he would rather not lose.
    If I were to hook this up to an Airport Express via a USB/Serial converter, would this work out okay, or does the Airport demand USB-native devices?

    the airport express usb port will only support printers. i have a printer / scanner / fax / copier combo device thing and it will only let me use the print wirelessly.
    using a converter will mean you plug the converter into the airport express which is not supported.
    im afraid this ones not gonna be ewasy for you

Maybe you are looking for